scholarly journals Towards Higher Electric Conductivity and Wider Phase Stability Range via Nanostructured Glass-Ceramics Processing

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1321
Author(s):  
Tomasz K. Pietrzak ◽  
Marek Wasiucionek ◽  
Jerzy E. Garbarczyk
Keyword(s):  
Glass Ceramic ◽  
Electronic Conductivity ◽  
Glass Ceramics ◽  
Temperature Stability ◽  
Ceramic Materials ◽  
Glassy Matrix ◽  
Oxide Glasses ◽  
Thermal Transitions ◽  
Stability Range ◽  
Conductivity Enhancement

This review article presents recent studies on nanostructured glass-ceramic materials with substantially improved electrical (ionic or electronic) conductivity or with an extended temperature stability range of highly conducting high-temperature crystalline phases. Such materials were synthesized by the thermal nanocrystallization of selected electrically conducting oxide glasses. Various nanostructured systems have been described, including glass-ceramics based on ion conductive glasses (silver iodate and bismuth oxide ones) and electronic conductive glasses (vanadate-phosphate and olivine-like ones). Most systems under consideration have been studied with the practical aim of using them as electrode or solid electrolyte materials for rechargeable Li-ion, Na-ion, all-solid batteries, or solid oxide fuel cells. It has been shown that the conductivity enhancement of glass-ceramics is closely correlated with their dual microstructure, consisting of nanocrystallites (5–100 nm) confined in the glassy matrix. The disordered interfacial regions in those materials form “easy conduction” paths. It has also been shown that the glassy matrices may be a suitable environment for phases, which in bulk form are stable at high temperatures, and may exist when confined in nanograins embedded in the glassy matrix even at room temperature. Many complementary experimental techniques probing the electrical conductivity, long- and short-range structure, microstructure at the nanometer scale, or thermal transitions have been used to characterize the glass-ceramic systems under consideration. Their results have helped to explain the correlations between the microstructure and the properties of these systems.

Glass ceramic materials of the SiO2-CaO-MgO-Al2O3 system: Structural characterization and fluorine effect

2012 ◽  
Vol 1485 ◽  
pp. 47-52
Author(s):  
Mitzué Garza-García ◽  
Jorge López-Cuevas ◽  
Oscar Hernández-Ibarra
Keyword(s):  
Glass Ceramic ◽  
Glass Structure ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Nucleating Agent ◽  
Glassy Matrix ◽  
X Ray Diffraction ◽  
Structural Applications ◽  
Main Crystalline Phase ◽  
Corrosive Environments

ABSTRACTGlass-Ceramic monoliths of the SiO2-CaO-MgO-Al2O3 system are obtained in this research. Due to its potential dual role as a flux and as a nucleating agent, two CaF2 levels (X = 3 and X = 6 mol.%) are investigated in the parent glass composition. Due to its good mechanical properties, we intend to obtain Diopside-type pyroxene [(Ca)(Mg,Al)(Al,Si)2O6] as the main crystalline phase in the synthesized glass-ceramics. Vickers microhardness (HV), density and type of crystallization are determined in the latter materials. The morphology and size of the Diopside crystals, as well as the crystallized fraction, are determined with the help of Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). Both materials exhibit surface crystallization with Diopside-type pyroxene phase with acicular morphology homogeneously distributed in the glassy matrix. The specimen with the least amount of added fluorine shows the highest microhardness value, as well as the largest and thickest acicular crystals of Diopside-type pyroxene, the lowest apparent density and the largest crystallized fraction. Our results indicate that CaF2 added in the amounts used by us does not act as nucleating agent, but it does affect the growth of the acicular crystals of the Diopside-type pyroxene phase. This is attributed mainly to the effect of fluorine on the glass structure and properties. The materials developed in this study may be considered as viable alternatives for applications in abrasive and corrosive environments, as well as for substrates for metallic coatings, and for abrasion-resistant floor tiles and other structural applications.

scholarly journals Preparation of basalt-based glass ceramics

2003 ◽  
Vol 68 (6) ◽  
pp. 505-510 ◽  
Author(s):  
Branko Matovic ◽  
Snezana Boskovic ◽  
Mihovil Logar
Keyword(s):  
Optical Microscopy ◽  
Phase Analysis ◽  
Glass Ceramic ◽  
Glassy Phase ◽  
Raw Materials ◽  
Glass Ceramics ◽  
High Strength ◽  
Ceramic Materials ◽  
X Ray ◽  
Glass Ceramic Materials

Local and conventional raw materials?massive basalt from the Vrelo locality on Kopaonik mountain?have been used as starting materials to test their suitability for the production of glass-ceramics. Crystallization phenomena of glasses of the fused basalt rocks were studied by X-ray phase analysis optical microscopy and other techniques. Various heat treatments were used and their influences, on controlling the microstructures and properties of the products were studied with the aim of developing high strength glass-ceramic materials. Diopside CaMg(SiO3)2 and hypersthene ((Mg,Fe)SiO3) were identifies as the crystalline phases. The final products contained considerable amounts of a glassy phase. The crystalline size was in range of 8?480 ?m with plate or needle shape. Microhardness, crashing strength and wears resistence of the glass-ceramics ranged from 6.5?7.5, from 2000?6300 kg/cm2 and from 0.1?0.2 g/cm, respectively.

scholarly journals Utilization of discarded foundry sand (DFS) and inorganic waste from cellulose and paper industry for the manufacture of glass-ceramic materials

Cerâmica ◽  
2020 ◽  
Vol 66 (380) ◽  
pp. 413-420
Author(s):  
L. M. S. e Silva ◽  
R. S. Magalhães ◽  
W. C. Macedo ◽  
G. T. A. Santos ◽  
A. E. S. Albas ◽  
...  
Keyword(s):  
Glass Ceramic ◽  
Raw Materials ◽  
Paper Industry ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Gravimetric Analysis ◽  
Scanning Calorimetry ◽  
Foundry Sand ◽  
X Ray ◽  
Glass Ceramic Materials

Abstract Recycling has been pointed out as an alternative to the disposal of waste materials in industrial landfills. In the present study, the transformation of residues (discarded foundry sand - DFS, grits, and lime mud) in glass-ceramic materials is shown. The glasses were obtained by the melting/cooling method. The precursor materials, glasses, and glass-ceramics were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), and differential scanning calorimetry/thermal gravimetric analysis (DSC/TGA). The glassy materials were milled, pelleted, and thermally treated at the crystallization temperatures given by DSC data to obtain the glass-ceramics (885, 961, and 1090 ºC). The main formed phases were cristobalite, α-wollastonite (parawollastonite), and β-wollastonite (pseudowollastonite). The glass-ceramics showed very low water absorption and apparent porosity (0.26 to 0.88 wt% and 0.66 to 1.77 vol%, respectively). The results confirmed that the studied residues can be used as raw materials for the manufacture of vitreous and glass-ceramic materials.

Glass–ceramic dielectric materials with high energy density and ultra-fast discharge speed for high power energy storage applications

2019 ◽  
Vol 7 (48) ◽  
pp. 15118-15135 ◽  
Author(s):  
Shaohui Liu ◽  
Bo Shen ◽  
Haoshan Hao ◽  
Jiwei Zhai
Keyword(s):  
Energy Storage ◽  
Glass Ceramic ◽  
Temperature Stability ◽  
Ceramic Materials ◽  
Dielectric Materials ◽  
High Energy ◽  
High Energy Density ◽  
High Temperature Stability ◽  
Environmental Friendliness ◽  
Fast Discharge

Ferroelectric glass–ceramic materials have been widely used as dielectric materials for energy storage capacitors because of their ultrafast discharge speed, excellent high temperature stability, stable frequency, and environmental friendliness.

scholarly journals Effect of Thermocycling, Surface Treatments and Microstructure on the Optical Properties and Roughness of CAD-CAM and Heat-Pressed Glass Ceramics

Materials ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 381 ◽  
Author(s):  
Roxana-Diana Vasiliu ◽  
Sorin Daniel Porojan ◽  
Mihaela Ionela Bîrdeanu ◽  
Liliana Porojan
Keyword(s):  
Surface Roughness ◽  
Optical Properties ◽  
Glass Ceramic ◽  
Glass Ceramics ◽  
Lithium Disilicate ◽  
Ceramic Materials ◽  
Surface Treatments ◽  
Lithium Silicate ◽  
Before And After ◽  
Cad Cam

Dental ceramic restorations are widely spread nowadays due to their aesthetics and biocompatibility. In time, the colour and structure of these ceramic materials can be altered by aging processes. How does artificial aging affect the optical and surface roughness of ceramics? This study aims to assess the effect of thermocycling, surface treatments and microstructure upon translucency, opalescence and surface roughness on CAD-CAM and heat-pressed glass-ceramic. Forty-eight samples (1.5 mm thickness) were fabricated from six types of A2 MT ceramic: heat-pressed and milled glass-ceramic (feldspathic, lithium disilicate and zirconia reinforced lithium silicate). The samples were obtained respecting the manufacturer’s instructions. The resulted surfaces (n = 96) were half glazed and half polished. The samples were subjected to thermocycling (10,000 cycles) and roughness values (Ra and Rz), colour coordinates (L*, a*, b*) and microstructural analyses were assessed before and after thermocycling. Translucency (TP) and opalescence (OP) were calculated. Values were statistically analysed using ANOVA test (one way). TP and OP values were significantly different between heat-pressed and milled ceramics before and also after thermocycling (p < 0.001). Surface treatments (glazing and polishing) had a significant effect on TP and OP and surface roughness (p < 0.05). The heat-pressed and milled zirconia reinforced lithium silicate glass-ceramic experienced a loss in TP and OP. Ra and Rz increased for the glazed samples, TP and OP decreased for all the samples after thermocycling. Microstructural analyse revealed that glazed surfaces were more affected by the thermocycling and especially for the zirconia reinforced lithium silicate ceramic. Optical properties and surface roughness of the chosen ceramic materials were affected by thermocycling, surface treatments and microstructural differences. The least affected of the ceramics was the lithium disilicate ceramic heat-pressed polished and glazed.

Fabrication of Bioactive Glass-Ceramics by Selective Laser Sintering

2006 ◽  
Vol 309-311 ◽  
pp. 289-292
Author(s):  
Ruth D. Goodridge ◽  
Chikara Ohtsuki ◽  
Masanobu Kamitakahara ◽  
David J. Wood ◽  
Kenny W. Dalgarno
Keyword(s):  
Glass Ceramic ◽  
Selective Laser Sintering ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Laser Sintering ◽  
Layer Manufacturing ◽  
Custom Made ◽  
Good Potential

The feasibility of processing glass-ceramics using the layer manufacturing technique, selective laser sintering (SLS), to produce parts with suitable biological and mechanical properties for use in bone replacement applications, has been investigated. Glass-ceramics derived from glasses based on several different systems have been considered. Initial experiments using an apatite-mullite glass-ceramic (4.5SiO2⋅3Al203⋅1.6P2O5⋅3CaO⋅2CaF2) demonstrated the ability to process glass-ceramic materials using this technique, creating parts with a strength similar to that of cancellous bone, and a porous structure that was shown in vivo to be suitable for the ingrowth of bone. Concerns over the inability of the apatite-mullite material to form an apatite layer on its surface when soaked in a simulated body fluid (SBF) has led to the development of Al2O3-free glasses based on the systems (50-x)CaO⋅45SiO2⋅5P2O5⋅xCaF2 and (48-x)CaO⋅45SiO2⋅5P2O5⋅2CaF2⋅xNa2O. These materials have demonstrated good in vitro bioactivity, and therefore have good potential as candidates for processing by an indirect SLS method for the production of custom-made bone implants.

Crystallization and Mechanical Properties of Glass-Ceramic from Silicon Slag

2014 ◽  
Vol 953-954 ◽  
pp. 1643-1648
Author(s):  
Hang Li ◽  
Li Qiang Liu ◽  
Min Jing ◽  
Zhi Gang Wang ◽  
Zheng Wang ◽  
...  
Keyword(s):  
Glass Ceramic ◽  
Mechanical Performance ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Micro Hardness ◽  
X Ray Diffraction ◽  
Talcum Powder ◽  
X Ray ◽  
Glass Ceramic Materials ◽  
Spherical Grains

The glass-ceramic materials were produced from silicon slag with the addition of talcum powder and TiO2 by melting them in an electrically heated furnace and subsequent heat treatment at various temperatures and time. The microstructure and crystallization behaviors of glass–ceramics have been investigated by differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). With the increase of silicon slag content, the sequent precipitate phase is: krinovite Na (Mg1.9Fe0.1)Cr (SiO)3O, pseudobrookite Fe2TiO5 and anorthite Ca (Al2Si2O8), enstatite ferroan MgFeSi2O6, and albite Na (AlSi3O8). The shape of crystals was spherical grains. The glass–ceramic sample obtained from 70% silicon slag had the excellent mechanical performance including flexural strength of 200.45 MPa and Vickers micro hardness of 909.72 MPa.

scholarly journals Dielectric Properties of La2O3 Doped Composite (PbxSr1−x)TiO3 Borosilicate Glass Ceramic

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
C. R. Gautam ◽  
Devendra Kumar ◽  
Om Parkash ◽  
O. P. Thakur
Keyword(s):  
Dielectric Constant ◽  
Glass Ceramic ◽  
Perovskite Phase ◽  
Glass Ceramics ◽  
Dielectric Behavior ◽  
Effective Dielectric Constant ◽  
Glassy Matrix ◽  
Crystal Glass ◽  
Treatment Schedule ◽  
Ceramic Samples

Ferroelectric (PbxSr1−x)TiO3 (PST) perovskite phase has been crystallized in borosilicate glassy matrix with a suitable choice of composition and heat treatment schedule. La2O3 is a donor dopant for PST and can make it semiconducting. Dispersion of semiconducting perovskite phase in insulating glassy matrix in glass-ceramic samples may lead to the formation of space charge polarization around crystal-glass interface, leading to a high value of effective dielectric constant, εr. Therefore, with the aim of the developing glass ceramics with high dielectric constant, glasses in the system 64[(PbxSr1−x)O·TiO2]-25[2SiO2·B2O3]-5[K2O]-5[BaO]-1[La2O3] have been prepared (0.5≤x≤1). It is found that the addition of La2O3 strongly affected the crystallization and dielectric behavior of glass-ceramic with PST perovskite phase. All glass ceramic samples show a diffuse broad Curie peak in their εr versus T plots. Curie peak temperature, Tc, depends on compositions of the glass-ceramic samples as well as frequency of measurements.

scholarly journals Preparation and properties of Li2O-BaO-Al2O3-SiO2 glass-ceramic materials

2014 ◽  
Vol 8 (4) ◽  
pp. 203-210 ◽  
Author(s):  
Gamal Khater ◽  
Maher Idris
Keyword(s):  
Solid Solution ◽  
Water Absorption ◽  
Glass Ceramic ◽  
Density Measurement ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Optical Microscope ◽  
X Ray Diffraction ◽  
Crystalline Materials ◽  
Glass Ceramic Materials

The crystallization of some glasses, based on celsian-spodumene glass-ceramics, was investigated by different techniques including differential thermal analysis, optical microscope, X-ray diffraction, indentation, microhardness, bending strengths, water absorption and density measurement. The batches were melted and then cast into glasses, which were subjected to heat treatment to induce controlled crystallization. The resulting crystalline materials were mainly composed of ?-eucryptite solid solution, ?-spodumene solid solution, hexacelsian and monoclinic celsian, exhibiting fine grains and uniform texture. It has been found that an increasing content of celsian phase in the glasses results in increased bulk crystallization. The obtained glass-ceramic materials are characterized by high values of hardness ranging between 953 and 1013 kg/mm2, zero water absorption and bending strengths values ranging between 88 and 126MPa, which makes them suitable for many applications under aggressive mechanical conditions.

Transformation toughening of glass ceramics

1987 ◽  
Vol 2 (6) ◽  
pp. 801-804 ◽  
Author(s):  
D. R. Clarke ◽  
B. Schwartz
Keyword(s):  
Glass Ceramic ◽  
Tetragonal Zirconia ◽  
Glass Ceramics ◽  
Ceramic Materials ◽  
Nucleation Event ◽  
Transformation Toughening ◽  
Glass Ceramic Materials ◽  
Polycrystalline Ceramic ◽  
Cordierite Glass ◽  
Processing Techniques

The utilization of transformation toughening has hitherto been restricted to increasing the fracture resistance of polycrystalline ceramic materials. Although a number of investigators have attempted to extend the concept to toughening glasses and glass ceramics with tetragonal zirconia, no successful reports have been published. It is argued that the approaches employed are inevitably limited primarily because they do not take into account the necessity of nucleating the tetragonal-to-monoclinic transformation away from the crack tip itself. By concentrating on the nucleation event and using standard ceramic processing techniques, it has been demonstated that transformation toughening can be used to increase the toughness of glass-ceramic materials, and this approach is illustrated by increasing the fracture toughness of a cordierite glass ceramic.

Sign in / Sign up

Export Citation Format

Share Document