scholarly journals The Effect of Geometrical Non-Linearity on the Crashworthiness of Thin-Walled Conical Energy-Absorbers

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4857
Author(s):  
Michal Rogala ◽  
Jakub Gajewski ◽  
Miroslaw Ferdynus
Keyword(s):  
Energy Absorption ◽  
Wall Thickness ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Cross Sectional ◽  
Variable Wall Thickness ◽  
Thin Walled ◽  
Variable Wall ◽  
Energy Absorbers ◽  
Energy Absorbing

Crashworthiness of conical shells is known to depend on various factors. This study sets out to determine the extent to which the cross-sectional diameter contributes to their energy-absorbing properties. The object of the study was thin-walled aluminium tubes varying in upper diameter and wall thickness. The components were subjected to dynamic axial crushing kinetic energy equal to 1700 J. The numerical analysis was performed using Abaqus 6.14 software. The specific aim of the study was to determine the extent to which variable wall thickness affects the energy absorption capacity of the components under study. From the simulations, we have managed to establish a relationship between total energy absorption capacity and wall thickness. The results from the conducted analyses and the purpose-specific neural networks could provide the base for the future methodology for forecasting and optimisation of energy-absorbing systems.

Energy-Absorbing Characteristics of the Stiffened Thin-Walled Tubes Subjected to Axial Crushing

2013 ◽  
Vol 437 ◽  
pp. 158-163
Author(s):  
Wei Liang Dai ◽  
Xu Guang Li ◽  
Qing Chun Wang
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Absorption Capacity ◽  
Test Results ◽  
Energy Absorption Capacity ◽  
Specific Energy Absorption ◽  
Axial Crushing ◽  
The Mean ◽  
Thin Walled ◽  
Energy Absorbing

Energy absorbing characteristics of the non-stiffened and stiffened single hat sections subjected to quasi-static axial crushing were experimentally investigated. First non-stiffened hat sections were axially crushed, then structures with different stiffened methods (stiffened in hat and stiffened in the plate) were tested, finally energy absorption capacities of these structures were compared. Test results showed that, for the appropriate designed stiffened tube, the mean crush force and mass specific energy absorption were increased significantly compared to the non-stiffened. Stiffened in hat section showed a little more energy absorption capacity than that stiffened in the plate, but the structure may sustain a global bending.

Numerical Simulation on Bending Characteristics of Aluminium Foam Filled Thin-Walled Tubes

2011 ◽  
Vol 213 ◽  
pp. 88-92 ◽  
Author(s):  
Qing Chun Wang ◽  
Hao Long Niu ◽  
Guo Quan Wang ◽  
Yu Xin Wang
Keyword(s):  
Energy Absorption ◽  
Absorption Capacity ◽  
Aluminium Foam ◽  
Bending Energy ◽  
Energy Absorption Capacity ◽  
Thin Walled Structures ◽  
Foam Filling ◽  
Foam Filled ◽  
Thin Walled ◽  
Energy Absorbing

Different aluminum foam filling lengths were used to increase the bending energy absorbing capacity of the popularly used hat sections. Bending energy-absorption performance of the thin-walled tubes was numerically studied by explicit non-linear software LS-Dyna. First empty hat section subjected to quasi-static bending crushing was simulated, then structures with different aluminium foam filling lengths were calculated, finally energy absorption capacity of these structures were compared. Calculation results showed that, the internal energy absorbed and mass specific energy absorption capacity of foam filled thin walled structures were increased significantly compared to the empty sections. The reason of the improvement was mainly due to the contact of the aluminium foam and the structure. Aluminium foam filling is a promising method for improving lateral energy absorbing capacity of thin-walled sections.

Numerical Investigation of Cross-Section on Aluminum A6063 Thin-Walled Structures under Low-Velocity Impact Loading

2014 ◽  
Vol 1019 ◽  
pp. 96-102
Author(s):  
Ali Taherkhani ◽  
Ali Alavi Nia
Keyword(s):  
Energy Absorption ◽  
Cross Section ◽  
Cross Sections ◽  
Peak Load ◽  
Circular Cross Section ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled Structures ◽  
Thin Walled ◽  
Crush Strength

In this study, the energy absorption capacity and crush strength of cylindrical thin-walled structures is investigated using nonlinear Finite Elements code LS-DYNA. For the thin-walled structure, Aluminum A6063 is used and its behaviour is modeled using power-law equation. In order to better investigate the performance of tubes, the simulation was also carried out on structures with other types of cross-sections such as triangle, square, rectangle, and hexagonal, and their results, namely, energy absorption, crush strength, peak load, and the displacement at the end of tubes was compared to each other. It was seen that the circular cross-section has the highest energy absorption capacity and crush strength, while they are the lowest for the triangular cross-section. It was concluded that increasing the number of sides increases the energy absorption capacity and the crush strength. On the other hand, by comparing the results between the square and rectangular cross-sections, it can be found out that eliminating the symmetry of the cross-section decreases the energy absorption capacity and the crush strength. The crush behaviour of the structure was also studied by changing the mass and the velocity of the striker, simultaneously while its total kinetic energy is kept constant. It was seen that the energy absorption of the structure is more sensitive to the striker velocity than its mass.

Excellent energy absorption capacity of nanostructured Cu–Zn thin-walled tube

2014 ◽  
Vol 599 ◽  
pp. 141-144 ◽  
Author(s):  
M. Afrasiab ◽  
G. Faraji ◽  
V. Tavakkoli ◽  
M.M. Mashhadi ◽  
A.R. Bushroa
Keyword(s):  
Energy Absorption ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled Tube ◽  
Thin Walled

Composite Core Cross Tube Crushing Analysis

2020 ◽  
Author(s):  
Sean Jenson ◽  
Muhammad Ali ◽  
Khairul Alam
Keyword(s):  
Energy Absorption ◽  
Compressive Loading ◽  
Deformation Mode ◽  
High Energy ◽  
Absorption Capacity ◽  
Functionally Graded ◽  
Layer By Layer ◽  
Thin Walled ◽  
The Cross ◽  
Energy Absorbing

Abstract Thin walled axial members are typically used in automobiles’ side and front chassis to improve crashworthiness of vehicles. Extensive work has been done in exploring energy absorbing characteristics of thin walled structural members under axial compressive loading. The present study is a continuation of the work presented earlier on evaluating the effects of inclusion of functionally graded cellular structures in thin walled members under axial compressive loading. A compact functionally graded composite cellular core was introduced inside a cross tube with side length and wall thickness of 25.4 mm and 3.048 mm, respectively. The parameters governing the energy absorbing characteristics such as deformation or collapsing modes, crushing/ reactive force, plateau stress level, and energy curves, were evaluated. The results showed that the inclusion of composite graded cellular structure increased the energy absorption capacity of the cross tube significantly. The composite graded structure underwent progressive stepwise, layer by layer, crushing mode and provided lateral stability to the cross tube thus delaying local tube wall collapse and promoting large localized folds on the tube’s periphery as compared to highly localized and compact deformation modes that were observed in the empty cross tube under axial compressive loading. The variation in deformation mode resulted in enhanced stiffness of the composite structure, and therefore, high energy absorption by the structure. This aspect has a potential to be exploited to improve the crashworthiness of automobile structures.

scholarly journals Energy Absorption Capability of Thin-Walled Prismatic Aluminum Tubes with Spherical Indentations

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4304
Author(s):  
Miroslaw Ferdynus ◽  
Patryk Rozylo ◽  
Michal Rogala
Keyword(s):  
Aluminum Alloy ◽  
Energy Absorption ◽  
Numerical Models ◽  
Energy System ◽  
High Energy ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Numerical Tests ◽  
Thin Walled ◽  
Crushing Behavior

The paper presents the results of numerical tests of impact and energy absorption capacity of thin-walled columns, subjected to axial impact loading, made of aluminum alloy, and having a square cross-section and spherical indentations on their lateral surfaces. The numerical models were validated using an experiment that was conducted on the Instron CEAST 9350 High Energy System drop hammer. Material properties of the applied aluminum alloy were determined on the basis of a static tension test. The crushing behavior of the columns and some crashworthiness indicators were investigated. On the basis of the results of the conducted analyses, conclusions were drawn about the most beneficial design/constructional variants in terms of achieved crashworthiness parameters.

Energy absorption capacity for thin-walled AM60 castings using a shear-bolt principle

2007 ◽  
Vol 85 (1-2) ◽  
pp. 89-101 ◽  
Author(s):  
Cato Dørum ◽  
Odd Sture Hopperstad ◽  
Odd-Geir Lademo ◽  
Magnus Langseth
Keyword(s):  
Energy Absorption ◽  
Absorption Capacity ◽  
Energy Absorption Capacity ◽  
Thin Walled

Key Performance Indicators of Tubes Used as Energy Absorbers

2014 ◽  
Vol 626 ◽  
pp. 155-161 ◽  
Author(s):  
T.X. Yu ◽  
Yan Fei Xiang ◽  
Min Wang ◽  
Li Ming Yang
Keyword(s):  
Energy Absorption ◽  
Carrying Capacity ◽  
Performance Indicators ◽  
Key Performance Indicators ◽  
Absorption Capacity ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Engineering Designs ◽  
Energy Absorbers ◽  
Energy Absorbing

Based on our extensive studies on the experimental, theoretical and numerical results on various tubes under axial compression/impact in the last few years, we propose a set of Key Performance Indicators (KPIs) to assess and compare the energy absorbing performance of tubular structures with various configurations, so as to guide the design of energy absorbers whilst to archive a certain degree of optimization. The KPIs have five factors: Effective stroke ratio (ESR), Non-dimensional Load-carrying capacity (NLC), Effectiveness of energy absorption (EEA), Specific energy absorption capacity (SEA), Stableness of load-carrying capacity (SLC).The paper presents a series of diagrams to compare the energy absorbing performance of various tubes in terms of the four KPIs as described above. The work is valuable to engineering designs and applications, as well as to the further studies of the topic.

Sign in / Sign up

Export Citation Format

Share Document