scholarly journals High-Performance Transmission of Surface Plasmons in Graphene-Covered Nanowire Pairs with Substrate

Nanomaterials ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1594 ◽  
Author(s):  
Da Teng ◽  
Kai Wang ◽  
Qiongsha Huan ◽  
Yongzhe Zhao ◽  
Yanan Tang
Keyword(s):  
Surface Plasmons ◽  
High Performance ◽  
Infrared Range ◽  
Support Surface ◽  
Propagation Length ◽  
Promising Alternative ◽  
Silica Substrate ◽  
Nanophotonic Devices ◽  
Substrate Layer ◽  
Potential Applications

Graphene was recently proposed as a promising alternative to support surface plasmons with superior performances in the mid-infrared range. Here, we theoretically show that high-performance and low-loss transmission of graphene plasmons can be achieved by adding a silica substrate to the graphene-covered nanowire pairs. The effect of the substrate layer on mode properties has been intensively investigated by using the finite element method. Furthermore, the results show that inserting a low index material layer between the nanowire and substrate could compensate for the loss accompanied by the substrate, thus the mode properties could be adjusted to fulfill better performance. A reasonable propagation length of 15 μm and an ultra-small normalized mode area about ~10−4 could be obtained at 30 THz. The introduction of the substrate layer is crucial for practical fabrication, which provides additional freedom to tune the mode properties. The graphene-covered nanowire pairs with an extra substrate may inspire potential applications in tunable integrated nanophotonic devices.

scholarly journals Graphene-Coated Elliptical Nanowires for Low Loss Subwavelength Terahertz Transmission

2019 ◽  
Vol 9 (11) ◽  
pp. 2351 ◽  
Author(s):  
Da Teng ◽  
Kai Wang ◽  
Zhe Li ◽  
Yongzhe Zhao ◽  
Gao Zhao ◽  
...  
Keyword(s):  
Chemical Potential ◽  
Infrared Range ◽  
Support Surface ◽  
Low Loss ◽  
Propagation Length ◽  
Promising Alternative ◽  
Mid Infrared ◽  
Terahertz Transmission ◽  
Mode Area ◽  
Thz Waves

Graphene has been recently proposed as a promising alternative to support surface plasmons with its superior performances in terahertz and mid-infrared range. Here, we propose a graphene-coated elliptical nanowire (GCENW) structure for subwavelength terahertz waveguiding. The mode properties and their dependence on frequency, nanowire size, permittivity and chemical potential of graphene are studied in detail by using a finite element method, they are also compared with the graphene-coated circular nanowires (GCCNWs). Results showed that the ratio of the long and short axes (b/a) of the elliptical nanowire had significant influence on mode properties, they also showed that a propagation length over 200 μm and a normalized mode area of approximately 10−4~10−3 could be obtained. Increasing b/a could simultaneously achieve both long propagation length and very small full width at half maximum (FWHM) of the focal spots. When b/a = 10, a pair of focal spots about 40 nm could be obtained. Results also showed that the GCENW had a better waveguiding performance when compared with the corresponding GCCNWs. The manipulation of Terahertz (THz) waves at a subwavelength scale using graphene plasmon (GP) may lead to applications in tunable THz components, imaging, and nanophotonics.

scholarly journals Infrared Plasmonic Sensing with Anisotropic Two-Dimensional Material Borophene

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1165
Author(s):  
Jingjing Zhang ◽  
Zhaojian Zhang ◽  
Xiaoxian Song ◽  
Haiting Zhang ◽  
Junbo Yang
Keyword(s):  
Surface Plasmon ◽  
High Performance ◽  
Point Of Care ◽  
Spectral Response ◽  
Localized Surface Plasmon ◽  
Support Surface ◽  
Two Dimensional ◽  
Plasmonic Sensor ◽  
Nanophotonic Devices ◽  
Sensing Performance

Borophene, a new member of the two-dimensional material family, has been found to support surface plasmon polaritons in visible and infrared regimes, which can be integrated into various optoelectronic and nanophotonic devices. To further explore the potential plasmonic applications of borophene, we propose an infrared plasmonic sensor based on the borophene ribbon array. The nanostructured borophene can support localized surface plasmon resonances, which can sense the local refractive index of the environment via spectral response. By analytical and numerical calculation, we investigate the influences of geometric as well as material parameters on the sensing performance of the proposed sensor in detail. The results show how to tune and optimize the sensitivity and figure of merit of the proposed structure and reveal that the borophene sensor possesses comparable sensing performance with conventional plasmonic sensors. This work provides the route to design a borophene plasmonic sensor with high performance and can be applied in next-generation point-of-care diagnostic devices.

Electrochemical Deposition of Polypyrrole Nanostructures for Energy Applications: A Review

2020 ◽  
Vol 16 (4) ◽  
pp. 462-477 ◽  
Author(s):  
Patrizia Bocchetta ◽  
Domenico Frattini ◽  
Miriana Tagliente ◽  
Filippo Selleri
Keyword(s):  
Lithium Batteries ◽  
High Performance ◽  
Relevant Literature ◽  
Chemical Parameters ◽  
Energy Devices ◽  
Energy Applications ◽  
Physico Chemical ◽  
Potential Applications ◽  
Template Free ◽  
Cathodic Polymerization

By collecting and analyzing relevant literature results, we demonstrate that the nanostructuring of polypyrrole (PPy) electrodes is a crucial strategy to achieve high performance and stability in energy devices such as fuel cells, lithium batteries and supercapacitors. In this critic and comprehensive review, we focus the attention on the electrochemical methods for deposition of PPy, nanostructures and potential applications, by analyzing the effect of different physico-chemical parameters, electro-oxidative conditions including template-based or template-free depositions and cathodic polymerization. Diverse interfaces and morphologies of polymer nanodeposits are also discussed.

scholarly journals Ultrafast mode-locking in highly stacked Ti3C2Tx MXenes for 1.9-μm infrared femtosecond pulsed lasers

Nanophotonics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1741-1751
Author(s):  
Young In Jhon ◽  
Jinho Lee ◽  
Young Min Jhon ◽  
Ju Han Lee
Keyword(s):  
High Performance ◽  
Density Functional ◽  
2D Materials ◽  
Density Functional Theory Calculations ◽  
Mode Locking ◽  
Infrared Range ◽  
Saturable Absorption ◽  
Pulsed Lasers ◽  
Saturable Absorbers ◽  
Layer Stacking

Abstract Metallic 2D materials can be promising saturable absorbers for ultrashort pulsed laser production in the long wavelength regime. However, preparing and manipulating their 2D structures without layer stacking have been nontrivial. Using a combined experimental and theoretical approach, we demonstrate here that a metallic titanium carbide (Ti3C2Tx), the most popular MXene 2D material, can have excellent nonlinear saturable absorption properties even in a highly stacked state due to its intrinsically existing surface termination, and thus can produce mode-locked femtosecond pulsed lasers in the 1.9-μm infrared range. Density functional theory calculations reveal that the electronic and optical properties of Ti3C2Tx MXene can be well preserved against significant layer stacking. Indeed, it is experimentally shown that 1.914-μm femtosecond pulsed lasers with a duration of 897 fs are readily generated within a fiber cavity using hundreds-of-layer stacked Ti3C2Tx MXene saturable absorbers, not only being much easier to manufacture than mono- or few-layered ones, but also offering character-conserved tightly-assembled 2D materials for advanced performance. This work strongly suggests that as-obtained highly stacked Ti3C2Tx MXenes can serve as superb material platforms for versatile nanophotonic applications, paving the way toward cost-effective, high-performance photonic devices based on MXenes.

scholarly journals Novel Bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Esteban Gonzalez-Valencia ◽  
Ignacio Del Villar ◽  
Pedro Torres
Keyword(s):  
Optical Fibers ◽  
High Performance ◽  
Light Propagation ◽  
Fiber Optic ◽  
Layer Structure ◽  
Optical Network ◽  
Building Blocks ◽  
Bloch Wave ◽  
Nanophotonic Devices ◽  
Wide Range

AbstractWith the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization.

scholarly journals Changes in Optical Properties upon Dye–Clay Interaction: Experimental Evaluation and Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 197
Author(s):  
Giorgia Giovannini ◽  
René M. Rossi ◽  
Luciano F. Boesel
Keyword(s):  
Optical Properties ◽  
Hybrid Materials ◽  
High Performance ◽  
Fluorescent Properties ◽  
Chemical Mechanisms ◽  
Strong Electrostatic Interaction ◽  
Potential Applications ◽  
Photochemical Properties ◽  
Physical And Chemical ◽  
The Relationship

The development of hybrid materials with unique optical properties has been a challenge for the creation of high-performance composites. The improved photophysical and photochemical properties observed when fluorophores interact with clay minerals, as well as the accessibility and easy handling of such natural materials, make these nanocomposites attractive for designing novel optical hybrid materials. Here, we present a method of promoting this interaction by conjugating dyes with chitosan. The fluorescent properties of conjugated dye–montmorillonite (MMT) hybrids were similar to those of free dye–MMT hybrids. Moreover, we analyzed the relationship between the changes in optical properties of the dye interacting with clay and its structure and defined the physical and chemical mechanisms that take place upon dye–MMT interactions leading to the optical changes. Conjugation to chitosan additionally ensures stable adsorption on clay nanoplatelets due to the strong electrostatic interaction between chitosan and clay. This work thus provides a method to facilitate the design of solid-state hybrid nanomaterials relevant for potential applications in bioimaging, sensing and optical purposes.

scholarly journals None sharp corner localized surface plasmons resonance based ultrathin metasurface single layer quarter wave plate

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qinyu Qian ◽  
Pengfei Liu ◽  
Li Fan ◽  
Liang Zhao ◽  
Chinhua Wang
Keyword(s):  
Surface Plasmons ◽  
Amplitude Ratio ◽  
Single Layer ◽  
Quarter Wave Plate ◽  
Localized Surface Plasmons ◽  
Sharp Corner ◽  
Wave Plate ◽  
Nanophotonic Devices ◽  
Elliptical Ring ◽  
Quarter Wave

AbstractWe report on a non-sharp-corner quarter wave plate (NCQW) within the single layer of only 8 nm thickness structured by the Ag hollow elliptical ring array, where the strong localized surface plasmons (LSP) resonances are excited. By manipulating the parameters of the hollow elliptical ring, the transmitted amplitude and phase of the two orthogonal components are well controlled. The phase difference of π/2 and amplitude ratio of 1 is realized simultaneously at the wavelength of 834 nm with the transmission of 0.46. The proposed NCQW also works well in an ultrawide wavelength band of 110 nm, which suggests an efficient way of exciting LSP resonances and designing wave plates, and provides a great potential for advanced nanophotonic devices and integrated photonic systems.

scholarly journals Preparation and Physicochemical Properties of Functionalized Silica/Octamethacryl-Silsesquioxane Hybrid Systems

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Karolina Szwarc-Rzepka ◽  
Filip Ciesielczyk ◽  
Teofil Jesionowski
Keyword(s):  
Hybrid Systems ◽  
Support Surface ◽  
Functionalized Silica ◽  
Silica Support ◽  
Chemical Immobilization ◽  
Innovative Method ◽  
Potential Applications ◽  
Oligomeric Silsesquioxane ◽  
Cp Mas Nmr ◽  
Thermal Stability Of

Alkoxysilane-grafted silica/polyhedral oligomeric silsesquioxane with methacryl substituents (SiO2/silane/POSS) hybrid material was synthesized according to hydrolyzation and condensation reactions in the so-called “bifunctionalization process.” It is a new attractive system because of its physicochemical, especially thermal and structural, properties. This innovative method of preparation as well as specific physicochemical and useful properties determine the potential applications of such products in many industries. The structure and physicochemical parameters of obtained hybrid systems were characterized using infrared spectroscopy (FTIR),13C and29Si solid-state nuclear magnetic resonance (CP MAS NMR), and thermal analysis. The mechanism of bifunctionalization reaction was proposed. The chemical immobilization of silane coupling agent and Methacryl POSS onto silica support surface was noted during the study. Those changes caused a significant increase in the hydrophobic character of fillers obtained. Moreover, changes in thermal stability of SiO2/silane/POSS hybrid systems in comparison to pure POSS modifier were also observed.

Application potential of textile reinforcement in concrete construction for infrastructure buildings: environmental performance and availability

2021 ◽  
Author(s):  
Sara Reichenbach ◽  
Benjamin Kromoser ◽  
Philipp Preinstorfer ◽  
Tobias Huber
Keyword(s):  
High Performance ◽  
Construction Material ◽  
Limit State ◽  
Carbon Dioxide Emission ◽  
Resource Consumption ◽  
Ultimate Limit State ◽  
Textile Reinforced Concrete ◽  
Potential Applications ◽  
Application Potential ◽  
Ultimate Limit

<p>With the building industry being one of the main sources of carbon dioxide emission worldwide and concrete being the main construction material, new strategies have to be developed to reduce the carbon footprint thereof. The use of high-performance materials in structural concrete, as for example textile-reinforced concrete (TRC), seems to allow for a reduction of the resource consumption and the carbon emissions. The present paper addresses potential applications of TRC examining the global warming potential (GWP) of a rail platform barrier. The resource consumption is depicted in a parametrical study in terms of the necessary component height and reinforcement area considering both the serviceability limit state (SLS) as well as the ultimate limit state (ULS). The results clearly indicate an achievable reduction of the GWP during construction when using textile reinforcement made of high-performance fibres. Furthermore, an analysis of the European market was conducted to prove the availability of this new reinforcement type. </p>

scholarly journals Palm Oil Carotenoids

1994 ◽  
Vol 15 (2) ◽  
pp. 1-8 ◽  
Author(s):  
Choo Yuen May
Keyword(s):  
Palm Oil ◽  
High Performance ◽  
Elaeis Guineensis ◽  
Provitamin A ◽  
Carotenoid Content ◽  
Crude Palm Oil ◽  
Alkyl Esters ◽  
Red Palm Oil ◽  
Potential Applications ◽  
Nutritional Effects

Crude palm oil is the richest natural plant source of carotenoids in terms of retinol (provitamin A) equivalent. This article reports on » the carotenoids found in palm oil, its fractions, byproducts, and derivatives from the Elaeis guineensis and E. oleifera palms, including their hybrids and a back-cross, as well as the carotenoids of pressed palm fibres, second-pressed oil, palm leaves, and palm-derived alkyl esters; » two novel procedures for preparing highly concentrated sources of carotenoids (>80,000 ppm), by recovery by palm alkyl esters, and by retention and concentration in deacidified and deodorized red palm oil; » the carotenoid content and profiles of the above sources obtained by high-performance liquid chromatography; and » nutritional effects of palm oil carotenoids and their potential applications for health promotion and disease prevention.

Sign in / Sign up

Export Citation Format

Share Document