scholarly journals Sulfation Roasting of Nickel Oxide–Sulfide Mixed Ore Concentrate in the Presence of Ammonium Sulfate: Experimental and DFT Studies

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1256 ◽  
Author(s):  
Guangshi Li ◽  
Xiaolu Xiong ◽  
Liping Wang ◽  
Lang Che ◽  
Lizhen Wei ◽  
...  
Keyword(s):  
Nickel Oxide ◽  
Ammonium Sulfate ◽  
Density Functional ◽  
Dft Method ◽  
Ferric Sulfate ◽  
Activation Technique ◽  
Low Grade ◽  
Metal Sulfate ◽  
Sulfation Roasting ◽  
Sulfate Activation

Sulfation roasting, a common activation technique, is a potential method for cleaner production of nickel from complex low-grade ores. In this study, nickel oxide–sulfide mixed ore concentrate was roasted with the addition of ammonium sulfate under a static air atmosphere, and the roasted products were leached by water, in order to evaluate the extraction of metals. The ammonium sulfate activation roasting was investigated thoroughly and systematically by thermogravimetry–differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy. Particularly, the interface sulfation behavior and path were studied by the density functional theory (DFT) method. The results showed that a large amount of nonferrous metal sulfate (70% Ni, 89% Co, and 90% Cu) was generated, while iron was almost entirely transformed into iron oxide under appropriate roasting conditions of adding ammonium sulfate at a mass ratio of 200%, heating to 650 °C at 10 °C/min, and holding for 120 min. It was found that activation of ammonium sulfate can take two different paths: one in which ammonium sulfate directly reacts with raw ores below 500 °C and the other in which the SO2 decomposed from sulfates (ammonium sulfate, intermediate ammonium ferric sulfate, and ferric sulfate) reacts with the intermediate metal sulfides (NiS and Cu2S). The interface sulfation mechanism of NiS and Cu2S was investigated deeply by DFT method, which showed that there are two paths of sulfation for NiS or Cu2S, and both of them are thermodynamically favored. Thus, a thorough and systematic investigation of ammonium sulfate activation roasting of nickel oxide–sulfide mixed ore is provided; this might be a potential basis for future industrial applications of ammonium sulfate activation roasting techniques in complex mineral metallurgy.

uMBD: A Materials-Ready Dispersion Correction that Uniformly Treats Metallic, Ionic, Covalent, and van der Waals Bonding

2019 ◽  
Author(s):  
Minho Kim ◽  
won june kim ◽  
Tim Gould ◽  
Eok Kyun Lee ◽  
Sébastien Lebègue ◽  
...  
Keyword(s):  
First Principles ◽  
Density Functional ◽  
Electrode Materials ◽  
Full Range ◽  
Van Der Waals ◽  
Dft Method ◽  
Dispersion Correction ◽  
Computational Overhead ◽  
System A ◽  
Battery Design

<p>Materials design increasingly relies on first-principles calculations for screening important candidates and for understanding quantum mechanisms. Density functional theory (DFT) is by far the most popular first-principles approach due to its efficiency and accuracy. However, to accurately predict structures and thermodynamics, DFT must be paired with a van der Waals (vdW) dispersion correction. Therefore, such corrections have been the subject of intense scrutiny in recent years. Despite significant successes in organic molecules, no existing model can adequately cover the full range of common materials, from metals to ionic solids, hampering the applications of DFT for modern problems such as battery design. Here, we introduce a universally optimized vdW-corrected DFT method that demonstrates an unbiased reliability for predicting molecular, layered, ionic, metallic, and hybrid materials without incurring a large computational overhead. We use our method to accurately predict the intercalation potentials of layered electrode materials of a Li-ion battery system – a problem for which the existing state-of-the-art methods fail. Thus, we envisage broad use of our method in the design of chemo-physical processes of new materials.</p>

scholarly journals First Attempts of the Use of 195Pt NMR of Phenylbenzothiazole Complexes as Spectroscopic Technique for the Cancer Diagnosis

Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 3970 ◽  
Author(s):  
Bruna T. L. Pereira ◽  
Mateus A. Gonçalves ◽  
Daiana T. Mancini ◽  
Kamil Kuca ◽  
Teodorico C. Ramalho
Keyword(s):  
Cancer Treatment ◽  
Cancer Diagnosis ◽  
Density Functional ◽  
Chemical Shifts ◽  
Chloride Ion ◽  
Platinum Complexes ◽  
Dft Method ◽  
Ion Concentration ◽  
Implicit Solvent ◽  
Early Cancer Diagnosis

Platinum complexes have been studied for cancer treatment for several decades. Furthermore, another important platinum characteristic is related to its chemical shifts, in which some studies have shown that the 195Pt chemical shifts are very sensitive to the environment, coordination sphere, and oxidation state. Based on this relevant feature, Pt complexes can be proposed as potential probes for NMR spectroscopy, as the chemical shifts values will be different in different tissues (healthy and damaged) Therefore, in this paper, the main goal was to investigate the behavior of Pt chemical shifts in the different environments. Calculations were carried out in vacuum, implicit solvent, and inside the active site of P13K enzyme, which is related with breast cancer, using the density functional theory (DFT) method. Moreover, the investigation of platinum complexes with a selective moiety can contribute to early cancer diagnosis. Accordingly, the Pt complexes selected for this study presented a selective moiety, the 2-(4′aminophenyl)benzothiazole derivative. More specifically, two Pt complexes were used herein: One containing chlorine ligands and one containing water in place of chlorine. Some studies have shown that platinum complexes coordinated to chlorine atoms may suffer hydrolyses inside the cell due to the low chloride ion concentration. Thus, the same calculations were performed for both complexes. The results showed that both complexes presented different chemical shift values in the different proposed environments. Therefore, this paper shows that platinum complexes can be a potential probe in biological systems, and they should be studied not only for cancer treatment, but also for diagnosis.

Understanding the molecular mechanism of the stereoselective conversion of N-trialkylsilyloxy nitronates into bicyclic isoxazoline derivatives

2021 ◽  
Author(s):  
Agnieszka Kącka-Zych ◽  
Radomir Jasinski
Keyword(s):  
Density Functional Theory ◽  
Molecular Mechanism ◽  
Electron Density ◽  
Density Functional ◽  
Dft Method ◽  
Functional Theory ◽  
Molecular Electron ◽  
Molecular Electron Density Theory

Conversion of N-trialkylsilyloxy nitronates into bicyclic isoxazoline derivatives has been explored using Density Functional Theory (DFT) method within the context of the Molecular Electron Density Theory (MEDT) at the B97XD(PCM)/6-311G(d,p)...

scholarly journals Boron-Decorated Pillared Graphene as the Basic Element for Supercapacitors: An Ab Initio Study

2021 ◽  
Vol 11 (8) ◽  
pp. 3496
Author(s):  
Dmitry A. Kolosov ◽  
Olga E. Glukhova
Keyword(s):  
Density Functional ◽  
Dft Method ◽  
Heat Of Formation ◽  
Basic Element ◽  
Supercapacitor Electrode ◽  
Functional Theory ◽  
Icosahedral Clusters ◽  
New Material ◽  
Principle Density Functional Theory ◽  
Specific Quantum

In this work, using the first-principle density functional theory (DFT) method, we study the properties of a new material based on pillared graphene and the icosahedral clusters of boron B12 as a supercapacitor electrode material. The new composite material demonstrates a high specific quantum capacitance, specific charge density, and a negative value of heat of formation, which indicates its efficiency. It is shown that the density of electronic states increases during the addition of clusters, which predictably leads to an increase in the electrode conductivity. We predict that the use of a composite based on pillared graphene and boron will increase the efficiency of existing supercapacitors.

scholarly journals The Adsorption and Sensing Performances of Ir-modified MoS2 Monolayer toward SF6 Decomposition Products: A DFT Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 100
Author(s):  
Hongcheng Liu ◽  
Feipeng Wang ◽  
Kelin Hu ◽  
Tao Li ◽  
Yuyang Yan ◽  
...  
Keyword(s):  
Gas Sensor ◽  
Density Functional ◽  
Gas Adsorption ◽  
Dft Method ◽  
Orbital Theory ◽  
Gas Sensitivity ◽  
Decomposition Products ◽  
Mos2 Monolayer ◽  
Characteristic Decomposition ◽  
Sensing Material

In this paper, the Ir-modified MoS2 monolayer is suggested as a novel gas sensor alternative for detecting the characteristic decomposition products of SF6, including H2S, SO2, and SOF2. The corresponding adsorption properties and sensing behaviors were systematically studied using the density functional theory (DFT) method. The theoretical calculation indicates that Ir modification can enhance the surface activity and improve the conductivity of the intrinsic MoS2. The physical structure formation, the density of states (DOS), deformation charge density (DCD), molecular orbital theory analysis, and work function (WF) were used to reveal the gas adsorption and sensing mechanism. These analyses demonstrated that the Ir-modified MoS2 monolayer used as sensing material displays high sensitivity to the target gases, especially for H2S gas. The gas sensitivity order and the recovery time of the sensing material to decomposition products were reasonably predicted. This contribution indicates the theoretical possibility of developing Ir-modified MoS2 as a gas sensor to detect characteristic decomposition gases of SF6.

scholarly journals Theoretical Insights into the Electron Capture Behavior of H2SO4···N2O Complex: A DFT and Molecular Dynamics Study

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2349 ◽  
Author(s):  
Wei-Hua Wang ◽  
Wen-Ling Feng ◽  
Wen-Liang Wang ◽  
Ping Li
Keyword(s):  
Molecular Dynamics ◽  
Electron Capture ◽  
Atmospheric Chemistry ◽  
Density Functional ◽  
Molecular Complexes ◽  
Dft Method ◽  
Dynamics Simulation ◽  
Oh Radical ◽  
Before And After ◽  
Reduced Density

Both sulfuric acid (H2SO4) and nitrous oxide (N2O) play a central role in the atmospheric chemistry in regulating the global environment and climate changes. In this study, the interaction behavior between H2SO4 and N2O before and after electron capture has been explored using the density functional theory (DFT) method as well as molecular dynamics simulation. The intermolecular interactions have been characterized by atoms in molecules (AIM), natural bond orbital (NBO), and reduced density gradient (RDG) analyses, respectively. It was found that H2SO4 and N2O can form two transient molecular complexes via intermolecular H-bonds within a certain timescale. However, two molecular complexes can be transformed into OH radical, N2, and HSO4− species upon electron capture, providing an alternative formation source of OH radical in the atmosphere. Expectedly, the present findings not only can provide new insights into the transformation behavior of H2SO4 and N2O, but also can enable us to better understand the potential role of the free electron in driving the proceeding of the relevant reactions in the atmosphere.

First principles analysis of oxygen vacancy formation and migration in Sr2BMoO6 (B = Mg, Co, Ni)

RSC Advances ◽  
2016 ◽  
Vol 6 (38) ◽  
pp. 31968-31975 ◽  
Author(s):  
Shuai Zhao ◽  
Liguo Gao ◽  
Chunfeng Lan ◽  
Shyam S. Pandey ◽  
Shuzi Hayase ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Oxygen Vacancy ◽  
First Principles ◽  
Density Functional ◽  
Dft Method ◽  
Double Perovskites ◽  
Functional Theory ◽  
Oxygen Vacancy Formation ◽  
The Density Functional Theory ◽  
And Migration

In this work, we present a detailed first-principles investigation on the stoichiometric and oxygen-deficient structures of double perovskites, Sr2BMoO6 (B = Mg, Co and Ni), using the density functional theory (DFT) method.

Quantum-Chemical Ab Initio Calculations on Inda- and Thallabenzene (C5H5In and C5H5Tl) and their Structural Isomers η5-C5H5In and η5-C5H5Tl

2018 ◽  
Vol 71 (3) ◽  
pp. 102
Author(s):  
Emma Persoon ◽  
Yuekui Wang ◽  
Gerhard Raabe
Keyword(s):  
Ab Initio ◽  
Quantum Chemical ◽  
Density Functional ◽  
Single Point ◽  
Normal Modes ◽  
Dft Method ◽  
Basis Sets ◽  
Triplet States ◽  
Structural Isomers ◽  
Td Dft

Quantum-chemical ab initio, time-independent, as well as time-dependent density functional theory (TD-DFT) calculations were performed on the so far elusive heterocycles inda- and thallabenzene (C5H5In and C5H5Tl), employing several different methods (MP2, CISD, CCSD, CCSD(T), BD, BD(T), QCISD, QCISD(T), CASSCF, DFT/B3LYP), effective core potentials, and different basis sets. While calculations on the MP2 level predict the ground states of the title compounds to be singlets with the first triplet states between 13 and 15 kcal mol−1 higher in energy, single point calculations with the QCISD(T), CCSD(T), and BD(T) methods at CCSD-optimized structures result in energy differences between the singlet and the triplet states in the range between 0.3 and 2.1 kcal mol−1 in favour of the triplet states. According to a CASSCF(8,8) calculation the triplets are also more stable by about 2.5–2.9 kcal mol−1. Calculations were also performed for the C5v-symmetric η5 structural isomers (cyclopentadienylindium, CpIn, and cyclopentadienylthallium, CpTl, Cp = C5H5) of the title compounds. At the highest level of theory employed in this study, C5H5In is between 79 and 88 kcal mol−1 higher in energy than CpIn, while this energy difference is even larger for thallabenzene where C5H5Tl is energetically between 94 and 102 kcal mol−1 above CpTl. In addition we report on the UV/vis spectra calculated with a TD-DFT method as well as on the spectra of the normal modes of C5H5In and C5H5Tl. Both types of spectra might facilitate identification of the title compounds eventually formed in photolysis or pyrolysis experiments.

scholarly journals Vibrational Study and Force Field of the Citric Acid Dimer Based on the SQM Methodology

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Laura Cecilia Bichara ◽  
Hernán Enrique Lanús ◽  
Evelina Gloria Ferrer ◽  
Mónica Beatriz Gramajo ◽  
Silvia Antonia Brandán
Keyword(s):  
Citric Acid ◽  
Force Field ◽  
Density Functional ◽  
Solid Phase ◽  
Dft Method ◽  
Electronic Charge ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Atoms In Molecules Theory ◽  
Best Fit

We have carried out a structural and vibrational theoretical study for the citric acid dimer. The Density Functional Theory (DFT) method with the B3LYP/6-31G∗ and B3LYP/6-311++ methods have been used to study its structure and vibrational properties. Then, in order to get a good assignment of the IR and Raman spectra in solid phase of dimer, the best fit possible between the calculated and recorded frequencies was carry out and the force fields were scaled using the Scaled Quantum Mechanic Force Field (SQMFF) methodology. An assignment of the observed spectral features is proposed. A band of medium intensity at 1242  together with a group of weak bands, previously not assigned to the monomer, was in this case assigned to the dimer. Furthermore, the analysis of the Natural Bond Orbitals (NBOs) and the topological properties of electronic charge density by employing Bader's Atoms in Molecules theory (AIM) for the dimer were carried out to study the charge transference interactions of the compound.

Sign in / Sign up

Export Citation Format

Share Document