scholarly journals Nanocellulose-Based Patches Loaded with Hyaluronic Acid and Diclofenac towards Aphthous Stomatitis Treatment

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 628 ◽  
Author(s):  
João P. F. Carvalho ◽  
Ana C. Q. Silva ◽  
Verónica Bastos ◽  
Helena Oliveira ◽  
Ricardo J. B. Pinto ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
In Vitro Release ◽  
Three Dimensional ◽  
Human Keratinocytes ◽  
Controlled Drug Release ◽  
Dynamic Mechanical Properties ◽  
Aphthous Stomatitis ◽  
Release Mechanism ◽  
Porous Network

Nanostructured patches composed of bacterial nanocellulose (BNC), hyaluronic acid (HA) and diclofenac (DCF) were developed, envisioning the treatment of aphthous stomatitis. Freestanding patches were prepared via diffusion of aqueous solutions of HA and DCF, with different concentrations of DCF, into the wet BNC three-dimensional porous network. The resultant dual polysaccharides-based patches with a nanostructured morphology present thermal stability up to 200 °C, as well as good dynamic mechanical properties, with a storage modulus higher than 1.0 GPa. In addition, the patches are non-cytotoxic to human keratinocytes (HaCaT cells), with a cell viability of almost 100% after 24 h. The in vitro release profile of DCF from the patches was evaluated in simulated saliva, and the data refer to a diffusion- and swelling-controlled drug-release mechanism. The attained results hint at the possibility of using these dual polysaccharides-based oral mucosal patches to target aphthous stomatitis.

scholarly journals Antibacterial Multi-Layered Nanocellulose-Based Patches Loaded with Dexpanthenol for Wound Healing Applications

Nanomaterials ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2469
Author(s):  
Daniela F. S. Fonseca ◽  
João P. F. Carvalho ◽  
Verónica Bastos ◽  
Helena Oliveira ◽  
Catarina Moreirinha ◽  
...  
Keyword(s):  
Wound Healing ◽  
Mechanical Performance ◽  
In Vitro Release ◽  
Human Keratinocytes ◽  
Controlled Drug Release ◽  
Release Mechanism ◽  
Layer By Layer ◽  
Number Of Layers ◽  
Migration Capacity

Antibacterial multi-layered patches composed of an oxidized bacterial cellulose (OBC) membrane loaded with dexpanthenol (DEX) and coated with several chitosan (CH) and alginate (ALG) layers were fabricated by spin-assisted layer-by-layer (LbL) assembly. Four patches with a distinct number of layers (5, 11, 17, and 21) were prepared. These nanostructured multi-layered patches reveal a thermal stability up to 200 °C, high mechanical performance (Young’s modulus ≥ 4 GPa), and good moisture-uptake capacity (240–250%). Moreover, they inhibited the growth of the skin pathogen Staphylococcus aureus (3.2–log CFU mL−1 reduction) and were non-cytotoxic to human keratinocytes (HaCaT cells). The in vitro release profile of DEX was prolonged with the increasing number of layers, and the time-dependent data imply a diffusion/swelling-controlled drug release mechanism. In addition, the in vitro wound healing assay demonstrated a good cell migration capacity, headed to a complete gap closure after 24 h. These results certify the potential of these multi-layered polysaccharides-based patches toward their application in wound healing.

scholarly journals FABRICATION OF NANO CLAY INTERCALATED POLYMERIC MICROBEADS FOR CONTROLLED RELEASE OF CURCUMIN

2021 ◽  
pp. 206-215
Author(s):  
DHARMENDER PALLERLA ◽  
SUMAN BANOTH ◽  
SUNKARI JYOTHI
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Fickian Diffusion ◽  
Simulated Gastric Fluid ◽  
Release Mechanism ◽  
Release Studies ◽  
Swelling Studies ◽  
Vitro Release

Objective: The objective of this study was to formulate and evaluate the Curcumin (CUR) encapsulated sodium alginate (SA)/badam gum (BG)/kaolin (KA) microbeads for controlled drug release studies. Methods: The fabricated microbeads were characterized by fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (X-RD), and scanning electron microscopy (SEM). Dynamic swelling studies and in vitro release kinetics were performed in simulated intestinal fluid (pH 7.4) and simulated gastric fluid (pH 1.2) at 37 °C. Results: FTIR confirms the formation of microbeads. DSC studies confirm the polymorphism of CUR in drug loaded microbeads which indicate the molecular level dispersion of the drug in the microbeads. SEM studies confirmed the microbeads are spherical in shape with wrinkled and rough surfaces. XRD studies reveal the molecular dispersion of CUR and the presence of KA in the developed microbeads. In vitro release studies and swelling studies depend on the pH of test media, which might be suitable for intestinal drug delivery. The % of drug release values fit into the Korsmeyer-Peppas equation and n values are obtained in the range of 0.577-0.664, which indicates that the developed microbeads follow the non-Fickian diffusion drug release mechanism. Conclusion: The results concluded that the CUR encapsulated microbeads are potentially good carriers for controlled drug release studies.

scholarly journals Synthesis and Characterization of Lyophilized Chitosan-Based Hydrogels Cross-Linked with Benzaldehyde for Controlled Drug Release

2020 ◽  
Vol 2020 ◽  
pp. 1-10 ◽  
Author(s):  
Fouad Damiri ◽  
Yahya Bachra ◽  
Chaimaa Bounacir ◽  
Asmae Laaraibi ◽  
Mohammed Berrada
Keyword(s):  
Ascorbic Acid ◽  
Drug Release ◽  
Drug Loading ◽  
In Vitro Release ◽  
Controlled Drug Release ◽  
Tween 20 ◽  
Release Mechanism ◽  
Synthetic Process ◽  
Chitosan Salt

In this study, chitosan-based hydrogels were produced by incorporating three drugs with a different solubility into a polymer matrix. The lyophilized chitosan salt was prepared using an innovative and less-expensive synthetic process by the freeze-drying technique. Firstly, the three drugs (caffeine, ascorbic acid, and 5-fluorouracil (5-FU)) were selected as model drugs to test the in vitro release behavior of the hydrogel. The drugs were solubilized in chitosan salt, lyophilized, and cross-linked with benzaldehyde involving the formation of a Schiff base with (–C=N-) linkage to produce a physical hydrogel. Subsequently, the physicochemical properties of N-benzyl chitosan and lyophilized chitosan salt were evaluated by Fourier-transform infrared (FTIR) spectra, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The intrinsic viscosity of the conventional chitosan was determined by the Mark–Houwink–Sakurada equation. Moreover, the kinetics of hydrogel swelling and drug release were studied by the UV-visible method at physiological conditions (pH = 7.4 at 37°C). The results show that lyophilized N-benzyl chitosan had a maximum swelling ratio of 720 ± 2% by immersion in phosphate-buffered saline solutions (PBS) (pH = 7.4 at 37°C). In vitro drug releases were evaluated in PBS, and the obtained results show that the maximum drug release after 24 h was 42% for caffeine, 99% for 5-FU, and 94% for ascorbic acid. Then, to optimize the cumulative release of caffeine, Tween 20 was added and 98% as a release percentage was obtained. The drug-loading results were investigated with the Korsmeyer–Peppas kinetic model and applied to determine the drug release mechanism.

scholarly journals Dexamethasone-Loaded Lipomers: Development, Characterization, and Skin Biodistribution Studies

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 533
Author(s):  
Eloy Pena-Rodríguez ◽  
Maria Lajarin-Reinares ◽  
Aida Mata-Ventosa ◽  
Sandra Pérez-Torras ◽  
Francisco Fernández-Campos
Keyword(s):  
In Vitro Release ◽  
Human Keratinocytes ◽  
Topical Administration ◽  
In Vitro Cytotoxicity ◽  
Hair Follicles ◽  
Vertical Diffusion ◽  
Biodistribution Studies ◽  
Follicular Targeting ◽  
Depot Effect

Follicular targeting has gained more attention in recent decades, due to the possibility of obtaining a depot effect in topical administration and its potential as a tool to treat hair follicle-related diseases. Lipid core ethyl cellulose lipomers were developed and optimized, following which characterization of their physicochemical properties was carried out. Dexamethasone was encapsulated in the lipomers (size, 115 nm; polydispersity, 0.24; zeta-potential (Z-potential), +30 mV) and their in vitro release profiles against dexamethasone in solution were investigated by vertical diffusion Franz cells. The skin biodistribution of the fluorescent-loaded lipomers was observed using confocal microscopy, demonstrating the accumulation of both lipomers and fluorochromes in the hair follicles of pig skin. To confirm this fact, immunofluorescence of the dexamethasone-loaded lipomers was carried out in pig hair follicles. The anti-inflammatory (via TNFα) efficacy of the dexamethasone-loaded lipomers was demonstrated in vitro in an HEK001 human keratinocytes cell culture and the in vitro cytotoxicity of the nanoformulation was investigated.

scholarly journals DESIGN AND IN VITRO/IN VIVO EVALUATION OF EXTENDED RELEASE MATRIX TABLETS OF NATEGLINIDE

2018 ◽  
Vol 7 (6) ◽  
Author(s):  
Mohini Sihare ◽  
Rajendra Chouksey
Keyword(s):  
Drug Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Release Profile ◽  
Matrix Tablets ◽  
In Vivo Studies ◽  
Release Mechanism ◽  
In Vivo Evaluation

Aim: Nateglinide is a quick acting anti-diabetic medication whose potent activity lasts for a short duration. One of the dangerous side effects of nateglinide administration is rapid hypoglycemia, a condition that needs to be monitored carefully to prevent unnecessary fatalities. The aim of the study was to develop a longer lasting and slower releasing formulation of nateglinide that could be administered just once daily. Methods: Matrix tablets of nateglinide were prepared in combination with the polymers hydroxypropylmethylcellulose (HPMC), eudragits, ethyl cellulose and polyethylene oxide and the formulated drug release patterns were evaluated using in vitro and in vivo studies. Conclusion: Of the seventeen formulated matrix tablets tested, only one formulation labelled HA-2 that contained 15% HPMC K4M demonstrated release profile we had aimed for. Further, swelling studies and scanning electron microscopic analysis confirmed the drug release mechanism of HA-2. The optimized formulation HA-2 was found to be stable at accelerated storage conditions for 3 months with respect to drug content and physical appearance. Mathematical analysis of the release kinetics of HA-2 indicated a coupling of diffusion and erosion mechanisms. In-vitro release studies and pharmacokinetic in vivo studies of HA-2 in rabbits confirmed the sustained drug release profile we had aimed for. Keywords: Hydroxypropylmethylcellulose, Matrix tablets, Nateglinide, Sustained release

scholarly journals Novel Gliclazide Electrosprayed Nano-Solid Dispersions: Physicochemical Characterization and Dissolution Evaluation

2019 ◽  
Vol 9 (2) ◽  
pp. 231-240
Author(s):  
Khosro Adibkia ◽  
Solmaz Ghajar ◽  
Karim Osouli-Bostanabad ◽  
Niloufar Balaei ◽  
Shahram Emami ◽  
...  
Keyword(s):  
Drug Release ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Physicochemical Characterization ◽  
Amorphous State ◽  
Water Soluble ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Peg 6000

Purpose: In the current study, electrospraying was directed as a novel alternative approach to improve the physicochemical attributes of gliclazide (GLC), as a poorly water-soluble drug, by creating nanocrystalline/amorphous solid dispersions (ESSs). Methods: ESSs were formulated using Eudragit® RS100 and polyethylene glycol (PEG) 6000 as polymeric carriers at various drug: polymer ratios (i.e. 1:5 and 1:10) with different total solution concentrations of 10, 15, and 20% w/v. Morphological, physicochemical, and in-vitro release characteristics of the developed formulations were assessed. Furthermore, GLC dissolution behaviors from ESSs were fitted to various models in order to realize the drug release mechanism. Results: Field emission scanning electron microscopy analyses revealed that the size and morphology of the ESSs were affected by the drug: polymer ratios and solution concentrations. The polymer ratio augmentation led to increase in the particle size while the solution concentration enhancement yielded in a fiber establishment. Differential scanning calorimetry and powder X-ray diffraction investigations demonstrated that the ESSs were present in an amorphous state. Furthermore, the in vitro drug release studies depicted that the samples prepared employing PEG 6000 as carrier enhanced the dissolution rate and the model that appropriately fitted the release behavior of ESSs was Weibull model, where demonstrating a Fickian diffusion as the leading release mechanism. Fourier-transform infrared spectroscopy results showed a probability of complexation or hydrogen bonding, development between GLC and the polymers in the solid state. Conclusion: Hence the electrospraying system avails the both nanosizing and amorphization advantages, therefore, it can be efficiently applied to formulating of ESSs of BCS Class II drugs.

scholarly journals α-Mangostin Hydrogel Film Based Chitosan–Alginate for Recurrent Aphthous Stomatitis

2019 ◽  
Vol 9 (23) ◽  
pp. 5235 ◽  
Author(s):  
Nasrul Wathoni ◽  
Nia Yuniarsih ◽  
Arief Cahyanto ◽  
Muhctaridi Muhctaridi
Keyword(s):  
In Vitro Release ◽  
Recurrent Aphthous Stomatitis ◽  
Aphthous Stomatitis ◽  
Fickian Diffusion ◽  
Garcinia Mangostana ◽  
Scanning Calorimetry ◽  
Main Compound ◽  
Discovery Studio ◽  
Hydrogel Film

Many antiseptic drugs, local anaesthetics, and corticosteroids have been used for effective therapy of recurrent aphthous stomatitis (RAS). However, these drugs have harmful side effects. α-mangostin (α-M), a main compound of mangosteen (Garcinia mangostana L.) peel, has been known as a wound healing agent. In addition, hydrogel film as dressings designed to separate mucosal lesions from the oral environment, and improve the effectiveness of RAS therapy. The purpose of this study was to develop α-M hydrogel film based chitosan–alginate (ChAlg/α-M HF) for RAS. The in silico study by Discovery studio visualizer and AutoDock confirmed that hydrogen bonding between Ch, Alg, and α-M occurred. The results of physicochemical characterizations by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD) indicated that the ChAlg/α-M HF had a lower crystalline form compared to pure α-M. In addition, ChAlg/α-M HF significantly improved the swelling ratio and tensile strength compared to that of ChAlg HF. Moreover, the existence of Alg increased the degradability of Ch, and closely related to the release of α-M from ChAlg HF. The in vitro release study confirmed that the release of α-M from ChAlg/α-M HF was the Fickian diffusion model. Finally, the mucoadhesive study revealed that ChAlg/α-M HF had a good mucoadhesive property. These results suggest that hydrogel film-based chitosan–alginate have the potential as carriers of α-M for RAS therapy.

scholarly journals Preparation and Evaluation of Collagen-Based Patches as Curcumin Carriers

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2393
Author(s):  
Zoi Terzopoulou ◽  
Anna Michopoulou ◽  
Artemis Palamidi ◽  
Elena Koliakou ◽  
Dimitrios Bikiaris
Keyword(s):  
Topical Treatment ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Human Keratinocytes ◽  
Inhibitory Effect ◽  
Psoriatic Skin ◽  
Burst Release ◽  
Swelling Ratio ◽  
Natural Polyphenol

Patients with psoriasis are dissatisfied with the standard pharmacological treatments, whether systemic or topical, with many of them showing interest in complementary and alternative medicine. Curcumin (Cur), a natural polyphenol derived from turmeric, has recently gained attention for skin-related diseases because of its proven anti-inflammatory action. However, topical treatment with Cur would be inadequate because of its hydrophobicity, instability, and low bioavailability. In addition, hyperkeratosis and lack of moisture in psoriatic skin result in low penetration that would prevent actives from permeating the stratum corneum. In this work, a polymer-based formulation of Cur for the topical treatment of psoriasis is reported. To improve the physicochemical stability of Cur, it was first encapsulated in chitosan nanoparticles. The Cur-loaded nanoparticles were incorporated in a hydrophilic, biocompatible collagen-based patch. The nanoparticle-containing porous collagen patches were then chemically cross-linked. Morphology, chemical interactions, swelling ratio, enzymatic hydrolysis, and Cur release from the patches were evaluated. All patches showed excellent swelling ratio, up to ~1500%, and after cross-linking, the pore size decreased, and their hydrolysis rates decelerated. The in vitro release of Cur was sustained with an initial burst release, reaching 55% after 24 h. Cur within the scaffolds imparted a proliferation inhibitory effect on psoriatic human keratinocytes in vitro.

scholarly journals DESIGN AND CHARACTERISATION OF TRANSDERMAL PATCHES OF PHENFORMIN HYDROCHLORIDE

2017 ◽  
Vol 9 (6) ◽  
pp. 90
Author(s):  
Pratik Swarup Das ◽  
Puja Saha
Keyword(s):  
Drug Release ◽  
Diffusion Mechanism ◽  
Skin Irritation ◽  
In Vitro Release ◽  
Chemical Properties ◽  
In Vitro Dissolution ◽  
Release Mechanism ◽  
Transdermal Patches ◽  
The Matrix

Objective: In present work was designed to develop suitable transdermal matrix patches of Phenformin hydrochloride using various hydrophilic (HPMC) and hydrophobic (EUDRAGID) polymers as matrix formers.Methods: Transdermal patches containing Phenformin hydrochloride were prepared by the solvent casting evaporation technique.Results: Revealed that prepared patches showed good physical characteristics, no drug-polymer interaction and no skin irritation was observed. The in vitro release study revealed that F3 formulation showed maximum release in 24 h. Formulation F3 was subjected for accelerated stability studies. The F3 formulation was found to be stable as there was no drastic change in the Physico-chemical properties of the patches, which was also confirmed by FTIR.Conclusion: Thus conclusion can be made that stable transdermal patches of Phenformin hydrochloride has been developed. F1, F2, F3, F4 formulations showed highest cumulative percentage drug release of 98.13%, 95.50%, 98.65%, 97.21% were obtained during in vitro drug release studies after 24 h. The release of Phenformin hydrochloride appears to be dependent on lipophilicity of the matrix. Moderately lipophillic matrices showed best release. The predominant release mechanism of drug through the fabricated matrices was believed to be by diffusion mechanism. Based upon the in vitro dissolution data the F3 formulation was concluded as optimized formulation.

Sign in / Sign up

Export Citation Format

Share Document