scholarly journals Representative Cell Analysis for Damage-Based Failure Model of Polymer Hexagonal Honeycomb Structure under the Out-of-Plane Loadings

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 52
Author(s):  
Muhammad Salman Khan ◽  
Ainullotfi Abdul-Latif ◽  
Seyed Saeid Rahimian Koloor ◽  
Michal Petrů ◽  
Mohd Nasir Tamin
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Cell Model ◽  
Failure Process ◽  
Honeycomb Structure ◽  
Core Structure ◽  
Fracture Plane ◽  
Plane Shear ◽  
Representative Cell ◽  
Out Of Plane

The honeycomb (HC) core of sandwich structures undergoes flexural loading and carries the normal compression and shear. The mechanical properties and deformation response of the core need to be established for the design requirements. In this respect, this article describes the development of the smallest possible representative cell (RC) models for quantifying the deformation and failure process of the Nomex polymer-based hexagonal HC core structure under the out-of-plane quasi-static loadings. While the hexagonal single and multi-cell models are suitable for the tension and compression, a six-cell model is the simplest RC model developed for shear in the transverse and ribbon direction. Hashin’s matrix and fiber damage equations are employed in simulating the failure process of the orthotropic cell walls, using the finite element (FE) analysis. The FE-calculated load–displacement curves are validated with the comparable measured responses throughout the loading to failure. The location of the fracture plane of the critical cell wall in the out-of-plane tension case is well predicted. The wrinkling of the cell walls, leading to the structural buckling of the HC core specimen in the compression test, compares well with the observed failure mechanisms. In addition, the observed localized buckling of the cell wall by the induced compressive stress during the out-of-plane shear in both the transverse and ribbon direction is explained. The mesoscale RC models of the polymer hexagonal HC core structure have adequately demonstrated the ability to predict the mechanics of deformation and the mechanisms of failure.

Analysis Cell Deformation of Undersize Log of Northeast Larch

2014 ◽  
Vol 584-586 ◽  
pp. 1145-1154
Author(s):  
Lin He ◽  
Jian Yuan ◽  
Feng Fan
Keyword(s):  
Cell Wall ◽  
Failure Process ◽  
Cell Deformation ◽  
Direct Proportion ◽  
Deformation And Failure ◽  
Late Wood ◽  
Out Of Plane ◽  
Initial Preparation ◽  
Temporary Structure ◽  
First Time

As the potential of using natural log is explored in the temporary structure, especially in template as the shores, it is important to gain further understanding of the microstructure and properties of cells such as undersize tree of Northeast larch that under macro buckling load. The research described in this paper focuses, for the first time, after the initial preparation by microtoming, on investigating the microstructure of log by analyzing of the ESEM images, and a model for deformation and failure mechanism of the cell had been proposed, then, the properties of cells were calculated through image software. Results show that the cells including early wood and late wood under without extra load are regularly arrayed, the deformation of the wall was induced by asymmetric out of plane twisting and splitting due to buckling of the logs, failure of the early wood cell is easily than late wood that following the large deformation occurs at plasticity, and two properties including late wood percentage and cell wall percentage has a direct proportion with the strength of log. The presented results indicate that it is improve to understand and analyze the failure process of cell when the log under concrete compression loading, and the reason that log as sustainable material is due to the unbroken cell clusters recover themselves as quickly as possible during at a certain enough time.

Silicification of wood-cell walls

1994 ◽  
Vol 52 ◽  
pp. 428-429
Author(s):  
S. E. Keckler ◽  
D. M. Dabbs ◽  
N. Yao ◽  
I. A. Aksay
Keyword(s):  
Electron Microscopy ◽  
Cell Wall ◽  
Cell Walls ◽  
Lignin Content ◽  
Resin Composite ◽  
Middle Lamella ◽  
Cellulose Fibers ◽  
Complex Structures ◽  
Rich Region ◽  
Inorganic Precursors

Cellular organic structures such as wood can be used as scaffolds for the synthesis of complex structures of organic/ceramic nanocomposites. The wood cell is a fiber-reinforced resin composite of cellulose fibers in a lignin matrix. A single cell wall, containing several layers of different fiber orientations and lignin content, is separated from its neighboring wall by the middle lamella, a lignin-rich region. In order to achieve total mineralization, deposition on and in the cell wall must be achieved. Geological fossilization of wood occurs as permineralization (filling the void spaces with mineral) and petrifaction (mineralizing the cell wall as the organic component decays) through infiltration of wood with inorganics after growth. Conversely, living plants can incorporate inorganics into their cells and in some cases into the cell walls during growth. In a recent study, we mimicked geological fossilization by infiltrating inorganic precursors into wood cells in order to enhance the properties of wood. In the current work, we use electron microscopy to examine the structure of silica formed in the cell walls after infiltration of tetraethoxysilane (TEOS).

Histological aspects of the cryopreservation of potato

2008 ◽  
Vol 56 (3) ◽  
pp. 341-348
Author(s):  
P. Pepó ◽  
A. Kovács
Keyword(s):  
Cell Wall ◽  
Low Temperatures ◽  
Cell Walls ◽  
Cellular Level ◽  
Adaptive Mechanism ◽  
Epidermal Layer ◽  
Freezing And Thawing ◽  
Meristematic Cells ◽  
Suitable Solution ◽  
Vacuolated Cells

Cryopreservation appears to be a suitable solution for the maintenance of potato germplasms. The protocol described in this paper can be applied for the vitrification and preservation of meristems. During histo-cytological studies it is possible to observe modifications at the cellular level and to understand the adaptive mechanism to low temperatures. Control potato meristem tissue contained a number of meristematic cells with a gradient of differentiation. After freezing there were a large number of vacuolated cells, some of which exhibited broken cell walls and plasmolysis. The thickening of the cell wall, giving them a sinuous appearance, was observed after freezing and thawing the meristems, with ruptures of the cuticle and epidermal layer.

scholarly journals Plant Cell Wall Hydration and Plant Physiology: An Exploration of the Consequences of Direct Effects of Water Deficit on the Plant Cell Wall

Plants ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1263
Author(s):  
David Stuart Thompson ◽  
Azharul Islam
Keyword(s):  
Cell Wall ◽  
Water Content ◽  
Bacterial Cellulose ◽  
Plant Cell ◽  
Cell Walls ◽  
Plant Cell Wall ◽  
Plant Cell Walls ◽  
Cell Wall Polysaccharides ◽  
Degree Of Hydration ◽  
Cellulose Composites

The extensibility of synthetic polymers is routinely modulated by the addition of lower molecular weight spacing molecules known as plasticizers, and there is some evidence that water may have similar effects on plant cell walls. Furthermore, it appears that changes in wall hydration could affect wall behavior to a degree that seems likely to have physiological consequences at water potentials that many plants would experience under field conditions. Osmotica large enough to be excluded from plant cell walls and bacterial cellulose composites with other cell wall polysaccharides were used to alter their water content and to demonstrate that the relationship between water potential and degree of hydration of these materials is affected by their composition. Additionally, it was found that expansins facilitate rehydration of bacterial cellulose and cellulose composites and cause swelling of plant cell wall fragments in suspension and that these responses are also affected by polysaccharide composition. Given these observations, it seems probable that plant environmental responses include measures to regulate cell wall water content or mitigate the consequences of changes in wall hydration and that it may be possible to exploit such mechanisms to improve crop resilience.

Synchrotron infrared microspectroscopy reveals the response of Sphagnum cell wall material to its aqueous chemical environment

2018 ◽  
Vol 15 (8) ◽  
pp. 513
Author(s):  
Ewen Silvester ◽  
Annaleise R. Klein ◽  
Kerry L. Whitworth ◽  
Ljiljana Puskar ◽  
Mark J. Tobin
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Chemical Environment ◽  
Wall Material ◽  
Organic Soils ◽  
Cell Wall Material ◽  
Acid Base ◽  
Widespread Species ◽  
Flowing Liquid ◽  
Infrared Microspectroscopy

Environmental contextSphagnum moss is a widespread species in peatlands globally and responsible for a large fraction of carbon storage in these systems. We used synchrotron infrared microspectroscopy to characterise the acid-base properties of Sphagnum moss and the conditions under which calcium uptake can occur (essential for plant tissue integrity). The work allows a chemical model for Sphagnum distribution in the landscape to be proposed. AbstractSphagnum is one the major moss types responsible for the deposition of organic soils in peatland systems. The cell walls of this moss have a high proportion of carboxylated polysaccharides (polygalacturonic acids), which act as ion exchangers and are likely to be important for the structural integrity of the cell walls. We used synchrotron light source infrared microspectroscopy to characterise the acid-base and calcium complexation properties of the cell walls of Sphagnum cristatum stems, using freshly sectioned tissue confined in a flowing liquid cell with both normal water and D2O media. The Fourier transform infrared spectra of acid and base forms are consistent with those expected for protonated and deprotonated aliphatic carboxylic acids (such as uronic acids). Spectral deconvolution shows that the dominant aliphatic carboxylic groups in this material behave as a monoprotic acid (pKa=4.97–6.04). The cell wall material shows a high affinity for calcium, with a binding constant (K) in the range 103.9–104.7 (1:1 complex). The chemical complexation model developed here allows for the prediction of the chemical environment (e.g. pH, ionic content) under which Ca2+ uptake can occur, and provides an improved understanding for the observed distribution of Sphagnum in the landscape.

scholarly journals Even Visually Intact Cell Walls in Waterlogged Archaeological Wood Are Chemically Deteriorated and Mechanically Fragile: A Case of a 170 Year-Old Shipwreck

Molecules ◽  
2020 ◽  
Vol 25 (5) ◽  
pp. 1113 ◽  
Author(s):  
Liuyang Han ◽  
Xingling Tian ◽  
Tobias Keplinger ◽  
Haibin Zhou ◽  
Ren Li ◽  
...  
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Intact Cell ◽  
Nitrogen Adsorption ◽  
Wet Chemistry ◽  
Archaeological Wood ◽  
Waterlogged Archaeological Wood ◽  
X Ray Scattering ◽  
Crystallite Structure ◽  
Cell Wall Mechanics

Structural and chemical deterioration and its impact on cell wall mechanics were investigated for visually intact cell walls (VICWs) in waterlogged archaeological wood (WAW). Cell wall mechanical properties were examined by nanoindentation without prior embedding. WAW showed more than 25% decrease of both hardness and elastic modulus. Changes of cell wall composition, cellulose crystallite structure and porosity were investigated by ATR-FTIR imaging, Raman imaging, wet chemistry, 13C-solid state NMR, pyrolysis-GC/MS, wide angle X-ray scattering, and N2 nitrogen adsorption. VICWs in WAW possessed a cleavage of carboxyl in side chains of xylan, a serious loss of polysaccharides, and a partial breakage of β-O-4 interlinks in lignin. This was accompanied by a higher amount of mesopores in cell walls. Even VICWs in WAW were severely deteriorated at the nanoscale with impact on mechanics, which has strong implications for the conservation of archaeological shipwrecks.

Sign in / Sign up

Export Citation Format

Share Document