scholarly journals Physiological Characteristics of Cultivated Tepary Bean (Phaseolus acutifolius A. Gray) and Its Wild Relatives Grown at High Temperature and Acid Soil Stress Conditions in the Amazon Region of Colombia

Plants ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 116
Author(s):  
Juan Carlos Suárez ◽  
Amara Tatiana Contreras ◽  
José Alexander Anzola ◽  
José Iván Vanegas ◽  
Idupulapati M. Rao
Keyword(s):  
High Temperature ◽  
Genetic Resource ◽  
Acid Soil ◽  
Stress Conditions ◽  
Photochemical Quenching ◽  
Soil Conditions ◽  
Combined Stress ◽  
Tepary Bean ◽  
Phaseolus Acutifolius ◽  
Soil Stress

Common bean (Phaseolus vulgaris L.) is sensitive to different types of abiotic stresses (drought, high temperature, low soil fertility, and acid soil), and this may limit its adaptation and consequently to its yield under stress. Because of this, a sister species, tepary bean (Phaseolus acutifolius A. Gray), has recently gained attention in breeding for improved abiotic stress tolerance in common bean. In this study, we evaluated the adaptation of 302 accessions of tepary bean (Phaseolus acutifolius A. Gray) and its wild relatives (grouped in four types of tepary bean genetic resource: cultivated, acutifolius regressive, acutifolius wild, tenuifolius wild) when grown under high temperature and acid soil conditions with aluminum toxicity in the Amazon region of Colombia. Our objective was to determine differences among four types of tepary bean genetic resource in their morpho-phenological, agronomic, and physiological responses to combined high temperature and acid soil stress conditions. We found that cultivated P. acutifolius var acutifolius presented a greater number of pods per plant, as well as larger seeds and a greater number of seeds per pod. Some traits, such as root biomass, days to flowering and physiological maturity, specific leaf area, and stomatal density, showed significant differences between types of tepary bean genetic resource, probably contributing to difference in adaptation to combined stress conditions of high temperature and acid soil conditions. The photochemical quenching (qP) was higher in cultivated P. acutifolius var. acutifolius, while energy dissipation by non-photochemical quenching (NPQ) in the form of heat and the coefficient of non-photochemical dissipation (qN) were higher in acutifolius regressive and tenuifolius wild accessions. We have identified 6 accessions of cultivated and 19 accessions of tenuifolius wild that exhibited grain yields above 1800 kg ha−1. These accessions could be suitable to use as parents to improve dry seed production of tepary bean under combined stress conditions of high temperature and acid soil.

scholarly journals Mutation breeding for heat and drought tolerance in tepary bean (Phaseolus acutifolius A. Gray)

2021 ◽  
pp. 60-68
Author(s):  
Ligia Carmenza Muñoz ◽  
Daniel G. Debouck ◽  
Mariela Rivera ◽  
Jaime E. Muñoz ◽  
Deisy Alpala ◽  
...  
Keyword(s):  
High Temperature ◽  
Drought Tolerance ◽  
Univariate Analysis ◽  
Mutation Breeding ◽  
Seed Number ◽  
Tepary Bean ◽  
Phaseolus Acutifolius ◽  
Drought Conditions ◽  
Seed Biomass ◽  
Mutant Lines

Tepary bean (Phaseolus acutifolius A. Gray) is more heat and drought tolerant than common bean (P. vulgaris L.). Four hundred mutant lines of two tepary accessions (G40068 and G40159) were generated by ethyl methane sulfonate (EMS) treatment. In preliminary studies of the M5 mutant lines under abiotic stress, three mutant lines (CMT 38, CMT 109, CMT 187) were selected from six mutated lines based on morpho-physiological traits and superior yield and advanced to the M6 generation. The M6 mutant lines were uniform and genetically stable. These mutant lines and their original (M0) parents were evaluated for heat and drought tolerance under greenhouse conditions. Their performance was evaluated for morpho-physiological attributes, seed yield and yield components. Under high temperature and drought conditions, the CMT 38 mutant (M6 line) and its original tepary (M0) accession (G40068) showed greater values of pod biomass, pod number and 100-seed biomass than the other lines tested. The CMT 109 and CMT 187 mutant lines and their G40159 original accession (M0) also showed the highest value of seed number under high temperature and drought conditions. This suggests that the previous screening performed during the population advancement of these mutant lines, based on morphological traits like growth habit, was not detrimental to the yield variables evaluated here. Under combined heat and drought conditions, different parameters could be incorporated into tepary breeding programmes, as selection criteria to screen genotypes for tolerance to heat and drought stress. These parameters included: chlorophyll (SPAD) readings, seed biomass, 100-seed biomass and seed number because they explain the observed variance in the principal component analysis. Two additional traits (root biomass and stem diameter) were also identified as useful attributes, based on univariate analysis. The mutant lines evaluated here offer potential for further improvement of tepary bean to high temperature and drought

scholarly journals Heat stress-induced changes in shoot and root characteristics of genotypes of tepary bean (Phaseolus acutifolius A. Gray), common bean (Phaseolus vulgaris L.) and their interspecific lines

2021 ◽  
pp. 51-59
Author(s):  
Ligia Carmenza Muñoz ◽  
Mariela Rivera ◽  
Jaime E. Muñoz ◽  
Fatma Sarsu ◽  
Idupulapati M. Rao
Keyword(s):  
Heat Stress ◽  
High Temperature ◽  
Stomatal Conductance ◽  
Common Bean ◽  
Photosynthetic Efficiency ◽  
Total Chlorophyll ◽  
Phaseolus Vulgaris L ◽  
Tepary Bean ◽  
Phaseolus Acutifolius ◽  
Total Chlorophyll Content

Heat stress is a major limitation to grain yield in common bean (Phaseolus vulgaris L.). Tepary bean (Phaseolus acutifolius A. Gray) is better adapted to heat stress than common bean. Ten tepary bean accessions, four common bean genotypes and four interspecific lines involving P. vulgaris and P. acutufolius, P. coccineus and P. dumosus were evaluated for tolerance to heat stress conditions induced under greenhouse conditions and these were compared to plants grown under ambient temperatures. The high temperature treatment was 29 ±5 °C during the day and was >24 °C (up to 27 °C) during the night, while the ambient temperature (AT) treatment was 25 ±5 °C during the day and 19± 2 °C at night. The genotypic differences were evaluated for morpho-physiological characteristics of shoot and root and also yield components. The Genotype and Genotype × Temperature interactions were significant for all shoot and root morpho-physiological characteristics evaluated. Higher temperature (HT) significantly affected leaf photosynthetic efficiency, total chlorophyll content, and stomatal conductance. The effect was positive or negative, depending on the genotypes. Tepary accessions showed reduced total chlorophyll content, while common bean genotypes and the interspecific lines were less affected. Tepary accessions also showed reduced stomatal conductance, but increased leaf photosynthetic efficiency under HT. Common bean genotypes increased stomatal conductance and decreased leaf photosynthetic efficiency. High temperature decreased total root length, specific root length and pod biomass compared to ambient conditions, but there was no marked effect on pollen viability of the tested genotypes. The superior adaptation of tepary germplasm accessions to high temperature is attributed to their ability to regulate stomatal opening and photosynthetic efficiency, together with a superior ability to remobilize photosynthates from older leaves to pods during physiological maturity

2004 Application of PD Method to High Temperature Crack Growth under Combined Stress Conditions

2007 ◽  
Vol 2007.1 (0) ◽  
pp. 59-60
Author(s):  
Takeshi ISOGAI ◽  
Tetsuya YAMAMOTO ◽  
Taiki KUROSAWA ◽  
Isamu MORIMOTO
Keyword(s):  
High Temperature ◽  
Crack Growth ◽  
Stress Conditions ◽  
Combined Stress ◽  
Temperature Crack

scholarly journals Pollen viability of Tepary bean (Phaseolus acutifolius A. Gray.) mutant lines under water stress conditions and inoculation with rhizobia

2018 ◽  
Vol 67 (2) ◽  
pp. 319-325 ◽  
Author(s):  
Sergio Crespo-Muñoz ◽  
Mariela Rivera-Peña ◽  
Deisy Alexandra Rosero-Alpala ◽  
Jaime Eduardo Muñoz-Florez ◽  
Idupulapati M. Rao ◽  
...  
Keyword(s):  
Water Stress ◽  
Pollen Viability ◽  
Stress Conditions ◽  
Rhizobium Tropici ◽  
Tepary Bean ◽  
Phaseolus Acutifolius ◽  
Bradyrhizobium Sp ◽  
Mutant Lines

El fríjol tépari, Phaseolus acutifolius A. Gray destaca por su tolerancia al estrés por sequía y altas temperaturas, sin embargo, presenta baja diversidad genética en sus formas cultivadas. Por lo que se inició un programa de inducción de mutaciones. El objetivo de este estudio fue establecer el efecto de diferentes parámetros  agro-morfofisiológicos asociados sobre la viabilidad y cantidad del polen en 123 líneas mutantes de la quinta generación M5 de P. acutifolius y genotipos parentales, por medio del procesamiento de microfotografías de preparaciones de polen con tinción de acetocarmin. El experimento se realizó en condiciones de invernadero y el diseño experimental fue de subparcelas divididas con 3 repeticiones; adicionalmente, los factores evaluados fueron: condiciones de humedad del suelo, inoculación con cepas de Bradyrhizobium sp. o Rhizobium tropici, y las líneas o accesiones evaluadas (6 mutantes y 2 no mutantes). El experimento fue realizado manteniendo la temperatura nocturna superior a 25°C. No hubo diferencias significativas entre los tratamientos, se encontraron correlaciones positivas de la viabilidad de polen con otras variables. 

scholarly journals Adaptation of Interspecific Mesoamerican Common Bean Lines to Acid Soils and High Temperature in the Amazon Region of Colombia

Plants ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2412
Author(s):  
Juan Carlos Suárez ◽  
Milan O. Urban ◽  
Amara Tatiana Contreras ◽  
Miguel Ángel Grajales ◽  
Cesar Cajiao ◽  
...  
Keyword(s):  
High Temperature ◽  
Common Bean ◽  
Temperature Stress ◽  
Energy Use ◽  
Acid Soil ◽  
Grain Filling ◽  
High Temperature Stress ◽  
Amazon Region ◽  
Stress Conditions ◽  
Photosynthate Partitioning

Knowledge of the physiological basis for improved genetic adaptation of common bean (Phaseolus vulgaris L.) lines to acid soils and high temperature conditions in the Amazon region of Colombia is limited. In this study, we evaluated the differences among 41 common bean lines in energy use, leaf cooling, photosynthate partitioning to pod formation and grain filling, and grain yield over two seasons under acid soil and high temperature stress in the Amazon region of Colombia. Common bean lines evaluated included medium and large seeded interspecific lines of Mesoamerican and Andean gene pools with different levels of adaptation to abiotic stress conditions and some lines are improved for iron and zinc (biofortified) concentration in seeds. We found three bean lines (GGR 147, SMG 21 and SMG 12) that were superior in their photosynthetic response, leaf cooling, photosynthate partitioning ability to pod formation and grain filling, resulting in grain yields exceeding 1900 kg ha−1 under acid soil and high temperature stress conditions. The superior photosynthetic performance was attributed to the efficient use of absorbed energy on the electron level in thylakoids, which is mainly oriented to a higher quantum yield of PSII (ΦII), lower energy dissipation in the form of heat (ΦNPQ), high linear electron flow (LEF) and high fraction of PSI centers in open state (PSIopen). We speculate that these photosynthetic and photosynthate partitioning responses of superior bean lines are part of the genetic adaptation to acidic soils and high temperature stress conditions. Among the evaluated bean lines, three lines (GGR 147, SMG 21 and SMG 12) combined the desirable attributes for genetic improvement of stress tolerance and biofortification. These lines can serve as parents to further improve traits (energy use efficiency and multiple stress resistance) that are important for bean production in the Amazon region.

scholarly journals Impacts of soil moisture level and organic matter content on growth of two Juncus species and Poa pratensis grown under acid soil conditions

Weed Research ◽  
2019 ◽  
Vol 59 (6) ◽  
pp. 490-500
Author(s):  
W Kaczmarek‐Derda ◽  
M Helgheim ◽  
J Netland ◽  
H Riley ◽  
K Wærnhus ◽  
...  
Keyword(s):  
Organic Matter ◽  
Soil Moisture ◽  
Poa Pratensis ◽  
Acid Soil ◽  
Organic Matter Content ◽  
Matter Content ◽  
Moisture Level ◽  
Soil Conditions ◽  
Soil Moisture Level

Effects of drought and high temperature stress on synthetic hexaploid wheat

2012 ◽  
Vol 39 (3) ◽  
pp. 190 ◽  
Author(s):  
Gautam P. Pradhan ◽  
P. V. Vara Prasad ◽  
Allan K. Fritz ◽  
Mary B. Kirkham ◽  
Bikram S. Gill
Keyword(s):  
High Temperature ◽  
Temperature Stress ◽  
Hexaploid Wheat ◽  
High Temperature Stress ◽  
Synthetic Hexaploid Wheat ◽  
Combined Stress ◽  
Wheat Genotypes ◽  
Synthetic Hexaploid ◽  
Effects Of Drought ◽  
Days After Anthesis

Drought and high temperature often occurs simultaneously, causing significant yield losses in wheat (Triticum aestivum L.). The objectives of this study were to: (i) quantify independent and combined effects of drought and high temperature stress on synthetic hexaploid wheat genotypes at anthesis and at 21 days after anthesis; and (ii) determine whether responses to stress varied among genotypes. Four synthetic hexaploid and two spring wheat genotypes were grown from emergence to anthesis (Experiment I) and emergence to 21 days after anthesis (Experiment II), with full irrigation and 21/15°C day/night temperature. Thereafter, four treatments were imposed for 16 days as (a) optimum condition: irrigation + 21/15°C, (b) drought stress: withhold irrigation + 21/15°C, (c) high temperature stress: irrigation + 36/30°C and (d) combined stress: withhold irrigation + 36/30°C. Results indicated a decrease in leaf chlorophyll, individual grain weight and grain yield in an increasing magnitude of drought < high temperature < combined stress. There were 69, 81 and 92% grain yield decreases in Experiment I and 26, 37 and 50% in Experiment II under drought, high temperature and combined stress respectively. Synthetic hexaploid wheat genotypes varied in their response to stresses. Genotypes ALTAR 84/AO’S’ and ALTAR 84/Aegilops tauschii Coss. (WX 193) were least affected by combined stress in Experiments I and II respectively. Overall, combined effect of drought + high temperature stress was more detrimental than the individual stress and the interaction effect was hypo-additive in nature.

The response of alfalfa genotypes to different concentrations of mobile aluminium

2021 ◽  
pp. 1-10
Author(s):  
A. Liatukienė ◽  
R. Skuodienė
Keyword(s):  
Seed Yield ◽  
Morphological Traits ◽  
Acid Soil ◽  
Screening Method ◽  
Al Toxicity ◽  
Research Centre ◽  
Soil Conditions ◽  
Tolerance Index ◽  
Stem Density ◽  
Plant Vigour

Abstract The morphological traits of alfalfa under acid soil conditions with different mobile aluminium (Al) concentrations were investigated. The study site was Vėžaičiai Branch of the Lithuanian Research Centre for Agriculture and Forestry, 55°70 N, 21°49 E. The experiment featuring the 30 most Al-tolerant alfalfa accessions (populations and cultivars), determined from laboratory trials was established on a Bathygleyic Dystric Retisol in 2018. In 2019 and 2020, the biological and morphological traits were evaluated: plant regrowth, plant height before flowering, wintering, leafiness, stem thickness, plant vigour, stem density, seed yield and resistance to spring black stem leaf spot. The resistance of alfalfa to mobile Al toxicity was determined using a filter-based screening method of selection cycles C1 and C2. The accessions grown in the soil with mobile Al (20.6–23.4 mg/kg) showed better tolerance to Al toxicity in the cycle C2. The hypocotyl tolerance index of these accessions was better at 8, 16, 32 and 64 mm AlCl3 concentrations in the cycle C2. The correlation analysis showed strong significant positive and negative relationships between the morphological traits. A cluster analysis showed that the accessions, grown in the soil with mobile Al (20.6–23.4 mg/kg) were the most resistant to Al toxicity in the cycle C2. These accessions produced a better seed yield and demonstrated lower values of morphological traits compared to cluster 2. Also, these accessions are considered as tolerant to mobile Al toxicity and might be used as donors in breeding for Al toxicity tolerance.

Sign in / Sign up

Export Citation Format

Share Document