scholarly journals Numerical investigations of solar-assisted hybrid desiccant evaporative cooling system for hot and humid climate

2020 ◽  
Vol 12 (6) ◽  
pp. 168781402093499
Author(s):  
Shafqat Hussain ◽  
Abdulrahim Kalendar ◽  
Muhammad Zeeshan Rafique ◽  
Patrick Oosthuizen
Keyword(s):  
Relative Humidity ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Coefficient Of Performance ◽  
Cooling Load ◽  
Vapor Compression ◽  
Humid Climate ◽  
Numerical Investigations ◽  
Evaporative Cooling System

This article presents numerical investigations of the solar-assisted hybrid desiccant evaporative cooling system integrated with standard air collectors for applications under the hot and humid climatic conditions of Kuwait city. The objective is to introduce the energy-efficient and carbon-free solar-assisted hybrid desiccant evaporative cooling system to alleviate the principal problems of electricity consumption and carbon emissions resulting from the use of the conventional vapor-compression cooling systems. In the normal building, during cooling load operation, the solar-assisted hybrid desiccant evaporative cooling system can cope with the cooling load particularly sensible by evaporative cooling and latent through desiccant dehumidification. The outcomes of this work indicate that solar-assisted hybrid desiccant evaporative cooling device integrated with air collectors is capable of providing average coefficient of performance of 0.85 and has the potential to provide cooling with energy saving when compared with conventional vapor-compression refrigeration systems. It was concluded that under the intense outdoor environmental conditions (ambient air at greater than 45°C and 60% relative humidity), the delivered supply air from the evaporative cooling was nearly at 27°C and 65% relative humidity. To solve this problem, the system was assisted with conventional cooling coil (evaporator of heat pump) to supply air at comfortable conditions in the conditioned space.

scholarly journals Alternative Air-Conditioning Options for Developing Countries

2017 ◽  
Vol 2 (1) ◽  
pp. 76 ◽  
Author(s):  
Muhammad Kashif ◽  
Muhammad Sultan ◽  
Zahid Mahmood Khan
Keyword(s):  
Developing Countries ◽  
Air Conditioning ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Ambient Air ◽  
Climatic Conditions ◽  
Individual Characteristics ◽  
Coefficient Of Performance ◽  
Air Conditioning System ◽  
Evaporative Cooling System

This study assesses the potential selection of efficient air-conditioning (AC) and cooling systems in order to avoid excess power consumption, mitigation of harmful refrigerants generated by the existing AC systems. Several varieties of active and passive air-conditioning systems i.e. heating ventilating air-conditioning (HVAC), vapor compression air-conditioning (VCAC) conventional direct evaporative cooling (DEC) and indirect evaporative cooling (IEC)  and desiccant air-conditioning (DAC) systems are under practice for the cooling and dehumidification. The storage of agricultural products mainly based on product individual characteristics i.e. respiration rate, transpiration rate and moisture content of that product. Variant ambient air conditions and the type of application are the main parameters for the choice of air-conditioning system to get optimum performance. The DAC system subsidize the coefficient of performance (COP) in humid regions, coastal ranges of developing countries e.g. Karachi and Gawadar (Pakistan) with hot humid climatic conditions. In similar way, hottest regions of the country such as Sibbi, Jacobabad and Multan perform better results when incorporates with M-cycle evaporative cooling system. Variation in ambient air conditions directly affect the cooling load and the choice of sustainable air-conditioning system

scholarly journals Experimental Investigation of Thermal Performance of Aluminum Foil Coated with Polyester in a Direct Evaporative Cooling System

2021 ◽  
Vol 27 (4) ◽  
pp. 1-15
Author(s):  
Abbas Magid Taleb ◽  
Mohammed Abdulraouf Nima
Keyword(s):  
Experimental Study ◽  
Experimental Investigation ◽  
Relative Humidity ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Aluminum Foil ◽  
Adiabatic Process ◽  
Direct Evaporative Cooling ◽  
Evaporative Cooling System ◽  
Positive Impression

An experimental study was carried out for an evaporative cooling system in order to investigate the effect of using an aluminum pad coated with fabric polyester. In the present work, it was considered to use a new different type of cooling medium and test its performance during the change in the wet-bulb temperature and dry-bulb temperature of the supply air outside of the pad, the relative humidity of the supply air, the amount of air supplied (300-600) CFM and also the change of the amount of circulated water (1.75, 2.5, 4.5) liter per minute. A decrease in the WBT of the air was obtained, whereas the WBT of the air entering the pad was 26.5 . In contrast, the WBT of the outside air had reached 23  even though evaporative cooling is an adiabatic process which makes the WBT of the air that comes out of the pad is equal to the entering air WBT. The decrease in DBT is by changing the amount of air and water passing through the aluminum pad, whereas the DBT of the air entering the pad was 45 , while the DBT of the outside air had reached 29 . Also, an essential thing was obtained as this rise in the relative humidity of the air is very small 57%RH compared to the conventional pads, and this gives a positive impression as the air supplied from this pad has less moisture and its ability to carry moisture is much higher than that of air supplied from other pads. This gives a positive impression because the air supplied from this pad has lower humidity and its ability to hold moisture much higher than the air supplied from other traditional pads.

scholarly journals Energy-Based Performance Analysis of a Sustainable Farming Compartment with Evaporative Cooling System

2018 ◽  
Author(s):  
M. Sina Mousavi ◽  
Siamak Mirfendereski ◽  
Jae Sung Park ◽  
Jongwan Eun
Keyword(s):  
Relative Humidity ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Experimental Results ◽  
Treated Wastewater ◽  
Total Power ◽  
Field Site ◽  
Sustainable Farming ◽  
Total Power Consumption ◽  
Evaporative Cooling System

The United Arab Emirates (UAE) is significantly dependent on desalinated water and groundwater resource, which is expensive and highly energy intensive. Despite the scarce water resource, only 54% of the recycled water was reused in 2015. In this study, an “Oasis” complex comprised of Sustainable Farming Compartments (SFCs) was proposed for reusing treated wastewater to decrease the ambient temperature of the SFC via an evaporative cooling system. A prototype SFC with half the original scale (width = 1.8 m, depth = 1.5 m, front height = 1.2 m back height = 0.9 m) was designed, built, and tested in an environmentally controlled laboratory and field site to evaluate the feasibility and effectiveness of the SFC under the climatic conditions in Abu Dhabi. Based on the experimental results, the temperature drops obtained from the SFC in the laboratory and field site were 5 ̊C at initial relative humidity of 60% and 7- 15 ̊C at initial relative humidity of 50%, respectively. An energy simulation using dynamic numerical simulations was performed in comparison to the results of the experiment. The energy-based dynamic simulation shows good agreement with the experimental results. The total power consumption of the SFC system was approximately three and a half times lower than that of an electrical air conditioner.

Experimental Study on Effect of Meteorologic Parameters on Evaporative Cooling System Performance

2014 ◽  
Vol 1070-1072 ◽  
pp. 1998-2001
Author(s):  
Xiao Feng Zhou ◽  
Xiao Ping Miao ◽  
Jun Yang ◽  
Feng Jiang
Keyword(s):  
Energy Consumption ◽  
Relative Humidity ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Real Data ◽  
Linear Quadratic ◽  
Consumption Ratio ◽  
Quadratic Surface ◽  
Evaporative Cooling System ◽  
Energy Consumption Ratio

Based on experimental platform of the evaporative cooling system and a large number of experimental data, the influence of air relative humidity and dry bulb temperature on the energy consumption ratio (ECR) of the evaporative condenser is studied. Resorting to the test data, linear, quadratic and cubic fitting surfaces are used to get the function of energy consumption ratio with two variables, dry bulb temperature and relative humidity. The fitting and validation results show that the quadratic surface approaches the real data best among the three manners.

Enhancing the Performance of the Building’s Vapor Compression Air Cooling System Using Earth-Air Heat Exchanger

2017 ◽  
Author(s):  
Fadi A. Ghaith ◽  
Fadi J. Alsouda
Keyword(s):  
Heat Exchanger ◽  
Soil Temperature ◽  
Air Temperature ◽  
Cooling System ◽  
Ambient Air ◽  
Coefficient Of Performance ◽  
Maximum Deviation ◽  
Air Cooling ◽  
Vapor Compression ◽  
Air Cooling System

This paper aims to evaluate the thermal performance and feasibility of integrating the Earth-Air Heat Exchanger (EAHE) with the building’s vapor compression air cooling system. In the proposed system, the ambient air is forced by an axial fan through an EAHE buried at a certain depth below the ground surface. EAHE uses the subsoil low temperature and soil thermal properties to reduce the air temperature. The outlet air from the EAHE was used for the purpose of cooling the condenser of the vapor compression cycle (VCC) to enhance its coefficient of performance (COP). The potential enhancement on the COP was investigated for two different refrigerants (i.e. R-22 and R410a) cooling systems. A mathematical model was developed to estimate the underground soil temperature at different depths and the corresponding outlet air temperature of EAHE was calculated. The obtained results showed that the soil temperature in Dubai at 4 meters depth is about 27°C and remains relatively constant across the year. In order to estimate the effect of using EAHE on the performance of the VCC system, a sample villa project was selected as a case study. The obtained results showed that EAHE system contributed efficiently to the COP of the VCC with an overall increase of 47 % and 49 % for R-22 and R410a cycles, respectively. Moreover, the calculated values were validated against Cycle_D simulation model and showed good agreement with a maximum deviation of 5%. The payback period for this project was found to be around two years while the expected life time is about 10 years which makes it an attractive investment.

scholarly journals Performance of Desiccant Enhanced Evaporative Cooling System Based on High-Low Control

Proceedings ◽  
2018 ◽  
Vol 2 (22) ◽  
pp. 1377
Author(s):  
Yi Chen ◽  
Huaxia Yan ◽  
Yimo Luo
Keyword(s):  
High Speed ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Research Work ◽  
Ambient Air ◽  
High Dependency ◽  
Humid Region ◽  
Evaporative Cooling System ◽  
Evaporative Cooler ◽  
Secondary Air

Desiccant enhanced evaporative cooling system is a sustainable air-conditioning (A/C) system which deals the latent load and sensible load separately by a dehumidifier and an evaporative cooler. A LDD-RIEC system consists of a liquid desiccant dehumidifier (LDD) and a regenerative indirect evaporative cooler (RIEC) were investigated. The LDD-RIEC system is characterized by low energy consumption compared with conventional mechanical cooling system, but the main shortcoming is the high dependency on ambient air conditions. To maintain stable indoor temperature, a control scheme is essential. However, very limited research work regarding control strategy can be found in open literatures. In this paper, a novel controller named high-low (H-L) control is proposed. Multi-speed technology is utilized for primary air fan and secondary air fan operating either at high speed or at low speed. The annual performance of a LDD-RIEC system is simulated in Hong Kong, a typical hot and humid region. The results indicate that H-L control is effective in maintaining stable indoor thermal comfort with temperature fluctuation from 24 °C to 27 °C for 99% of time.

Design, Construction, and Performance Evaluation of an Evaporative Cooling System for Tomatoes Storage

2020 ◽  
Vol 24 (4) ◽  
pp. 1-12
Author(s):  
Edward A. Awafo ◽  
Samuel Nketsiah ◽  
Mumin Alhassan ◽  
Ebenezer Appiah-Kubi
Keyword(s):  
Relative Humidity ◽  
Cooling System ◽  
Storage System ◽  
Evaporative Cooling ◽  
Ambient Conditions ◽  
Data Logger ◽  
Significant Difference ◽  
Jute Sack ◽  
Tomato Processing ◽  
Evaporative Cooling System

AbstractAn evaporative cooling system was designed and constructed to increase the shelf life of stored vegetables. The evaporative cooler was tested and evaluated using freshly harvested roma tomatoes. The equipment operates on the principle of evaporative cooling which increased the relative humidity and decreased temperature in the preservation chamber. The storage system was made up of wood of 25.4 mm thickness. A side of the system is made of jute sack, which was moistened with water flowing through a series of perforated pipes from a reservoir located at the top of the storage system. The water flowed under gravity. The relative humidity and temperature of the tomatoes were analyzed using tinytag humidity, temperature data logger. The weight loss of the tomatoes was also analyzed using a dial gauge scale. The results revealed that there was significant difference in using the evaporative cooling system for storing tomatoes as compared to ambient conditions. The average cooling efficiency was found to be 81%. The average temperature achieved in the cooling system dropped to an average of 23℃ when compared to the average ambient temperature of 33℃, and the relative humidity also increased up to 99% when compared to the average ambient of 59%. The analysis of the evaporative cooling system showed that tomatoes can be stored for more than 6 days with negligible changes in weight, colour and firmness as compared to those under ambient condition, which deteriorated after day 3. The evaporative cooling system was found to be effective and hence can be used by farmers, households, and tomato processing factories for short term storage of fresh tomatoes.

scholarly journals Analysis of the Performance of a Passive Downdraught Evaporative Cooling System Driven by Solar Chimneys in a Residential Building by Using an Experimentally Validated TRNSYS Model

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3486
Author(s):  
Andrés Soto ◽  
Pedro Martínez ◽  
Victor M. Soto ◽  
Pedro J. Martínez
Keyword(s):  
Natural Ventilation ◽  
Energy Savings ◽  
Cooling System ◽  
Evaporative Cooling ◽  
Residential Building ◽  
Climatic Conditions ◽  
Cold Climate ◽  
Humid Climate ◽  
Combined Model ◽  
Evaporative Cooling System

Natural ventilation, combined with a passive cooling system, can provide significant energy savings in the refrigeration of indoor spaces. The performance of these systems is highly dependent on outdoor climatic conditions. The objective of this study was to analyse the feasibility of a passive, downdraught, evaporative cooling system driven by solar chimneys in different climatic zones by using an experimentally validated simulation tool. This tool combined a ventilation model and a thermal model of the dwelling in which an empirical model of a direct evaporative system made of plastic mesh was implemented. For experimental validation of the combined model, sensors were installed in the dwelling and calibrated in the laboratory. The combined model was applied to Spanish and European cities with different climates. In the simulation, values of cooling energy per volume of air ranging between 0.53 Wh/m3 and 0.79 Wh/m3 were obtained for Alicante (hot climate with moderate humidity) and Madrid (hot and dry climate), respectively. In these locations, medium and high applicability was obtained, respectively, in comparison with Burgos (cold climate with moderate humidity) and Bilbao (cold and humid climate), which were low. The evaluation of the reference building in each location allowed establishing a classification in terms of performance, comfort and applicability for each climate.

Sign in / Sign up

Export Citation Format

Share Document