scholarly journals Biodegradable 3D Printed Scaffolds of Modified Poly (Trimethylene Carbonate) Composite Materials with Poly (L-Lactic Acid) and Hydroxyapatite for Bone Regeneration

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3215
Author(s):  
Honglei Kang ◽  
Xudong Jiang ◽  
Zhiwei Liu ◽  
Fan Liu ◽  
Guoping Yan ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Composite Materials ◽  
Polymeric Materials ◽  
Bone Cell ◽  
Cell Multiplication ◽  
X Rays ◽  
Trimethylene Carbonate ◽  
Scanning Calorimetry

Biodegradable scaffolds based on biomedical polymeric materials have attracted wide interest in bone transplantation for clinical treatment for bone defects without a second operation. The composite materials of poly(trimethylene carbonate), poly(L-lactic acid), and hydroxyapatite (PTMC/PLA/HA and PTMC/HA) were prepared by the modification and blending of PTMC with PLA and HA, respectively. The PTMC/PLA/HA and PTMC/HA scaffolds were further prepared by additive manufacturing using the biological 3D printing method using the PTMC/PLA/HA and PTMC/HA composite materials, respectively. These scaffolds were also characterized by Fourier transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), automatic contact-angle, scanning electronic micrographs (SEM), diffraction of X-rays (XRD), differential scanning calorimetry (DSC), and thermogravimetry (TG). Subsequently, their properties, such as mechanical, biodegradation, cell cytotoxicity, cell compatibility in vitro, and proliferation/differentiation assay in vivo, were also investigated. Experiment results indicated that PTMC/PLA/HA and PTMC/HA scaffolds possessed low toxicity, good biodegradability, and good biocompatibility and then enhanced the cell multiplication ability of osteoblast cells (MC3T3-E1). Moreover, PTMC/PLA/HA and PTMC/HA scaffolds enhanced the adhesion and proliferation of MC3T3-E1 cells and enabled the bone cell proliferation and induction of bone tissue formation. Therefore, these composite materials can be used as potential biomaterials for bone repatriation and tissue engineering.

scholarly journals Biodegradable 3D Printed Scaffolds of Modified Poly(trimethylene carbonate) Composite Materials with Poly(L-lactic acid) and Hydroxyapatite for Bone Regeneration

2021 ◽  
Author(s):  
Honglei Kang ◽  
Jiangxu Dong ◽  
Zhi Wei Liu ◽  
Shengmin Zhang ◽  
Fan Liu ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Composite Materials ◽  
Bone Regeneration ◽  
Bone Cells ◽  
Polymeric Materials ◽  
Host Cells ◽  
Bone Tissue Regeneration ◽  
Trimethylene Carbonate ◽  
Biodegradable Scaffolds

The biodegradable scaffolds based on biomedical polymeric materials have attracted the wide interest in bone transplantation for clinical treatment to bone defects without the second operation. The composite materials of poly(trimethylene carbonate), poly(L-lactic acid) and hydroxyapatite (PTMC/PLA/HA) were prepared by the modification and blending of poly(trimethylene carbonate) (PTMC) with poly(L-lactic acid) (PLA) and hydroxyapatite nanoparticles (HA). The PTMC/PLA/HA scaffolds were further prepared by additive manufacturing using the biological 3D printing method. The PTMC/PLA/HA composite materials and scaffolds were also characterized by fourier transform infrared spectroscopy (FT-IR), GPC, automatic contact-angle, SEM, XRD, differential scanning calorimetry (DSC) and thermogravimetry (TG). Subsequently, their properties, such as the mechanic, biodegradation, drug controlled release, cell cytotoxicity, cell compatibility in vitro and proliferation/differentiation assay in vivo, were also investigated. Experiment results indicated that PTMC/PLA/HA scaffolds possessed the low toxicity, good biodegradability and good biocompatibility and then improved the cell proliferation of osteoblast cells (MC3T3-E1). Moreover, PTMC/PLA/HA enhanced the adhesion and proliferation of MC3T3-E1 cells, allowing penetration of host cells within the construct boundaries, and then can enable the growing of bone cells and induction of bone tissue regeneration. Therefore, PTMC/PLA/HA composite materials can be used as the potential biodegradable scaffolds for bone regeneration and tissue engineering in vivo.

scholarly journals In Vitro and In Vivo Biosafety Analysis of Resorbable Polyglycolic Acid-Polylactic Acid Block Copolymer Composites for Spinal Fixation

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 29
Author(s):  
Seung Kyun Yoon ◽  
Jin Ho Yang ◽  
Hyun Tae Lim ◽  
Young-Wook Chang ◽  
Muhammad Ayyoob ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Animal Experiments ◽  
Polymeric Materials ◽  
Polyglycolic Acid ◽  
Poly Lactic Acid ◽  
Skin Sensitization ◽  
Spinal Fixation ◽  
In Vivo Degradation

Herein, spinal fixation implants were constructed using degradable polymeric materials such as PGA–PLA block copolymers (poly(glycolic acid-b-lactic acid)). These materials were reinforced by blending with HA-g-PLA (hydroxyapatite-graft-poly lactic acid) and PGA fiber before being tested to confirm its biocompatibility via in vitro (MTT assay) and in vivo animal experiments (i.e., skin sensitization, intradermal intracutaneous reaction, and in vivo degradation tests). Every specimen exhibited suitable biocompatibility and biodegradability for use as resorbable spinal fixation materials.

scholarly journals Biocompatible Materials Based on Plasticized Poly(lactic acid), Chitosan and Rosemary Ethanolic Extract I. Effect of Chitosan on the Properties of Plasticized Poly(lactic acid) Materials

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 941 ◽  
Author(s):  
Cornelia Vasile ◽  
Elena Stoleru ◽  
Raluca Nicoleta Darie-Niţa ◽  
Raluca Petronela Dumitriu ◽  
Daniela Pamfil ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Food Packaging ◽  
Polymeric Materials ◽  
Poly Lactic Acid ◽  
Rosemary Extract ◽  
Antioxidant Compounds ◽  
Innovative Drug ◽  
Melt Mixing

The purpose of the present study is to develop new multifunctional environmentally friendly materials having applications both in medical and food packaging fields. New poly(lactic acid) (PLA)-based multifunctional materials containing additives derived from natural resources like chitosan (CS) and rosemary extract (R) were obtained by melt mixing. Each of the selected components has its own specific properties such as: PLA is a biodegradable thermoplastic aliphatic polyester derived from renewable biomass, heat-resistant, with mechanical properties close to those of polystyrene and polyethylene terephthalate, and CS offers good antimicrobial activity and biological functions, while R significantly improves antioxidative action necessary in all applications. A synergy of their combination, an optimum choice of their ratio, and processing parameters led to high performance antimicrobial/antioxidant/biocompatible/environmentally degradable materials. The polyethylene glycol (PEG)-plasticized PLA/chitosan/powdered rosemary extract biocomposites of various compositions were characterized in respect to their mechanical and rheological properties, structure by spectroscopy, antioxidant and antimicrobial activities, and in vitro and in vivo biocompatibility. Scanning electron microscopy images evidence the morphology features added by rosemary powder presence in polymeric materials. Incorporation of additives improved elongation at break, antibacterial and antioxidant activity and also biocompatibility. Migration of bioactive components into D1 simulant is slower for PEG-plasticized PLA containing 6 wt % chitosan and 0.5 wt % rosemary extract (PLA/PEG/6CS/0.5 R) biocomposite and it occurred by a diffusion-controlled mechanism. The biocomposites show high hydrophilicity and good in vitro and in vivo biocompatibility. No hematological, biochemical and immunological modifications are induced by subcutaneous implantation of biocomposites. All characteristics of the PEG-plasticized PLA-based biocomposites recommend them as valuable materials for biomedical implants, and as well as for the design of innovative drug delivery systems. Also, the developed biocomposites could be a potential nature-derived active packaging with controlled release of antimicrobial/antioxidant compounds.

Development of a membrane of poly (L-co-D,L lactic acid-co-trimethylene carbonate) with aloe vera: An alternative biomaterial designed to improve skin healing

2017 ◽  
Vol 32 (3) ◽  
pp. 311-320 ◽  
Author(s):  
Daniel Komatsu ◽  
Daniel V Mistura ◽  
Adriana Motta ◽  
Juliana A Domingues ◽  
Moema A Hausen ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Healing Process ◽  
Aloe Vera ◽  
Life Quality ◽  
Tensile Tests ◽  
Sem Analysis ◽  
Mitochondrial Activity ◽  
Trimethylene Carbonate

The search for new therapies and drugs that act as topical agents to relieve pain and control the infectious processes in burns always attracted interest in clinical trials. As an alternative to synthetic drugs, the use of natural extracts is useful in the development of new strategies and formulations for improving the life quality. The aim of this study was to develop a wound dressing using Poly(L-co-D,L lactic acid-co-TMC) (PLDLA-co-TMC) containing aloe vera (AV). This natural plant extract is known for its modulatory effects under healing process. The membrane of PLDLA-co-TMC+aloe vera was prepared at different concentrations of AV (5, 10, 15 and 50%). The FTIR showed no change in the PLDLA-co-TMC spectrum after AV addition, while the swelling test showed changes only in PLDLA-co-TMC+AV at 50%. The wettability measurements showed decrease in the contact angle in all samples after the AV addition in the polymer, while the AV release test showed that PLDLA-co-TMC+50%AV sample has higher AV release rate than the sample with other AV concentrations. The SEM analysis showed that AV was homogeneously distributed at 5% only. Tensile tests demonstrated an increase in the Young's modulus and a reduction in the elongation till rupture of the PLDLA-co-TMC after the addition of AV. Biocompatibility in vitro evaluation with fibroblast cells seeded in the membranes of PLDLA-co-TMC+AV showed that the cells were able to adhere, proliferate and maintain mitochondrial activity in all AV concentrations tested. Due to the known skin medicinal properties attributed to AV and the results here obtained, we suggest that after in vivo trials, the PLDLA-co-TMC+AV should be a promising biomaterial for application as a device for skin curative and healing agent.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Mannose Conjugated Starch Nanoparticles for Preferential Targeting of Liver Cancer

2020 ◽  
Vol 17 ◽  
Author(s):  
Akhlesh Kumar Jain ◽  
Hitesh Sahu ◽  
Keerti Mishra ◽  
Suresh Thareja
Keyword(s):  
Side Effects ◽  
Liver Cancer ◽  
Entrapment Efficiency ◽  
Xrd Analysis ◽  
In Vitro Cytotoxicity ◽  
Physical Interaction ◽  
Scanning Calorimetry ◽  
Starch Nanoparticles

Aim: To design D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for site specific delivery. Background: Liver cancer is the third leading cause of death in world and fifth most often diagnosed cancer is the major global threat to public health. Treatment of liver cancer with conventional method bears several side effects, thus to undertake these side effects as a formulation challenge, it is necessary to develop novel target specific drug delivery system for the effective and better localization of drug into the proximity of target with restricting the movement of drug in normal tissues. Objective: To optimize and characterize the developed D-Mannose conjugated 5-Fluorouracil (5-FU) loaded Jackfruit seed starch nanoparticles (JFSSNPs) for effective treatment of liver cancer. Materials and methods: 5-FU loaded JFSSNPs were prepared and optimized formulation had higher encapsulation efficiency were conjugated with D-Mannose. These formulations were characterized for size, morphology, zeta potential, X-Ray Diffraction, and Differential Scanning Calorimetry. Potential of NPs were studied using in vitro cytotoxicity assay, in vivo kinetic studies and bio-distribution studies. Result and discussion: 5-Fluorouracil loaded NPs had particle size between 336 to 802nm with drug entrapment efficiency was between 64.2 to 82.3%. In XRD analysis, 5-FU peak was diminished in the diffractogram, which could be attributed to the successful incorporation of drug in amorphous form. DSC study suggests there was no physical interaction between 5- FU and Polymer. NPs showed sustained in vitro 5-FU release up to 2 hours. In vivo, mannose conjugated NPs prolonged the plasma level of 5-FU and assist selective accumulation of 5-FU in the liver (vs other organs spleen, kidney, lungs and heart) compared to unconjugated one and plain drug. Conclusion: In vivo, bio-distribution and plasma profile studies resulted in significantly higher concentration of 5- Fluorouracil liver suggesting that these carriers are efficient, viable, and targeted carrier of 5-FU treatment of liver cancer.

scholarly journals Radiosensitization of Prostate Cancers In Vitro and In Vivo to Erbium-filtered Orthovoltage X-rays Using Actively Targeted Gold Nanoparticles

2017 ◽  
Vol 7 (1) ◽  
Author(s):  
Allison M. Khoo ◽  
Sang Hyun Cho ◽  
Francisco J. Reynoso ◽  
Maureen Aliru ◽  
Kathryn Aziz ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
X Rays ◽  
Prostate Cancers

scholarly journals Optimization of X-ray Investigations in Dentistry Using Optical Coherence Tomography

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4554
Author(s):  
Ralph-Alexandru Erdelyi ◽  
Virgil-Florin Duma ◽  
Cosmin Sinescu ◽  
George Mihai Dobre ◽  
Adrian Bradu ◽  
...  
Keyword(s):  
Optical Coherence Tomography ◽  
Radiation Dose ◽  
Imaging Techniques ◽  
Image Resolution ◽  
Optical Coherence ◽  
X Rays ◽  
High Quality ◽  
X Ray

The most common imaging technique for dental diagnoses and treatment monitoring is X-ray imaging, which evolved from the first intraoral radiographs to high-quality three-dimensional (3D) Cone Beam Computed Tomography (CBCT). Other imaging techniques have shown potential, such as Optical Coherence Tomography (OCT). We have recently reported on the boundaries of these two types of techniques, regarding. the dental fields where each one is more appropriate or where they should be both used. The aim of the present study is to explore the unique capabilities of the OCT technique to optimize X-ray units imaging (i.e., in terms of image resolution, radiation dose, or contrast). Two types of commercially available and widely used X-ray units are considered. To adjust their parameters, a protocol is developed to employ OCT images of dental conditions that are documented on high (i.e., less than 10 μm) resolution OCT images (both B-scans/cross sections and 3D reconstructions) but are hardly identified on the 200 to 75 μm resolution panoramic or CBCT radiographs. The optimized calibration of the X-ray unit includes choosing appropriate values for the anode voltage and current intensity of the X-ray tube, as well as the patient’s positioning, in order to reach the highest possible X-rays resolution at a radiation dose that is safe for the patient. The optimization protocol is developed in vitro on OCT images of extracted teeth and is further applied in vivo for each type of dental investigation. Optimized radiographic results are compared with un-optimized previously performed radiographs. Also, we show that OCT can permit a rigorous comparison between two (types of) X-ray units. In conclusion, high-quality dental images are possible using low radiation doses if an optimized protocol, developed using OCT, is applied for each type of dental investigation. Also, there are situations when the X-ray technology has drawbacks for dental diagnosis or treatment assessment. In such situations, OCT proves capable to provide qualitative images.

scholarly journals The impact of indole-3-lactic acid on immature intestinal innate immunity and development: a transcriptomic analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Wuyang Huang ◽  
Ky Young Cho ◽  
Di Meng ◽  
W. Allan Walker
Keyword(s):  
Lactic Acid ◽  
Mechanistic Model ◽  
Transcriptomic Analysis ◽  
Dependent Manner ◽  
Protective Effects ◽  
Very Preterm Infants ◽  
Anti Inflammatory ◽  
The Impact

AbstractAn excessive intestinal inflammatory response may have a role in the pathogenesis of necrotizing enterocolitis (NEC) in very preterm infants. Indole-3-lactic acid (ILA) of breastmilk tryptophan was identified as the anti-inflammatory metabolite involved in probiotic conditioned media from Bifidobacteria longum subsp infantis. This study aimed to explore the molecular endocytic pathways involved in the protective ILA effect against inflammation. H4 cells, Caco-2 cells, C57BL/6 pup and adult mice were used to compare the anti-inflammatory mechanisms between immature and mature enterocytes in vitro and in vivo. The results show that ILA has pleiotropic protective effects on immature enterocytes including anti-inflammatory, anti-viral, and developmental regulatory potentials in a region-dependent and an age-dependent manner. Quantitative transcriptomic analysis revealed a new mechanistic model in which STAT1 pathways play an important role in IL-1β-induced inflammation and ILA has a regulatory effect on STAT1 pathways. These studies were validated by real-time RT-qPCR and STAT1 inhibitor experiments. Different protective reactions of ILA between immature and mature enterocytes indicated that ILA’s effects are developmentally regulated. These findings may be helpful in preventing NEC for premature infants.

Sign in / Sign up

Export Citation Format

Share Document