scholarly journals Enhanced Activity of Hierarchical Nanostructural Birnessite-MnO2-Based Materials Deposited onto Nickel Foam for Efficient Supercapacitor Electrodes

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1933
Author(s):  
Shang-Chao Hung ◽  
Yi-Rong Chou ◽  
Cheng-Di Dong ◽  
Kuang-Chung Tsai ◽  
Wein-Duo Yang
Keyword(s):  
Electrochemical Performance ◽  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Nickel Foam ◽  
Rate Capability ◽  
Multiwall Carbon Nanotubes ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Pore Size Distributions ◽  
Hierarchical Porous

Hierarchical porous birnessite-MnO2-based nanostructure composite materials were prepared on a nickel foam substrate by a successive ionic layer adsorption and reaction method (SILAR). Following composition with reduced graphene oxide (rGO) and multiwall carbon nanotubes (MWCNTs), the as-obtained MnO2, MnO2/rGO and MnO2/rGO-MWCNT materials exhibited pore size distributions of 2–8 nm, 5–15 nm and 2–75 nm, respectively. For the MnO2/rGO-MWCNT material in particular, the addition of MWCNT and rGO enhanced the superb distribution of micropores, mesopores and macropores and greatly improved the electrochemical performance. The as-obtained MnO2/rGO-MWCNT/NF electrode showed a specific capacitance that reached as high as 416 F·g−1 at 1 A·g−1 in 1 M Na2SO4 aqueous electrolyte and also an excellent rate capability and high cycling stability, with a capacitance retention of 85.6% after 10,000 cycles. Electrochemical impedance spectroscopy (EIS) analyses showed a low resistance charge transfer resistance for the as-prepared MnO2/rGO-MWCNT/NF nanostructures. Therefore, MnO2/rGO-MWCNT/NF composites were successfully synthesized and displayed enhanced electrochemical performance as potential electrode materials for supercapacitors.

scholarly journals Facilely Synthesized NiCo2O4/NiCo2O4 Nanofile Arrays Supported on Nickel Foam by a Hydrothermal Method and Their Excellent Performance for High-Rate Supercapacitance

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1308 ◽  
Author(s):  
Anil Yedluri ◽  
Eswar Araveeti ◽  
Hee-Je Kim
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Nickel Foam ◽  
Rate Capability ◽  
Charge Transfer Resistance ◽  
High Rate ◽  
Transfer Resistance ◽  
Electrons And Ions ◽  
Binary Metal Oxides ◽  
Hydrothermal Approach

NiCo2O4 nanoleaf arrays (NCO NLAs) and NiCo2O4/NiCO2O4 nanofile arrays (NCO/NCO NFAs) material was fabricated on flexible nickel foam (NF) using a facile hydrothermal approach. The electrochemical performance, including the specific capacitance, charge/discharge cycles, and lifecycle of the material after the hydrothermal treatment, was assessed. The morphological and structural behaviors of the NF@NCO NLAs and NF@NCO/NCO NFAs electrodes were analyzed using a range of analysis techniques. The as-obtained nanocomposite of the NF@NCO/NCO NFAs material delivered outstanding electrochemical performance, including an ultrahigh specific capacitance (Cs) of 2312 F g−1 at a current density of 2 mA cm−2, along with excellent cycling stability (98.7% capacitance retention after 5000 cycles at 5 mA cm−2). These values were higher than those of NF@NCO NLAs (Cs of 1950 F g−1 and 96.3% retention). The enhanced specific capacitance was attributed to the large electrochemical surface area, which allows for higher electrical conductivity and rapid transport between the electrons and ions as well as a much lower charge-transfer resistance and superior rate capability. These results clearly show that a combination of two types of binary metal oxides could be favorable for improving electrochemical performance and is expected to play a major role in the future development of nanofile-like composites (NF@NCO/NCO NFAs) for supercapacitor applications.

scholarly journals Improved Electrochemical Performance of 0.5Li2MnO3·0.5LiNi0.5Mn0.5O2 Cathode Materials for Lithium Ion Batteries Synthesized by Ionic-Liquid-Assisted Hydrothermal Method

2020 ◽  
Vol 8 ◽  
Author(s):  
Yanhong Xiang ◽  
Youliang Jiang ◽  
Saiqiu Liu ◽  
Jianhua Wu ◽  
Zhixiong Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Ionic Liquid ◽  
Electrochemical Performance ◽  
Hydrothermal Method ◽  
Cathode Materials ◽  
Electrochemical Impedance ◽  
Rate Capability ◽  
Lithium Ion ◽  
Charge Transfer Resistance ◽  
Transfer Resistance

Well-dispersed Li-rich Mn-based 0.5Li2MnO3·0.5LiNi0.5Mn0.5O2 nanoparticles with diameter ranging from 50 to 100 nm are synthesized by a hydrothermal method in the presence of N-hexyl pyridinium tetrafluoroborate ionic liquid ([HPy][BF4]). The microstructures and electrochemical performance of the prepared cathode materials are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and electrochemical measurements. The XRD results show that the sample prepared by ionic-liquid-assisted hydrothermal method exhibits a typical Li-rich Mn-based pure phase and lower cation mixing. SEM and TEM images indicate that the extent of particle agglomeration of the ionic-liquid-assisted sample is lower compared to the traditional hydrothermal sample. Electrochemical test results indicate that the materials synthesized by ionic-liquid-assisted hydrothermal method exhibit better rate capability and cyclability. Besides, electrochemical impedance spectroscopy (EIS) results suggest that the charge transfer resistance of 0.5Li2MnO3· 0.5LiNi0.5Mn0.5O2 synthesized by ionic-liquid-assisted hydrothermal method is much lower, which enhances the reaction kinetics.

Graphene-Wrapped FeOOH Nanorods with Enhanced Performance as Lithium-Ion Battery Anode

NANO ◽  
2020 ◽  
pp. 2150005
Author(s):  
Meng Sun ◽  
Zhipeng Cui ◽  
Huanqing Liu ◽  
Sijie Li ◽  
Qingye Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Electrode Materials ◽  
Electronic Conductivity ◽  
Rate Capability ◽  
Lithium Ion ◽  
Extraction Process ◽  
Hybrid Structure ◽  
Charge Transfer Resistance ◽  
Transfer Resistance ◽  
Distinctive Structure

FeOOH nanorods (NRs) wrapped by reduced graphene oxide (rGO) were fabricated using a facile solvothermal method. When used as anode materials for lithium-ion batteries (LIBs), the FeOOH NRs/rGO composites show a higher capacity (490[Formula: see text]mAh g[Formula: see text] after 100 cycles at a current density of 100[Formula: see text]mA g[Formula: see text] and better rate capability than pure FeOOH NRs. The enhanced electrochemical performance can be ascribed to the hybrid structure of FeOOH and rGO. On one hand, the introduction of rGO can improve electronic conductivity and reduce charge-transfer resistance for electrode materials. On the other hand, the distinctive structure (FeOOH NRs surrounded by flexible rGO) can effectively buffer large volume change during the Li[Formula: see text] insertion/extraction process. Our work provides a feasible strategy to obtain high-performance LIBs.

scholarly journals Electrochemical Characterization of CVD-Grown Graphene for Designing Electrode/Biomolecule Interfaces

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 241
Author(s):  
Keishu Miki ◽  
Takeshi Watanabe ◽  
Shinji Koh
Keyword(s):  
Electrochemical Properties ◽  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Chemical Vapor ◽  
Charge Transfer Resistance ◽  
Monolayer Graphene ◽  
Transfer Resistance ◽  
Graphene Electrode ◽  
Before And After ◽  
Modified Graphene

In research on enzyme-based biofuel cells, covalent or noncovalent molecular modifications of carbon-based electrode materials are generally used as a method for immobilizing enzymes and/or mediators. However, the influence of these molecular modifications on the electrochemical properties of electrode materials has not been clarified. In this study, we present the electrochemical properties of chemical vapor deposition (CVD)-grown monolayer graphene electrodes before and after molecular modification. The electrochemical properties of graphene electrodes were evaluated by cyclic voltammetry and electrochemical impedance measurements. A covalently modified graphene electrode showed an approximately 25-fold higher charge transfer resistance than before modification. In comparison, the electrochemical properties of a noncovalently modified graphene electrode were not degraded by the modification.

Enhanced Electrochemical Performances of LiFePO4/C Cathode Materials by Deposited with Ge Film

2014 ◽  
Vol 936 ◽  
pp. 480-485
Author(s):  
Yan Dan Huang ◽  
Ying Bin Lin ◽  
Zhi Gao Huang
Keyword(s):  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Active Material ◽  
Rate Capability ◽  
Film Surface ◽  
Charge Transfer Resistance ◽  
Electrochemical Performances ◽  
Cyclic Voltammograms ◽  
Transfer Resistance ◽  
Surface Modified

LiFePO4/C-Ge electrodes were prepared with vacuum thermal evaporation deposition by depositing Ge films on as-prepared LiFePO4/C electrodes. The effect of Ge film on the electrochemical performances of LiFePO4/C cells was investigated systematically by charge/discharge testing, cyclic voltammograms and AC impedance spectroscopy, respectively. It was found that Ge-film-surface modified LiFePO4/C showed excellent electrochemical performances compared to that of the pristine one in terms of cyclability and rate capability. At 60°C, LiFePO4/C-Ge film exhibited outstanding cyclability with less than 5% capacity fade after 50 cycles while the pristine one suffers 15%. Analysis from the electrochemical measurements showed that the presence of Ge film on the LiFePO4/C electrode would protect active material from HF generated by the decomposition of LiPF6 in the electrolyte and stabilize the surface structure of active material during the charge and discharge cycle. Electrochemical impedance spectroscopy (EIS) results indicated that Ge film mainly reduced the charge transfer resistance Rct of LiFePO4/C electrode, resulting from the suppression of the solid electrolyte interfacial (SEI) film.

Facile Synthesis of Polypyrrole Nanofibers/Co-MOF Composite and Its Lithium Storage Properties

2020 ◽  
Vol 12 (4) ◽  
pp. 486-491
Author(s):  
Jinlei Wang ◽  
Na Cao ◽  
Huiling Du ◽  
Xian Du ◽  
Hai Lu ◽  
...  
Keyword(s):  
Electrode Materials ◽  
Rate Capability ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Cycling Performance ◽  
Charge Transfer Resistance ◽  
Growth Strategy ◽  
Composite Electrodes ◽  
Lithium Storage ◽  
Transfer Resistance

Metal-organic frameworks (MOFs) have recently emerged as promising electrode materials for lithium-ion batteries (LIBs). However, poor electrical conductivity in most MOFs limits their electrochemical performance. In this work, the integration of flaky cobalt 1,4-benzenedicarboxylate (Co-BDC) MOF with conductive polypyrrole (PPy) nanofibers via in-situ growth strategy was explored for developing novel anode materials for LIBs. Electrochemical studies showed that PPy/Co-BDC composites exhibited enhanced cycling performance (a reversible capacity of ca. 364 mA h g–1 at a current density of 50 mA g–1 after 100 cycles) and rate capability, com- pared with the pristine Co-BDC. The well dispersion of Co-BDC on polypyrrole nanofibers and the decrease in charge-transfer resistance of the composite electrodes accounted for the improvement of electrochemical properties.

Effect of Plating Solutions on Supercapacitor Characteristics of MnO2 Films

2010 ◽  
Vol 113-116 ◽  
pp. 1810-1813
Author(s):  
Fang Xiao ◽  
You Long Xu
Keyword(s):  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Equivalent Circuit Model ◽  
Active Surface ◽  
Charge Transfer Resistance ◽  
Electrochemical Impedance Spectrum ◽  
Active Surface Area ◽  
Cyclic Voltammograms ◽  
Supercapacitor Electrode ◽  
Transfer Resistance

MnO2 films were electrodeposited on the Ti substrates by galvanostatic method in various plating solutions, which was MnCl2, Mn(NO3)2, MnSO4 and Mn(CH3COO)2 solutions, respectively. On X-ray diffraction test, Crystal structures of all MnO2 films were associated to α-MnO2 of tetragonal crystal system. Scanning electron microscopy results show that morphologies of MnO2 films were clearly different. Among them, MnO2 film prepared in Mn(CH3COO)2 solution presented a lot of cracks and holes. According to electrochemical impedance spectrum analysis, this MnO2 film presents the lowest charge-transfer resistance. Additionally, electrochemical active surface areas of MnO2 films were calculated on the basis of equivalent circuit model for impedance data. The result was found that MnO2 film prepared in Mn(CH3COO)2 solution showed the biggest electrochemical active surface area, which was about 382 cm2. Cyclic voltammograms were carried out for all the samples. MnO2 film formed in Mn(CH3COO)2 solution showed the highest special capacitance of 230 F g-1. The results suggest that Mn(CH3COO)2 solution is suitable for electrodepositing MnO2 film using supercapacitor electrode materials.

Preparation and Electrochemical Performance of Mg2 + Doped Li4Ti5O12 Anode Materials for Lithium-Ion Batteries

2019 ◽  
Vol 960 ◽  
pp. 238-243
Author(s):  
Ming Wang ◽  
Xue Ming Zhang ◽  
Ying Bo Wang ◽  
Li Li Cheng ◽  
Xue Lei Wang ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Electrochemical Impedance ◽  
Solid Phase ◽  
Retention Rate ◽  
Specific Capacity ◽  
Lithium Ion ◽  
Charge Transfer Resistance ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
Transfer Resistance

Spinel Li4Ti5O12 (LTO) doped with Mg2+ was synthesized by solid-phase reaction method. The Mg2+ doping quantity was 3%, 6%, 9%, and 12%, respectively. The structure and electrochemical performance of the prepared LTO composites were investigated by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), and galvanostatic charge-discharge tests. It was found that the doped Mg ion did not change the structure of Li4Ti5O12, and it was evenly distributed around Li4Ti5O12. When Mg2+ doping quantity increased from 3% to 12%, the internal resistance and charge transfer resistance of the composite both decreased. The first discharge specific capacity of 6%-Mg2+ doped LTO composite was 168 mAh/g, which was close to the theoretical capacity of pure lithium titanate (175 mAh/g), and the capacity retention rate was 98% after 100 cycles.

Preparation and electrochemical characterization of PANI/MnCo2O4 nanocomposite as supercapacitor electrode material

2018 ◽  
Vol 96 (5) ◽  
pp. 477-483 ◽  
Author(s):  
Saeid Panahi ◽  
Moosa Es’haghi
Keyword(s):  
Specific Capacitance ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
Rate Capability ◽  
Cycling Performance ◽  
Charge Transfer Resistance ◽  
X Ray Diffraction ◽  
Supercapacitor Electrode ◽  
Transfer Resistance

In this work, PANI/MnCo2O4 nanocomposite was prepared via in-situ chemical polymerization method. Materials synthesized were characterized by FTIR spectroscopy, X-ray diffraction, and scanning electron spectroscopy. In addition, surface characterization of samples such as specific surface area, pore volume, and pore size distribution was studied. Supercapacitor capability of materials was investigated in 1 mol L–1 Na2SO4 solution using cyclic voltammetry in different potential scan rates and electrochemical impedance spectroscopy (EIS). The specific capacitance of materials was calculated, and it was observed that the specific capacitance of PANI/MnCo2O4 nanocomposite was 185 F g−1, much larger than PANI. Moreover, the prepared nanocomposite exhibited better rate capability in scan rate of 100 mV s−1 with respect to PANI. The EIS experiments revealed that the nanocomposite has lower charge transfer resistance compared with pure PANI. Subsequently, it was shown that the nanocomposite cycling performance was superior to the PANI cycling performance.

Electrochemical Performances of Yttrium Doped Li3V2–XYX(PO4)3/C Cathode Material for Lithium Secondary Battery

2015 ◽  
Vol 15 (10) ◽  
pp. 8042-8047 ◽  
Author(s):  
Minchan Jeong ◽  
Hyun-Soo Kim ◽  
Dong-Sik Bae ◽  
Chang-Woo Lee ◽  
Bong-Soo Jin
Keyword(s):  
Electrochemical Impedance ◽  
Rate Capability ◽  
Cycling Performance ◽  
Charge Transfer Resistance ◽  
Electrochemical Performances ◽  
X Ray Diffraction ◽  
Lithium Secondary Battery ◽  
Capacity Retention ◽  
Solid State Method ◽  
Transfer Resistance

In this study, the Li3V2–X YX(PO4)3 compounds have been synthesized by a simple solid state method. In addition, a polyurethane was added to apply carbon coating on the surface of the Li3V2–X YX(PO4)3 particles for enhancement of the electrical conductivity. The crystal structure and morphology of the synthesized Li3V2–XYX(PO4)3/C (LVYP/C) was investigated using an X-ray diffraction (XRD) and a scanning electron microscopy (SEM) systematically. The electrochemical performance of synthesized material, such as the initial capacity, rate capability, cycling performance and EIS was evaluated. The sizes of synthesized particle ranged from 1 to 5 μm. The Li3V2–XYX(PO4)3/C (X = 0.02) delivered the initial discharge capacity of 171.5 mAh · g–1 at 0.1C rate. It showed a capacity retention ratio of 73.0% at 1.0C after 100th cycle. The electrochemical impedance spectroscopies (EIS) results revealed that the charge transfer resistance of the material decreases by Y doping.

Sign in / Sign up

Export Citation Format

Share Document