scholarly journals A Novel Antibacterial Titanium Modification with a Sustained Release of Pac-525

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3306
Author(s):  
Yuzhu He ◽  
Yuanyuan Li ◽  
Enjun Zuo ◽  
Songling Chai ◽  
Xiang Ren ◽  
...  
Keyword(s):  
Sustained Release ◽  
Titanium Surface ◽  
Pure Titanium ◽  
Gram Negative Bacteria ◽  
Biomimetic Mineralization ◽  
Flat Rate ◽  
Bioactive Coating ◽  
Gram Positive Bacteria ◽  
Release Assay

For the benefit of antibacterial Ti on orthopedic and dental implants, a bioactive coating (Pac@PLGA MS/HA coated Ti) was deposited on the surface of pure titanium (Ti), which included two layers: an acid–alkali heat pretreated biomimetic mineralization layer and an electrosprayed Poly (D,L-lactide-co- glycolic acid) (PLGA) microsphere layer as a sustained-release system. Hydroxyapatite (HA) in mineralization layer was primarily prepared on the Ti followed by the antibacterial coating of Pac-525 loaded by PLGA microspheres. After observing the antimicrobial peptides distributed uniformly on the titanium surface, the release assay showed that the release of Pac-525 from Pac@PLGA MS/HA coated Ti provided a large initial burst followed by a slow release at a flat rate. Pac@PLGA MS/HA coated Ti exhibited a strong cytotoxicity to both Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). In addition, Pac@PLGA MS/HA coated Ti did not affect the growth and adhesion of the osteoblast-like cell line, MC3T3-E1. These data suggested that a bionic mineralized composite coating with long-term antimicrobial activity was successfully prepared.

scholarly journals Reality of Dental Implant Surface Modification: A Short Literature Review

2014 ◽  
Vol 8 (1) ◽  
pp. 114-119 ◽  
Author(s):  
In-Sung Yeo
Keyword(s):  
Calcium Phosphate ◽  
Titanium Surface ◽  
Pure Titanium ◽  
Acid Etching ◽  
Commercially Pure Titanium ◽  
Fluoride Treatment ◽  
Commercially Pure ◽  
Modified Surfaces

Screw-shaped endosseous implants that have a turned surface of commercially pure titanium have a disadvantage of requiring a long time for osseointegration while those implants have shown long-term clinical success in single and multiple restorations. Titanium implant surfaces have been modified in various ways to improve biocompatibility and accelerate osseointegration, which results in a shorter edentulous period for a patient. This article reviewed some important modified titanium surfaces, exploring the in vitro, in vivo and clinical results that numerous comparison studies reported. Several methods are widely used to modify the topography or chemistry of titanium surface, including blasting, acid etching, anodic oxidation, fluoride treatment, and calcium phosphate coating. Such modified surfaces demonstrate faster and stronger osseointegration than the turned commercially pure titanium surface. However, there have been many studies finding no significant differences in in vivo bone responses among the modified surfaces. Considering those in vivo results, physical properties like roughening by sandblasting and acid etching may be major contributors to favorable bone response in biological environments over chemical properties obtained from various modifications including fluoride treatment and calcium phosphate application. Recently, hydrophilic properties added to the roughened surfaces or some osteogenic peptides coated on the surfaces have shown higher biocompatibility and have induced faster osseointegration, compared to the existing modified surfaces. However, the long-term clinical studies about those innovative surfaces are still lacking.

Different Activities of Osteoblast and Bacteria on a Nanostructured Titanium Surface for Dental Implant

2012 ◽  
Vol 586 ◽  
pp. 39-44 ◽  
Author(s):  
Yan Hua Zheng ◽  
Jin Bo Li ◽  
Xuan Yong Liu ◽  
Jiao Sun
Keyword(s):  
Dental Implant ◽  
Titanium Surface ◽  
Clinical Success ◽  
Pure Titanium ◽  
Clinical Success Rate ◽  
Antimicrobial Effect ◽  
Antibacterial Activities ◽  
Nanostructured Titanium ◽  
Good Antibacterial Activity

Insufficience of osteogenesis and antimicrobial effect have been still impacted the long term clinical success rate of dental implants. A nanostructured titanium surface prepared by hydrothermal treatment with H2O2 was evaluated on its osteoblastic viability and antibacterial effect. Samples were divided into 2 groups: untreated pure titanium surface (Ti) and a nanostructured titanium surface (NT). The antibacterial activities against S.mutans and C.albicans were measured by film applicator coating assay, as well as the live/dead bacteria stain. The osteoblastic viability was investigated by SEM and MTT assay. Results showed that the active microbia on NT was reduced at 24h (P<0.05) significantly according to the live/dead bacteria stain and film applicator coating assay, which could also enhance the osteoblast viability. Therefore, a nanostructured titanium surface exhibits good antibacterial activity on S.mutans and C.albicans, and promoting osteoblast viability, which will be a potential kind of dental implant material.

Rapid demonstration of septic or infectious arthritis due to Gram-negative bacteria

1992 ◽  
Vol 50 (1) ◽  
pp. 686-687
Author(s):  
Jacob S. Hanker ◽  
Paul R. Gross ◽  
Beverly L. Giammara
Keyword(s):  
Chronic Arthritis ◽  
Blood Cultures ◽  
Gram Negative Bacteria ◽  
Infectious Arthritis ◽  
Bacterial Arthritis ◽  
Gram Positive ◽  
Gram Negative ◽  
Gram Positive Bacteria

Blood cultures are positive in approximately only 50 per cent of the patients with nongonococcal bacterial infectious arthritis and about 20 per cent of those with gonococcal arthritis. But the concept that gram-negative bacteria could be involved even in chronic arthritis is well-supported. Gram stains are more definitive in staphylococcal arthritis caused by gram-positive bacteria than in bacterial arthritis due to gram-negative bacteria. In the latter situation where gram-negative bacilli are the problem, Gram stains are helpful for 50% of the patients; they are only helpful for 25% of the patients, however, where gram-negative gonococci are the problem. In arthritis due to gram-positive Staphylococci. Gramstained smears are positive for 75% of the patients.

Antibacterial activity of magnesium oxide nanoparticles prepared by Calcination method

2019 ◽  
Vol 10 (03) ◽  
Author(s):  
Elaf Ayad Kadhem ◽  
Miaad Hamzah Zghair ◽  
Sarah , Hussam H. Tizkam, Shoeb Alahmad Salih Mahdi ◽  
Hussam H. Tizkam ◽  
Shoeb Alahmad
Keyword(s):  
Antibacterial Activity ◽  
Magnesium Oxide ◽  
Diffusion Method ◽  
Oxide Nanoparticles ◽  
Gram Negative Bacteria ◽  
Gram Positive ◽  
Gram Negative ◽  
Gram Positive Bacteria ◽  
Magnesium Oxide Nanoparticles ◽  
Agar Disc

magnesium oxide nanoparticles (MgO NPs) were prepared by simple wet chemical method using different calcination temperatures. The prepared NPs were characterized by Electrostatic Discharge (ESD), Scanning Electron Microscope (SEM) and X-ray Diffraction (XRD). It demonstrates sharp intensive peak with the increase of crystallinty and increase of the size with varying morphologies with respect to increase of calcination temperature. Antibacterial studies were done on gram negative bacteria (E.coli) and gram positive bacteria (S.aureus) by agar disc diffusion method. The zones of inhibitions were found larger for gram positive bacteria than gram negative bacteria, this mean, antibacterial MgO NPs activity more active on gram positive bacteria than gram negative bacteria because of the structural differences. It was found that antibacterial activity of MgO NPs was found it has directly proportional with their concentration.

Synthesis, Spectral and Antimicrobial Investigation of 2-(Naphthalenel-ylamino)-2- Phenylacetonitrile and 1, 10-Phenanthroline with Five Divalent Transition Metal Ions

2019 ◽  
Vol 10 (01) ◽  
Author(s):  
Mohammed Al-Amery1 ◽  
Ashraf Saad Rasheed ◽  
Dina A. Najeeb
Keyword(s):  
Transition Metal ◽  
Metal Ions ◽  
Transition Metal Ions ◽  
Molar Conductance ◽  
Octahedral Geometry ◽  
Mixed Ligand ◽  
Gram Negative Bacteria ◽  
Magnetic Studies ◽  
Gram Positive Bacteria

Five new mixed ligand metal complexes have been synthesized by the reaction of divalent transition metal ions (Hg, Ni, Zn, Cu and Cd) with 2-(naphthalen-l-ylamino)-2-phenylacetonitrile (L1 ) and 1,10-phenanthroline (L2). The coordination likelihood of the two ligands toward metal ions has been suggested in the light of elemental analysis, UV-Vis spectra, FTIR, 1H-NMR, flam atomic absorption, molar conductance and magnetic studies. Results data suggest that the octahedral geometry for all the prepared complexes. Antibacterial examination of synthesized complexes in vitro was performed against four bacterias. Firstly, Gram-negative bacteria namely, Pseudomonas aerugin and Escherichia. Secondly, Gram-positive bacteria namely, Bacillus subtilis, Staphylococcuaurouss. Results data exhibit that the synthesized complexes exhibited more biological activity than tetracycline pharmaceutical.

BAKTERI PADA KARANG SCLERACTINIA DI KAWASAN PERAIRAN BUNAKEN, MOROTAI DAN RAJA AMPAT

2020 ◽  
Vol 8 (1) ◽  
pp. 122
Author(s):  
Eghbert Eghbert Elvan Eghbert Elvan Ampou ◽  
Iis Iis Triyulianti ◽  
Nuryani Widagti ◽  
Suciadi Catur Nugroho ◽  
Yuli Pancawati
Keyword(s):  
Scleractinian Coral ◽  
Gram Negative Bacteria ◽  
Hard Coral ◽  
Field Sampling ◽  
Bacterial Isolation ◽  
Gram Positive ◽  
Coral Mucus ◽  
Gram Negative ◽  
Gram Positive Bacteria

Research on hard coral (Scleractinian coral) contaminated with bacteria is still not much done, especially in Indonesian waters. This study took samples of coral mucus in 2010 at 3 (three) different locations, namely Bunaken (May); Morotai (September) and Raja Ampat (November), which focused on the analysis of Research on hard coral (Scleractinian coral) contaminated with bacteria is still not much done, especially in Indonesian waters. This study took samples of coral mucus in 2010 at 3 (three) different locations, namely Bunaken (May); Morotai (September) and Raja Ampat (November), which focused on the analysis of gram-positive and gram-negative bacteria. The method used for field sampling is time swim, which is by diving at a depth of 5-10 meters for ± 30 minutes and randomly taking samples of coral mucus using siring or by taking directly on corals (reef branching). Mucus samples were analyzed by bacterial isolation in the laboratory. The result shows that there were differences between gram-positive and gram-negative bacteria in the three research sites and that gram-positive bacteria were higher or dominant. Further research that can identify the bacteria species and explain its relationship to the ecosystem is highly recommended.Keywords: Bacteria, Scleractinian coral, gram-positive and -negative, Bunaken, Morotai, Raja Ampat  AbstrakPenelitian tentang karang keras (Scleractinian coral) yang terkontaminasi bakteri masih belum banyak dilakukan, terutama di perairan Indonesia. Penelitian ini mengambil sampel mucus karang pada tahun 2010 di 3 (tiga) lokasi berbeda, yakni Bunaken (Mei); Morotai (September) dan Raja Ampat (November), yang difokuskan pada analisis bakteri gram postif dan gram negatif. Metode yang digunakan untuk pengambilan sampel di lapangan adalah time swim, yaitu dengan penyelaman pada kedalaman 5-10 meter selama ±30 menit dan mengambil sampel mucus karang secara acak menggunakan siring atau dengan mengambil langsung pada karang (fraksi cabang). Sampel mucus dianalisis dengan cara isolasi bakteri di laboratorium. Hasil analisis menunjukkan bahwa ada perbedaan antara bakteri gram positif dan gram negative di tiga lokasi survei dan bakteri gram positif lebih tinggi atau dominan. Penelitian lebih lanjut yang dapat menentukan jenis bakteri serta menjelaskan hubungannya dengan ekosistem sangat disarankan untuk dilakukan.Kata Kunci : Bakteri, Scleractinian coral, gram positif dan negatif, Bunaken, Morotai, Raja Ampat

A Review of the Characteristics, Properties and Methods for Quantification of Roxithromycin

2020 ◽  
Vol 16 ◽  
Author(s):  
Marcus Vinicius Martins Rubatino ◽  
Ana Laura Araújo Santos ◽  
Rayssa Araújo dos Santos ◽  
Magali Benjamim de Araújo
Keyword(s):  
Analytical Methods ◽  
Environmental Samples ◽  
Biological Fluids ◽  
Pharmaceutical Preparations ◽  
Gram Negative Bacteria ◽  
Analytical Technique ◽  
Detection Systems ◽  
Gram Positive Bacteria ◽  
Microbiological Characteristics ◽  
Biological And Environmental Samples

: Roxithromycin is one of the most frequently used macrolide antibiotics, a safe group of antimicrobials that acts against Gram-positive bacteria and some Gram-negative bacteria. It is sold in several countries in different dosage forms (tablets and capsules) and strengths (50, 100, 150 and 300 mg). Several analytical methods have been described to quantify roxithromycin in different matrices, such as biological and environmental samples and food. Identifying the main characteristics of the drugs and selecting appropriate analytical methods for their quantification are of paramount importance for understanding the behavior of drugs, metabolites and impurities. This review presents the physicalchemical and microbiological characteristics, properties as well as methods for quantification of roxithromycin in biological fluids, pharmaceutical preparations, food and environmental samples. HPLC coupled to various detection systems is the most used analytical technique to determine roxithromycin in these matrices. Although many analytical methods have been reported for the analysis of this drug, it is very important to include in this context a prospective view, in order to implement new analytical technologies for the quality control of this antimicrobial that contribute to the preservation of economic and environmental impacts.

scholarly journals Surface Immobilization of Nano-Silver on Polymeric Medical Devices to Prevent Bacterial Biofilm Formation

Pathogens ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 93 ◽  
Author(s):  
Riau ◽  
Aung ◽  
Setiawan ◽  
Yang ◽  
Yam ◽  
...  
Keyword(s):  
Medical Devices ◽  
Biofilm Formation ◽  
Culture Media ◽  
Silver Ions ◽  
Bacterial Biofilm ◽  
Surface Immobilization ◽  
Nano Silver ◽  
Gram Positive Bacteria ◽  
Tissue Microenvironment

: Bacterial biofilm on medical devices is difficult to eradicate. Many have capitalized the anti-infective capability of silver ions (Ag+) by incorporating nano-silver (nAg) in a biodegradable coating, which is then laid on polymeric medical devices. However, such coating can be subjected to premature dissolution, particularly in harsh diseased tissue microenvironment, leading to rapid nAg clearance. It stands to reason that impregnating nAg directly onto the device, at the surface, is a more ideal solution. We tested this concept for a corneal prosthesis by immobilizing nAg and nano-hydroxyapatite (nHAp) on poly(methyl methacrylate), and tested its biocompatibility with human stromal cells and antimicrobial performance against biofilm-forming pathogens, Pseudomonas aeruginosa and Staphylococcus aureus. Three different dual-functionalized substrates—high Ag (referred to as 75:25 HAp:Ag); intermediate Ag (95:5 HAp:Ag); and low Ag (99:1 HAp:Ag) were studied. The 75:25 HAp:Ag was effective in inhibiting biofilm formation, but was cytotoxic. The 95:5 HAp:Ag showed the best selectivity among the three substrates; it prevented biofilm formation of both pathogens and had excellent biocompatibility. The coating was also effective in eliminating non-adherent bacteria in the culture media. However, a 28-day incubation in artificial tear fluid revealed a ~40% reduction in Ag+ release, compared to freshly-coated substrates. The reduction affected the inhibition of S. aureus growth, but not the P. aeruginosa. Our findings suggest that Ag+ released from surface-immobilized nAg diminishes over time and becomes less effective in suppressing biofilm formation of Gram-positive bacteria, such as S. aureus. This advocates the coating, more as a protection against perioperative and early postoperative infections, and less as a long-term preventive solution.

scholarly journals N-Doped Carbon Quantum Dots as Fluorescent Bioimaging Agents

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 789
Author(s):  
Shih-Fu Ou ◽  
Ya-Yun Zheng ◽  
Sin-Jen Lee ◽  
Shyi-Tien Chen ◽  
Chien-Hui Wu ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Carbon Nanomaterials ◽  
Graphene Quantum Dots ◽  
Carbon Quantum Dots ◽  
Gram Negative Bacteria ◽  
Gram Positive ◽  
Gram Negative ◽  
Gram Positive Bacteria ◽  
Fluorescence Characteristics ◽  
And Staphylococcus Aureus

Graphene quantum dots, carbon nanomaterials with excellent fluorescence characteristics, are advantageous for use in biological systems owing to their small size, non-toxicity, and biocompatibility. We used the hydrothermal method to prepare functional N-doped carbon quantum dots (N-CQDs) from 1,3,6-trinitropyrene and analyzed their ability to fluorescently stain various bacteria. Our results showed that N-CQDs stain the cell septa and membrane of the Gram-negative bacteria Escherichia coli, Salmonellaenteritidis, and Vibrio parahaemolyticus and the Gram-positive bacteria Bacillus subtilis, Listeria monocytogenes, and Staphylococcus aureus. The optimal concentration of N-CQDs was approximately 500 ppm for Gram-negative bacteria and 1000 ppm for Gram-positive bacteria, and the exposure times varied with bacteria. N-Doped carbon quantum dots have better light stability and higher photobleaching resistance than the commercially available FM4-64. When excited at two different wavelengths, N-CQDs can emit light of both red and green wavelengths, making them ideal for bioimaging. They can also specifically stain Gram-positive and Gram-negative bacterial cell membranes. We developed an inexpensive, relatively easy, and bio-friendly method to synthesize an N-CQD composite. Additionally, they can serve as a universal bacterial membrane-staining dye, with better photobleaching resistance than commercial dyes.

Sign in / Sign up

Export Citation Format

Share Document