scholarly journals Self-Healing Potential of Geopolymer Concrete

Proceedings ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 6
Author(s):  
Rajczakowska ◽  
Habermehl-Cwirzen ◽  
Hedlund ◽  
Cwirzen
Keyword(s):  
Building Materials ◽  
Crack Opening ◽  
Healing Process ◽  
Activation Parameters ◽  
Optical Microscope ◽  
Bending Test ◽  
Geopolymer Concrete ◽  
Self Healing ◽  
Lime Water ◽  
Activated Slag

Waste management is emerging as one of the most troublesome and critical problems of the upcoming decades. Therefore, the utilization of industrial by-products as building materials components has been widely studied in recent years. Geopolymer concrete, with binder entirely substituted by slag or fly ash, is one of the materials, which combines positive environmental impact with satisfying mechanical parameters. Although various properties of geopolymers have been examined, the autogeneous self-healing potential of this alternative binder has not been thoroughly verified yet. This paper aims to validate whether geopolymer concrete made of alkali activated slag is capable of self-repair. Four different mortar mixes with two types of slag and varying activation parameters were investigated. The polyvinyl alcohol (PVA) fibers were added in order to control the crack width. The 1.2 × 1.2 × 6 cm beams were pre-cracked with the use of three point bending test at 7 days after casting to achieve crack opening of approximately 300 µm. The effects of various exposure conditions on the healing process were examined, i.e., lime water, different sodium silicate solutions and water. The self-healing efficiency as well as the evolution of the crack recovery was assessed by the observation of the crack surface with the use of digital optical microscope. The healed area of the crack was calculated and compared for all the specimens by applying the image processing techniques. The morphology of the healing products as well as their chemical composition were examined with the use of Scanning Electron Microscope with Energy Dispersive Spectroscopy.

scholarly journals Review on Performance Evaluation of Autonomous Healing of Geopolymer Composites

2021 ◽  
Vol 6 (7) ◽  
pp. 94
Author(s):  
Salmabanu Luhar ◽  
Ismail Luhar ◽  
Faiz Uddin Ahmed Shaikh
Keyword(s):  
Healing Process ◽  
Construction Materials ◽  
Geopolymer Concrete ◽  
Self Healing ◽  
Concrete Technology ◽  
Internal Factors ◽  
Microbial Carbonate ◽  
Precipitation Medium ◽  
Pass Through

It is a universal fact that concrete is one of the most employed construction materials and hence its exigency is booming at a rocket pace, which in turn, has resulted in a titanic demand of ordinary Portland cement. Regrettably, the production of this essential binder of concrete is not merely found to consume restricted natural resources but also found to be associated with emission of carbon dioxide—a primary greenhouse gas (GHG) which is directly answerable to earth heating, resulting in the gigantic dilemma of global warming. Nowadays, in order to address all these impasses, researchers are attracted to innovative Geopolymer concrete technology. However, crack development of various sizes within the concrete is inevitable irrespective of its kind, mix design, etc., owing to external and internal factors viz., over-loading, exposure to severe environments, shrinkage, or error in design, etc., which need to be sealed otherwise these openings permits CO2, water, fluids, chemicals, harmful gases, etc., to pass through reducing service life and ultimately causing the failure of concrete structures in the long term. That is why instant repairs of these cracks are essential, but manual mends are time-consuming and costly too. Hence, self-healing of cracks is desirable to ease their maintenances and repairs. Self-healing geopolymer concrete (SHGPC) is a revolutionary product extending the solution to all these predicaments. The present manuscript investigates the self-healing ability of geopolymer paste, geopolymer mortar, and geopolymer concrete—a slag-based fiber-reinforced and a variety of other composites that endow with multifunction have also been compared, keeping the constant ratio of water to the binder. Additionally, the feasibility of bacteria in a metakaolin-based geopolymer concrete for self-healing the cracks employing Bacteria-Sporosarcina pasteurii, producing Microbial Carbonate Precipitations (MCP), was taken into account with leakage and the healing process in a precipitation medium. Several self-healing mechanisms, assistances, applications, and challenges of every strategy are accentuated, compared with their impacts as a practicable solution of autogenously-healing mechanisms while active concretes are subjected to deterioration, corrosion, cracking, and degradation have also been reviewed systematically.

scholarly journals Development of an Innovative Urease-Aided Self-Healing Dental Composite

Catalysts ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 84
Author(s):  
Mostafa Seifan ◽  
Zahra Sarabadani ◽  
Aydin Berenjian
Keyword(s):  
Healing Process ◽  
Optical Microscope ◽  
Dental Restoration ◽  
Dental Composite ◽  
Dental Composites ◽  
Resin Matrix ◽  
Self Healing ◽  
Urease Enzyme ◽  
Near Future ◽  
Dental Restorative

Dental restorative materials suffer from major drawbacks, namely fracture and shrinkage, which result in failure and require restoration and replacement. There are different methods to address these issues, such as increasing the filler load or changing the resin matrix of the composite. In the present work, we introduce a new viable process to heal the generated cracks with the aid of urease enzyme. In this system, urease breaks down the salivary urea which later binds with calcium to form calcium carbonate (CaCO3). The formation of insoluble CaCO3 fills any resultant fracture or shrinkage from the dental composure hardening step. The healing process and the formation of CaCO3 within dental composites were successfully confirmed by optical microscope, scanning electron microscopy (SEM), and energy-dispersive X-ray (EDS) methods. This research demonstrates a new protocol to increase the service life of dental restoration composites in the near future.

Silver nanowire loaded self-healing EVA films

2020 ◽  
pp. 089270572096216
Author(s):  
Ayse Sezer Hicyilmaz ◽  
Ayse Celik Bedeloglu
Keyword(s):  
Healing Process ◽  
Composite Films ◽  
Ethylene Vinyl Acetate ◽  
Nucleating Agent ◽  
Optical Microscope ◽  
Mechanical Tests ◽  
Healing Time ◽  
Silver Nanowire ◽  
Nanocomposite Films ◽  
Self Healing

In this study, ethylene vinyl acetate (EVA) transparent nanocomposite films, which heal easily with the inclusion of a low amount of silver nanowire (AgNw), were produced. For this purpose, first AgNw was homogeneously dispersed in the polymer solution and then, nanocomposite films were produced from the solutions by casting method. The thermal, mechanical and optical properties of the produced films were characterized. Self-healing properties of nanocomposite films were confirmed by optical microscopy and mechanical tests. Optical microscope results showed that the optimum recovery temperature was 130°C and the addition of a small amount (5% w/w) of AgNw reduced the recovery time of the scratch on EVA film reducing the healing time by 66.66% (from 15 minutes to 5 minutes). In addition, tensile test results supported the optical microscope results. DSC results showed that the regular crystal regions were formed in composite films due to the high thermal conductivity and nucleating agent effect of AgNw. On the other hand, DSC curves proved that the healing process was occurred via re-entanglement of the polymer chains by heat effect, while silver nanowire addition did not affect the mechanical strength and transparency of the films, significantly. AgNw-loaded-EVA-based self-healing transparent films can be used for applications such as tempered glass laminates, electrical cables, coatings, packages, especially to protect the product and reduce the cost of repair.

scholarly journals Self-healing cement materials – microscopic techniques

2020 ◽  
Vol 19 (2) ◽  
pp. 033-040
Author(s):  
Marta Dudek
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Healing Process ◽  
Optical Microscope ◽  
Cementitious Materials ◽  
Self Healing ◽  
Advantages And Disadvantages ◽  
Before And After ◽  
Scanning Electron

The article presents a general classification of intelligent materials with self-healing (self-repairing) properties, focusing on self-healing cementitious materials. The purpose of the paper is to describe the prospects of two of the most popular micro-observation techniques, i.e. with the use of an optical and scanning electron microscope. In addition, it describes the advantages of using a tensile stage mounted in the microscope chamber for testing self-healing materials. The advantages and disadvantages of these devices have been characterized, and the results of preliminary research have been provided. The tests include the optical microscopy and scanning electron microscopy observations of the microstructure of cracks before and after the process of healing. They were carried out using ZEISS Discovery V20 optical microscope and ZEISS EVO-MA 10 scanning electron microscope on mortar samples modified with macro capsules filled with polymer. In addition to observations, chemical analysis was performed with the use of an EDS detector. The microscopic observations and chemical analyses provide the basis for assessing the effectiveness of the self-healing process, showing that the crack has been healed. Moreover, the preliminary results of the tests of micro-mechanical properties, carried out with the use of a tensile stage, have been described. The problems of using this research technique are also listed. This study shows the usefulness of this kind of tests for microcapsules for self-healing materials.

Crack Initiation of Alkali-Activated Slag Based Composites with Graphite Filler

2018 ◽  
Vol 761 ◽  
pp. 57-60
Author(s):  
Hana Šimonová ◽  
Libor Topolář ◽  
Pavel Rovnaník ◽  
Pavel Schmid ◽  
Zbyněk Keršner
Keyword(s):  
Crack Initiation ◽  
Crack Propagation ◽  
Building Materials ◽  
Crack Opening ◽  
Graphite Powder ◽  
Unstable Crack ◽  
Alkali Activated Slag ◽  
Fracture Tests ◽  
Activated Slag ◽  
Alkali Activated

The alkali-activated slag is an alternative building material to ordinary Portland cement based materials. This type of material is effective in reducing CO2 emissions and energy consumption. Addition of graphite powder increases its electric conductivity, hence, introducing new functionality to building materials such as self-sensing and self-heating properties. In this study, the effect of graphite filler on the crack initiation of alkali-activated slag composite is investigated. The graphite powder was added in the amount of 5, 10 and 15% with respect to the slag mass. Beam specimens with an initial stress concentrator were tested in three-point bending at the age of 28 days. The load versus crack mouth crack opening displacement (F–CMOD) diagrams were recorded during the fracture tests and subsequently evaluated using the Double-K fracture model. This model allows the quantification of two different levels of crack propagation: initiation, which corresponds to the beginning of stable crack growth, and the level of unstable crack propagation. The course of fracture tests was also monitored by acoustic emission (AE) method.

scholarly journals Injectable Self-Healing Adhesive pH-Responsive Hydrogels Accelerate Gastric Hemostasis and Wound Healing

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Jiahui He ◽  
Zixi Zhang ◽  
Yutong Yang ◽  
Fenggang Ren ◽  
Jipeng Li ◽  
...  
Keyword(s):  
Wound Healing ◽  
Endoscopic Treatment ◽  
Healing Process ◽  
Gelation Time ◽  
Type I ◽  
Self Healing ◽  
Ph Responsive ◽  
Gastric Hemorrhage ◽  
Wound Model ◽  
Arterial Bleeding

AbstractEndoscopic mucosal resection (EMR) and endoscopic submucosal dissection (ESD) are well-established therapeutics for gastrointestinal neoplasias, but complications after EMR/ESD, including bleeding and perforation, result in additional treatment morbidity and even threaten the lives of patients. Thus, designing biomaterials to treat gastric bleeding and wound healing after endoscopic treatment is highly desired and remains a challenge. Herein, a series of injectable pH-responsive self-healing adhesive hydrogels based on acryloyl-6-aminocaproic acid (AA) and AA-g-N-hydroxysuccinimide (AA-NHS) were developed, and their great potential as endoscopic sprayable bioadhesive materials to efficiently stop hemorrhage and promote the wound healing process was further demonstrated in a swine gastric hemorrhage/wound model. The hydrogels showed a suitable gelation time, an autonomous and efficient self-healing capacity, hemostatic properties, and good biocompatibility. With the introduction of AA-NHS as a micro-cross-linker, the hydrogels exhibited enhanced adhesive strength. A swine gastric hemorrhage in vivo model demonstrated that the hydrogels showed good hemostatic performance by stopping acute arterial bleeding and preventing delayed bleeding. A gastric wound model indicated that the hydrogels showed excellent treatment effects with significantly enhanced wound healing with type I collagen deposition, α-SMA expression, and blood vessel formation. These injectable self-healing adhesive hydrogels exhibited great potential to treat gastric wounds after endoscopic treatment.

scholarly journals Life cycle assessment of self-healing geopolymer concrete

2021 ◽  
pp. 100147
Author(s):  
Jerome Ignatius T. Garces ◽  
Ithan Jessemar Dollente ◽  
Arnel B. Beltran ◽  
Raymond R. Tan ◽  
Michael Angelo B. Promentilla
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Geopolymer Concrete ◽  
Self Healing

scholarly journals Application of GGBFS and Bentonite to Auto-Healing Cracks of Cement Paste

2018 ◽  
Vol 1 (1) ◽  
pp. 38 ◽  
Author(s):  
J J Ekaputri ◽  
M S Anam ◽  
Y Luan ◽  
C Fujiyama ◽  
N Chijiwa ◽  
...  
Keyword(s):  
Cement Paste ◽  
Surface Crack ◽  
Crack Width ◽  
Healing Process ◽  
Crack Depth ◽  
The Self ◽  
External Loading ◽  
Self Healing ◽  
Carbonation Reaction ◽  
Granulated Blast Furnace Slag

Cracks are caused by many factors. Shrinkage and external loading are the most common reason. It becomes a problem when the ingression of aggressive and harmful substance penetrates to the concrete gap. This problem reduces the durability of the structures. It is well known that self – healing of cracks significantly improves the durability of the concrete structure. This paper presents self-healing cracks of cement paste containing bentonite associated with ground granulated blast furnace slag. The self-healing properties were evaluated with four parameters: crack width on the surface, crack depth, tensile strength recovery, and flexural recovery. In combination with microscopic observation, a healing process over time is also performed. The results show that bentonite improves the healing properties, in terms of surface crack width and crack depth. On the other hand, GGBFS could also improve the healing process, in terms of crack depth, direst tensile recovery, and flexural stiffness recovery. Carbonation reaction is believed as the main mechanism, which contributes the self-healing process as well as the continuous hydration progress.

Sign in / Sign up

Export Citation Format

Share Document