scholarly journals Effect of Lignin Modifier on Engineering Performance of Bituminous Binder and Mixture

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1083
Author(s):  
Chi Xu ◽  
Duanyi Wang ◽  
Shaowei Zhang ◽  
Enbei Guo ◽  
Haoyang Luo ◽  
...  
Keyword(s):  
Asphalt Binder ◽  
Gel Permeation Chromatography ◽  
Creep Recovery ◽  
Test Results ◽  
Aspen Wood ◽  
Multiple Stress Creep Recovery ◽  
Modified Binder ◽  
The Fourier Transform ◽  
Marshall Stability ◽  
Positive Effect

Lignin accounts for approximately 30% of the weight of herbaceous biomass. Utilizing lignin in asphalt pavement industry could enhance the performance of pavement while balancing the construction cost. This study aims to evaluate the feasibility of utilizing lignin as a bitumen performance improver. For this purpose, lignin derived from aspen wood chips (labeled as KL) and corn stalk residues (labeled as CL) were selected to prepare the lignin modified bituminous binder. The properties of the lignin modified binder were investigated through rheological, mechanical and chemical tests. The multiple stress creep recovery (MSCR) test results indicated that adding lignin decreased the Jnr of based binder by a range of 8% to 23% depending on the stress and lignin type. Lignin showed a positive effect on the low temperature performance of asphalt binder, because at −18 °C, KL and CL were able to reduce the stiffness of base binder from 441 MPa to 369 MPa and 378 MPa, respectively. However, lignin was found to deteriorate the fatigue life and workability of base binder up to 30% and 126%. With bituminous mixture, application of lignin modifiers improved the Marshall Stability and moisture resistance of base mixture up to 21% and 13%, respectively. Although, adding lignin modifiers decreased the molecular weight of asphalt binder according to the gel permeation chromatography (GPC) test results. The Fourier-transform infrared spectroscopy (FTIR) test results did not report detectable changes in functional group of based binder.

scholarly journals Laboratory Evaluation of Sustainable PMA Binder Containing Styrene-Isoprene-Styrene (SIS) and Thermoplastic Polyurethane

2020 ◽  
Vol 12 (23) ◽  
pp. 10057
Author(s):  
Hyun Hwan Kim ◽  
Mithil Mazumder ◽  
Soon-Jae Lee ◽  
Moon-Sup Lee
Keyword(s):  
Thermoplastic Polyurethane ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Laboratory Evaluation ◽  
Creep Recovery ◽  
Before And After ◽  
Multiple Stress Creep Recovery ◽  
Compaction Processes ◽  
Positive Effect

In this study, thermoplastic polyurethane (TPU) and styrene-isoprene-styrene (SIS) were utilized to enhance asphalt binder properties. Superpave asphalt binder tests and multiple stress creep recovery (MSCR) were conducted to evaluate the physical and rheological performance (viscosity, rutting, and cracking properties) of the asphalt binders before and after short-term aging and after the long-term aging process. The results showed that (i) TPU has a positive effect on workability, including the mixing and compaction processes, which was evident from the reduced binder viscosity; (ii) asphalt binders with TPU and SIS showed better rutting resistance compared to the SIS binders without TPU; (iii) the cracking resistance of asphalt binders was found to be improved significantly with the addition of TPU; and (iv) TPU has the potential to be considered as a sustainable polymer modifier for producing bearable asphalt binders by improving rutting and crack resistance without increasing the melting temperature of the asphalt binders.

scholarly journals Studying Engineering Characteristics of Asphalt Binder and Mixture Modified by Nanosilica and Estimating Their Correlations

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Moein Hasaninia ◽  
Farshad Haddadi
Keyword(s):  
Asphalt Binder ◽  
Fatigue Tests ◽  
Engineering Properties ◽  
Fatigue Properties ◽  
Creep Recovery ◽  
Statistical Correlations ◽  
Four Point Bending ◽  
Dynamic Creep ◽  
Modified Binder ◽  
Marshall Stability

The objective of this research was to investigate rutting and fatigue distresses in asphalt containing 2, 4, 6, and 8 percent of nanosilica (NC) and to find out the correlation between engineering properties of the modified binder and mixture asphalt. In order to study the effect of NC on the rutting and fatigue properties of modified binders, the multiple stress creep recovery (MSCR) and linear amplitude sweep (LAS) tests were carried out. The Marshall stability, dynamic creep, and four-point bending beam fatigue tests were used to evaluate performance characteristics of the mixtures. The binder and mixture tests all indicated an improvement of fatigue and rutting resistance using NC as a modifier. Furthermore, some statistical correlations between engineering properties were developed successfully.

scholarly journals Multiple Stress Creep Recovery (MSCR) Test for Determination of Waste Engine Oil Modified Asphalt Binder as Pavement Material

2022 ◽  
pp. 8-14
Author(s):  
Biruk Tadele ◽  
Emer T Quezon
Keyword(s):  
Asphalt Binder ◽  
Engine Oil ◽  
Creep Recovery ◽  
Multiple Stress ◽  
Modified Asphalt ◽  
Waste Engine Oil ◽  
Modified Asphalt Binder ◽  
Multiple Stress Creep Recovery ◽  
Modified Binder ◽  
Pavement Material

Engineers have been using modified binders to improve the quality of flexible pavements. The use of waste material is one of the solutions taken in this direction. It is for this ground that the studies emphasis on the evaluation of waste engine oil as a modifier for asphalt binder as a pavement material. In the study uses four samples extracted from 80/100 penetration grade bitumen. From four sample first sample was checked for weather requirements of asphalt binder meet or not and the three were modified with different content of engine oil (3,6 and 9%). The behaviors of both unmodified and modified binder were checked for rheological properties. Dynamic shear rheometer (DSR) was used to determine high temperature performance grade (PG) and multiple stress creep recovery tests to determine rutting resistance properties of the binder. PG analysis indicates that both aged and un-aged 3% and 6% modified binder have similar higher PG grade with the unmodified one and 9% modified to have lower PG vale. Jnr3.2 value of modified asphalt binder is lower than unmodified binder indicating that modification had improved the rutting resistance and design traffic load (ESALS). The study shows that it is possible to use waste engine oil-modified binder as a pavement material.

Rheological and Molecular Characterizations of Tire Rubber Modified Asphalt Emulsion

2020 ◽  
Vol 2674 (3) ◽  
pp. 12-26 ◽  
Author(s):  
Md Tanvir Ahmed Sarkar ◽  
Md Nafiur Rahman ◽  
Mostafa A. Elseifi ◽  
Corey Mayeux ◽  
Samuel B. Cooper
Keyword(s):  
Rheological Properties ◽  
Asphalt Binder ◽  
Gel Permeation Chromatography ◽  
The Other ◽  
Creep Recovery ◽  
Test Results ◽  
Asphalt Emulsion ◽  
Tire Rubber ◽  
Modified Asphalt ◽  
Performance Grade

The aim of this study was to characterize the chemical, molecular, and rheological properties of different asphalt emulsions including a newly introduced tire-rubber modified asphalt emulsion (CRS-2TR). Three emulsions (CRS-2TR, CRS-2P, and CRS-2) and one asphalt rubber binder (AC20-5TR) were evaluated in this study. The superpave performance grade (PG), surface performance grade (SPG), and the multiple stress creep recovery (MSCR) test were conducted to evaluate the rheological properties of the binder residues. Evaluation of the differences in the functional groups, molecular weight distribution, and chemical composition of the asphalt binder residues was conducted using Fourier transform infrared spectroscopy (FTIR), high-pressure gel permeation chromatography (HP-GPC), and saturates, aromatics, resins and asphaltenes (SARA) fractionation, respectively. The chemical and molecular characterization test results indicated that the tire-rubber modified emulsion had lower carbonyl indices and colloidal instability indices as compared to the other conventional emulsions, indicating a higher resistance to aging. On the other hand, the rheological test results showed that the performance of CRS-2TR was comparable to CRS-2P and was expected to perform better than CRS-2. In addition, the moisture susceptibility of the binder residues from the bitumen bond strength (BBS) test showed that CRS-2TR had a greater pull-off tensile strength in both dry and wet conditions as compared to CRS-2 and had statistically equal performance results as compared to CRS-2P.

Determining Optimum Carbon Nanotubes Content for Asphalt Mixture in Road Pavements

2021 ◽  
Vol 1023 ◽  
pp. 121-126
Author(s):  
Van Bach Le ◽  
Van Phuc Le
Keyword(s):  
Carbon Nanotubes ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Construction Cost ◽  
Asphalt Mixtures ◽  
Static Modulus ◽  
Pavement Construction ◽  
Modified Binder ◽  
Marshall Stability

Although small amount of binder in asphalt concrete mixture may commonly range from 3.5 to 5.5% of total mixture as per many international specifications, it has a significant impact on the total cost of pavement construction. Therefore, this paper investigated the effects of five carbon nanotubes contents of 0.05%, 0.1%, 0.15%, 0.2%, 0.25% by asphalt weight as an additive material for binder on performance characteristics of asphalt mixtures. Performance properties of CNTs modified asphalt mixtures were investigated through the Marshall stability (MS) test, indirect tensile (IDT) test, static modulus (SM) test, wheel tracking (WT) test. The results indicated that asphalt mixtures with CNT modified binder can improve both the rutting performance, IDT strength and marshall stability of tested asphalt mixtures significantly at higher percentages of carbon nanotubes. However, the issue that should be considered is the construction cost of asphalt pavement. Based on the asphalt pavement structural analysis and construction cost, it can be concluded that an optimum CNT content of 0.1% by asphalt weight may be used as additive for asphalt binder in asphalt mixtures.

scholarly journals Evaluation of Petroleum Resin in Rubberized Asphalt Binder

2021 ◽  
Vol 13 (16) ◽  
pp. 9319
Author(s):  
Hyun Hwan Kim ◽  
Mithil Mazumder ◽  
Moon-Sup Lee ◽  
Soon-Jae Lee
Keyword(s):  
Thin Film ◽  
Low Temperatures ◽  
Asphalt Binder ◽  
Crumb Rubber ◽  
Creep Recovery ◽  
Dynamic Shear ◽  
Bending Beam Rheometer ◽  
Rotational Viscometer ◽  
Multiple Stress ◽  
Multiple Stress Creep Recovery

The crumb rubber modified (CRM) binder was evaluated considering the general operating temperatures of high, intermediate, and low temperatures. CRM binders were produced with four different contents (0, 5, 10, and 15%) using the base asphalt binder (PG64-22). Then, they were artificially aged by a rolling thin-film oven (RTFO) and pressure aging vessel (PAV). Superpave binder tests using a rotational viscometer (RV), dynamic shear rheometer (DSR), and bending beam rheometer (BBR) was applied to characterize the performance of the original and aged binders. Multiple stress creep recovery (MSCR) tests were also performed for deeper rutting characterization. The results of this study are as follows: (1) the presence of PR increases the binder viscosity, (2) the integration of CRM greatly improved the rutting resistance of the binder, and it was found that PR also improved the rutting characteristics, and (3) it is observed that PR is detrimental to the cracking properties of CRM binders.

Sign in / Sign up

Export Citation Format

Share Document