scholarly journals Cyanobacterial Mats in Calcite-Precipitating Serpentinite-Hosted Alkaline Springs of the Voltri Massif, Italy

2020 ◽  
Vol 9 (1) ◽  
pp. 62
Author(s):  
Aysha Kamran ◽  
Kathrin Sauter ◽  
Andreas Reimer ◽  
Theresa Wacker ◽  
Joachim Reitner ◽  
...  
Keyword(s):  
Microbial Communities ◽  
Microbial Mats ◽  
Environmental Dna ◽  
Cyanobacterial Mats ◽  
Cyanobacterial Community ◽  
Mineral Precipitation ◽  
Community Based ◽  
Specific Adaptation ◽  
Carbonate Buildups ◽  
Generation Sequencing

(1) Background: Microbial communities in terrestrial, calcifying high-alkaline springs are not well understood. In this study, we investigate the structure and composition of microbial mats in ultrabasic (pH 10–12) serpentinite springs of the Voltri Massif (Italy). (2) Methods: Along with analysis of chemical and mineralogical parameters, environmental DNA was extracted and subjected to analysis of microbial communities based upon next-generation sequencing. (3) Results: Mineral precipitation and microbialite formation occurred, along with mat formation. Analysis of the serpentinite spring microbial community, based on Illumina sequencing of 16S rRNA amplicons, point to the relevance of alkaliphilic cyanobacteria, colonizing carbonate buildups. Cyanobacterial groups accounted for up to 45% of all retrieved sequences; 3–4 taxa were dominant, belonging to the filamentous groups of Leptolyngbyaceae, Oscillatoriales, and Pseudanabaenaceae. The cyanobacterial community found at these sites is clearly distinct from creek water sediment, highlighting their specific adaptation to these environments.

scholarly journals Multivariate statistical techniques for metagenomic analysis of microbial community recovered from environmental samples

2018 ◽  
Vol 24 ◽  
pp. 45-53 ◽  
Author(s):  
Z Akond ◽  
M Alam ◽  
MS Ahmed ◽  
MNH Mollah
Keyword(s):  
Microbial Communities ◽  
Microbial Mats ◽  
Statistical Techniques ◽  
Multivariate Statistical ◽  
Linear Discriminant ◽  
Metabolic Functions ◽  
Metabolic Variables ◽  
Next Generation Sequencing Ngs ◽  
Generation Sequencing ◽  
Shed Light

High-throughput big dataset generated through next generation sequencing (NGS) of DNA samples helps identify key differences in the function and taxonomy between microbial communities as well as shed light on the diversity of microbes, cooperation and evolution in any particular ecosystem. During this study, three statistical techniques namely, Random Forest (RF), Multidimensional Scaling (MDS) and Linear Discriminant Analysis (LDA) approaches were employed for functional analysis of 212 publicly available metagenomic datasets within and between 10 environments against 27 metabolic functions. RF generates the 8 most important metabolic variables along with MDS and LDA among which Photosynthesis has the highest score (70.20); Phages, prophages has the second highest score (61.31) and Membrane Transport was found to have the eighth highest score (45.29). The MDS plot was found useful to visualize the separation of the microbes from human or animal hosts from other samples along the first dimension and the separation of the aquatic and mat communities along the second dimension. LDA analyses compared the extent of the microbial samples into three broad groups: the human and animal associated samples, the microbial mats, and the aquatic samples. RF showed that phage activity is a major difference between host-associated microbial communities and free-living. The MDS and LDA techniques suggest that mat communities were unique from both the animal associated metagenomes and the aquatic samples with differences in the vitamin and cofactor metabolism.J. bio-sci. 24: 45-53, 2016

scholarly journals Carbon fixation and rhodopsin systems in microbial mats from hypersaline lakes Brava and Tebenquiche, Salar de Atacama, Chile

PLoS ONE ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. e0246656
Author(s):  
Daniel Kurth ◽  
Dario Elias ◽  
María Cecilia Rasuk ◽  
Manuel Contreras ◽  
María Eugenia Farías
Keyword(s):  
Molecular Diversity ◽  
Microbial Mats ◽  
Carbon Fixation ◽  
High Salinity ◽  
Environmental Dna ◽  
Taxonomic Diversity ◽  
Mineral Precipitation ◽  
Hypersaline Lakes ◽  
Taxonomic Level ◽  
Benthic Ecosystems

In this work, molecular diversity of two hypersaline microbial mats was compared by Whole Genome Shotgun (WGS) sequencing of environmental DNA from the mats. Brava and Tebenquiche are lakes in the Salar de Atacama, Chile, where microbial communities are growing in extreme conditions, including high salinity, high solar irradiance, and high levels of toxic metals and metaloids. Evaporation creates hypersaline conditions in these lakes and mineral precipitation is a characteristic geomicrobiological feature of these benthic ecosystems. The mat from Brava was more rich and diverse, with a higher number of different taxa and with species more evenly distributed. At the phylum level, Proteobacteria, Cyanobacteria, Chloroflexi, Bacteroidetes and Firmicutes were the most abundant, including ~75% of total sequences. At the genus level, the most abundant sequences were affilitated to anoxygenic phototropic and cyanobacterial genera. In Tebenquiche mats, Proteobacteria and Bacteroidetes covered ~70% of the sequences, and 13% of the sequences were affiliated to Salinibacter genus, thus addressing the lower diversity. Regardless of the differences at the taxonomic level, functionally the two mats were similar. Thus, similar roles could be fulfilled by different organisms. Carbon fixation through the Wood-Ljungdahl pathway was well represented in these datasets, and also in other mats from Andean lakes. In spite of presenting less taxonomic diversity, Tebenquiche mats showed increased abundance and variety of rhodopsin genes. Comparison with other metagenomes allowed identifying xantorhodopsins as hallmark genes not only from Brava and Tebenquiche mats, but also for other mats developing at high altitudes in similar environmental conditions.

Microbial Communities’ Characterization in Urban Recreational Surface Waters Using Next Generation Sequencing

2021 ◽  
Author(s):  
Laura Vega ◽  
Jesús Jaimes ◽  
Duvan Morales ◽  
David Martínez ◽  
Lissa Cruz-Saavedra ◽  
...  
Keyword(s):  
Next Generation Sequencing ◽  
Microbial Communities ◽  
Surface Waters ◽  
Next Generation ◽  
Generation Sequencing

scholarly journals Structure of Microbial Communities When Complementary Effluents Are Anaerobically Digested

2021 ◽  
Vol 11 (3) ◽  
pp. 1293
Author(s):  
Ana Eusébio ◽  
André Neves ◽  
Isabel Paula Marques
Keyword(s):  
Anaerobic Digestion ◽  
Microbial Communities ◽  
Volatile Fatty Acids ◽  
Olive Mill Wastewater ◽  
Organic Load ◽  
Rrna Gene ◽  
Bacterial Populations ◽  
Next Generation Sequencing Ngs ◽  
Generation Sequencing ◽  
Olive Mill

Olive oil and pig productions are important industries in Portugal that generate large volumes of wastewater with high organic load and toxicity, raising environmental concerns. The principal objective of this study is to energetically valorize these organic effluents—piggery effluent and olive mill wastewater—through the anaerobic digestion to the biogas/methane production, by means of the effluent complementarity concept. Several mixtures of piggery effluent were tested, with an increasing percentage of olive mill wastewater. The best performance was obtained for samples of piggery effluent alone and in admixture with 30% of OMW, which provided the same volume of biogas (0.8 L, 70% CH4), 63/75% COD removal, and 434/489 L CH4/kg SVin, respectively. The validation of the process was assessed by molecular evaluation through Next Generation Sequencing (NGS) of the 16S rRNA gene. The structure of the microbial communities for both samples, throughout the anaerobic process, was characterized by the predominance of bacterial populations belonging to the phylum Firmicutes, mainly Clostridiales, with Bacteroidetes being the subdominant populations. Archaea populations belonging to the genus Methanosarcina became predominant throughout anaerobic digestion, confirming the formation of methane mainly from acetate, in line with the greatest removal of volatile fatty acids (VFAs) in these samples.

scholarly journals Assessing high-throughput environmental DNA extraction methods for meta-barcode characterization of aquatic microbial communities

2018 ◽  
Vol 17 (1) ◽  
pp. 37-49 ◽  
Author(s):  
Abdolrazagh Hashemi Shahraki ◽  
Subba Rao Chaganti ◽  
Daniel Heath
Keyword(s):  
Microbial Community ◽  
Microbial Communities ◽  
High Throughput ◽  
Environmentally Friendly ◽  
Environmental Dna ◽  
Magnetic Bead ◽  
Extraction Methods ◽  
Environmental Research ◽  
Rrna Gene

Abstract The characterization of microbial community dynamics using genomic methods is rapidly expanding, impacting many fields including medical, ecological, and environmental research and applications. One of the biggest challenges for such studies is the isolation of environmental DNA (eDNA) from a variety of samples, diverse microbes, and widely variable community compositions. The current study developed environmentally friendly, user safe, economical, and high throughput eDNA extraction methods for mixed aquatic microbial communities and tested them using 16 s rRNA gene meta-barcoding. Five different lysis buffers including (1) cetyltrimethylammonium bromide (CTAB), (2) digestion buffer (DB), (3) guanidinium isothiocyanate (GITC), (4) sucrose lysis (SL), and (5) SL-CTAB, coupled with four different purification methods: (1) phenol-chloroform-isoamyl alcohol (PCI), (2) magnetic Bead-Robotic, (3) magnetic Bead-Manual, and (4) membrane-filtration were tested for their efficacy in extracting eDNA from recreational freshwater samples. Results indicated that the CTAB-PCI and SL-Bead-Robotic methods yielded the highest genomic eDNA concentrations and succeeded in detecting the core microbial community including the rare microbes. However, our study recommends the SL-Bead-Robotic eDNA extraction protocol because this method is safe, environmentally friendly, rapid, high-throughput and inexpensive.

scholarly journals Profiling soil microbial communities with next-generation sequencing: the influence of DNA kit selection and technician technical expertise

2017 ◽  
Author(s):  
Taha Soliman ◽  
Sung-Yin Yang ◽  
Tomoko Yamazaki ◽  
Holger Jenke-Kodama
Keyword(s):  
Next Generation Sequencing ◽  
Microbial Communities ◽  
Dna Extraction ◽  
Dna Isolation ◽  
Soil Microbial Communities ◽  
Next Generation ◽  
Microbial Composition ◽  
Okinawa Island ◽  
The Impact ◽  
Generation Sequencing

Structure and diversity of microbial communities are an important research topic in biology, since microbes play essential roles in the ecology of various environments. Different DNA isolation protocols can lead to data bias and can affect results of next-generation sequencing. To evaluate the impact of protocols for DNA isolation from soil samples and also the influence of individual handling of samples, we compared results obtained by two researchers (R and T) using two different DNA extraction kits: (1) MO BIO PowerSoil® DNA Isolation kit (MO_R and MO_T) and (2) NucleoSpin® Soil kit (MN_R and MN_T). Samples were collected from six different sites on Okinawa Island, Japan. For all sites, differences in the results of microbial composition analyses (bacteria, archaea, fungi, and other eukaryotes), obtained by the two researchers using the two kits, were analyzed. For both researchers, the MN kit gave significantly higher yields of genomic DNA at all sites compared to the MO kit (ANOVA; P <0.006). In addition, operational taxonomic units for some phyla and classes were missed in some cases: Micrarchaea were detected only in the MN_T and MO_R analyses; the bacterial phylum Armatimonadetes was detected only in MO_R and MO_T; and WIM5 of the phylum Amoebozoa of eukaryotes was found only in the MO_T analysis. Our results suggest the possibility of handling bias; therefore, it is crucial that replicated DNA extraction be performed by at least two technicians for thorough microbial analyses and to obtain accurate estimates of microbial diversity.

scholarly journals Changes in Quinone Profiles of Hot Spring Microbial Mats with a Thermal Gradient

1999 ◽  
Vol 65 (1) ◽  
pp. 198-205 ◽  
Author(s):  
Akira Hiraishi ◽  
Taichi Umezawa ◽  
Hiroyuki Yamamoto ◽  
Kenji Kato ◽  
Yonosuke Maki
Keyword(s):  
Thermal Gradient ◽  
Microbial Mats ◽  
Hot Springs ◽  
Hot Spring ◽  
Thermal Gradients ◽  
Cyanobacterial Mats ◽  
Dissimilarity Index ◽  
Quinone Profile ◽  
Bacterial Mats ◽  
Different Temperatures

ABSTRACT The respiratory and photosynthetic quinones of microbial mats which occurred in Japanese sulfide-containing neutral-pH hot springs at different temperatures were analyzed by spectrochromatography and mass spectrometry. All of the microbial mats that developed at high temperatures (temperatures above 68°C) were so-called sulfur-turf bacterial mats and produced methionaquinones (MTKs) as the major quinones. A 78°C hot spring sediment had a similar quinone profile.Chloroflexus-mixed mats occurred at temperatures of 61 to 65°C and contained menaquinone 10 (MK-10) as the major component together with significant amounts of either MTKs or plastoquinone 9 (PQ-9). The sunlight-exposed biomats growing at temperatures of 45 to 56°C were all cyanobacterial mats, in which the photosynthetic quinones (PQ-9 and phylloquinone) predominated and MK-10 was the next most abundant component in most cases. Ubiquinones (UQs) were not found or were detected in only small amounts in the biomats growing at temperatures of 50°C and above, whereas the majority of the quinones of a purple photosynthetic mat growing at 34°C were UQs. A numerical analysis of the quinone profiles was performed by using the following three parameters: dissimilarity index (D), microbial divergence index (MDq ), and bioenergetic divergence index (BDq ). A D matrix tree analysis showed that the hot spring mats consisting of the sulfur-turf bacteria, Chloroflexus spp., cyanobacteria, and purple phototrophic bacteria formed distinct clusters. Analyses ofMDq and BDq values indicated that the microbial diversity of hot spring mats decreased as the temperature of the environment increased. The changes in quinone profiles and physiological types of microbial mats in hot springs with thermal gradients are discussed from evolutionary viewpoints.

scholarly journals A Simple Technique for the Identification of Environmental DNA (eDNA ) in the Water Samples

2021 ◽  
pp. 77-80
Author(s):  
Chitra K. Y.
Keyword(s):  
Water Samples ◽  
Large Scale ◽  
Dna Isolation ◽  
Simple Technique ◽  
Environmental Dna ◽  
Water Bodies ◽  
Easy Method ◽  
Selective Staining ◽  
Generation Sequencing ◽  
Dark Pink

The environmental DNA(eDNA) is the DNA that is shed by the organisms in their environment by different ways viz. , mucous, faeces, skin, eggs, sperms and also when these organisms die due to natural death or disease. The eDNA will persist for several days. Identification of eDNA is a useful method of determining the organisms present in an aquatic environment like amphibians, reptiles, fishes , insects and larval forms of some of these organisms. By analysing the e-DNA it is possible to monitor the species distribution in water bodies like lakes and ponds simply by collecting a sample of water. The technique can be applied for the survey of the water bodies on a large scale for the genomic, taxonomic as well as pollutional studies. The DNA isolation procedures that are available are laborious and time consuming. Therefore, during the present study, a simplified method was devised i. e. , isolation of eDNA with ethanol after which Feulgen stain was applied to identify and confirm it, as it is an easy method before proceeding to work with the isolated eDNA using other techniqnies for further studies. The Feulgen method is used for the selective staining and the localisation of the DNA in the tissues but is adopted during the present study for the water samples for quick identification of eDNA. The smear of eDNA stained with Feulgen showed dark pink or magenta colour under the microscope where it was concentrated but stained lightly when dispersed and fragmented as observed in the present study. Further studies of the isolated eDNA are in progress in our laboratory for quantifying and sequencing eDNA using latest techniques like next generation sequencing for the identification of fish species in the lakes.

scholarly journals Profiling soil microbial communities with next-generation sequencing: the influence of DNA kit selection and technician technical expertise

2017 ◽  
Author(s):  
Taha Soliman ◽  
Sung-Yin Yang ◽  
Tomoko Yamazaki ◽  
Holger Jenke-Kodama
Keyword(s):  
Next Generation Sequencing ◽  
Microbial Communities ◽  
Dna Extraction ◽  
Dna Isolation ◽  
Soil Microbial Communities ◽  
Next Generation ◽  
Microbial Composition ◽  
Okinawa Island ◽  
The Impact ◽  
Generation Sequencing

Structure and diversity of microbial communities are an important research topic in biology, since microbes play essential roles in the ecology of various environments. Different DNA isolation protocols can lead to data bias and can affect results of next-generation sequencing. To evaluate the impact of protocols for DNA isolation from soil samples and also the influence of individual handling of samples, we compared results obtained by two researchers (R and T) using two different DNA extraction kits: (1) MO BIO PowerSoil® DNA Isolation kit (MO_R and MO_T) and (2) NucleoSpin® Soil kit (MN_R and MN_T). Samples were collected from six different sites on Okinawa Island, Japan. For all sites, differences in the results of microbial composition analyses (bacteria, archaea, fungi, and other eukaryotes), obtained by the two researchers using the two kits, were analyzed. For both researchers, the MN kit gave significantly higher yields of genomic DNA at all sites compared to the MO kit (ANOVA; P <0.006). In addition, operational taxonomic units for some phyla and classes were missed in some cases: Micrarchaea were detected only in the MN_T and MO_R analyses; the bacterial phylum Armatimonadetes was detected only in MO_R and MO_T; and WIM5 of the phylum Amoebozoa of eukaryotes was found only in the MO_T analysis. Our results suggest the possibility of handling bias; therefore, it is crucial that replicated DNA extraction be performed by at least two technicians for thorough microbial analyses and to obtain accurate estimates of microbial diversity.

Sign in / Sign up

Export Citation Format

Share Document