scholarly journals Performance Assessment of a Hybrid Vapor Compression and Evaporative Cooling Fresh-Air-Handling Unit Operating in Hot Climates

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 872 ◽  
Author(s):  
Yousef Al Horr ◽  
Bourhan Tashtoush ◽  
Nelson Chilengwe ◽  
Mohamed Musthafa
Keyword(s):  
Cooling System ◽  
Evaporative Cooling ◽  
Climatic Conditions ◽  
Coefficient Of Performance ◽  
Vapor Compression ◽  
Direct Expansion ◽  
Ambient Conditions ◽  
Air Handling Unit ◽  
Mode Of Operation ◽  
Cooling Effects

Evaporative cooling can be integrated into fresh-air-handling units, to reduce cooling demand. This study considers a hybrid fresh-air-handling unit which incorporates a vapor-compression cooling cycle and indirect evaporative cooling to condition an ambient primary airstream to a desired supply air state. The cooling effects of using various modes (vapor compression only; direct expansion with mist; direct expansion with water shower; and direct expansion with mist and water shower) are compared when the fresh-air-handling unit operates in harsh (hot and humid) climatic conditions experienced in Qatar. Experimental analysis is based on actual ambient conditions measured from August 2018 to July 2019. It is found that the best-performing wet mode of operation saves more than 60% of the energy required by a conventional direct expansion cooling system operating under the same ambient conditions. In hot, dry conditions, the coefficient of performance of the fresh-air-handling unit when using the indirect evaporative mode of operation is double the coefficient of performance when operating with direct expansion mode only.

scholarly journals Numerical investigations of solar-assisted hybrid desiccant evaporative cooling system for hot and humid climate

2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093499
Author(s):  
Shafqat Hussain ◽  
Abdulrahim Kalendar ◽  
Muhammad Zeeshan Rafique ◽  
Patrick Oosthuizen
Keyword(s):  
Relative Humidity ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Coefficient Of Performance ◽  
Cooling Load ◽  
Vapor Compression ◽  
Humid Climate ◽  
Numerical Investigations ◽  
Evaporative Cooling System

This article presents numerical investigations of the solar-assisted hybrid desiccant evaporative cooling system integrated with standard air collectors for applications under the hot and humid climatic conditions of Kuwait city. The objective is to introduce the energy-efficient and carbon-free solar-assisted hybrid desiccant evaporative cooling system to alleviate the principal problems of electricity consumption and carbon emissions resulting from the use of the conventional vapor-compression cooling systems. In the normal building, during cooling load operation, the solar-assisted hybrid desiccant evaporative cooling system can cope with the cooling load particularly sensible by evaporative cooling and latent through desiccant dehumidification. The outcomes of this work indicate that solar-assisted hybrid desiccant evaporative cooling device integrated with air collectors is capable of providing average coefficient of performance of 0.85 and has the potential to provide cooling with energy saving when compared with conventional vapor-compression refrigeration systems. It was concluded that under the intense outdoor environmental conditions (ambient air at greater than 45°C and 60% relative humidity), the delivered supply air from the evaporative cooling was nearly at 27°C and 65% relative humidity. To solve this problem, the system was assisted with conventional cooling coil (evaporator of heat pump) to supply air at comfortable conditions in the conditioned space.

scholarly journals Alternative Air-Conditioning Options for Developing Countries

2017 ◽  
Vol 2 (1) ◽  
pp. 76 ◽  
Author(s):  
Muhammad Kashif ◽  
Muhammad Sultan ◽  
Zahid Mahmood Khan
Keyword(s):  
Developing Countries ◽  
Air Conditioning ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Climatic Conditions ◽  
Individual Characteristics ◽  
Coefficient Of Performance ◽  
Air Conditioning System ◽  
Evaporative Cooling System

This study assesses the potential selection of efficient air-conditioning (AC) and cooling systems in order to avoid excess power consumption, mitigation of harmful refrigerants generated by the existing AC systems. Several varieties of active and passive air-conditioning systems i.e. heating ventilating air-conditioning (HVAC), vapor compression air-conditioning (VCAC) conventional direct evaporative cooling (DEC) and indirect evaporative cooling (IEC)  and desiccant air-conditioning (DAC) systems are under practice for the cooling and dehumidification. The storage of agricultural products mainly based on product individual characteristics i.e. respiration rate, transpiration rate and moisture content of that product. Variant ambient air conditions and the type of application are the main parameters for the choice of air-conditioning system to get optimum performance. The DAC system subsidize the coefficient of performance (COP) in humid regions, coastal ranges of developing countries e.g. Karachi and Gawadar (Pakistan) with hot humid climatic conditions. In similar way, hottest regions of the country such as Sibbi, Jacobabad and Multan perform better results when incorporates with M-cycle evaporative cooling system. Variation in ambient air conditions directly affect the cooling load and the choice of sustainable air-conditioning system

scholarly journals Investigação experimental em escala reduzida sobre o uso de telhas cerâmicas como sistema de resfriamento evaporativo

2019 ◽  
Vol 1 (46) ◽  
pp. 121
Author(s):  
Marcelo Paes De Barros
Keyword(s):  
Air Conditioning ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Temperature Drop ◽  
Porous Ceramics ◽  
Climatic Conditions ◽  
Evaporative Cooling System ◽  
Cooling Effects ◽  
Scale Experiment ◽  
Reduced Scale

<p>The present paper describes an experiment that clarifies the cooling effects of the constructed system. Tested in the Cuiabá, MT, environment, the system’s performance,, which works on the evaporative cooling principle made for this study using clay roof tiles was checked in terms of temperature drop and humidity rise air which passes through the system to the surroundings. The result showed that the cooling effect reached a maximum of 3.5 °C and increased the relative humidity of incoming air around 10%. The reduced-scale experiment has reached the appropriate temperature and humidity for air conditioning under human environmental comfort conditions in hot and dry climatic conditions, in 86.4% of the measurement periods. The use of porous ceramics as an evaporative cooling system offers the advantage of the integration into building elements.</p>

scholarly journals Desiccant cooling as an alternative to traditional air conditioners in green cooling technology

2019 ◽  
pp. 01-13
Author(s):  
Jani DB
Keyword(s):  
Air Conditioning ◽  
Energy Savings ◽  
Cooling System ◽  
Green Building ◽  
Climatic Conditions ◽  
Coefficient Of Performance ◽  
Low Grade ◽  
Vapor Compression ◽  
Cooling Technology ◽  
Air Conditioning Systems

Desiccant-based dehumidification and air conditioning systems are considered as an energy efficient alternative to traditional vapor compression based air-conditioning systems for green building cooling technology especially in tropical hot and humid ambient climates. It is a novel green cooling technology that makes use of low-grade heat for building air conditioning. It is seen that the desiccant based dehumidification and cooling can efficiently provide comfort conditions in subtropical and especially hot and humid tropical climates. The desiccant integrated novel cooling system has a significant higher coefficient of performance compared to the conventional vapor compression system resulting to substantial electrical energy savings during the summer season by use of renewable solar energy, which also resulted in to major reduction in CO2 emissions. Therefore, these results demonstrate that there is a good potential in desiccant-based dehumidification and cooling system for energy and carbon savings while carry out building air-conditioning. Through a literature review, the feasibility of the desiccant assisted air conditioning in hot and humid climatic conditions is proven and the advantages it can offer in terms energy and cost savings are underscored. Keywords: Air-conditioning; Desiccant cooling; Dehumidification; Green cooling; Thermal comfort

Optimized Refrigerant Flow Rate and Dimensions of the Ejector Employed in a Modified Ejector Vapor Compression System

2020 ◽  
Vol 28 (04) ◽  
pp. 2050038
Author(s):  
Dishant Sharma ◽  
Gulshan Sachdeva ◽  
Dinesh Kumar Saini
Keyword(s):  
Flow Rate ◽  
Cooling System ◽  
Cooling Capacity ◽  
Coefficient Of Performance ◽  
Vapor Compression ◽  
Evaporator Temperature ◽  
Proposed Model ◽  
Condenser Temperature ◽  
Vapor Compression System ◽  
Vapor Compression Cooling

This paper presents the analysis of a modified vapor compression cooling system which uses an ejector as an expansion device. Expanding refrigerant in an ejector enhances the refrigeration effect and reduces compressor work. Therefore, it yields a better coefficient of performance. Thermodynamic analysis of a constant area ejector model has been done to obtain primary dimensions of the ejector for given condenser and evaporator temperature and cooling capacity. The proposed model has been used to design the ejector for three refrigerants; R134a, R152a and R1234yf. The refrigerant flow rate and the diameters at various sections of the ejector have been obtained by doing numerical modeling in Engineering Equation Solver (EES). Refrigerant R1234yf demanded the highest diameter requirements at a fixed 5∘C evaporator temperature and 40∘C condenser temperature for a given range of cooling load. Both primary and secondary refrigerants flow rates are higher for R1234yf followed by R134a and then R152a.

scholarly journals Performance Assessment of Solar Cooling Systems with Energy Storage

2021 ◽  
Vol 312 ◽  
pp. 08014
Author(s):  
Giovanni Brumana ◽  
Giuseppe Franchini ◽  
Elisa Ghirardi
Keyword(s):  
Cooling System ◽  
Evaporative Cooling ◽  
Optimal Size ◽  
Ambient Conditions ◽  
Absorption Chiller ◽  
Cooling Systems ◽  
Detailed Model ◽  
Adsorption Chiller ◽  
Solar Cooling ◽  
Evaporative Cooling System

The paper presents a complete solar cooling comparison. A detailed model of a tertiary sector building has been evaluated in three locations (Riyadh, Abu Dhabi, and Palermo) and coupled with four solar cooling systems: two solar thermal cooling systems (Li-Br absorption chiller and adsorption chiller), a solar Desiccant Evaporative Cooling system and a solar electric cooling (Photovoltaic coupled with Compression chiller). A multi-variable optimization procedure selects the optimal size of each component. The results show that the solar cooling system based on absorption chiller satisfied the cooling demand regardless of the site location whilst the performance of the Desiccant Evaporative Cooling system is dramatically affected by ambient conditions. The electric solar cooling option shows the best overall efficiency and appears a costeffective solution despite the high cost of the storage system.

Development of an Improved Desiccant-Based Evaporative Cooling System for Gas Turbines

2008 ◽  
Author(s):  
Amir Abbas Zadpoor ◽  
Ali Asadi Nikooyan
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Climatic Conditions ◽  
Cooling Systems ◽  
Actual Performance ◽  
Evaporative Cooling System ◽  
Industrial Gas Turbine ◽  
Gas Turbine Cycle

The evaporative inlet cooling systems used for inlet cooling of gas turbines during hot summers do not work well in humid areas. However, desiccant wheels can be used to dehumidify the air before passing it trough the evaporative cooler. Since the desiccant wheels work adiabatically, the resulting air is hotter than the air introduced to the wheel and an evaporative cooling system is used to cool down the dehumidified air. Combined direct and indirect evaporative coolers have been already used to investigate the effects of dehumidification on the effectiveness of the evaporation cooling systems. It is shown that a single desiccant wheel does not offer much higher effectiveness compared to the multiple-stage evaporative systems. In this paper, an improved version of the desiccant inlet cooling system is presented. Additional dehumidification and indirect evaporative cooling stages are added to increase the effectiveness of the inlet cooling. A typical gas turbine cycle along with an industrial gas turbine with actual performance curves are used to simulate the thermal cycle in presence of the different inlet cooling systems. The simulations are carried out for three different climatic conditions. The improved and original desiccant-based systems are compared and it is shown that the added stages substantially improve the effectiveness of the desiccant-based inlet cooling.

Solar Assisted Desiccant Cooling Simulation for Different Climate Zones

2011 ◽  
Author(s):  
Wendell Concina ◽  
Suresh Sadineni ◽  
Robert Boehm
Keyword(s):  
Air Conditioning ◽  
Cooling System ◽  
Evaporative Cooling ◽  
The United States ◽  
Economic Benefits ◽  
Climatic Conditions ◽  
Hot Water ◽  
Low Grade ◽  
Cooling Systems ◽  
Climate Zones

Evaporative cooling is among the most cost effective methods of air conditioning, but is less efficient in humid climates. An evaporative system coupled with a desiccant wheel can operate effectively in broader climatic conditions. These cooling systems can substitute traditional vapor compression air conditioning systems as they involve environmentally friendly cooling processes with reduced electricity demand (which is commonly generated from fossil fuels) along with no harmful CFC based refrigerant usage. Furthermore, direct utilization of low grade energy sources such as solar thermal energy or flue gas heat can drive the desiccant regeneration process, thus providing economic benefits. This study presents the results of simulations of desiccant cooling system performance for different climate zones of the United States. Solar assisted desiccant air conditioning is particularly useful where there are abundant solar resources with high temperature and humidity levels. Building energy simulations determined cooling energy requirements for the building. Simulation of an evacuated solar hot water collector model provided the heat energy available for regeneration of the desiccant. Solid desiccant of common material such as silica gel used in a rotary wheel is simulated using established validated computer models; this is coupled with evaporative cooling. Transients of the overall system for different cooling loads and solar radiation levels are presented. Finally, feasibility studies of the desiccant cooling systems are presented in comparison with traditional cooling system. Further analysis of the data presents optimization opportunities. Energy savings were achieved in all climatic conditions with decreased effectiveness in more humid conditions.

Systematic Assessment of Combustion Turbine Inlet Air-Cooling Techniques

2005 ◽  
Vol 127 (1) ◽  
pp. 159-169 ◽  
Author(s):  
Abdalla M. Al-Amiri ◽  
Montaser M. Zamzam
Keyword(s):  
Air Temperature ◽  
Evaporative Cooling ◽  
Heat Rate ◽  
Climatic Conditions ◽  
Coefficient Of Performance ◽  
Air Cooling ◽  
Cooling Systems ◽  
Turbine Inlet ◽  
Wide Range ◽  
The Impact

The current study is centered on assessing the benefits of incorporating combustion turbine inlet air-cooling systems into a reference combustion turbine plant, which is based on a simple cycle under base load mode. Actual climatic conditions of a selected site were examined thoroughly to identify the different governing weather patterns. The main performance characteristics of both refrigerative and evaporative cooling systems were explored by examining the effect of several parameters including inlet air temperature, airflow-to-turbine output ratio, coefficient of performance (for refrigerative cooling systems), and evaporative degree hours (for evaporative cooling systems). The impact of these parameters was presented against the annual gross energy increase, average heat rate reduction, cooling load requirements and net power increase. Finally, a feasibility design chart was constructed to outline the economic returns of employing a refrigerative cooling unit against different prescribed inlet air temperature values using a wide range of combustion turbine mass flow rates.

Sign in / Sign up

Export Citation Format

Share Document