scholarly journals Retraction: Bruder, L. et al. Transcatheter Decellularized Tissue-Engineered Heart Valve (dTEHV) Grown on Polyglycolic Acid (PGA) Scaffold Coated with P4HB Shows Improved Functionality over 52 Weeks due to Polyether-Ether-Ketone (PEEK) Insert. J. Funct. Biomater. 2018, 9(4), 64

2019 ◽  
Vol 10 (1) ◽  
pp. 8
Author(s):  
Leon Bruder ◽  
Kerstin Brakmann ◽  
Valentin Stegner ◽  
Matthias Sigler ◽  
Felix Berger ◽  
...  
Keyword(s):  
Experimental Data ◽  
Heart Valve ◽  
Human Error ◽  
Polyglycolic Acid ◽  
Polyether Ether Ketone ◽  
Tissue Engineered Heart Valve ◽  
Ether Ketone ◽  
Decellularized Tissue

Due to human error, the authors included some of the experimental data in this article [...]

scholarly journals Transcatheter Decellularized Tissue-Engineered Heart Valve (dTEHV) Grown on Polyglycolic Acid (PGA) Scaffold Coated with P4HB Shows Improved Functionality over 52 Weeks due to Polyether-Ether-Ketone (PEEK) Insert

2018 ◽  
Vol 9 (4) ◽  
pp. 64 ◽  
Author(s):  
Leon Bruder ◽  
Hendrik Spriestersbach ◽  
Kerstin Brakmann ◽  
Valentin Stegner ◽  
Matthias Sigler ◽  
...  
Keyword(s):  
Heart Valve ◽  
Second Generation ◽  
Heart Defects ◽  
Polyglycolic Acid ◽  
Elastic Fibers ◽  
Polyether Ether Ketone ◽  
Tissue Engineered Heart Valve ◽  
Ether Ketone ◽  
Decellularized Tissue

Many congenital heart defects and degenerative valve diseases require replacement of heart valves in children and young adults. Transcatheter xenografts degenerate over time. Tissue engineering might help to overcome this limitation by providing valves with ability for self-repair. A transcatheter decellularized tissue-engineered heart valve (dTEHV) was developed using a polyglycolic acid (PGA) scaffold. A first prototype showed progressive regurgitation after 6 months in-vivo due to a suboptimal design and misguided remodeling process. A new geometry was developed accordingly with computational fluid dynamics (CFD) simulations and implemented by adding a polyether-ether-ketone (PEEK) insert to the bioreactor during cultivation. This lead to more belly-shaped leaflets with higher coaptation areas for this second generation dTEHV. Valve functionality assessed via angiography, intracardiac echocardiography, and MRI proved to be much better when compared the first generation dTEHV, with preserved functionality up to 52 weeks after implantation. Macroscopic findings showed no thrombi or signs of acute inflammation. For the second generation dTEHV, belly-shaped leaflets with soft and agile tissue-formation were seen after explantation. No excessive leaflet shortening occurred in the second generation dTEHV. Histological analysis showed complete engraftment of the dTEHV, with endothelialization of the leaflets and the graft wall. Leaflets consisted of collagenous tissue and some elastic fibers. Adaptive leaflet remodeling was visible in all implanted second generation dTEHV, and most importantly no fusion between leaflet and wall was found. Very few remnants of the PGA scaffold were detected even 52 weeks after implantation, with no influence on functionality. By adding a polyether-ether-ketone (PEEK) insert to the bioreactor construct, a new geometry of PGA-scaffold based dTEHV could be implemented. This resulted in very good valve function of the implanted dTEHV over a period of 52 weeks.

scholarly journals Decellularized Tissue-Engineered Heart Valve Leaflets with Recellularization Potential

2013 ◽  
Vol 19 (5-6) ◽  
pp. 759-769 ◽  
Author(s):  
Zeeshan H. Syedain ◽  
Allison R. Bradee ◽  
Stefan Kren ◽  
Doris A. Taylor ◽  
Robert T. Tranquillo
Keyword(s):  
Heart Valve ◽  
Tissue Engineered Heart Valve ◽  
Decellularized Tissue

Fatigue Modeling for Polyether Ether Ketone (PEEK) With Mean Strain Effects

2015 ◽  
Author(s):  
Rakish Shrestha ◽  
Jutima Simsiriwong ◽  
Nima Shamsaei
Keyword(s):  
Experimental Data ◽  
Fatigue Life ◽  
Cyclic Loading ◽  
Stress Responses ◽  
Fatigue Behavior ◽  
Fatigue Tests ◽  
Cyclic Loading Condition ◽  
Polyether Ether Ketone ◽  
Ether Ketone ◽  
Mean Strain

In this study, the fatigue behavior of a polyether ether ketone (PEEK) polymer was investigated under uniaxial strain-controlled conditions with and without mean strain. Experimental study included a series of fully-reversed fatigue tests at five strain amplitudes (2%, 2.5%, 3%, 3.5%, and 4%) and fatigue tests at three mean strain values (2%, 2.5%, and 3%) at various frequencies. Stress responses of PEEK obtained from the tests under fully-reversed cyclic loading condition indicated a significant cyclic softening, while a stress relaxation was observed for the PEEK specimens under mean strain cyclic loading. Two different types of fatigue models, including a strain-based (Coffin-Manson) and energy-based, were employed to correlate fatigue life obtained from all experimental data. Among the two fatigue models, the fatigue life prediction using the energy-based approach was found to provide a better correlation to PEEK experimental data for both fully-reversed and mean strain conditions when compared to the Coffin-Manson model.

scholarly journals Encapsulation of Capacitive Micromachined Ultrasonic Transducers (CMUTs) for the Acoustic Communication between Medical Implants

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 421
Author(s):  
Jorge Oevermann ◽  
Peter Weber ◽  
Steffen H. Tretbar
Keyword(s):  
Data Security ◽  
Ultrasonic Transducers ◽  
Surrounding Tissue ◽  
Center Frequency ◽  
Medical Implants ◽  
Research Groups ◽  
Capacitive Micromachined Ultrasonic Transducers ◽  
Polyether Ether Ketone ◽  
High Bandwidth ◽  
Ether Ketone

The aim of this work was to extend conventional medical implants by the possibility of communication between them. For reasons of data security and transmitting distances, this communication should be realized using ultrasound, which is generated and detected by capacitive micromachined ultrasonic transducers (CMUTs). These offer the advantage of an inherent high bandwidth and a high integration capability. To protect the surrounding tissue, it has to be encapsulated. In contrast to previous results of other research groups dealing with the encapsulation of CMUTs, the goal here is to integrate the CMUT into the housing of a medical implant. In this work, CMUTs were designed and fabricated for a center frequency of 2 MHz in water and experimentally tested on their characteristics for operation behind layers of Polyether ether ketone (PEEK) and titanium, two typical materials for the housings of medical implants. It could be shown that with silicone as a coupling layer it is possible to operate a CMUT behind the housing of an implant. Although it changes the characteristics of the CMUT, the setup is found to be well suited for communication between two transducers over a distance of at least 8 cm.

scholarly journals Mechanical and Degradation Properties of Hybrid Scaffolds for Tissue Engineered Heart Valve (TEHV)

2021 ◽  
Vol 12 (1) ◽  
pp. 20
Author(s):  
Rabia Nazir ◽  
Arne Bruyneel ◽  
Carolyn Carr ◽  
Jan Czernuszka
Keyword(s):  
Heart Valve ◽  
Crosslinking Density ◽  
Biomechanical Properties ◽  
Collagen Type I ◽  
Type I ◽  
Aortic Heart Valve ◽  
Tissue Engineered Heart Valve ◽  
Human Aortic Valve ◽  
Degradation Properties ◽  
Hybrid Scaffolds

In addition to biocompatibility, an ideal scaffold for the regeneration of valvular tissue should also replicate the natural heart valve extracellular matrix (ECM) in terms of biomechanical properties and structural stability. In our previous paper, we demonstrated the development of collagen type I and hyaluronic acid (HA)-based scaffolds with interlaced microstructure. Such hybrid scaffolds were found to be compatible with cardiosphere-derived cells (CDCs) to potentially regenerate the diseased aortic heart valve. This paper focused on the quantification of the effect of crosslinking density on the mechanical properties under dry and wet conditions as well as degradation resistance. Elastic moduli increased with increasing crosslinking densities, in the dry and wet state, for parent networks, whereas those of interlaced scaffolds were higher than either network alone. Compressive and storage moduli ranged from 35 ± 5 to 95 ± 5 kPa and 16 ± 2 kPa to 113 ± 6 kPa, respectively, in the dry state. Storage moduli, in the dry state, matched and exceeded those of human aortic valve leaflets (HAVL). Similarly, degradation resistance increased with increasing the crosslinking densities for collagen-only and HA-only scaffolds. Interlaced scaffolds showed partial degradation in the presence of either collagenase or hyaluronidase as compared to when exposed to both enzymes together. These results agree with our previous findings that interlaced scaffolds were composed of independent collagen and HA networks without crosslinking between them. Thus, collagen/HA interlaced scaffolds have the potential to fill in the niche for designing an ideal tissue engineered heart valve (TEHV).

scholarly journals Interfacial Fracture Toughness Comparison of Three Indirect Resin Composites to Dentin and Polyether Ether Ketone Polymer

2020 ◽  
Vol 14 (03) ◽  
pp. 456-461
Author(s):  
Rayhaneh Khalesi ◽  
Mahdi Abbasi ◽  
Zahra Shahidi ◽  
Masoumeh Hasani Tabatabaei ◽  
Zohreh Moradi
Keyword(s):  
Fracture Toughness ◽  
Bond Strength ◽  
Testing Machine ◽  
Composite Resins ◽  
High Wear Resistance ◽  
Luting Cements ◽  
Anterior Teeth ◽  
Polyether Ether Ketone ◽  
Ether Ketone

Abstract Objectives Advances in laboratory composites and their high wear resistance and fracture toughness have resulted in their growing popularity and increasing use for dental restorations. This study sought to assess the fracture toughness of three indirect composites bonded to dental substrate and polyether ether ketone (PEEK) polymer. Materials and Methods This in vitro study was conducted on two groups of dental and polymer substrates. Each substrate was bonded to three indirect composite resins. Sixty blocks (3 × 3 × 12 mm) were made of sound bovine anterior teeth and PEEK polymer. Sixty blocks (3 × 3 × 12 mm) were fabricated of CRIOS (Coltene, Germany), high impact polymer composite (HIPC; Bredent, Germany), and GRADIA (Indirect; GC, Japan) composite resins. Composites were bonded to dentin using Panavia F 2.0 (Kuraray, Japan). For bonding to PEEK, Combo.lign (Bredent) and Visio.Link (Bredent) luting cements were used. In all samples, a single-edge notch was created by a no. 11 surgical blade at the interface. The samples were subjected to 3,500 thermal cycles, and their fracture toughness was measured in a universal testing machine (Zwick/Roell, Germany) by application of four-point flexural load. Statistical Analysis Data were analyzed using one-way analysis of variance, Kruskal–Wallis. Results The fracture toughness of CRIOS–PEEK interface was significantly higher than HIPC–PEEK. The fracture toughness of GRADIA–PEEK was not significantly different from that of HIPC and CRIOS. The fracture toughness of GRADIA–dentin was significantly higher than HIPC–dentin. Conclusion Considering the limitations of this study, GRADIA has the highest bond strength to dentin, while CRIOS shows the highest bond strength to PEEK.

scholarly journals Adhesion Behaviour of Primary Human Osteoblasts and Fibroblasts on Polyether Ether Ketone Compared with Titanium under In Vitro Lipopolysaccharide Incubation

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2739 ◽  
Author(s):  
Korbinian Benz ◽  
Andreas Schöbel ◽  
Marisa Dietz ◽  
Peter Maurer ◽  
Jochen Jackowski
Keyword(s):  
Gene Expression ◽  
Protein Level ◽  
Binding Protein ◽  
Sem Images ◽  
Human Osteoblasts ◽  
Polyether Ether Ketone ◽  
Primary Human Osteoblasts ◽  
Titanium Surfaces ◽  
Ether Ketone

The aim of this in vitro pilot study was to analyse the adhesion behaviour of human osteoblasts and fibroblasts on polyether ether ketone (PEEK) when compared with titanium surfaces in an inflammatory environment under lipopolysaccharide (LPS) incubation. Scanning electron microscopy (SEM) images of primary human osteoblasts/fibroblasts on titanium/PEEK samples were created. The gene expression of the LPS-binding protein (LBP) and the LPS receptor (toll-like receptor 4; TLR4) was measured by real-time polymerase chain reaction (PCR). Immunocytochemistry was used to obtain evidence for the distribution of LBP/TLR4 at the protein level of the extra-cellular-matrix-binding protein vinculin and the actin cytoskeleton. SEM images revealed that the osteoblasts and fibroblasts on the PEEK surfaces had adhesion characteristics comparable to those of titanium. The osteoblasts contracted under LPS incubation and a significantly increased LBP gene expression were detected. This was discernible at the protein level on all the materials. Whereas no increase of TLR4 was detected with regard to mRNA concentrations, a considerable increase in the antibody reaction was detected on all the materials. As is the case with titanium, the colonisation of human osteoblasts and fibroblasts on PEEK samples is possible under pro-inflammatory environmental conditions and the cellular inflammation behaviour towards PEEK is lower than that of titanium.

Sign in / Sign up

Export Citation Format

Share Document