scholarly journals Design and Implementation of a Composite Hydrophone of Sound Pressure and Sound Pressure Gradient

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 939
Author(s):  
Guojun Zhang ◽  
Lansheng Zhang ◽  
Songxiang Ji ◽  
Xi Yang ◽  
Renxin Wang ◽  
...  
Keyword(s):  
Pressure Gradient ◽  
Sound Pressure ◽  
Simulation Analysis ◽  
Engineering Application ◽  
Low Frequency ◽  
Test Analysis ◽  
Vector Channel ◽  
Application Problem ◽  
Vector Hydrophone ◽  
To Receive

The bionic cilium MEMS vector hydrophone has the characteristics of low power consumption, small volume, and good low-frequency response. Nevertheless, there exists the problem of left–right ambiguity in the azimuth estimation of a single hydrophone. In order to solve the engineering application problem, a sound-pressure sound-pressure-gradient hydrophone is designed in this paper. The new composite hydrophone consists of two channels. The bionic cilium microstructure is optimized and used as the vector channel, to collect the sound pressure gradient information, and a scalar channel, based on a piezoelectric ceramic tube, is added, to receive the sound pressure information. The theoretical analysis, simulation analysis, and test analysis of the composite hydrophone are carried out, respectively. The test results show that the sensitivities of the hydrophone can reach up to −188 dB (vector channel) and −204 dB (scalar channel). The problem of left–right ambiguity is solved by combining the sound pressure and sound pressure gradient in different ways. This is of great significance in the engineering application of single cilium MEMS hydrophone orientation.

scholarly journals DEVELOPMENT OF SMALL-SIZE LOW-FREQUENCY PRESSURE GRADIENT SENSORS

2020 ◽  
Author(s):  
В.И. Коренбаум ◽  
С.В. Горовой ◽  
А.А. Тагильцев ◽  
А.Е. Бородин
Keyword(s):  
Pressure Gradient ◽  
Sound Pressure ◽  
Dynamic Range ◽  
Linear Array ◽  
Low Frequency ◽  
Directivity Pattern ◽  
Differential Pressure ◽  
Effective Pressure ◽  
Frequency Range

Проанализированы проблемы создания приемников градиента давления различных типов для использования в низкочастотном диапазоне, определяемые необходимостью достижения достаточной чувствительности к звуковому давлению в плоской волне, коэффициента деления дипольной характеристики направленности не хуже 26 дБ, динамического диапазона не менее 80–100 дБ. Теоретически оценены пределы применимости ПГД 2-гидрофонного (разностного) типов по волновым размерам. Разработаны высоко- эффективные ПГД инерционного и силового типов. Предложено комбинирование ПГД инерционного/силового и 2-гидрофонного типов в линейной антенне. The problems of development of pressure gradient sensors of various types for usage in low-frequency range are analyzed, which are connected to a necessity to provide acceptable sensitivity to sound pressure in a flat wave, minima of the dipole directivity pattern being nor less 26 dB, dynamic range being nor less 80–100 dB. The wavelength limits of acceptability of 2-hydrophone (differential) pressure gradient sensors are theoretically predicted. High effective pressure gradient sensors of inertial and force types are designed. It is suggested to combine a pressure gradient sensor of inertial or force type with the pressure gradient sensor of 2-hydrophone type in linear array.

scholarly journals Low frequency absolute calibration of complex sensitivity of vector receivers in free-field

2019 ◽  
Vol 283 ◽  
pp. 05003
Author(s):  
Guanghui Jia ◽  
Yi Chen ◽  
Zihong Ping ◽  
Teng Fei
Keyword(s):  
Pressure Gradient ◽  
Sound Pressure ◽  
Free Field ◽  
Spherical Wave ◽  
Low Frequency ◽  
Calibration Method ◽  
Absolute Calibration ◽  
Underwater Sound ◽  
Vector Receiver ◽  
Calibration Facility

Three-transducers spherical wave reciprocity method in free-field is demonstrated effectively for absolute calibration of the complex sensitivity of underwater sound pressure gradient of vector receiver in the frequency range 250 Hz to 4 kHz. The regularity of underwater sound pressure gradient distribution in the spherical wave, the theory of three-transducers reciprocity calibration method and the technique of complex moving weighted average (CMWA) are studied and reviewed. The VHS90 vector receiver manufactured by Hangzhou Applied Acoustics Research Institute (HAARI) is calibrated using underwater sound pressure gradient calibration facility in a 50 m×15 m×10 m anechoic tank. To verify the results of measurements, the VHS90 vector receiver is also calibrated using low frequency vector receiver calibration facility and the underwater sound pressure calibration facility. The calibration results and the comparisons with these facilities prove the accuracy of the calibration method and facilities described in this paper. The max deviation of modulus of complex sensitivity is 0.7 dB and max deviation of phase congruency of three channels is 1.6°.

Real Ear Sound Pressure Levels Developed by Three Portable Stereo System Earphones

1992 ◽  
Vol 1 (4) ◽  
pp. 52-55 ◽  
Author(s):  
Gail L. MacLean ◽  
Andrew Stuart ◽  
Robert Stenstrom
Keyword(s):  
High Frequency ◽  
Sound Pressure ◽  
Low Frequency ◽  
Test System ◽  
Output Frequency ◽  
Frequency Effects ◽  
Adult Men ◽  
Frequency Responses ◽  
Significant Difference ◽  
Sound Pressure Levels

Differences in real ear sound pressure levels (SPLs) with three portable stereo system (PSS) earphones (supraaural [Sony Model MDR-44], semiaural [Sony Model MDR-A15L], and insert [Sony Model MDR-E225]) were investigated. Twelve adult men served as subjects. Frequency response, high frequency average (HFA) output, peak output, peak output frequency, and overall RMS output for each PSS earphone were obtained with a probe tube microphone system (Fonix 6500 Hearing Aid Test System). Results indicated a significant difference in mean RMS outputs with nonsignificant differences in mean HFA outputs, peak outputs, and peak output frequencies among PSS earphones. Differences in mean overall RMS outputs were attributed to differences in low-frequency effects that were observed among the frequency responses of the three PSS earphones. It is suggested that one cannot assume equivalent real ear SPLs, with equivalent inputs, among different styles of PSS earphones.

Aerodynamic noise from an asymmetric airfoil with perforated extension plates at the trailing edge

2020 ◽  
pp. 1475472X2097838
Author(s):  
CK Sumesh ◽  
TJS Jothi
Keyword(s):  
High Frequency ◽  
Sound Pressure ◽  
Pore Diameter ◽  
Low Frequency ◽  
Aerodynamic Noise ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Trailing Edge ◽  
High Frequency Noise ◽  
Displacement Thickness

This paper investigates the noise emissions from NACA 6412 asymmetric airfoil with different perforated extension plates at the trailing edge. The length of the extension plate is 10 mm, and the pore diameters ( D) considered for the study are in the range of 0.689 to 1.665 mm. The experiments are carried out in the flow velocity ( U∞) range of 20 to 45 m/s, and geometric angles of attack ( αg) values of −10° to +10°. Perforated extensions have an overwhelming response in reducing the low frequency noise (<1.5 kHz), and a reduction of up to 6 dB is observed with an increase in the pore diameter. Contrastingly, the higher frequency noise (>4 kHz) is observed to increase with an increase in the pore diameter. The dominant reduction in the low frequency noise for perforated model airfoils is within the Strouhal number (based on the displacement thickness) of 0.11. The overall sound pressure levels of perforated model airfoils are observed to reduce by a maximum of 2 dB compared to the base airfoil. Finally, by varying the geometric angle of attack from −10° to +10°, the lower frequency noise is seen to increase, while the high frequency noise is observed to decrease.

scholarly journals Design and implementation of a jellyfish otolith-inspired MEMS vector hydrophone for low-frequency detection

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Renxin Wang ◽  
Wei Shen ◽  
Wenjun Zhang ◽  
Jinlong Song ◽  
Nansong Li ◽  
...  
Keyword(s):  
Structural Parameters ◽  
Low Frequency ◽  
Directivity Pattern ◽  
Stress Distributions ◽  
Strong Response ◽  
Underwater Acoustic ◽  
Frequency Detection ◽  
Vector Hydrophone ◽  
Shock Resistance ◽  
Marine Applications

AbstractDetecting low-frequency underwater acoustic signals can be a challenge for marine applications. Inspired by the notably strong response of the auditory organs of pectis jellyfish to ultralow frequencies, a kind of otolith-inspired vector hydrophone (OVH) is developed, enabled by hollow buoyant spheres atop cilia. Full parametric analysis is performed to optimize the cilium structure in order to balance the resonance frequency and sensitivity. After the structural parameters of the OVH are determined, the stress distributions of various vector hydrophones are simulated and analyzed. The shock resistance of the OVH is also investigated. Finally, the OVH is fabricated and calibrated. The receiving sensitivity of the OVH is measured to be as high as −202.1 dB@100 Hz (0 dB@1 V/μPa), and the average equivalent pressure sensitivity over the frequency range of interest of the OVH reaches −173.8 dB when the frequency ranges from 20 to 200 Hz. The 3 dB polar width of the directivity pattern for the OVH is measured as 87°. Moreover, the OVH is demonstrated to operate under 10 MPa hydrostatic pressure. These results show that the OVH is promising in low-frequency underwater acoustic detection.

Hydrodynamic Noise and Radiated Mechanism of 3D Cavity

2012 ◽  
Vol 217-219 ◽  
pp. 2590-2593 ◽  
Author(s):  
Yu Wang ◽  
Bai Zhou Li
Keyword(s):  
Sound Pressure ◽  
Near Field ◽  
Low Frequency ◽  
Dipole Source ◽  
Fluctuating Pressure ◽  
Common Structure ◽  
Hydrodynamic Noise ◽  
Near Field Sound ◽  
Equivalent Sources ◽  
Field Sound

The flow past 3D rigid cavity is a common structure on the surface of the underwater vehicle. The hydrodynamic noise generated by the structure has attracted considerable attention in recent years. Based on LES-Lighthill equivalent sources method, a 3D cavity is analyzed in this paper, when the Mach number is 0.0048. The hydrodynamic noise and the radiated mechanism of 3D cavity are investigated from the correlation between fluctuating pressure and frequency, the near-field sound pressure intensity, and the propagation directivity. It is found that the hydrodynamic noise is supported by the low frequency range, and fluctuating pressure of the trailing-edge is the largest, which is the main dipole source.

A Novel Broadband Vibration Energy Harvester

2014 ◽  
Vol 644-650 ◽  
pp. 3560-3563
Author(s):  
Yu Liu ◽  
Xiao Yan He ◽  
Shen Liu ◽  
Ying Wu ◽  
Yi Ou
Keyword(s):  
Resonance Frequency ◽  
Energy Harvester ◽  
Engineering Application ◽  
Low Frequency ◽  
Structure Design ◽  
Vibration Energy ◽  
Vibration Energy Harvester ◽  
Collector Efficiency ◽  
Energy Acquisition ◽  
Mode Energy

A single resonance frequency is the main factor of limiting vibration energy collector efficiency. In this paper, the multi degree of freedom oscillation adjusting bandwidth scheme is reported, designing a kind of new broadband vibration energy harvester, which has multi-mode energy acquisition, multi freedom vibration and broadband characteristics. Firstly, Broadband energy collector structure design. Secondly, Combining with the main vibration form, using the ANSYS carried out a detailed analysis of its working model. Finally, designing the prototype and doing some experimental verification, the results show that the designed energy collector with low frequency and wideband energy acquisition performance, the frequency domain of energy collection is 57.6 to 69.45HZ ,which break through the bottleneck of traditional single resonance frequency of energy acquisition, has a high value of theory and engineering application.

scholarly journals Simulation Analysis on Water’s Micro Seepage Laws under Different Pressure Gradients Using Computed Tomography Method

2018 ◽  
Vol 2018 ◽  
pp. 1-26 ◽  
Author(s):  
Gang Zhou ◽  
Lei Qiu ◽  
Wenzheng Zhang ◽  
Jiao Xue
Keyword(s):  
Pressure Gradient ◽  
Mass Flow ◽  
Simulation Analysis ◽  
Effective Porosity ◽  
Pressure Gradients ◽  
Seepage Velocity ◽  
Average Mass ◽  
Depth Analysis ◽  
Tomography Method ◽  
Insight Into

The aim of this paper was to develop a model that can characterize the actual micropore structures in coal and gain an in-depth insight into water’s seepage rules in coal pores under different pressure gradients from a microscopic perspective. To achieve this goal, long-flame coals were first scanned by an X-ray 3D microscope; then, through a representative elementary volume (REV) analysis, the optimal side length was determined to be 60 μm; subsequently, by using Avizo software, the coal’s micropore structures were acquired. Considering that the porosity varies in the same coal sample, this study selected four regions in the sample for an in-depth analysis. Moreover, numerical simulations on water’s seepage behaviors in coal under 30 different pressure gradients were performed. The results show that (1) the variation of the simulated seepage velocity and pressure gradient accorded with Forchheimer’s high-velocity nonlinear seepage rules; (2) the permeability did not necessarily increase with the increase of the effective porosity; (3) in the same model, under different pressure gradients, the average seepage pressure decreased gradually, while the average seepage velocity and average mass flow varied greatly with the increase of the seepage length; and (4) under the same pressure gradient, the increase of the average mass flow from the inlet to the outlet became more significant under a higher inlet pressure.

Sign in / Sign up

Export Citation Format

Share Document