scholarly journals Poly(N-isopropylacrylamide) Hydrogel for Diving/Surfacing Device

Micromachines ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 210
Author(s):  
Jung Gi Choi ◽  
Hocheol Gwac ◽  
Yongwoo Jang ◽  
Christopher Richards ◽  
Holly Warren ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Search And Rescue ◽  
Solution Temperature ◽  
Water Molecules ◽  
Temperature Modulation ◽  
Underwater Robots ◽  
Critical Solution Temperature ◽  
Diving Depth ◽  
Potential Applications ◽  
Good Potential

Underwater robots and vehicles have received great attention due to their potential applications in remote sensing and search and rescue. A challenge for micro aquatic robots is the lack of small motors needed for three-dimensional locomotion in water. Here, we show a simple diving and surfacing device fabricated from thermo-sensitive poly(N-isopropylacrylamide) or a poly(N-isopropylacrylamide)-containing hydrogel. The poly(N-isopropylacrylamide)-containing device exhibited fast and reversible diving/surfacing cycles in response to changing temperature. Modulation of the interaction between poly(N-isopropylacrylamide) chains and water molecules at temperatures above or below the lower critical solution temperature regulates the gel density through the swelling and de-swelling. The gel surfaced in water when heated and sank when cooled. We further showed reversible diving/surfacing cycles of the device when exposed to electrical and ultrasonic stimuli. Finally, a small electrically heated gel was incorporated into a miniature submarine and used to control the diving depth. These results suggest that the poly(N-isopropylacrylamide)-containing device has good potential for underwater remote-controlled micro aquatic robots.

scholarly journals Entropy Rules: Molecular Dynamics Simulations of Model Oligomers for Thermoresponsive Polymers

Entropy ◽  
2020 ◽  
Vol 22 (10) ◽  
pp. 1187
Author(s):  
Alexander Kantardjiev ◽  
Petko M. Ivanov
Keyword(s):  
Entropy Change ◽  
Atomic Scale ◽  
Solution Temperature ◽  
Water Molecules ◽  
Thermoresponsive Polymers ◽  
Simulation Data ◽  
Critical Solution Temperature ◽  
Extended Conformation ◽  
Dynamics Simulations ◽  
Experimental Findings

We attempted to attain atomic-scale insights into the mechanism of the heat-induced phase transition of two thermoresponsive polymers containing amide groups, poly(N-isopropylacrylamide) (PNIPAM) and poly(2-isopropyl-2-oxazoline) (PIPOZ), and we succeeded in reproducing the existence of lower critical solution temperature (LCST). The simulation data are in accord with experimental findings. We found out that the entropy has an important contribution to the thermodynamics of the phase separation transition. Moreover, after decomposing further the entropy change to contributions from the solutes and from the solvent, it appeared out that the entropy of the solvent has the decisive share for the lowering of the free energy of the system when increasing the temperature above the LCST. Our conclusion is that the thermoresponsive behavior is driven by the entropy of the solvent. The water molecules structured around the functional groups of the polymer that are exposed to contact with the solvent in the extended conformation lower the enthalpy of the system, but at certain temperature the extended conformation of the polymer collapses as a result of dominating entropy gain from “released” water molecules. We stress also on the importance of using more than one reference molecule in the simulation box at the setup of the simulation.

An Update on Recent Advances in Cubosome: A Novel Drug Delivery System

2021 ◽  
Vol 21 ◽  
Author(s):  
Madhukar Garg ◽  
Anju Goyal ◽  
Sapna Kumari
Keyword(s):  
Drug Delivery ◽  
Drug Delivery System ◽  
Lipid Bilayers ◽  
Delivery System ◽  
Liquid Crystalline ◽  
Three Dimensional ◽  
Biologically Active ◽  
Potential Applications ◽  
Health Related ◽  
Novel Drug

: Cubosomes are highly stable nanostructured liquid crystalline dosage delivery form derived from amphiphilic lipids and polymer-based stabilizers converting it in a form of effective biocompatible carrier for the drug delivery. The delivery form comprised of bicontinuous lipid bilayers arranged in three dimensional honeycombs like structure provided with two internal aqueous channels for incorporation of number of biologically active ingredients. In contrast liposomes they provide large surface area for incorporation of different types of ingredients. Due to the distinct advantages of biocompatibility and thermodynamic stability, cubosomes have remained the first preference as method of choice in the sustained release, controlled release and targeted release dosage forms as new drug delivery system for the better release of the drugs. As lot of advancement in the new form of dosage form has bring the novel avenues in drug delivery mechanisms so it was matter of worth to compile the latest updates on the various aspects of mentioned therapeutic delivery system including its structure, routes of applications along with the potential applications to encapsulate variety drugs to serve health related benefits.

scholarly journals A Novel Pseudomonas geniculata AGE Family Epimerase/Isomerase and Its Application in d-Mannose Synthesis

Foods ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1809
Author(s):  
Zhanzhi Liu ◽  
Ying Li ◽  
Jing Wu ◽  
Sheng Chen
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Optimal Temperature ◽  
Reaction Conditions ◽  
Enzymatic Production ◽  
Physiological Properties ◽  
Potential Applications ◽  
Kinetics Of ◽  
Optimal Reaction ◽  
Gene Age

d-mannose has exhibited excellent physiological properties in the food, pharmaceutical, and feed industries. Therefore, emerging attention has been applied to enzymatic production of d-mannose due to its advantage over chemical synthesis. The gene age of N-acetyl-d-glucosamine 2-epimerase family epimerase/isomerase (AGEase) derived from Pseudomonas geniculata was amplified, and the recombinant P. geniculata AGEase was characterized. The optimal temperature and pH of P. geniculata AGEase were 60 °C and 7.5, respectively. The Km, kcat, and kcat/Km of P. geniculata AGEase for d-mannose were 49.2 ± 8.5 mM, 476.3 ± 4.0 s−1, and 9.7 ± 0.5 s−1·mM−1, respectively. The recombinant P. geniculata AGEase was classified into the YihS enzyme subfamily in the AGE enzyme family by analyzing its substrate specificity and active center of the three-dimensional (3D) structure. Further studies on the kinetics of different substrates showed that the P. geniculata AGEase belongs to the d-mannose isomerase of the YihS enzyme. The P. geniculata AGEase catalyzed the synthesis of d-mannose with d-fructose as a substrate, and the conversion rate was as high as 39.3% with the d-mannose yield of 78.6 g·L−1 under optimal reaction conditions of 200 g·L−1d-fructose and 2.5 U·mL−1P. geniculata AGEase. This novel P. geniculata AGEase has potential applications in the industrial production of d-mannose.

Selective Hydrogen Bonding Controls Temperature Response of Layer-by-Layer Upper Critical Solution Temperature Micellar Assemblies

Soft Matter ◽  
2021 ◽  
Author(s):  
Aliaksei Aliakseyeu ◽  
Victoria Albright ◽  
Danielle Yarbrough ◽  
Samantha Hernandez ◽  
Qing Zhou ◽  
...  
Keyword(s):  
Hydrogen Bonding ◽  
Methacrylic Acid ◽  
Temperature Response ◽  
Solution Temperature ◽  
Layer By Layer ◽  
Critical Solution Temperature ◽  
Hydrogen Bonding Interactions ◽  
Upper Critical Solution Temperature ◽  
Lbl Films

This work establishes a correlation between the selectivity of hydrogen-bonding interactions and the functionality of micelle-containing layer-by-layer (LbL) assemblies. Specifically, we explore LbL films formed by assembly of poly(methacrylic acid)...

scholarly journals Thermo- and Photoresponsive Behaviors of Dual-Stimuli-Responsive Organogels Consisting of Homopolymers of Coumarin-Containing Methacrylate

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 329
Author(s):  
Seidai Okada ◽  
Eriko Sato
Keyword(s):  
Functional Group ◽  
Solution Temperature ◽  
Stimuli Responsive ◽  
Critical Solution Temperature ◽  
Equilibrium Degree ◽  
Stimuli Responsive Polymers ◽  
Responsive Polymers ◽  
Dual Functional ◽  
Wide Range ◽  
Increasing Temperature

Coumarin-containing vinyl homopolymers, such as poly(7-methacryloyloxycoumarin) (P1a) and poly(7-(2′-methacryloyloxyethoxy)coumarin) (P1b), show a lower critical solution temperature (LCST) in chloroform, which can be controlled by the [2 + 2] photochemical cycloaddition of the coumarin moiety, and they are recognized as monofunctional dual-stimuli-responsive polymers. A single functional group of monofunctional dual-stimuli-responsive polymers responds to dual stimuli and can be introduced more uniformly and densely than those of dual-functional dual-stimuli-responsive polymers. In this study, considering a wide range of applications, organogels consisting of P1a and P1b, i.e., P1a-gel and P1b-gel, respectively, were synthesized, and their thermo- and photoresponsive behaviors in chloroform were investigated in detail. P1a-gel and P1b-gel in a swollen state (transparent) exhibited phase separation (turbid) through a temperature jump and reached a shrunken state (transparent), i.e., an equilibrium state, over time. Moreover, the equilibrium degree of swelling decreased non-linearly with increasing temperature. Furthermore, different thermoresponsive sites were photopatterned on the organogel through the photodimerization of the coumarin unit. The organogels consisting of homopolymers of coumarin-containing methacrylate exhibited unique thermo- and photoresponsivities and behaved as monofunctional dual-stimuli-responsive organogels.

scholarly journals 2-Amino-5-chloropyridinium cis-diaquadioxalatochromate(III) sesquihydrate

2012 ◽  
Vol 68 (6) ◽  
pp. m824-m825 ◽  
Author(s):  
Ichraf Chérif ◽  
Jawher Abdelhak ◽  
Mohamed Faouzi Zid ◽  
Ahmed Driss
Keyword(s):  
Rotation Axis ◽  
Three Dimensional ◽  
Octahedral Geometry ◽  
Distorted Octahedral Geometry ◽  
Water Molecules ◽  
Lattice Water ◽  
Compound C ◽  
Hydrogen Bonding Interactions ◽  
Distorted Octahedral ◽  
Independent Lattice

In the crystal structure of the title compound, (C5H6ClN2)[Cr(C2O4)2(H2O)2]·1.5H2O, the CrIII atom adopts a distorted octahedral geometry being coordinated by two O atoms of two cis water molecules and four O atoms from two chelating oxalate dianions. The cis-diaquadioxalatochromate(III) anions, 2-amino-5-chloropyridinium cations and uncoordinated water molecules are linked into a three-dimensional supramolecular array by O—H...O and N—H...O hydrogen-bonding interactions. One of the two independent lattice water molecules is situated on a twofold rotation axis.

Sign in / Sign up

Export Citation Format

Share Document