scholarly journals Dendrite Morphology Evolution of Al6Mn Phase in Suction Casting Al–Mn Alloys

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2388
Author(s):  
Zhongwei Chen ◽  
Yue Hou ◽  
Bin Xie ◽  
Qi Zhang
Keyword(s):  
Electron Microscope ◽  
Cooling Rate ◽  
Dominant Role ◽  
Icosahedral Quasicrystal ◽  
Dendrite Morphology ◽  
Equiaxed Dendrite ◽  
Suction Casting ◽  
X Ray ◽  
Transmission Electron ◽  
Mn Content

The effects of solute element content and cooling rate on the morphology of Al6Mn phase in suction casting Al–Mn alloys were investigated by transmission electron microscope, scanning electron microscope, and X-ray diffractometer. Results show that Al6Mn dendrite morphology with different degrees of development can occur in the microstructure of as-cast Al–Mn alloys. For the Al–4 wt.% Mn alloy, there are small amounts of block Al6Mn crystals at the center of sample, while we see a block Al6Mn phase and a feathery Al6Mn phase in the sample of Al–6 wt.% Mn alloy. Moreover, the block Al6Mn phases in the Al–8 wt.% Mn alloy disappear, and only snowflake-like Al6Mn phases play a dominant role in the microstructure. However, with an increase in Mn content to 10 wt.%, more dendritic trunks are formed, and secondary dendrite arms are degraded more seriously due to the formation of an icosahedral quasicrystal in suction casting. In addition to the effect of Mn content on Al6Mn morphology, with the increase in cooling rate from the center to the edge of samples, the outline diameter of equiaxed dendrite decreases. The evolution of Al6Mn dendrite morphology and the formation of quasicrystal are further discussed.

X-ray microanalysis of thin specimens in the transmission electron microscope at voltages up to 1000 Kv.

1978 ◽  
Vol 36 (1) ◽  
pp. 540-541
Author(s):  
G. Cliff ◽  
M.J. Nasir ◽  
G.W. Lorimer ◽  
N. Ridley
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Weight Fraction ◽  
Present Series ◽  
Constant Independent ◽  
X Ray ◽  
Transmission Electron ◽  
Series Of Experiments ◽  
Image Position ◽  
X Ray Absorption

In a specimen which is transmission thin to 100 kV electrons - a sample in which X-ray absorption is so insignificant that it can be neglected and where fluorescence effects can generally be ignored (1,2) - a ratio of characteristic X-ray intensities, I1/I2 can be converted into a weight fraction ratio, C1/C2, using the equationwhere k12 is, at a given voltage, a constant independent of composition or thickness, k12 values can be determined experimentally from thin standards (3) or calculated (4,6). Both experimental and calculated k12 values have been obtained for K(11<Z>19),kα(Z>19) and some Lα radiation (3,6) at 100 kV. The object of the present series of experiments was to experimentally determine k12 values at voltages between 200 and 1000 kV and to compare these with calculated values.The experiments were carried out on an AEI-EM7 HVEM fitted with an energy dispersive X-ray detector.

Aspects of microanalysis in a transmission electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 510-511
Author(s):  
R. Sinclair ◽  
B.E. Jacobson
Keyword(s):  
Grain Size ◽  
Electron Beam ◽  
Electron Microscope ◽  
Chemical Analysis ◽  
Transmission Electron Microscope ◽  
Vapor Deposition ◽  
Critical Currents ◽  
X Ray ◽  
Fine Grain ◽  
Transmission Electron

INTRODUCTIONThe prospect of performing chemical analysis of thin specimens at any desired level of resolution is particularly appealing to the materials scientist. Commercial TEM-based systems are now available which virtually provide this capability. The purpose of this contribution is to illustrate its application to problems which would have been intractable until recently, pointing out some current limitations.X-RAY ANALYSISIn an attempt to fabricate superconducting materials with high critical currents and temperature, thin Nb3Sn films have been prepared by electron beam vapor deposition [1]. Fine-grain size material is desirable which may be achieved by codeposition with small amounts of Al2O3 . Figure 1 shows the STEM microstructure, with large (∽ 200 Å dia) voids present at the grain boundaries. Higher quality TEM micrographs (e.g. fig. 2) reveal the presence of small voids within the grains which are absent in pure Nb3Sn prepared under identical conditions. The X-ray spectrum from large (∽ lμ dia) or small (∽100 Ǻ dia) areas within the grains indicates only small amounts of A1 (fig.3).

Thickness and composition determinations from T.E.M. specimens using both x-ray and backscattered electron data

1984 ◽  
Vol 42 ◽  
pp. 576-577
Author(s):  
M.D. Ball ◽  
H. Lagace ◽  
M.C. Thornton
Keyword(s):  
Electron Microscope ◽  
Atomic Number ◽  
Transmission Electron Microscope ◽  
Convenient Method ◽  
Flow Chart ◽  
X Ray ◽  
Intensity Measurements ◽  
Transmission Electron ◽  
Electron Intensity ◽  
Backscattered Electron

The backscattered electron coefficient η for transmission electron microscope specimens depends on both the atomic number Z and the thickness t. Hence for specimens of known atomic number, the thickness can be determined from backscattered electron coefficient measurements. This work describes a simple and convenient method of estimating the thickness and the corrected composition of areas of uncertain atomic number by combining x-ray microanalysis and backscattered electron intensity measurements.The method is best described in terms of the flow chart shown In Figure 1. Having selected a feature of interest, x-ray microanalysis data is recorded and used to estimate the composition. At this stage thickness corrections for absorption and fluorescence are not performed.

High Spatial Resolution Compositional Analysis at Interfaces

1980 ◽  
Vol 38 ◽  
pp. 356-359
Author(s):  
John B. Vander Sande ◽  
Thomas F. Kelly ◽  
Douglas Imeson
Keyword(s):  
Electron Microscope ◽  
High Spatial Resolution ◽  
Compositional Analysis ◽  
Scanning Transmission Electron Microscope ◽  
Thin Specimen ◽  
X Ray ◽  
Volume Of Interest ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Electron Energy Loss

In the scanning transmission electron microscope (STEM) a fine probe of electrons is scanned across the thin specimen, or the probe is stationarily placed on a volume of interest, and various products of the electron-specimen interaction are then collected and used for image formation or microanalysis. The microanalysis modes usually employed in STEM include, but are not restricted to, energy dispersive X-ray analysis, electron energy loss spectroscopy, and microdiffraction.

Luminescent Properties of Gd2MoO6:Eu3+ Nanophosphor for WLEDs

2021 ◽  
Author(s):  
Yan Chen ◽  
Yuemei Lan ◽  
Dong Wang ◽  
Guoxing Zhang ◽  
Wenlong Peng ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Transmission Electron Microscope ◽  
Fluorescence Spectra ◽  
Solvothermal Method ◽  
Luminescent Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

A series of Gd2-xMoO6:xEu3+(x=0.18-0.38) nanophosphors were synthesized by the solvothermal method. The properties of this nanophosphor were characterized by x-ray diffraction (XRD), transmission electron microscope (TEM), fluorescence spectra and diffuse...

Formation of Graphite Encapsulated Nickel Nanoparticles by Ball Milling and Annealing of Expanded Graphite with Nickel

2011 ◽  
Vol 80-81 ◽  
pp. 217-220 ◽  
Author(s):  
Xue Qing Yue ◽  
Hai Jun Fu ◽  
Da Jun Li
Keyword(s):  
Electron Microscope ◽  
Ball Milling ◽  
Transmission Electron Microscope ◽  
Nickel Nanoparticles ◽  
Size Range ◽  
Expanded Graphite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Powders ◽  
Transmission Electron

Graphite encapsulated nickel nanoparticles were prepared by ball milling andsubsequently annealing a mixture of expanded graphite with nickel powders. The products were characterized by transmission electron microscope and X-ray diffraction. The formation mechanism of the products was discussed. Results show that the products have a size range of 20-150 nm. The graphite and nickel in the products all exhibit a high crystallinity.

Microtexture of shock reaction products of niobium and silica mixtures

1999 ◽  
Vol 14 (7) ◽  
pp. 3169-3174 ◽  
Author(s):  
Reiko Murao ◽  
Masae Kikuchi ◽  
Kiyoto Fukuoka ◽  
Eiji Aoyagi ◽  
Toshiyuki Atou ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Microscope ◽  
Shock Compression ◽  
Pressure Range ◽  
Reaction Products ◽  
Small Particles ◽  
Powder Mixtures ◽  
X Ray ◽  
Transmission Electron

Shock compression experiments on powder mixtures of niobium metal and quartz were conducted for the pressure range of 30–40 GPa by a 25-mm single-stage propellant gun. Chemical reaction occurred above 35 GPa, and products were found to be mainly so-called “Cu3Au-type” Nb3Si, which contained a small amount of oxygen. Microtextures of the specimen were examined by scanning and transmission electron microscopy. A field-emission transmission electron microscope was used for energy-dispersive x-ray analysis of microtextures in small particles found in the SiO2 matrix, and various species with different Nb/Si ratio and oxygen content were shown to be produced through the nonequilibrium process of shock compression.

X-ray microanalysis of intracellular ions in the anaerobic halophilic eubacterium Haloanaerobium praevalens

1997 ◽  
Vol 43 (6) ◽  
pp. 588-592 ◽  
Author(s):  
Aharon Oren ◽  
Mikal Heldal ◽  
Svein Norland
Keyword(s):  
Electron Microscope ◽  
High Variability ◽  
Sodium Potassium ◽  
X Ray ◽  
Ion Concentrations ◽  
Major Cation ◽  
Transmission Electron ◽  
Intracellular Ion Concentrations ◽  
Intracellular Ions ◽  
Chloride Concentrations

The intracellular concentrations of Na+, K+, and Cl− of the anaerobic halophilic eubacterium Haloanaerobium praevalens were assayed by means of X-ray microanalysis with the transmission electron microscope. Apparent intracellular cation concentrations between 1.22 and 1.91 M and chloride concentrations of 0.93–1.57 M were measured in cells growing exponentially in 2.6 M total salts. In exponentially growing cells, K+ was the major cation (70% of the cation sum). Stationary phase cells showed a high variability among individual cells, some of the cells containing higher Na+ than K+ concentrations.Key words: Haloanaerobium praevalens, intracellular ion concentrations, sodium, potassium, X-ray microanalysis.

Solvothermal Synthesis of Bi2Se3 Hexagonal Nanosheet Crystals

2011 ◽  
Vol 236-238 ◽  
pp. 1712-1716 ◽  
Author(s):  
Hai Tao Liu ◽  
Jun Dai ◽  
Jia Jia Zhang ◽  
Wei Dong Xiang
Keyword(s):  
Electron Microscope ◽  
Solvothermal Synthesis ◽  
Solvothermal Method ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Uniform Size ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Scanning Electron

Bismuth selenide (Bi2Se3) hexagonal nanosheet crystals with uniform size were successfully prepared via a solvothermal method at 160°C for 22 h using bismuth trichloride(BiCl3) and selenium powder(Se) as raw materials, sodium bisulfite(NaHSO3) as a reducing agent, diethylene glycol(DEG) as solvent, and ammonia as pH regulator. Various techniques such as X-ray diffraction (XRD), field-emission scanning electron microscope (FESEM), high-resolution transmission electron microscope (HRTEM), and selected area electron diffraction (SAED) were used to characterize the obtained products. Results show that the as-synthesized samples are pure Bi2Se3 hexagonal nanosheet crystals. A possible growth mechanism for Bi2Se3 hexagonal nanosheet crystals is also discussed based on the experiment.

Template Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation Method

2011 ◽  
Vol 311-313 ◽  
pp. 1713-1716 ◽  
Author(s):  
Yan Rong Sun ◽  
Tao Fan ◽  
Chang An Wang ◽  
Li Guo Ma ◽  
Feng Liu
Keyword(s):  
Electron Microscope ◽  
Chondroitin Sulfate ◽  
Aspartic Acid ◽  
Transmission Electron Microscope ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Transmission Electron ◽  
Co Precipitation

Nano-hydroxyapatite with different morphology was synthesized by the co-precipitation method coupled with biomineralization using Ca(NO3)2•4H2O and (NH4)2HPO4 as reagents, adding chondroitin sulfate, agarose and aspartic acid as template. The structure and morphology of the prepared powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM).

Sign in / Sign up

Export Citation Format

Share Document