scholarly journals A Design Method for a Variable Combined Brake System for Motorcycles Applying the Adaptive Control Method

Machines ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 31
Author(s):  
Yuan-Ting Lin ◽  
Chyuan-Yow Tseng ◽  
Jao-Hwa Kuang ◽  
Yeong-Maw Hwang
Keyword(s):  
Adaptive Control ◽  
Control Method ◽  
Design Method ◽  
Brake System ◽  
Test Results ◽  
Braking Performance ◽  
Straight Line ◽  
Parameter Matching ◽  
Maximum Deceleration ◽  
Wide Variation Range

The variable combined brake system (VCBS) is a mechanism for motorcycles to simultaneously activate the front and rear brake systems by using one brake lever or pedal. The purpose is to reduce the risk of rollover accidents due to misuse of the front brake when panic braking. Due to its ability in a wide variation range of braking force distribution (BFD) ratios between the front and rear wheels, the VCBS can simultaneously achieve high braking effort and driving comfort performances, provided that the BFD ratio is designed appropriately. This paper aimed to develop the design method for the VCBS. A mathematical model of the VCBS mechanism is derived, and a parameter matching design method that applies adaptive control theory is proposed. A prototype of VCBS is designed and built based on the proposed method. The straight-line braking test results show that the motorcycle equipped with the VCBS prototype effectively obtained a high braking performance in deceleration. The obtained maximum deceleration is an average of 6.37 m/s2 (0.65 g) under an average handbrake lever force of 154.29 N. For front brake failure, maximum deceleration is obtained at an average of 3.38 m/s2 (0.34 g), which is higher than the homologation requirement of 2.9 m/s2.

Design of combined brake system for light weight scooters

2021 ◽  
pp. 095440702110240
Author(s):  
Yuan-Ting Lin ◽  
Chyuan-Yow Tseng ◽  
Jao-Hwa Kuang ◽  
Yeong-Maw Hwang
Keyword(s):  
Ride Comfort ◽  
Brake System ◽  
Force Distribution ◽  
Test Results ◽  
Systematic Method ◽  
Braking Performance ◽  
Evaluation Indexes ◽  
Low Costs ◽  
Braking Force ◽  
Good Agreement

The combined brake system (CBS) is a mechanism that links the front and rear brakes for scooters. For two-wheeled scooters, a CBS with appropriate braking force distribution can reduce the risk of crashing accidents due to insufficient driving proficiency. The design of the braking force distribution for a CBS is challenging to the designer because it has to fulfill many requirements such as braking performance, ride comfort, reliability, and low costs. This paper proposes a systematic method to optimize the parameters of CBS. The evaluation indexes for the design are first discussed. The steps to determine the critical parameter to meet the indexes and a method to predict braking performance are developed. Finally, driving tests are carried out to verify the effectiveness of the proposed method. Experimental results showed that the deceleration of the tested scooter equipped with the designed CBS achieves an average mean fully developed deceleration (MFDD) of 5.246 m/s2, higher than the homologation requirement. Furthermore, the proposed method’s prediction of braking performance is in good agreement with the test results, with errors <1%.

scholarly journals Design of a pressure modulator using fast-acting bistable valves

2020 ◽  
pp. 095440622094420
Author(s):  
L Henderson ◽  
D Cebon
Keyword(s):  
Design Method ◽  
Detection Algorithm ◽  
Chamber Pressure ◽  
Low Friction ◽  
Vehicle Performance ◽  
Braking Performance ◽  
Straight Line ◽  
Pneumatic Valves ◽  
Pressure Observer ◽  
Fast Acting

Fast-acting pneumatic valves, combined with a slip-control braking algorithm, have recently been used to improve the straight-line braking performance of an experimental heavy goods vehicle, on low friction roads, by 16%. This paper describes how the fast-acting valves, which were central to the aforementioned research, were designed for use on a commercial vehicle. Design equations, as well as a generalized design method, are first presented for the fast-acting bistable pneumatic valve. A pressure observer is developed to predict the brake chamber pressure in cases where a pressure transducer is mounted upstream. A simple fault detection algorithm is then introduced, which utilizes some of the calculations made in the pressure observer, and is shown to correctly identify faults on a real vehicle. Performance comparisons are made between the new modulator and a conventional heavy goods vehicle electro-pneumatic brake system. Closed-loop frequency response tests show that the control bandwidth of brake chamber pressure on a heavy goods vehicle can be increased from 1.5 Hz to 10 Hz using the new hardware.

Conjoint Simulation of Active Suspension and ABS

2014 ◽  
Vol 494-495 ◽  
pp. 155-158
Author(s):  
Lei Zhang ◽  
En Guo Dong ◽  
Jie Xun Lou
Keyword(s):  
Simulation Model ◽  
Control Method ◽  
Active Suspension ◽  
Suspension System ◽  
Brake System ◽  
Active Force ◽  
Simulation Data ◽  
Integral Control ◽  
Braking Performance ◽  
Braking Distance

A conjoint simulation of suspension system and brake system is proposed based on vehicle braking performance and ride stability. A half car simulation model is built applying the software of MATLAB in which the dynamic load is used to control the active force for suspension system and adjust parameter value of ABS (Anti-lock brake system). The suspension system and ABS construction of the half car simulation model is illustrated in detail. Using the simulation model, the braking distance, the stroke for suspension and the pitch angle of body are measured in three status which include the individually control for active suspension, the individually control for ABS and the integration control respectively. The simulation data show that the integral control method synchronously ensures braking stability and riding stability.

scholarly journals Car braking effectiveness after adaptation for drivers with motor dysfunctions

2021 ◽  
Vol 11 (1) ◽  
pp. 617-623
Author(s):  
Adam Sowiński ◽  
Tomasz Szczepański ◽  
Grzegorz Koralewski
Keyword(s):  
Efficiency Index ◽  
Mathematical Function ◽  
Test Results ◽  
Braking Performance ◽  
Braking System ◽  
System Adaptation ◽  
Parametric Description ◽  
Limited Power ◽  
Braking Force ◽  
Selection Of

Abstract This article presents the results of measurements of the braking efficiency of vehicles adapted to be operated by drivers with motor dysfunctions. In such cars, the braking system is extended with an adaptive device that allows braking with the upper limb. This device applies pressure to the original brake in the car. The braking force and thus its efficiency depend on the mechanical ratio in the adapting device. In addition, braking performance depends on the sensitivity of the car’s original braking system and the maximum force that a disabled person can exert on the handbrake lever. Such a person may have limited power in the upper limbs. The force exerted by the driver can also be influenced by the position of the driver’s seat in relation to the handbrake lever. This article describes the research aimed at understanding the influence of the above-mentioned factors on the car braking performance. As a part of the analysis of the test results, a mathematical function was proposed that allows a parametric description of the braking efficiency index on the basis of data on the braking system, adaptation device, driver’s motor limitations, and the position of the driver’s seat. The information presented in this article can be used for the preliminary selection of adaptive devices to the needs of a given driver with a disability and to the vehicle construction.

scholarly journals Disturbance compensation-based output feedback adaptive control for shape memory alloy actuator system

2021 ◽  
Vol 18 (1) ◽  
pp. 172988142199399
Author(s):  
Xiaoguang Li ◽  
Bi Zhang ◽  
Daohui Zhang ◽  
Xingang Zhao ◽  
Jianda Han
Keyword(s):  
Adaptive Control ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Control Method ◽  
Control Law ◽  
Reference Trajectory ◽  
Disturbance Compensation ◽  
Comparison Results ◽  
Control Scheme ◽  
Actuator System

Shape memory alloy (SMA) has been utilized as the material of smart actuators due to the miniaturization and lightweight. However, the nonlinearity and hysteresis of SMA material seriously affect the precise control. In this article, a novel disturbance compensation-based adaptive control scheme is developed to improve the control performance of SMA actuator system. Firstly, the nominal model is constructed based on the physical process. Next, an estimator is developed to online update not only the unmeasured system states but also the total disturbance. Then, the novel adaptive controller, which is composed of the nominal control law and the compensation control law, is designed. Finally, the proposed scheme is evaluated in the SMA experimental setup. The comparison results have demonstrated that the proposed control method can track reference trajectory accurately, reject load variations and stochastic disturbances timely, and exhibit satisfactory robust stability. The proposed control scheme is system independent and has some potential in other types of SMA-actuated systems.

scholarly journals Motor shifting and torque distribution control of a multi-motor driving system in electric construction vehicles

2021 ◽  
Vol 13 (6) ◽  
pp. 168781402110284
Author(s):  
Weikang Kong ◽  
Jixin Wang ◽  
Dewen Kong ◽  
Yuanying Cong ◽  
Shuangshi Feng
Keyword(s):  
Power Systems ◽  
Control Method ◽  
Simulation Analysis ◽  
Rapid Development ◽  
Transmission Efficiency ◽  
Torque Distribution ◽  
Driving System ◽  
Construction Machinery ◽  
Improve Energy Efficiency ◽  
Parameter Matching

With the rapid development of the world economic construction and the shortage of energy, it has become a hot research issue to realize the electrification of the vehicle driving system and improve energy efficiency. Most of the electric construction machinery power systems are characterized by low speed and high load. The coordinated driving of multiple motors can increase the output torque and improve the transmission efficiency of the machine on the basis of a compact layout. A novel configuration of electric construction vehicles based on multi-motor and single-speed and its driving torque distribution control method is presented in this paper. The detailed mathematical model is established and the simulation analysis is carried out based on it. The results show that the proposed multi-motor driving system with the control strategy can improve the overall efficiency in the condition of ensuring the driving force when the parameter matching and motors choosing reasonably.

scholarly journals A Novel Adaptive Control Approach Based on Available Headroom of the VSC-HVDC for Enhancement of the AC Voltage Stability

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3222
Author(s):  
Duc Nguyen Huu
Keyword(s):  
Adaptive Control ◽  
Voltage Stability ◽  
Reactive Power ◽  
Control Method ◽  
Offshore Wind ◽  
Voltage Source ◽  
Long Distance ◽  
Control Approach ◽  
Hvdc System ◽  
Voltage Support

Increasing offshore wind farms are rapidly installed and planned. However, this will pose a bottle neck challenge for long-distance transmission as well as inherent variation of their generating power outputs to the existing AC grid. VSC-HVDC links could be an effective and flexible method for this issue. With the growing use of voltage source converter high-voltage direct current (VSC-HVDC) technology, the hybrid VSC-HVDC and AC system will be a next-generation transmission network. This paper analyzes the contribution of the multi VSC-HVDC system on the AC voltage stability of the hybrid system. A key contribution of this research is proposing a novel adaptive control approach of the VSC-HVDC as a so-called dynamic reactive power booster to enhance the voltage stability of the AC system. The core idea is that the novel control system is automatically providing a reactive current based on dynamic frequency of the AC system to maximal AC voltage support. Based on the analysis, an adaptive control method applied to the multi VSC-HVDC system is proposed to realize maximum capacity of VSC for reactive power according to the change of the system frequency during severe faults of the AC grid. A representative hybrid AC-DC network based on Germany is developed. Detailed modeling of the hybrid AC-DC network and its proposed control is derived in PSCAD software. PSCAD simulation results and analysis verify the effective performance of this novel adaptive control of VSC-HVDC for voltage support. Thanks to this control scheme, the hybrid AC-DC network can avoid circumstances that lead to voltage instability.

Anti-noise model-free adaptive control and its application in the circulating fluidized bed boiler

2020 ◽  
pp. 095965182097937
Author(s):  
Na Dong ◽  
Wenjin Lv ◽  
Shuo Zhu ◽  
Donghui Li
Keyword(s):  
Adaptive Control ◽  
Complete Convergence ◽  
Circulating Fluidized Bed ◽  
Control Method ◽  
Noise Model ◽  
Good Resistance ◽  
Industrial Systems ◽  
Noise Interference ◽  
Model Free ◽  
Tracking Differentiator

Model-free adaptive control has been developed greatly since it was proposed. Up to now, model-free adaptive control theory has become mature and tends to be an effective solution for complex unmodeled industrial systems. In practical industrial processes, most control systems are inevitably accompanied by noise that will result in indelible error and may further cause inaccurate feedback to the output. In order to solve this kind of problem with model-free technique, this article incorporates an improved tracking differentiator into model-free adaptive control. After that, the anti-noise model-free adaptive control method with complete convergence analysis is proposed. Meanwhile, numerical simulation proves that the improved control method can quickly track a given signal with good resistance to noise interference. Finally, the effectiveness and practicability of the proposed algorithm are verified by experiments through the control of drum water level of circulating fluidized.

Sign in / Sign up

Export Citation Format

Share Document