scholarly journals Engineering Sustainable Antimicrobial Release in Silica-Cellulose Membrane with CaCO3-Aided Processing for Wound Dressing Application

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 808 ◽  
Author(s):  
Zhi Shen ◽  
Ning Cai ◽  
Yanan Xue ◽  
Vincent Chan ◽  
Bo Yu ◽  
...  
Keyword(s):  
Sustained Release ◽  
Wound Dressing ◽  
Drug Loading ◽  
Composite Membranes ◽  
Antibacterial Activities ◽  
Wound Dressings ◽  
Alkaline Condition ◽  
Vapor Permeability ◽  
Cellulose Membrane ◽  
Swelling Properties

The sustained release of antimicrobial therapeutics for wound dressing has become an attractive design strategy for prolonging the timespan of wound dressings and for reducing the risk of chronic wound infection. Recently, cellulose-based membrane has become a preferred option of wound dressings for the treatment of burn wounds and skin ulcers. In this work, novel cellulose membrane incorporated with mesoporous silica particles (SBA-15) was developed as an antimicrobial wound dressing with desirable sustained release functionality for targeting persistent bacterial pathogens. Attributed to a coated layer of calcium carbonate (CaCO3), SBA-15 particles were free from corrosion in alkaline condition during the preparation of cellulose-based composite membranes. SEM, TEM and BET results showed that the morphology, specific surface area, pore size and pore volume of pristine SBA-15 were preserved after the incorporation of CaCO3-coated SBA-15 into the cellulose matrix, while the mesoporous structure of SBA-15 was significantly disrupted without the use of CaCO3 coating. The resultant composite membranes containing 30 wt% SBA-15 (denoted as CM-Ca2-SBA(30%)) achieved 3.6 wt% of antimicrobial drug loading. Interestingly, CM-Ca2-SBA(30%) demonstrated the sustained release property of chloramphenicol for 270 h, driven by a two-stage drug release processes of SBA-15/cellulose. The water vapor permeability (WVTR) and swelling properties of composite membranes were shown to have complied with the primary requirements of wound dressing. Antibacterial assays revealed that strong antibacterial activities (144 h) of the composite membranes against Staphylococcus aureus and Eschericia coli were achieved. All results displayed that the strategy of coating silica with CaCO3 helps to obtain cellulose–silica composite membranes with desirable sustained release profiles and strong antibacterial activities. The antibacterial SBA-15/cellulose composite membranes show potential for the application of wound dressing.

scholarly journals Antioxidant, Antibacterial, Water Binding Capacity and Mechanical Behavior of Gelatin-Ferula Oil Film as a Wound Dressing Material

2015 ◽  
Vol 4 (2) ◽  
pp. 103-14
Author(s):  
Gholamreza Kavoosi ◽  
Amin Shakiba ◽  
Mahmood Ghorbani ◽  
Seyed Mohammad Mahdi Dadfar ◽  
Amin Mohammadi Purfard
Keyword(s):  
Water Vapor ◽  
Wound Dressing ◽  
Water Solubility ◽  
Water Vapor Permeability ◽  
Antibacterial Activities ◽  
Gelatin Film ◽  
Vapor Permeability ◽  
Elongation At Break ◽  
Gelatin Films ◽  
Water Swelling

Background: Development of biodegradable and biocompatible films based on protein polymer with strong antioxidant and antibacterial activities has gradually obtained extensive concern in the world. In this study, the improvement of gelatin film properties incorporated with Ferula assa-foetida essential oil (FAO) as a potential antioxidant/antibacterial wound dressing film was investigated. Materials and Methods: Gelatin films were prepared from gelatin solutions (10% w/v) containing different concentration of FAO. The effect of FAO addition on water solubility, water swelling, water vapor permeability, mechanical behavior, light barrier properties as well as antioxidant and antibacterial activities of the films were examined. Results: Water solubility, water swelling and water vapor permeability for pure gelatin films were 29 ± 1.6%, 396 ± 8%, 0.23 ± 0.018 g.mm/m2.h, respectively. Incorporation of FAO into gelatin films caused a significant decrease in swelling and increase in solubility and water vapor permeability. Tensile strength, elastic modulus and elongation at break for pure gelatin films were 4.2 ± 0.4 MPa, 5.8 ± 4.2 MPa, 128 ± 8 %, respectively. Incorporation of FAO into gelatin films caused a significant decrease in tensile strength and elastic modulus and increase in elongation at break of the films. Gelatin film showed UV-visible light absorbance ranging from 280 to 480 nm with maximum absorbance at 420 nm. Gelatin/FAO films also exhibited excellent antioxidant ad antimicrobial activities. Conclusions: Our results suggested that gelatin/FAO films could be used as active films due to their excellent antioxidant and antimicrobial features for different biomedical applications including wound-dressing materials.[GMJ.2015;4(2):103-14]

scholarly journals A Novel Bilayer Propionyl-L-carnitine Loaded Polyvinyl Alcohol/Calcium Alginate/Carboxymethyl Cellulose wound dressing for the treatment of diabetic wounds: an in vitro and in vivo study

2021 ◽  
Author(s):  
Wenjun Jiang ◽  
Zuoyao Huang ◽  
Weixiang Min ◽  
Hao Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Carboxymethyl Cellulose ◽  
Wound Dressing ◽  
Calcium Alginate ◽  
Wound Dressings ◽  
Vapor Permeability ◽  
Drying Methods ◽  
Cell Viability Assay ◽  
Diabetic Wounds

Abstract In the current study a drug delivering bilayer porous/nanofibrous wound dressing was developed using a combination of electrospinning and freeze-drying methods. The wound dressings were prepared by lyophilization of 1:1 weight ratios of calcium alginate and carboxymethyl cellulose (CMC) solutions. Drug delivering nanofibrous sheets were fabricated by electrospinning of polyvinyl alcohol (PVA) solution incorporated with 1%,3%,5%, and 10% of Propionyl-L-carnitine. The dressings were studied regarding their microstructure, swelling capacity, mechanical strength, surface wettability, water vapor permeability, drug release profile, in vitro degradation, cell viability assay, hemocompatibility, porosity measurement, microbial penetration assay, and protein adsorption assay. Based on in vitro studies, PVA sheets loaded with 5% Propionyl-L-carnitine was chosen for the preparation of wound dressings. The healing potential of the produced constructs was studied in rat model of diabetic wound. Our results showed that the drug delivering dressings demonstrated significantly higher wound closure and better histological regeneration compared to drug free constructs and sterile gauze. Our results suggest potential applicability of Propionyl-L-carnitine delivering Calcium Alginate/CMC/PVA dressing for the treatment of diabetic wounds in clinic.

scholarly journals Biodegradable and Drug-Eluting Inorganic Composites Based on Mesoporous Zinc Oxide for Urinary Stent Applications

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3821 ◽  
Author(s):  
Marco Laurenti ◽  
Marta Grochowicz ◽  
Elena Dragoni ◽  
Marco Carofiglio ◽  
Tania Limongi ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Sustained Release ◽  
Drug Loading ◽  
Antibacterial Properties ◽  
Burst Release ◽  
Hydroxyethyl Methacrylate ◽  
Swelling Properties ◽  
Additional Surgery ◽  
Hydrogel Matrix ◽  
Drug Eluting

Conventional technologies for ureteral stent fabrication suffer from major inconveniences such as the development of encrustations and bacteria biofilm formation. These drawbacks typically lead to the failure of the device, significant patient discomfort and an additional surgery to remove and replace the stent in the worst cases. This work focuses on the preparation of a new nanocomposite material able to show drug elution properties, biodegradation and eventually potential antibacterial activity. Poly(2-hydroxyethyl methacrylate) or the crosslinked poly(2-hydroxyethyl methacrylate)-co-poly(acrylic acid) hydrogels were prepared by the radical polymerization method and combined with a biodegradable and antibacterial filling agent, i.e., flower-like Zinc Oxide (ZnO) micropowders obtained via the hydrothermal route. The physico-chemical analyses revealed the correct incorporation of ZnO within the hydrogel matrix and its highly mesoporous structure and surface area, ideal for drug incorporation. Two different anti-inflammatory drugs (Ibuprofen and Diclofenac) were loaded within each composite and the release profile was monitored up to two weeks in artificial urine (AU) and even at different pH values in AU to simulate pathological conditions. The addition of mesoporous ZnO micropowders to the hydrogel did not negatively affect the drug loading properties of the hydrogel and it was successfully allowed to mitigate undesirable burst-release effects. Furthermore, the sustained release of the drugs over time was observed at neutral pH, with kinetic constants (k) as low as 0.05 h−1. By exploiting the pH-tunable swelling properties of the hydrogel, an even more sustained release was achieved in acidic and alkaline conditions especially at short release times, with a further reduction of burst effects (k ≈ 0.01–0.02 h−1). The nanocomposite system herein proposed represents a new material formulation for preparing innovative drug eluting stents with intrinsic antibacterial properties.

scholarly journals Co-electrospun nanofibrous mats loaded with bitter gourd (Momordica charantia) extract as the wound dressing materials: in vitro and in vivo study

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Mohammad Saeid Salami ◽  
Gholamreza Bahrami ◽  
Elham Arkan ◽  
Zhila Izadi ◽  
Shahram Miraghaee ◽  
...  
Keyword(s):  
Wound Dressing ◽  
Biological Activities ◽  
Healing Process ◽  
Momordica Charantia ◽  
Wound Dressings ◽  
Vapor Permeability ◽  
Dressing Materials ◽  
Wound Dressing Materials

Abstract Background Interactive dressings are innovatively designed to interact with the wound surface and alter the wound environment to promote wound healing. In the current study, we integrated the physicochemical properties of Poly (caprolactone)/ Poly (vinyl alcohol)/Collagen (PCL/PVA/Col) nanofibers with the biological activities of Momordica charantia pulp extract to develop an efficient wound dressing. The electrospinning method was applied to fabricate the nanofibers, and the prepared wound dressings were thoroughly characterized. Results SEM imaging showed that the nanofibers were uniform, straight, without any beds with a diameter in the range of 260 to 480 nm. Increasing the concentration of the extract increased the diameter of the nanofibers and also the wettability characteristics while reduced the ultimate tensile strength from 4.37 ± 0.90 MPa for PCL/PVA/Col to 1.62 ± 0.50 MPa for PCL/PVA/Col/Ex 10% (p < 0.05). The in vivo studies showed that the application of the wound dressings significantly enhanced the healing process and the highest wound closure, 94.01 ± 8.12%, was obtained by PCL/PVA/Col/Ex 10% nanofibers (p < 0.05). Conclusion The incorporation of the extract had no significant effects on nanofibers’ porosity, water vapor permeability, and swelling characteristics. The in vitro evaluations showed that the fabricated nanofibers were hemocompatible, cytocompatible, and prevent bacterial penetration through the dressing. These findings implied that the PCL/PVA/Col/Ex nanofibers can be applied as the wound dressing materials.

Porous SBA-15/cellulose membrane with prolonged anti-microbial drug release characteristics for potential wound dressing application

Cellulose ◽  
2020 ◽  
Vol 27 (5) ◽  
pp. 2737-2756
Author(s):  
Zhi Shen ◽  
Ning Cai ◽  
Yanan Xue ◽  
Bo Yu ◽  
Jianzhi Wang ◽  
...  
Keyword(s):  
Drug Release ◽  
Wound Dressing ◽  
Cellulose Membrane

scholarly journals Fabrication of Hybrid Nanofibers from Biopolymers and Poly (Vinyl Alcohol)/Poly (ε-Caprolactone) for Wound Dressing Applications

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2104
Author(s):  
Sibusiso Alven ◽  
Blessing Atim Aderibigbe
Keyword(s):  
Mechanical Properties ◽  
Wound Healing ◽  
Vinyl Alcohol ◽  
Wound Dressing ◽  
Chronic Wounds ◽  
Cellular Adhesion ◽  
Wound Dressings ◽  
Poly Vinyl Alcohol ◽  
High Porosity ◽  
Hybrid Nanofibers

The management of chronic wounds is challenging. The factors that impede wound healing include malnutrition, diseases (such as diabetes, cancer), and bacterial infection. Most of the presently utilized wound dressing materials suffer from severe limitations, including poor antibacterial and mechanical properties. Wound dressings formulated from the combination of biopolymers and synthetic polymers (i.e., poly (vinyl alcohol) or poly (ε-caprolactone) display interesting properties, including good biocompatibility, improved biodegradation, good mechanical properties and antimicrobial effects, promote tissue regeneration, etc. Formulation of these wound dressings via electrospinning technique is cost-effective, useful for uniform and continuous nanofibers with controllable pore structure, high porosity, excellent swelling capacity, good gaseous exchange, excellent cellular adhesion, and show a good capability to provide moisture and warmth environment for the accelerated wound healing process. Based on the above-mentioned outstanding properties of nanofibers and the unique properties of hybrid wound dressings prepared from poly (vinyl alcohol) and poly (ε-caprolactone), this review reports the in vitro and in vivo outcomes of the reported hybrid nanofibers.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals Development of In Situ Self-Assembly Nanoparticles to Encapsulate Lopinavir and Ritonavir for Long-Acting Subcutaneous Injection

Pharmaceutics ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 904
Author(s):  
Irin Tanaudommongkon ◽  
Asama Tanaudommongkon ◽  
Xiaowei Dong
Keyword(s):  
Sustained Release ◽  
Trough Concentration ◽  
Self Assembly ◽  
Subcutaneous Injection ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Long Acting

Most antiretroviral medications for human immunodeficiency virus treatment and prevention require high levels of patient adherence, such that medications need to be administered daily without missing doses. Here, a long-acting subcutaneous injection of lopinavir (LPV) in combination with ritonavir (RTV) using in situ self-assembly nanoparticles (ISNPs) was developed to potentially overcome adherence barriers. The ISNP approach can improve the pharmacokinetic profiles of the drugs. The ISNPs were characterized in terms of particle size, drug entrapment efficiency, drug loading, in vitro release study, and in vivo pharmacokinetic study. LPV/RTV ISNPs were 167.8 nm in size, with a polydispersity index of less than 0.35. The entrapment efficiency was over 98% for both LPV and RTV, with drug loadings of 25% LPV and 6.3% RTV. A slow release rate of LPV was observed at about 20% on day 5, followed by a sustained release beyond 14 days. RTV released faster than LPV in the first 5 days and slower than LPV thereafter. LPV trough concentration remained above 160 ng/mL and RTV trough concentration was above 50 ng/mL after 6 days with one subcutaneous injection. Overall, the ISNP-based LPV/RTV injection showed sustained release profiles in both in vitro and in vivo studies.

scholarly journals Development of Spanish Broom and Flax Dressings with Glycyrrhetinic Acid-Loaded Films for Wound Healing: Characterization and Evaluation of Biological Properties

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1192
Author(s):  
Angela Abruzzo ◽  
Concettina Cappadone ◽  
Valentina Sallustio ◽  
Giovanna Picone ◽  
Martina Rossi ◽  
...  
Keyword(s):  
Wound Healing ◽  
Drug Loading ◽  
Healing Process ◽  
In Vitro Release ◽  
Sodium Hyaluronate ◽  
Biological Properties ◽  
Glycyrrhetinic Acid ◽  
Wound Dressings ◽  
Biological Studies

The selection of an appropriate dressing for each type of wound is a very important procedure for a faster and more accurate healing process. So, the aim of this study was to develop innovative Spanish Broom and flax wound dressings, as alternatives to cotton used as control, with polymeric films containing glycyrrhetinic acid (GA) to promote wound-exudate absorption and the healing process. The different wound dressings were prepared by a solvent casting method, and characterized in terms of drug loading, water uptake, and in vitro release. Moreover, biological studies were performed to evaluate their biocompatibility and wound-healing efficacy. Comparing the developed wound dressings, Spanish Broom dressings with GA-loaded sodium hyaluronate film had the best functional properties, in terms of hydration ability and GA release. Moreover, they showed a good biocompatibility, determining a moderate induction of cell proliferation and no cytotoxicity. In addition, the wound-healing test revealed that the Spanish Broom dressings promoted cell migration, further facilitating the closure of the wound.

Preparation of biocompatible wound dressings with dual release of antibiotic and platelet-rich plasma for enhancing infected wound healing

2021 ◽  
pp. 088532822199601
Author(s):  
Linying Shi ◽  
Fang Lin ◽  
Mou Zhou ◽  
Yanhui Li ◽  
Wendan Li ◽  
...  
Keyword(s):  
Wound Healing ◽  
Wound Dressing ◽  
Platelet Rich Plasma ◽  
Healing Process ◽  
Wound Dressings ◽  
Inflammatory Factors ◽  
Gelatin Microspheres ◽  
Infected Wounds ◽  
Dual Release

The ever-growing threats of bacterial infection and chronic wound healing have provoked an urgent need for novel antibacterial wound dressings. In this study, we developed a wound dressing for the treatment of infected wounds, which can reduce the inflammatory period (through the use of gentamycin sulfate (GS)) and enhance the granulation stage (through the addition of platelet-rich plasma (PRP)). Herein, the sustained antimicrobial CMC/GMs@GS/PRP wound dressings were developed by using gelatin microspheres (GMs) loading GS and PRP, covalent bonding to carboxymethyl chitosan (CMC). The prepared dressings exhibited high water uptake capability, appropriate porosity, excellent mechanical properties, sustain release of PRP and GS. Meanwhile, the wound dressing showed good biocompatibility and excellent antibacterial ability against Gram-negative and Gram-positive bacteria. Moreover, in vivo experiments further demonstrated that the prepared dressings could accelerate the healing process of E. coli and S. aureus-infected full-thickness wounds i n vivo, reepithelialization, collagen deposition and angiogenesis. In addition, the treatment of CMC/GMs@GS/PRP wound dressing could reduce bacterial count, inhibit pro-inflammatory factors (TNF-α, IL-1β and IL-6), and enhance anti-inflammatory factors (TGF-β1). The findings of this study suggested that biocompatible wound dressings with dual release of GS and PRP have great potential in the treatment of chronic and infected wounds.

Sign in / Sign up

Export Citation Format

Share Document