scholarly journals Preparation and Evaluation of Collagen-Based Patches as Curcumin Carriers

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2393
Author(s):  
Zoi Terzopoulou ◽  
Anna Michopoulou ◽  
Artemis Palamidi ◽  
Elena Koliakou ◽  
Dimitrios Bikiaris
Keyword(s):  
Topical Treatment ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Human Keratinocytes ◽  
Inhibitory Effect ◽  
Psoriatic Skin ◽  
Burst Release ◽  
Swelling Ratio ◽  
Natural Polyphenol

Patients with psoriasis are dissatisfied with the standard pharmacological treatments, whether systemic or topical, with many of them showing interest in complementary and alternative medicine. Curcumin (Cur), a natural polyphenol derived from turmeric, has recently gained attention for skin-related diseases because of its proven anti-inflammatory action. However, topical treatment with Cur would be inadequate because of its hydrophobicity, instability, and low bioavailability. In addition, hyperkeratosis and lack of moisture in psoriatic skin result in low penetration that would prevent actives from permeating the stratum corneum. In this work, a polymer-based formulation of Cur for the topical treatment of psoriasis is reported. To improve the physicochemical stability of Cur, it was first encapsulated in chitosan nanoparticles. The Cur-loaded nanoparticles were incorporated in a hydrophilic, biocompatible collagen-based patch. The nanoparticle-containing porous collagen patches were then chemically cross-linked. Morphology, chemical interactions, swelling ratio, enzymatic hydrolysis, and Cur release from the patches were evaluated. All patches showed excellent swelling ratio, up to ~1500%, and after cross-linking, the pore size decreased, and their hydrolysis rates decelerated. The in vitro release of Cur was sustained with an initial burst release, reaching 55% after 24 h. Cur within the scaffolds imparted a proliferation inhibitory effect on psoriatic human keratinocytes in vitro.

scholarly journals DEVELOPMENT AND CHARACTERIZATION OF DOXORUBICIN AND siRNA ENCAPSULATED CHITOSAN NANOPARTICLES

2020 ◽  
pp. 53-56
Author(s):  
TAIHASEEN MOMIN ◽  
ARVIND GULBAKE
Keyword(s):  
Particle Size ◽  
Zeta Potential ◽  
Encapsulation Efficiency ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Burst Release ◽  
Transmission Electron Micrograph ◽  
Cancer Breast ◽  
Gel Retardation

Objective: Chitosan nanoparticles (ChNP’s) have been widely studied for drug and gene delivery. In this study, we prepared ChNP’s for co-delivery of doxorubicin (DOX) and siRNA for cancer treatment. Methods: The ionic gelation method was used to develop ChNP’s. The positively charged DOX and negatively charged siRNA encapsulated into ChNP’s. The particle size and zeta potential of the developed ChNP’s were studied by particle size analyzer and morphology was examined by TEM. Encapsulation of DOX in ChNP’s was confirmed by FTIR spectroscopy. The encapsulation efficiency and in vitro release of DOX were studied by UV-Vis spectrophotometry. The siRNA loading into ChNP’s was confirmed by gel retardation assay. Results: The developed ChNP’s showed particle size ranged from 127±6.5 to 215±8.5 nm with zeta potential ranged from 16.5±0.3 to 25.8±0.3. Transmission Electron Micrograph showed DOX and siRNA encapsulated ChNP’s are polydisperse and spherical in nature. FTIR study confirmed the binding of DOX with ChNP’s with absorption peaks at 1016 cm-1,1316 cm-1, 1412 cm-1, 1645 cm-1 and 3370 cm-1. The TPP:Ch ratio 0.1:0.5 showed the highest encapsulation efficiency 69±3.24%, with initial burst release and then sustained or slow release of DOX. Agarose gel retardation study confirmed the encapsulation of siRNA in ChNP’s by retarded migration of siRNA-ChNP’s in comparison with naked siRNA. Conclusion: The developed ChNP’s successfully encapsulated the DOX and siRNA and showed the sustain release of DOX. In conclusion, our study shown that ChNP’s is having a potential of co-loading of DOX-siRNA as an efficient drug delivery system for the treatment of various cancers such as colorectal cancer, breast cancer etc.

Preparation and In Vitro Evaluation of Resealed Erythrocytes as A New Trend in Treatment of Asthma

2016 ◽  
Vol 6 (3) ◽  
Author(s):  
Mohammed Ibrahim ◽  
Alaa Zaky ◽  
Mohsen Afouna ◽  
Ahmed Samy
Keyword(s):  
In Vitro Release ◽  
Human Erythrocytes ◽  
The Body ◽  
Blood Levels ◽  
Time Interval ◽  
Burst Release ◽  
Prolonged Release ◽  
Nocturnal Asthma ◽  
Carrier Erythrocytes

Carrier erythrocytes are emerging as one of the most promising biological drug delivery systems investigated in recent decades. Beside its biocompatibility, biodegradability and ability to circulate throughout the body, it has the ability to perform extended release system of the drug for a long period. The ultimate goal of this study is to introduce a new carrier system for Salbutamol, maintaining suitable blood levels for a long time, as atrial to resolve the problems of nocturnal asthma medication Therefore in this work we study the effect of time, temperature as well as concentration on the loading of salbutamol in human erythrocytes to be used as systemic sustained release delivery system for this drug. After the loading process is performed the carrier erythrocytes were physically and cellulary characterized. Also, the in vitro release of salbutamol from carrier erythrocytes was studied over time interval. From the results it was found that, human erythrocytes have been successfully loaded with salbutamol using endocytosis method either at 25 Co or at 37 Co . The highest loaded amount was 3.5 mg/ml and 6.5 mg/ml respectively. Moreover, the percent of cells recovery is 90.7± 1.64%. Hematological parameters and osmotic fragility behavior of salbutamol loaded erythrocytes were similar that of native erythrocytes. Scanning electron microscopy demonstrated that the salbutamol loaded cells has moderate change in the morphology. Salbutamol releasing from carrier cell was 43% after 36 hours in phosphate buffer saline. The releasing pattern of the drug from loaded erythrocytes showed initial burst release in the first hour followed by a very slow release, obeying zero order kinetics. It concluded that salbutamol is successfully entrapped into erythrocytes with acceptable loading parameters and moderate morphological changes, this suggesting that erythrocytes can be used as prolonged release carrier for salbutamol.

Formulation of Modified Release Atorvastatin Nanoparticles by Emulsion Interfacial Reaction Method

2015 ◽  
Vol 8 (3) ◽  
pp. 2937-2940
Author(s):  
Sudhakar Sekar ◽  
Shee Sim May
Keyword(s):  
Interfacial Reaction ◽  
Therapeutic Potential ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Morphological Characteristics ◽  
Preparation Technique ◽  
Modified Release ◽  
Reaction Method ◽  
Vitro Release

The aim of the study is to formulate a modified release chitosan nanoparticles for the oral delivery of atorvastatin and to study the in vitro release of atorvastatin from chitosan nanoparticles. Atorvastatin-loaded chitosan nanoparticles were prepared with different concentration of cross-linking agent (glutaraldehyde) by emulsion interfacial reaction method. The formed nanoparticles were characterized in terms of size and morphological characteristics by scanning electron microscopy (SEM) and transmission electron microscope (TEM). Spherical and regular nanoparticles with the size range of 100-250nm were formed. Atorvastatin encapsulation efficiency of nanoparticles was found to be highest in ANP3, followed by ANP2 and ANP1. The in vitro release of atorvastatin was studied by membrane diffusion technique. The resulted cumulative percentage of drug released for ANP1, ANP2 and ANP3 were 60.08%, 34.81% and 20.39% respectively. Through this study, the nanoparticles preparation technique has shown to be a promising approach for enhancing the dissolution of hydrophobic drugs like atorvastatin calcium. The application of this novel delivery system offers good therapeutic potential in the management of hypercholesterolemia and dyslipidemia.

Quality-by-Design Enabled Chitosan Nanoparticles for Antitubercular Therapy: Formulation, Statistical Optimization, and In vitro Characterization

2020 ◽  
Vol 15 ◽  
Author(s):  
Manasi M. Chogale ◽  
Sujay S. Gaikwad ◽  
Savita P. Kulkarni ◽  
Vandana B. Patravale
Keyword(s):  
Side Effects ◽  
Treatment Regimen ◽  
Research Work ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Antitubercular Therapy ◽  
Prolonged Treatment ◽  
High Dose ◽  
Average Size

Background: Tuberculosis (TB) continues to be among the leading causes for high mortality among developing countries. Though a seemingly effective treatment regimen against TB is in place, there has been no significant improvement in the therapeutic rates. This is primarily owing to the high drug doses, their associated sideeffects, and prolonged treatment regimen. Discontinuation of therapy due to the severe side effects of the drugs results in the progression of the infection to the more severe drug-resistant TB. Objectives: Reformulation of the current existing anti TB drugs into more efficient dosage forms could be an ideal way out. Nanoformulations have been known to mitigate the side effects of toxic, high-dose drugs. Hence, the current research work involves the formulation of Isoniazid (INH; a first-line anti TB molecule) loaded chitosan nanoparticles for pulmonary administration. Methods: INH loaded chitosan nanoparticles were prepared by ionic gelation method using an anionic crosslinker. Drugexcipient compatibility was evaluated using DSC and FT-IR. The formulation was optimized on the principles of Qualityby-Design using a full factorial design. Results: The obtained nanoparticles were spherical in shape having an average size of 620±10.97 nm and zeta potential +16.87±0.79 mV. Solid state characterization revealed partial encapsulation and amorphization of INH into the nanoparticulate system. In vitro release study confirmed an extended release of INH from the system. In vitro cell line based safety and efficacy studies revealed satisfactory results. Conclusion: The developed nanosystem is thus an efficient approach for antitubercular therapy.

scholarly journals Dexamethasone-Loaded Lipomers: Development, Characterization, and Skin Biodistribution Studies

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 533
Author(s):  
Eloy Pena-Rodríguez ◽  
Maria Lajarin-Reinares ◽  
Aida Mata-Ventosa ◽  
Sandra Pérez-Torras ◽  
Francisco Fernández-Campos
Keyword(s):  
In Vitro Release ◽  
Human Keratinocytes ◽  
Topical Administration ◽  
In Vitro Cytotoxicity ◽  
Hair Follicles ◽  
Vertical Diffusion ◽  
Biodistribution Studies ◽  
Follicular Targeting ◽  
Depot Effect

Follicular targeting has gained more attention in recent decades, due to the possibility of obtaining a depot effect in topical administration and its potential as a tool to treat hair follicle-related diseases. Lipid core ethyl cellulose lipomers were developed and optimized, following which characterization of their physicochemical properties was carried out. Dexamethasone was encapsulated in the lipomers (size, 115 nm; polydispersity, 0.24; zeta-potential (Z-potential), +30 mV) and their in vitro release profiles against dexamethasone in solution were investigated by vertical diffusion Franz cells. The skin biodistribution of the fluorescent-loaded lipomers was observed using confocal microscopy, demonstrating the accumulation of both lipomers and fluorochromes in the hair follicles of pig skin. To confirm this fact, immunofluorescence of the dexamethasone-loaded lipomers was carried out in pig hair follicles. The anti-inflammatory (via TNFα) efficacy of the dexamethasone-loaded lipomers was demonstrated in vitro in an HEK001 human keratinocytes cell culture and the in vitro cytotoxicity of the nanoformulation was investigated.

scholarly journals Antimicrobial Properties and Release Profile of Ampicillin from Electrospun Poly(εepsilon;-caprolactone) Nanofiber Yarns

2010 ◽  
Vol 5 (4) ◽  
pp. 155892501000500 ◽  
Author(s):  
Hang Liu ◽  
Karen K. Leonas ◽  
Yiping Zhao
Keyword(s):  
In Vitro Release ◽  
Antimicrobial Properties ◽  
Fiber Surface ◽  
Electrospun Nanofibers ◽  
Release Profile ◽  
Burst Release ◽  
Spun Yarns ◽  
Surgical Sutures ◽  
Release Model

Poly(εepsilon;-caprolactone) (PCL) electrospun fibers containing ampicillin sodium salt have been produced and twisted into nanofiber yarns. The fiber diameters and crystallinity, the in vitro antimicrobial properties of the yarns, and the in vitro release of ampicillin from yarns containing various ampicillin concentrations are studied. Decreased fiber diameters and reduced diameter variation are observed with the addition of ampicillin salt into the polymer solution. The results from the zone of inhibition test of the yarns against both gram-positive Staphylococcus aureus and gram-negative Klebsiella pneumoniae indicate that the released ampicillin retains its effectiveness after the production processes, therefore the as-spun yarns are antimicrobial active. A burst release of ampicillin from the yarns has been observed in the first hour, and the release is almost completed in 96 hours. The burst release is believed to be due to the low compatibility of ampicillin with PCL, the accumulation of ampicillin on fiber surface and the small fiber diameters. An empirical release model is developed to describe the release profile. The results indicate that the electrospun nanofibers yarns will have a great potential to be used for biomaterials, such as surgical sutures, to decrease the surgical site infection rate.

scholarly journals DEVELOPMENT, CHARACTERIZATION AND IN VITRO RELEASE KINETIC STUDIES OF IBANDRONATE LOADED CHITOSAN NANOPARTICLES FOR EFFECTIVE MANAGEMENT OF OSTEOPOROSIS

2021 ◽  
pp. 120-125
Author(s):  
S. PATHAK ◽  
S. P. VYAS ◽  
A. PANDEY
Keyword(s):  
Electron Microscopy ◽  
Particle Size ◽  
Sodium Tripolyphosphate ◽  
Release Kinetics ◽  
Ph Effect ◽  
Chitosan Nanoparticles ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Release Kinetic

Objective: The objective of the present study was to develop, optimize, and evaluate Ibandronate-sodium loaded chitosan nanoparticles (Ib-CS NPs) to treat osteoporosis. Methods: NPs were prepared by the Ionic gelation method and optimized for various parameters such as the effect of concentration of chitosan, sodium tripolyphosphate (TPP), and pH effect on particle size polydispersity index (PDI), zeta potential, and entrapment efficiency. The prepared nanoparticles were characterized using particle size analyzer (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-Transform Infrared spectroscopy (FTIR).  Results: Formulated NPs were obtained in the average nano size in the range below 200 nm in TEM, SEM, and DLS studies. The particle size and encapsulation efficiency of the optimized formulation were 176.1 nm and 63.28%, respectively. The release profile of NPs was depended on the dissolution medium and followed the First-order release kinetics. Conclusion: Bisphosphonates are the most commonly prescribed drugs for treating osteoporosis in the US and many other countries, including India. Ibandronate is a widely used anti-osteoporosis drug, exhibits a strong inhibitory effect on bone resorption performed by osteoclast cells. Our results indicated that Ibandronate sodium-loaded chitosan nanoparticles provide an effective medication for the treatment of osteoporosis.

Mixed Poloxamer Nanomicelles for the Anticonvulsant Lamotrigine Drug: Solubility, Micellar Characterization, and In-Vitro Release Studies

2021 ◽  
Vol 21 (11) ◽  
pp. 5723-5735
Author(s):  
Sofiya Shaikh ◽  
Hemil Patel ◽  
Debes Ray ◽  
Vinod K. Aswal ◽  
Rakesh K. Sharma
Keyword(s):  
In Vitro Release ◽  
Systematic Investigation ◽  
Burst Release ◽  
Drug Solubility ◽  
Biphasic Model ◽  
Release Studies ◽  
Stability Data ◽  
A Chain ◽  
Vitro Release

Recently the applications of Poloxamers in drug development is promising as it facilitated the drug molecule for delivering to the correct place, at the correct time and in the correct amount. Poloxamers can form nanomicelles to encapsulate hydrophobic drugs in order to increase solubility, stability and facilitate delivery at target. In this context, the solubilization of anticonvulsant lamotrigine (LMN) drug in a chain of Poloxamers containing different polyethylene oxide and polypropylene oxide noieties were examined. The results showed better solubilization of LMN in Poloxamers contain low CMTs while poor with Poloxamers having high CMTs. Systematic investigation of two mixed Poloxamer nanomicelles (P407:P403 and P407:P105) for LMN bioavailability at body temperature (37 °C) were investigated. The solubility of LMN was enhanced in mixed P407:P403 nanomicelles with the amount of P403 and reduced in mixed P407:P105 nanomicelles with the amount of P105. LMN encapsulated mixed Poloxamer nanomicelles were found spherical in shape with ~25 nm Dh sizes. The In-Vitro release profiles of mixed Poloxamer nanomicelles demonstrated the biphasic model with initial burst release and then slowly release of LMN. Better biocompatibility of LMN in the mixed P407:P403 nanomicelles was confirmed with stability data. The results of this work were proven the mixed P407:P403 nanomicelles as efficient nanocarriers for LMN.

scholarly journals A multiple drug loaded, functionalized pH-sensitive nanocarrier as therapeutic and epigenetic modulator for osteosarcoma

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Ye Yuan ◽  
Jia-Xing Song ◽  
Mei-Na Zhang ◽  
Bao-Shan Yuan
Keyword(s):  
Zoledronic Acid ◽  
Cellular Uptake ◽  
Bone Cells ◽  
In Vitro Release ◽  
Multiple Drug ◽  
Burst Release ◽  
Cytotoxicity Studies ◽  
Bone Powder ◽  
Vitro Release

Abstract Osteosarcoma is a malignant condition affecting adolescents and children more than adults. Nanobiomedicine has opened up several avenues which have increased therapeutic efficiencies than the conventional treatment for the same. In the current study, a novel organic nanoparticle was devised conjugated with bisphosphonate zoledronic acid which has an affinity for bone tissues. Moreover, the nanoparticle was loaded with multiple anti-cancer drugs like gemcitabine and epirubicin. The nanoparticles were characterized by microscopic analysis, entrapment and loading efficiencies, bone affinity studies, in-vitro release studies, cytotoxicity studies and finally in-vivo tumor regression studies. Bone affinity studies depicted a high affinity of zoledronic acid towards bone powder. The nanoparticle exhibited a nanosize dimension, high entrapment and loading efficiencies with uniform symmetry devoid of agglomeration. The in-vitro release experiments showed a measured release of drugs over a longer time without any hint of burst release. However, the release was comparatively for a longer duration in acidic pH and normal physiological pH which may be excellent for therapeutic efficiency. The cytotoxicity studies revealed enhanced cytotoxic effect for MG-63 cell lines in comparison of free drug or single drug combinations. Nonetheless, they proved to be cytocompatible with primary bone cells. Additionally, cellular uptake of nanoparticle was appreciably improved. Significant tumor (250%) regression was seen upon treatment with multiple drug loaded zoledronic acid conjugated nanoparticle, along with epigenetic changes affecting microRNA expressions. The increased cytotoxicity and increased cellular uptake may be of greater advantage in systemic osteosarcoma therapy. Combining all results, our study demonstrated substantial potential towards management of osteosarcoma.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

Sign in / Sign up

Export Citation Format

Share Document