scholarly journals Praziquantel-Solid Lipid Nanoparticles Produced by Supercritical Carbon Dioxide Extraction: Physicochemical Characterization, Release Profile, and Cytotoxicity

Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 3881 ◽  
Author(s):  
Andrade ◽  
Oliveira ◽  
Chaud ◽  
Alves ◽  
Nery ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Encapsulation Efficiency ◽  
Chemical Interaction ◽  
Scale Up ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Solid Lipid ◽  
Cetyl Palmitate

Solid lipid nanoparticles (SLNs) can be produced by various methods, but most of them are difficult to scale up. Supercritical fluid (SCF) is an important tool to produce micro/nanoparticles with a narrow size distribution and high encapsulation efficiency. The aim of this work was to produce cetyl palmitate SLNs using SCF to be loaded with praziquantel (PZQ) as an insoluble model drug. The mean particle size (nm), polydispersity index (PdI), zeta potential, and encapsulation efficiency (EE) were determined on the freshly prepared samples, which were also subject of Differential Scanning Calorimetry (DSC), Fourier-Transform Infrared Spectroscopy (FTIR), drug release profile, and in vitro cytotoxicity analyses. PZQ-SLN exhibited a mean size of ~25 nm, PdI ~ 0.5, zeta potential ~−28 mV, and EE 88.37%. The DSC analysis demonstrated that SCF reduced the crystallinity of cetyl palmitate and favored the loading of PZQ into the lipid matrices. No chemical interaction between the PZQ and cetyl palmitate was revealed by FTIR analysis, while the release or PZQ from SLN followed the Weibull model. PZQ-SLN showed low cytotoxicity against fibroblasts cell lines. This study demonstrates that SCF may be a suitable scale-up procedure for the production of SLN, which have shown to be an appropriate carrier for PZQ.

Development and In Vitro Characterization of Paclitaxel Loaded Solid Lipid Nanoparticles

2019 ◽  
Vol 9 (1) ◽  
pp. 76-85 ◽  
Author(s):  
R. Nithya ◽  
K. Siram ◽  
R. Hariprasad ◽  
H. Rahman
Keyword(s):  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Mcf7 Cells ◽  
Solid Lipid ◽  
Cancerous Cells ◽  
Vitro Release

Background: Paclitaxel (PTX) is a potent anticancer drug which is highly effective against several cancers. Solid lipid nanoparticles (SLNs) loaded with anticancer drugs can enhance its toxicity against tumor cells at low concentrations. Objective: To develop and characterize SLNs of PTX (PSLN) to enhance its toxicity against cancerous cells. Method: The solubility of PTX was screened in various lipids. Solid lipid nanoparticles of PTX (PSLN) were developed by hot homogenization method using Cutina HR and Gelucire 44/14 as lipid carriers and Solutol HS 15 as a surfactant. PSLNs were characterized for size, morphology, zeta potential, entrapment efficiency, physical state of the drug and in vitro release profile in 7.4 pH phosphate buffer saline (PBS). The ability of PTX to enhance toxicity towards cancerous cells was tested by performing cytoxicity assay in MCF7 cell line. Results: Solubility studies of PTX in lipids indicated better solubility when Cutina HR and Gelucire 44/14 were used. PSLNs were found to possess a neutral zeta potential with a size range of 155.4 ± 10.7 nm to 641.9 ± 4.2 nm. In vitro release studies showed a sustained release profile for PSLN over a period of 48 hours. SLNs loaded with PTX were found to be more toxic in killing MCF7 cells at a lower concentration than the free PTX.

scholarly journals Solid Lipid Nanoparticles (SLNs) with Potential as Cosmetic Hair Formulations Made from Otoba Wax and Ultrahigh Pressure Homogenization

Cosmetics ◽  
2020 ◽  
Vol 7 (2) ◽  
pp. 42 ◽  
Author(s):  
Sandra Rubiano ◽  
Juan D. Echeverri ◽  
Constain H. Salamanca
Keyword(s):  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Ultrahigh Pressure ◽  
Solid Lipid ◽  
Internal Phase ◽  
Microbiological Stability ◽  
Intermediate Chains

The development and physicochemical characterization of solid lipid nanoparticles (SLNs) with potential for formulating hair cosmetic products were carried out. SLNs were made from Otoba wax, which is native to the tropical Andean region and has a high chemical composition of fatty acids with intermediate chains. SLNs were formulated by preparing wax-in-water dispersions at two internal phase proportions (low = 5% w/w and high = 20% w/w), using the same ratio of surfactant system and preservatives. The coarse dispersions were subjected to ultrahigh pressure homogenization (UHPH), and thermal stability assays for 4 weeks were carried out, where changes in Creaming Index, droplet size, polydispersity, viscosity, zeta potential, conductivity, and pH were evaluated. The results showed that Otoba wax has a required HLB value around 9 and is mainly composed of lauric (~35%) and myristic (~45%), which have been reported to improve the condition of hair loss. Regarding the development on SLNs, it was found that the internal phase concentration did not considerably affect the physicochemical and microbiological properties. Likewise, it was found that UHPH enabled the production of SLNs with particle sizes <200 nm, low polydispersity (<0.3), high zeta potential values, and suitable physical and microbiological stability. Therefore, Otoba wax has potential for the development of SLNs applicable to cosmetic formulations, especially for hair products.

scholarly journals Freeze-drying of ampicillin solid lipid nanoparticles using mannitol as cryoprotectant

2015 ◽  
Vol 51 (4) ◽  
pp. 797-802 ◽  
Author(s):  
Faezeh Alihosseini ◽  
Solmaz Ghaffari ◽  
Ali Reza Dabirsiaghi ◽  
Setareh Haghighat
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Freeze Drying ◽  
Chemical Interaction ◽  
Average Particle Size ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Average Particle ◽  
Solid Lipid ◽  
The Stability

abstract Solid lipid nanoparticles (SLNs) are interesting colloidal drug-delivery systems, since they have all the advantages of the lipid and polymeric nanoparticles. Freeze-drying is a widely used process for improving the stability of SLNs. Cryoprotectants have been used to decrease SLN aggregations during freeze-drying. In this study Ampicillin was chosen to be loaded in a cholesterol carrier with nano size range. To support the stability of SLNs, freeze-drying was done using mannitol. Particle size, drug release profile and antibacterial effects were studied after freeze-drying in comparison with primary SLNs. Preparations with 5% mannitol showed the least particle size enlargement. The average particle size was 150 and 187 nm before and after freeze-drying, respectively. Freeze-drying did not affect the release profile of drug loaded nanopartilces. Also our study showed that lyophilization did not change the antimicrobial effect of ampicillin SLNs. DSC analysis showed probability of chemical interaction between ampicillin and cholesterol.

Solid Lipid Nanoparticles: A Promising Drug Delivery Technology

2009 ◽  
Vol 2 (2) ◽  
pp. 509-516
Author(s):  
S. Pragati ◽  
S. Kuldeep ◽  
S. Ashok ◽  
M. Satheesh
Keyword(s):  
Drug Delivery ◽  
Solid Lipid Nanoparticles ◽  
Large Scale ◽  
Colloidal Particles ◽  
Scale Up ◽  
Lipid Nanoparticles ◽  
Scale Production ◽  
Research Activity ◽  
New Approach ◽  
Solid Lipid

One of the situations in the treatment of disease is the delivery of efficacious medication of appropriate concentration to the site of action in a controlled and continual manner. Nanoparticle represents an important particulate carrier system, developed accordingly. Nanoparticles are solid colloidal particles ranging in size from 1 to 1000 nm and composed of macromolecular material. Nanoparticles could be polymeric or lipidic (SLNs). Industry estimates suggest that approximately 40% of lipophilic drug candidates fail due to solubility and formulation stability issues, prompting significant research activity in advanced lipophile delivery technologies. Solid lipid nanoparticle technology represents a promising new approach to lipophile drug delivery. Solid lipid nanoparticles (SLNs) are important advancement in this area. The bioacceptable and biodegradable nature of SLNs makes them less toxic as compared to polymeric nanoparticles. Supplemented with small size which prolongs the circulation time in blood, feasible scale up for large scale production and absence of burst effect makes them interesting candidates for study. In this present review this new approach is discussed in terms of their preparation, advantages, characterization and special features.

scholarly journals Eluxadoline Loaded Solid Lipid Nanoparticles for Improved Colon Targeting in Rat Model of Ulcerative Colitis

2020 ◽  
Vol 13 (9) ◽  
pp. 255
Author(s):  
Md. Khalid Anwer ◽  
Mohammed Muqtader Ahmed ◽  
Mohammed F. Aldawsari ◽  
Saad Alshahrani ◽  
Farhat Fatima ◽  
...  
Keyword(s):  
Ulcerative Colitis ◽  
Acetic Acid ◽  
Zeta Potential ◽  
Solid Lipid Nanoparticles ◽  
In Vitro Release ◽  
Lipid Nanoparticles ◽  
Stability Studies ◽  
Solid Lipid ◽  
Vitro Release

The aim of the current study was to evaluate the therapeutics potential of eluxadoline (ELX) loaded solid lipid nanoparticles (SLNs) in ulcerative colitis. ELX loaded SLNs were prepared using three different lipids according to the solvent emulsification technique. The optimization of prepared SLNs (F1-F3) were carried out based on size, PDI, zeta potential, percent drug entrapment (%EE), and loading (%DL). The lipid (stearic acid) based SLNs (F2) was optimized with particle size (266.0 ± 6.4 nm), PDI (0.217 ± 0.04), zeta potential (31.2 ± 5.19 mV), EE (65.0 ± 4.8%), and DL (4.60 ± 0.8%). The optimized SLNs (F2) was further evaluated by DSC, FTIR, SEM, in vitro release, and stability studies, which confirmed the successful encapsulation of ELX in SLNs. The efficacy of optimized SLNs (F2) in comparison to the pure ELX drug was assessed in acetic acid induced colitis rat models. It was observed that the delivery of ELX by SLNs alleviated the induced acetic acid colitis significantly. Thus, ELX loaded SLNs delivery to the colon has a significant potential to be developed for the treatment of ulcerative colitis.

Nephrotoxicity of Albendazole and Albendazole-Loaded Solid Lipid Nanoparticles in Mice with Experimental Hydatidosis

2021 ◽  
Author(s):  
Kobra Kohansal ◽  
Abdollah Rafiei ◽  
Heibatullah Kalantari ◽  
Ali Jelowdar ◽  
Anayatollah Salimi ◽  
...  
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Physicochemical Characterization ◽  
Public Health Problem ◽  
New Product ◽  
Lipid Nanoparticles ◽  
Control Group ◽  
Histopathological Study ◽  
Normal Range ◽  
Solid Lipid

Purposes: Cystic echinococcosis (CE) is a serious contemporary public health problem. Different CE treatment methods are of considerable importance, with albendazole (ABZ) being one of the most preferred drugs for CE treatment and prophylaxis. In this study, we evaluated the nephrotoxicity caused by ABZ and ABZ-loaded solid lipid nanoparticles (SLNs) in mice with experimental hydatid cyst. Methods: ABZ-loaded SLNs were produced by micro-emulsification and a high shear homogenization technique. Thereafter, we evaluated the physicochemical characterization of the product. Live protoscolices were injected into mice to induce experimental hydatidosis. Mice were then treated with ABZ and ABZ-loaded SLNs. The nephrotoxicity effects were evaluated by biochemical and histopathological surveys. Results: Significantly different blood urea nitrogen (BUN) levels were observed between the two infected groups (ABZ treatment and ABZ-loaded SLN treatment) and the control group. The kidney malondialdehyde (MDA) and glutathione (GSH) levels of the infected groups were not significantly different from those of the control group. The histopathological study revealed nephropathic and pathologic changes in the ABZ and ABZ-loaded SLN groups. Conclusion: ABZ formulated for ABZ-loaded SLNs had a more prominent chemoprophylactic efficacy on CE and fewer side effects than ABZ alone. Neither ABZ nor ABZ-loaded SLNs caused significant biochemical and histopathological defects on the kidney, and all functional biochemical markers stayed within the normal range. Therefore, ABZ-loaded SLNs could be a potential new product for CE treatment.

scholarly journals Preparation, characterization and scale-up of sesamol loaded solid lipid nanoparticles

2012 ◽  
Vol 2 (1) ◽  
pp. 8 ◽  
Author(s):  
Vandita Kakkar ◽  
Indu Pal Kaur
Keyword(s):  
Solid Lipid Nanoparticles ◽  
Scale Up ◽  
Spherical Shape ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solid Lipid ◽  
Transmission Electron ◽  
The Brain

Sesamol loaded solid lipid nanoparticles (SSLNs) were prepared with the aim of minimizing its distribution to tissues and achieving its targeting to the brain. Three scale-up batches (100x1 L) of S-SLNs were prepared using a microemulsification technique and all parameters were statistically compared with the small batch (1x;10 mL). S-SLNs with a particle size of less than 106 nm with a spherical shape (transmission electron microscopy) were successfully prepared with a total drug content and entrapment efficiency of 94.26±2.71% and 72.57±5.20%, respectively. Differential scanning calorimetry and infrared spectroscopy confirmed the formation of lipidic nanoparticles while powder X-ray diffraction revealed their amorphous profile. S-SLNs were found to be stable for three months at 5±3°C in accordance with International Conference on Harmonisation guidelines. The SLN preparation process was successfully scaled-up to a 100x batch on a laboratory scale. The procedure was easy to perform and allowed reproducible SLN dispersions to be obtained.

scholarly journals Development of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers of Loteprednol Etabonate: Physicochemical Characterization and Ex Vivo Permeation Studies

2021 ◽  
Author(s):  
Burcu Üner ◽  
Samet Özdemir ◽  
Çetin Taş ◽  
Yıldız Özsoy ◽  
Melike Üner
Keyword(s):  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Lipid Nanoparticles ◽  
Nanostructured Lipid Carriers ◽  
Fickian Diffusion ◽  
Control Group ◽  
Loteprednol Etabonate ◽  
Solid Lipid

Abstract Purpose Loteprednol etabonate (LE) is a new generation corticosteroid that is used for the treatment of inflammatory and allergic conditions of the eye, and management of seasonal allergic rhinitis nasally. LE which is a poorly soluble drug with insufficient bioavailability, has a high binding affinity to steroid receptors. Sophisticated colloidal drug delivery systems of LE could present an alternative for treatment of inflammatory and allergic conditions of the skin. For this purpose, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were attempted to improve for transdermal LE delivery for the first time. Methods SLN and NLC were produced by hot homogenization and ultrasonication technique. Formulations were characterized by dynamic light scattering, scanning electron microscopy, fourier transform infrared spectroscopy and differential scanning calorimetry. Their physical stability was monitored for 3 months of storage. Drug release profiles and permeation properties of SLN and NLC through the porcine skin were investigated. Results It was determined that SLN and NLC below 150 nm particle size had a homogeneous particle size distribution as well as high drug loading capacities. They were found to be stable both physically and chemically at room temperature for 90 days. In terms of release kinetics, it was determined that they released from SLN and NLC in accordance with Fickian diffusion release. Formulations prepared in this study were seen to significantly increase drug penetration through pig skin compared to the control group (p ≤ 0.05). Conclusion SLN and NLC formulations of LE can be stated among the systems that can be an alternative to conventional systems with less side-effect profile in the treatment of inflammatory problems on the skin.

scholarly journals Enhancement of ciprofloxacin activity by incorporating it in solid lipid nanoparticles

2020 ◽  
Vol 19 (5) ◽  
pp. 909-918
Author(s):  
Saqer Alarifi ◽  
Salam Massadeh ◽  
Mohammed Al-Agamy ◽  
Manal A.l. Aamery ◽  
Abdulkareem Al Bekairy ◽  
...  
Keyword(s):  
Escherichia Coli ◽  
Pseudomonas Aeruginosa ◽  
Antimicrobial Activity ◽  
Particle Size ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Release Profile ◽  
Drug Release Profile ◽  
Solid Lipid

Purpose: To incorporate ciprofloxacin (CIP) into solid lipid nanoparticles (SLN) in order to enhance its biopharmaceutical properties and antibacterial activity.Methods: A sonication melt-emulsification method was employed for the preparation of CIP-loaded SLN. The composition of the SLN was varied in order to investigate factors such as lipid type and combination ratio, drug to lipid ratio, and surfactant ratio. The produced SLN formulations wereevaluated for their particle size and shape, zeta potential, and entrapment efficiency. In addition, the effect of SLN formulation composition on its drug release profile and antimicrobial activity against Escherichia coli, Pseudomonas Aeruginosa, and Staphylococcus Aureus was also investigated.Results: The generated nanoparticles had particle size in the range of 165 to 320 nm. The zetapotential values were generally low within ± 5. All formulations exhibited entrapment efficiency between 50 and 90 %. CIP release exhibited a biphasic release profile with a low burst phase, followed by uniform controlled-release behavior of various rates. SLN-loaded CIP exhibited one-fold reduction in minimum inhibitory concentration (MIC) and caused significant inhibition of all the three bacterial strains tested, when compared with pure CIP.Conclusion: Loading of CIP into SLN significantly enhances its antimicrobial activity in vitro which can translate to significant enhancement of therapeutic outcomes by minimizing the dose-dependent adverse and side effects and/or enhancing the antimicrobial spectrum of activity. Keywords: Solid lipid nanoparticles, Sonication melt-emulsification, Ciprofloxacin, Escherichia coli, Pseudomonas aeruginosa

Sign in / Sign up

Export Citation Format

Share Document