scholarly journals The Effect of Brilliant Blue-Based Plaque-Staining Agents on Aesthetic Orthodontic Appliances

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7050
Author(s):  
Justyna Topolska ◽  
Sylwia Motyl ◽  
Aleksandra Orłowska ◽  
Andrzej Borkowski ◽  
Paweł Działak ◽  
...  
Keyword(s):  
Treatment Time ◽  
Colour Change ◽  
Black Tea ◽  
Brilliant Blue ◽  
Orthodontic Appliances ◽  
Experimental Conditions ◽  
Orthodontic Materials ◽  
Colour System ◽  
New Generation

Orthodontic appliances discolour over treatment time, and a yellowish plaque builds up on the contact area of the brackets, adhesive and teeth. Brilliant Blue-based plaque-staining agents (BBPSAs), which increase tooth brushing efficiency, have the potential to support the maintenance of proper oral hygiene during orthodontic treatment. However, they exhibit strong colouring properties, and their impact on the aesthetics of braces remains unclear. Therefore, the aim of this study was to investigate the influence of commercially available BBPSAs on the colour of aesthetic orthodontic materials. A light-cured, colour-changing orthodontic adhesive and new-generation, monocrystalline, sapphire brackets were chosen for the experiments. The effect of the staining agent on the tested materials was investigated in terms of the reaction temperature and time, as well as the presence of black tea-induced impurities on the materials. The CIELAB (Commission Internationale de L’éclairage L* a* b*) colour system parameters were measured, and the colour differences (ΔE*ab and ΔE00—the Commission Internationale de L’éclairage 2000 colour-difference) were determined for the materials under several experimental conditions. The braces’ green-red colour expression was positively affected by the BBPSA. Under in vitro conditions, the regular use of the BBPSA for 90 days visibly improved the unfavourable colour change caused by the black tea.

scholarly journals Functional Coatings for Orthodontic Archwires—A Review

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3257 ◽  
Author(s):  
Justyna Bącela ◽  
Magdalena Beata Łabowska ◽  
Jerzy Detyna ◽  
Anna Zięty ◽  
Izabela Michalak
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Surface Topography ◽  
Treatment Time ◽  
Orthodontic Appliances ◽  
Functional Coatings ◽  
Nickel Ions ◽  
Orthodontic Archwires

In this literature review, the current state-of-art of coatings for orthodontic archwires’ increasing antimicrobial and relevant mechanical properties, such as surface topography, friction or corrosion resistance, has been presented. There is a growing request for orthodontic appliances, therefore, most researchers focus on innovative functional coatings to cover orthodontic archwires and brackets. Orthodontic appliances are exposed to the unfavorable oral cavity environment, consisting of saliva flow, food, temperature and appliance force. As a consequence, friction or biocorrosion processes may occur. This can affect the functionality of the orthodontic elements, causing changes in their microstructure, surface topography and mechanical properties. Furthermore, the material which the orthodontic archwire is made from is of particular importance in terms of the possible corrosion resistance. This is especially important for patients who are hypersensitive to metals, for example, nickel, which causes allergic reactions. In the literature, there are some studies, carried out in vitro and in vivo, mostly examining the antibacterial, antiadherent, mechanical and roughness properties of functional coatings. They are clinically acceptable but still some properties have to be studied and be developed for better results. In this paper the influence of additives such as nanoparticles of silver and nitrogen-doped TiO2 applied on orthodontic brackets by different methods on the antimicrobial properties was analyzed. Future improvement of coating techniques as well as modification of the archwire composition can reduce the release of nickel ions and eliminate friction and bacterial adhesion problems, thus accelerating treatment time.

Observations of Frozen-Hydrated Microtubules

1990 ◽  
Vol 48 (1) ◽  
pp. 504-505
Author(s):  
D. Chrétien ◽  
D. Job ◽  
R.H. Wade
Keyword(s):  
Fourier Transforms ◽  
Structural Complexity ◽  
Image Contrast ◽  
Phase Behaviour ◽  
Experimental Conditions ◽  
Thin Sections ◽  
Surface Lattice ◽  
Cilia And Flagella ◽  
Outstanding Question

Microtubules are filamentary structures found in the cytoplasm of eukaryotic cells, where, together with actin and intermediate filaments, they form the components of the cytoskeleton. They have many functions and show various levels of structural complexity as witnessed by the singlet, doublet and triplet structures involved in the architecture of centrioles, basal bodies, cilia and flagella. The accepted microtubule model consists of a 25 nm diameter hollow tube with a wall made up of 13 paraxial protofilaments (pf). Each pf is a string of aligned tubulin dimers. Some results have suggested that the pfs follow a superhelix. To understand how microtubules function in the cell an accurate model of the surface lattice is one of the requirements. For example the 9x2 architecture of the axoneme will depend on the organisation of its component microtubules. We should also note that microtubules with different numbers of pfs have been observed in thin sections of cellular and of in-vitro material. An outstanding question is how does the surface lattice adjust to these different pf numbers?We have been using cryo-electron microscopy of frozen-hydrated samples to study in-vitro assembled microtubules. The experimental conditions are described in detail in this reference. The results obtained in conjunction with thin sections of similar specimens and with axoneme outer doublet fragments have already allowed us to characterise the image contrast of 13, 14 and 15 pf microtubules on the basis of the measured image widths, of the the image contrast symmetry and of the amplitude and phase behaviour along the equator in the computed Fourier transforms. The contrast variations along individual microtubule images can be interpreted in terms of the geometry of the microtubule surface lattice. We can extend these results and make some reasonable predictions about the probable surface lattices in the case of other pf numbers, see Table 1. Figure 1 shows observed images with which these predictions can be compared.

Superoxide, Xanthine Oxidase and Platelet Reactions: Further Studies on Mechanisms by which Oxidants Influence Platelets

1981 ◽  
Vol 45 (03) ◽  
pp. 290-293 ◽  
Author(s):  
Peter H Levine ◽  
Danielle G Sladdin ◽  
Norman I Krinsky
Keyword(s):  
Superoxide Dismutase ◽  
Cytochrome C ◽  
Xanthine Oxidase ◽  
Direct Effect ◽  
Platelet Function ◽  
Experimental Conditions ◽  
Release Reaction

SummaryIn the course of studying the effects on platelets of the oxidant species superoxide (O- 2), Of was generated by the interaction of xanthine oxidase plus xanthine. Surprisingly, gel-filtered platelets, when exposed to xanthine oxidase in the absence of xanthine substrate, were found to generate superoxide (O- 2), as determined by the reduction of added cytochrome c and by the inhibition of this reduction in the presence of superoxide dismutase.In addition to generating Of, the xanthine oxidase-treated platelets display both aggregation and evidence of the release reaction. This xanthine oxidase induced aggreagtion is not inhibited by the addition of either superoxide dismutase or cytochrome c, suggesting that it is due to either a further metabolite of O- 2, or that O- 2 itself exerts no important direct effect on platelet function under these experimental conditions. The ability of Of to modulate platelet reactions in vivo or in vitro remains in doubt, and xanthine oxidase is an unsuitable source of O- 2 in platelet studies because of its own effects on platelets.

Perturbation of Platelet Adhesion to Endothelial Cells by Plasminogen Activation In Vitro

1997 ◽  
Vol 78 (02) ◽  
pp. 934-938 ◽  
Author(s):  
Hsiun-ing Chen ◽  
Yueh-I Wu ◽  
Yu-Lun Hsieh ◽  
Guey-Yueh Shi ◽  
Meei-Jyh Jiang ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Endothelial Cells ◽  
Platelet Adhesion ◽  
Treatment Time ◽  
Shape Change ◽  
Umbilical Vein ◽  
Tissue Type ◽  
Apical Surface ◽  
Plasminogen Activation

SummaryTo investigate whether the endothelium-platelet interactions may be altered by plasminogen activation, cultured human umbilical vein endothelial cells (ECs) were treated with tissue-type plasminogen activator (t-PA) in the presence of plasminogen, and platelet adhesion to ECs was subsequently measured by using a tapered flow chamber. Our results demonstrated that platelets adhered more readily to t-PA treated EC monolayer than to the control monolayer at all shear stress levels tested. This phenomenon was treatment time-dependent and dose-dependent, and it could be blocked by adding plasmin inhibitors, such as e-amino caproic acid and aprotinin. Adherent platelets on t-PA treated EC monolayer underwent more severe shape change than those on the control monolayer. While the extracellular matrix directly treated with t-PA attracted less platelets than the control matrix did, platelet adhesion to the matrix that was produced by t-PA-treated ECs was unaltered. These data suggest that t-PA treatment on ECs compromised antiplatelet-adhesion capability on their apical surface without altering the reactivity of their extracellular matrix towards platelets.

Desmopressin (DDAVP) Enhances Platelet Adhesion to the Extracellular Matrix of Cultured Human Endothelial Cells through Increased Expression of Tissue Factor

1997 ◽  
Vol 77 (05) ◽  
pp. 0975-0980 ◽  
Author(s):  
Angel Gálvez ◽  
Goretti Gómez-Ortiz ◽  
Maribel Díaz-Ricart ◽  
Ginés Escolar ◽  
Rogelio González-Sarmiento ◽  
...  
Keyword(s):  
Extracellular Matrix ◽  
Endothelial Cells ◽  
Tissue Factor ◽  
Platelet Adhesion ◽  
Umbilical Vein ◽  
Procoagulant Activity ◽  
Experimental Conditions ◽  
Chromogenic Assay

SummaryThe effect of desmopressin (DDAVP) on thrombogenicity, expression of tissue factor and procoagulant activity (PCA) of extracellular matrix (ECM) generated by human umbilical vein endothelial cells cultures (HUVEC), was studied under different experimental conditions. HUVEC were incubated with DDAVP (1, 5 and 30 ng/ml) and then detached from their ECM. The reactivity towards platelets of this ECM was tested in a perfusion system. Coverslips covered with DD A VP-treated ECMs were inserted in a parallel-plate chamber and exposed to normal blood anticoagulated with low molecular weight heparin (Fragmin®, 20 U/ml). Perfusions were run for 5 min at a shear rate of 800 s1. Deposition of platelets on ECMs was significantly increased with respect to control ECMs when DDAVP was used at 5 and 30 ng/ml (p <0.05 and p <0.01 respectively). The increase in platelet deposition was prevented by incubation of ECMs with an antibody against human tissue factor prior to perfusion. Immunofluorescence studies positively detected tissue factor antigen on DDAVP derived ECMs. A chromogenic assay performed under standardized conditions revealed a statistically significant increase in the procoagulant activity of the ECMs produced by ECs incubated with 30 ng/ml DDAVP (p <0.01 vs. control samples). Northern blot analysis revealed increased levels of tissue factor mRNA in extracts from ECs exposed to DDAVP. Our data indicate that DDAVP in vitro enhances platelet adhesion to the ECMs through increased expression of tissue factor. A similar increase in the expression of tissue factor might contribute to the in vivo hemostatic effect of DDAVP.

Applicability of Instability Index for In vitro Protein Stability Prediction

2019 ◽  
Vol 26 (5) ◽  
pp. 339-347 ◽  
Author(s):  
Dilani G. Gamage ◽  
Ajith Gunaratne ◽  
Gopal R. Periyannan ◽  
Timothy G. Russell
Keyword(s):  
Protein Stability ◽  
Caulobacter Crescentus ◽  
Effect Of Temperature ◽  
Instability Index ◽  
Dipeptide Composition ◽  
Experimental Conditions ◽  
The Stability ◽  
Vitro Protein

Background: The dipeptide composition-based Instability Index (II) is one of the protein primary structure-dependent methods available for in vivo protein stability predictions. As per this method, proteins with II value below 40 are stable proteins. Intracellular protein stability principles guided the original development of the II method. However, the use of the II method for in vitro protein stability predictions raises questions about the validity of applying the II method under experimental conditions that are different from the in vivo setting. Objective: The aim of this study is to experimentally test the validity of the use of II as an in vitro protein stability predictor. Methods: A representative protein CCM (CCM - Caulobacter crescentus metalloprotein) that rapidly degrades under in vitro conditions was used to probe the dipeptide sequence-dependent degradation properties of CCM by generating CCM mutants to represent stable and unstable II values. A comparative degradation analysis was carried out under in vitro conditions using wildtype CCM, CCM mutants and two other candidate proteins: metallo-β-lactamase L1 and α -S1- casein representing stable, borderline stable/unstable, and unstable proteins as per the II predictions. The effect of temperature and a protein stabilizing agent on CCM degradation was also tested. Results: Data support the dipeptide composition-dependent protein stability/instability in wt-CCM and mutants as predicted by the II method under in vitro conditions. However, the II failed to accurately represent the stability of other tested proteins. Data indicate the influence of protein environmental factors on the autoproteolysis of proteins. Conclusion: Broader application of the II method for the prediction of protein stability under in vitro conditions is questionable as the stability of the protein may be dependent not only on the intrinsic nature of the protein but also on the conditions of the protein milieu.

Flavonoids as P-gp Inhibitors: A Systematic Review of SARs

2019 ◽  
Vol 26 (25) ◽  
pp. 4799-4831 ◽  
Author(s):  
Jiahua Cui ◽  
Xiaoyang Liu ◽  
Larry M.C. Chow
Keyword(s):  
Molecular Mechanisms ◽  
Metastatic Cancer ◽  
Drug Candidates ◽  
Chemical Structures ◽  
Transporter Family ◽  
Promising Area ◽  
New Generation ◽  
Nontoxic Inhibitors

P-glycoprotein, also known as ABCB1 in the ABC transporter family, confers the simultaneous resistance of metastatic cancer cells towards various anticancer drugs with different targets and diverse chemical structures. The exploration of safe and specific inhibitors of this pump has always been the pursuit of scientists for the past four decades. Naturally occurring flavonoids as benzopyrone derivatives were recognized as a class of nontoxic inhibitors of P-gp. The recent advent of synthetic flavonoid dimer FD18, as a potent P-gp modulator in reversing multidrug resistance both in vitro and in vivo, specifically targeted the pseudodimeric structure of the drug transporter and represented a new generation of inhibitors with high transporter binding affinity and low toxicity. This review concerned the recent updates on the structure-activity relationships of flavonoids as P-gp inhibitors, the molecular mechanisms of their action and their ability to overcome P-gp-mediated MDR in preclinical studies. It had crucial implications on the discovery of new drug candidates that modulated the efflux of ABC transporters and also provided some clues for the future development in this promising area.

scholarly journals Accuracy Evaluation of Additively and Subtractively Fabricated Palatal Plate Orthodontic Appliances for Newborns and Infants–An In Vitro Study

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4103
Author(s):  
Maite Aretxabaleta ◽  
Alexey Unkovskiy ◽  
Bernd Koos ◽  
Sebastian Spintzyk ◽  
Alexander B. Xepapadeas
Keyword(s):  
Layer Thickness ◽  
In Vitro Study ◽  
Orthodontic Appliances ◽  
Accuracy Evaluation ◽  
Palatal Plate ◽  
Cad Cam ◽  
Subtractive Manufacturing ◽  
Palatal Stimulation ◽  
Manufacturing Time

Different approaches for digital workflows have already been presented for their use in palatal plates for newborns and infants. However, there is no evidence on the accuracy of CAD/CAM manufactured orthodontic appliances for this kind of application. This study evaluates trueness and precision provided by different CAM technologies and materials for these appliances. Samples of a standard palatal stimulation plate were manufactured using stereolithography (SLA), direct light processing (DLP) and subtractive manufacturing (SM). The effect of material (for SM) and layer thickness (for DLP) were also investigated. Specimens were digitized with a laboratory scanner (D2000, 3Shape) and analyzed with a 3D inspection software (Geomagic Control X, 3D systems). For quantitative analysis, differences between 3D datasets were measured using root mean square (RMS) error values for trueness and precision. For qualitative analysis, color maps were generated to detect locations of deviations within each sample. SM showed higher trueness and precision than AM technologies. Reducing layer thickness in DLP did not significantly increase accuracy, but prolonged manufacturing time. All materials and technologies met the clinically acceptable range and are appropriate for their use. DLP with 100 µm layer thickness showed the highest efficiency, obtaining high trueness and precision within the lowest manufacturing time.

scholarly journals Non-invasive skin sampling of tryptophan/kynurenine ratio in vitro towards a skin cancer biomarker

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Skaidre Jankovskaja ◽  
Johan Engblom ◽  
Melinda Rezeli ◽  
György Marko-Varga ◽  
Tautgirdas Ruzgas ◽  
...  
Keyword(s):  
Skin Cancer ◽  
Relative Increase ◽  
Cancer Biomarker ◽  
Cancer Diagnostics ◽  
Sampling Time ◽  
Skin Permeability ◽  
Experimental Conditions ◽  
Non Invasive

AbstractThe tryptophan to kynurenine ratio (Trp/Kyn) has been proposed as a cancer biomarker. Non-invasive topical sampling of Trp/Kyn can therefore serve as a promising concept for skin cancer diagnostics. By performing in vitro pig skin permeability studies, we conclude that non-invasive topical sampling of Trp and Kyn is feasible. We explore the influence of different experimental conditions, which are relevant for the clinical in vivo setting, such as pH variations, sampling time, and microbial degradation of Trp and Kyn. The permeabilities of Trp and Kyn are overall similar. However, the permeated Trp/Kyn ratio is generally higher than unity due to endogenous Trp, which should be taken into account to obtain a non-biased Trp/Kyn ratio accurately reflecting systemic concentrations. Additionally, prolonged sampling time is associated with bacterial Trp and Kyn degradation and should be considered in a clinical setting. Finally, the experimental results are supported by the four permeation pathways model, predicting that the hydrophilic Trp and Kyn molecules mainly permeate through lipid defects (i.e., the porous pathway). However, the hydrophobic indole ring of Trp is suggested to result in a small but noticeable relative increase of Trp diffusion via pathways across the SC lipid lamellae, while the shunt pathway is proposed to slightly favor permeation of Kyn relative to Trp.

The Safety and Antimicrobial Properties of Stabilized Hypochlorous Acid in Acetic Acid Buffer for the Treatment of Acute Wounds—a Human Pilot Study and In Vitro Data

2021 ◽  
pp. 153473462110156
Author(s):  
Ewa A. Burian ◽  
Lubna Sabah ◽  
Klaus Kirketerp-Møller ◽  
Elin Ibstedt ◽  
Magnus M. Fazli ◽  
...  
Keyword(s):  
Pilot Study ◽  
Hypochlorous Acid ◽  
Treatment Time ◽  
Donor Site ◽  
Antimicrobial Properties ◽  
Prolonged Treatment ◽  
Wound Irrigation ◽  
The Mean ◽  
And Performance

Acute wounds may require cleansing to reduce the risk of infection. Stabilized hypochlorous acid in acetic buffer (HOCl + buffer) is a novel wound irrigation solution with antimicrobial properties. We performed a first-in-man, prospective, open-label pilot study to document preliminary safety and performance in the treatment of acute wounds. The study enrolled 12 subjects scheduled for a split-skin graft transplantation, where the donor site was used as a model of an acute wound. The treatment time was 75 s, given on 6 occasions. A total of 7 adverse events were regarded as related to the treatment; all registered as pain during the procedure for 2 subjects. One subject had a wound infection at the donor site. The mean colony-forming unit (CFU) decreased by 41% after the treatment, and the mean epithelialization was 96% on both days 14 (standard deviation [SD] 8%) and 21 (SD 10%). The study provides preliminary support for the safety, well-tolerance, and efficacy of HOCl + buffer for acute wounds. The pain was frequent although resolved quickly. Excellent wound healing and satisfying antimicrobial properties were observed. A subsequent in vitro biofilm study also indicated good antimicrobial activity against Pseudomonas aeruginosa with a 96% mean reduction of CFU, when used for a treatment duration of 15 min ( P < .0001), and a 50% decrease for Staphylococcus aureus ( P = .1010). Future larger studies are needed to evaluate the safety and performance of HOCl + buffer in acute wounds, including the promising antimicrobial effect by prolonged treatment on bacterial biofilms.

Sign in / Sign up

Export Citation Format

Share Document