scholarly journals Use of Families of Euphorbiaceae for the Production of Biodiesel in Semiarid Areas

Proceedings ◽  
2021 ◽  
Vol 52 (1) ◽  
pp. 2
Author(s):  
Noé Anes García ◽  
Antonio Luis Marqués Sierra

In recent years, developments made to reduce the consequences generated using petroleum products have been strengthening; therefore, biofuels have become a requirement in different countries worldwide with the objective of reducing not only the high levels of current pollution, but also mitigating the effects generated by global warming. Despite the advances that have been made in the field of research on Jatropha, it is still necessary to carry out more detailed studies aimed at achieving a better use of it, identifying the influence of its physical–chemical properties in terms of quality levels, as well as determining its behavior when mixed with palm oil to achieve a biodiesel with better yields, whose impact will be reflected mainly in the environmental field, helping to mitigate the production of greenhouse gases that are produced by petroleum products. Although currently the biofuels sector has made important advances in research, it is necessary to deepen the physical–chemical analyses both in the production and storage processes of biodiesel, so that in the future it can be fully fulfilled with the energy requirements that are currently only achieved with fossil fuels, so it is necessary to direct this research toward the development of new products with improved characteristics, especially when exposed to prolonged storage times and low temperatures.

2016 ◽  
Vol 721 ◽  
pp. 154-158
Author(s):  
Edmunds Lodins ◽  
Inga Pudze ◽  
Ineta Rozenstrauha ◽  
Linda Krage

This work focuses on pellets made by Latvian industrial waste (waste cullet glass, sewage sludge, metallurgical slag and alumina scrap metal processing waste and raw mineral materials (limeless clay) to gain high porosity and water sorptiom. Iron sorption using ceramic pellets is explored more detailed. Physical-chemical properties and microstructure were researched to obtain a deeper understanding of how these qualities affect water purification from iron compounds. Three pellets with different properties were made in this paper : B5, A5 and E1. Composition B5 indicates highest iron sorption rate at sintering temperature 1100 °C and shows considerable iron reduction in a solution after one week.


2020 ◽  
Vol 3 (1) ◽  
pp. 85
Author(s):  
Dunja Zoe Powroschnik ◽  
Emanuel Rangel Spadim ◽  
Humberto Jesus Eufrade-Junior ◽  
Elaine Cristina Leonello ◽  
Saulo Philipe Sebastião Guerra

The use of natural resources as an energy source is a well-studied alternative to fossil fuels. Some studies present bamboo as promising biomass for energy generation, and its transformation into briquettes can be a way to take advantage of its production residues. This study’s objective was to determine the physical and chemical properties of two bamboo ages (two and seven years old) of Bambusa vulgaris species to evaluate biomass quality and its briquettes for energy generation. Regarding the higher heating value, there was no difference between treatments means values, which were 17.8 and 18.2 MJ kg−1 for two and seven years old, respectively, and these values were slightly below those found in the literature for Bambusa spp. The mechanical durability was of low quality for both treatments at the testing conditions, so they are not recommended for briquette production. The proximate analysis results were quite near the literature and reinforce bamboo’s positive qualities for biofuel usage.


2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Abdul Rauf ◽  
Saba Maqbool ◽  
Muhammad Naeem ◽  
Adnan Aslam ◽  
Hamideh Aram ◽  
...  

Vanadium is a biologically active product with significant industrial and biological applications. Vanadium is found in a variety of minerals and fossil fuels, the most common of which are sandstones, crude oil, and coal. Topological descriptors are numerical numbers assigned to the molecular structures and have the ability to predict certain of their physical/chemical properties. In this paper, we have studied topological descriptors of vanadium carbide structure based on ev and ve degrees. In particular, we have computed the closed forms of Zagreb, Randic, geometric-arithmetic, and atom-bond connectivity (ABC) indices of vanadium carbide structure based on ev and ve degrees. This kind of study may be useful for understanding the biological and chemical behavior of the structure.


Author(s):  
Débora A. Alves ◽  
◽  
Cristiéle L. Contreira ◽  
Suelen N. da Silva ◽  
Forgiarini Juliana ◽  
...  

The effect of storage temperature on the physical-chemical properties of poultry rendering meals (PRM) of whole broiler carcasses was evaluated. Chemical parameters, oxidation and biogenic amines (BA) profiles were determined. A completely randomized design in a 2x4 factorial arrangement (two stored temperature: 26 ºC or 7 ºC; and four storage times: 0, 24, 48 and 72h before rendering) was used. PRM nutrient levels were within the acceptable ranges determined for animal byproducts in all treatments and they did not influence PRM acidity index or TBARS (P>0.05). The peroxide index of all PRM was higher than the acceptable limit (>10 meq/1000g) but did not cause a rancid odor. Lower total BA content was determined at 72 h of storage in PRMs from refrigerated carcasses. The nutrient composition of PRMs shows quality enough to possibly be utilized as a feedstuff. Additional studies are needed to establish the safety of these byproducts as feedstuffs. Keywords: biogenic amines, byproduct, feedstuff, nutritional composition


Sign in / Sign up

Export Citation Format

Share Document