Mapping Winter Wheat with Combinations of Temporally Aggregated Sentinel-2 and Landsat-8 Data in Shandong Province, China

Winter wheat is one of the major cereal crops in China. The spatial distribution of winter wheat planting areas is closely related to food security; however, mapping winter wheat with time-series finer spatial resolution satellite images across large areas is challenging. This paper explores the potential of combining temporally aggregated Landsat-8 OLI and Sentinel-2 MSI data available via the Google Earth Engine (GEE) platform for mapping winter wheat in Shandong Province, China. First, six phenological median composites of Landsat-8 OLI and Sentinel-2 MSI reflectance measures were generated by a temporal aggregation technique according to the winter wheat phenological calendar, which covered seedling, tillering, over-wintering, reviving, jointing-heading and maturing phases, respectively. Then, Random Forest (RF) classifier was used to classify multi-temporal composites but also mono-temporal winter wheat development phases and mono-sensor data. The results showed that winter wheat could be classified with an overall accuracy of 93.4% and F1 measure (the harmonic mean of producer’s and user’s accuracy) of 0.97 with temporally aggregated Landsat-8 and Sentinel-2 data were combined. As our results also revealed, it was always good to classify multi-temporal images compared to mono-temporal imagery (the overall accuracy dropped from 93.4% to as low as 76.4%). It was also good to classify Landsat-8 OLI and Sentinel-2 MSI imagery combined instead of classifying them individually. The analysis showed among the mono-temporal winter wheat development phases that the maturing phase’s and reviving phase’s data were more important than the data for other mono-temporal winter wheat development phases. In sum, this study confirmed the importance of using temporally aggregated Landsat-8 OLI and Sentinel-2 MSI data combined and identified key winter wheat development phases for accurate winter wheat classification. These results can be useful to benefit on freely available optical satellite data (Landsat-8 OLI and Sentinel-2 MSI) and prioritize key winter wheat development phases for accurate mapping winter wheat planting areas across China and elsewhere.

Download Full-text

Influence of Different Satellite Imagery on the Analysis of Riparian Leaf Density in a Mountain Stream

Remote Sensing ◽

10.3390/rs12203376 ◽

2020 ◽

Vol 12 (20) ◽

pp. 3376 ◽

Cited By ~ 1

Author(s):

Giovanni Romano ◽

Giovanni Francesco Ricci ◽

Francesco Gentile

Keyword(s):

Winter Wheat ◽

Satellite Imagery ◽

Vegetation Cover ◽

Riparian Vegetation ◽

Deciduous Forests ◽

Sensor Data ◽

Mountain Stream ◽

Landsat 8 ◽

Area Index ◽

Sentinel 2

In recent decades, technological advancements in sensors have generated increasing interest in remote sensing data for the study of vegetation features. Image pixel resolution can affect data analysis and results. This study evaluated the potential of three satellite images of differing resolution (Landsat 8, 30 m; Sentinel-2, 10 m; and Pleiades 1A, 2 m) in assessing the Leaf Area Index (LAI) of riparian vegetation in two Mediterranean streams, and in both a winter wheat field and a deciduous forest used to compare the accuracy of the results. In this study, three different retrieval methods—the Caraux-Garson, the Lambert-Beer, and the Campbell and Norman equations—are used to estimate LAI from the Normalized Difference Vegetation Index (NDVI). To validate sensor data, LAI values were measured in the field using the LAI 2200 Plant Canopy Analyzer. The statistical indices showed a better performance for Pleiades 1A and Landsat 8 images, the former particularly in sites characterized by high canopy closure, such as deciduous forests, or in areas with stable riparian vegetation, the latter where stable reaches of riparian vegetation cover are almost absent or very homogenous, as in winter wheat fields. Sentinel-2 images provided more accurate results in terms of the range of LAI values. Considering the different types of satellite imagery, the Lambert-Beer equation generally performed best in estimating LAI from the NDVI, especially in areas that are geomorphologically stable or have a denser vegetation cover, such as deciduous forests.

Download Full-text

Garlic and Winter Wheat Identification Based on Active and Passive Satellite Imagery and the Google Earth Engine in Northern China

Remote Sensing ◽

10.3390/rs12213539 ◽

2020 ◽

Vol 12 (21) ◽

pp. 3539

Author(s):

Haifeng Tian ◽

Jie Pei ◽

Jianxi Huang ◽

Xuecao Li ◽

Jian Wang ◽

...

Keyword(s):

Remote Sensing ◽

Winter Wheat ◽

Satellite Imagery ◽

Remote Sensing Data ◽

Northern China ◽

Google Earth ◽

Kappa Coefficient ◽

Landsat 8 ◽

Winter Crops ◽

Sentinel 2

Garlic and winter wheat are major economic and grain crops in China, and their boundaries have increased substantially in recent decades. Updated and accurate garlic and winter wheat maps are critical for assessing their impacts on society and the environment. Remote sensing imagery can be used to monitor spatial and temporal changes in croplands such as winter wheat and maize. However, to our knowledge, few studies are focusing on garlic area mapping. Here, we proposed a method for coupling active and passive satellite imagery for the identification of both garlic and winter wheat in Northern China. First, we used passive satellite imagery (Sentinel-2 and Landsat-8 images) to extract winter crops (garlic and winter wheat) with high accuracy. Second, we applied active satellite imagery (Sentinel-1 images) to distinguish garlic from winter wheat. Third, we generated a map of the garlic and winter wheat by coupling the above two classification results. For the evaluation of classification, the overall accuracy was 95.97%, with a kappa coefficient of 0.94 by eighteen validation quadrats (3 km by 3 km). The user’s and producer’s accuracies of garlic are 95.83% and 95.85%, respectively; and for the winter wheat, these two accuracies are 97.20% and 97.45%, respectively. This study provides a practical exploration of targeted crop identification in mixed planting areas using multisource remote sensing data.

Download Full-text

A RADIOMETRIC NORMALIZATION METHOD OF CONTROLLING NO-CHANGED SET (CNCS) FOR DIVERSE LANDCOVER USING MULTI-SENSOR DATA

ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences ◽

10.5194/isprs-archives-xlii-3-w10-863-2020 ◽

2020 ◽

Vol XLII-3/W10 ◽

pp. 863-870

Author(s):

L. T. Huang ◽

W. L. Jiao ◽

T. F. Long ◽

C. L. Kang

Keyword(s):

Remote Sensing ◽

Linear Relationship ◽

Land Surface ◽

Remote Sensing Data ◽

Normalization Method ◽

Sensor Data ◽

Landsat 8 ◽

Landsat 8 Oli ◽

Sensing Data ◽

Sentinel 2

Abstract. The accurate acquisition of land surface reflectance (SR) data determines the accuracy of ground objects recognition, classification and land surface parameter inversion using remote sensing data, which is the basis of remote sensing data application. In this study, a Control No-Changed Set (CNCS) radiometric normalization method is proposed to realize spectral information transformation of multi-sensor data, which is based on the Iteratively Reweighted Multivariate Alteration Detection (IR-MAD), and includes automatic selection and step-by-step optimization of no-change pixels. The No-Changed set (NC) is obtained by selecting the original no-change pixels between the target image and the reference image according to the linear relationship. In the obtained original no-change regions, IR-MAD rules with iterative control are used to fix the final no-change pixels, after regression modeling and calculation, the normalized images are obtained. The method is tested on multi-images from multi-sensors in three groups of experiments (GF-1 WFV and Landsat-8 OLI, GF-1 PMS and Sentinel-2 MSI, and Landsat-8 OLI and Sentinel-2 MSI) with different landcover areas. The results of radiometric normalization are evaluated qualitatively and quantitatively. The data of the three groups of experiments have a high correlation (correlation coefficient r values > 0.85), indicating that they can be used together as complementary data. The Root Mean Squared Error (RMSE) values calculate from the NC between the reference and normalized target images are much smaller than those between the reference and original target images. The radiometric colour composition effects, and the typical ground objects spectral reflective curves of the reference and normalized target images are very similar after radiometric normalization. These results indicate that the CNCS method considers the linear relationship of the no-change pixels and is effective, stable, and can be used to improve the consistency of SR of multi-images from multi-sensors.

Download Full-text

Mapping the Natural Distribution of Bamboo and Related Carbon Stocks in the Tropics Using Google Earth Engine, Phenological Behavior, Landsat 8, and Sentinel-2

Remote Sensing ◽

10.3390/rs12183109 ◽

2020 ◽

Vol 12 (18) ◽

pp. 3109 ◽

Cited By ~ 1

Author(s):

Manjunatha Venkatappa ◽

Sutee Anantsuksomsri ◽

Jose Alan Castillo ◽

Benjamin Smith ◽

Nophea Sasaki

Keyword(s):

Vegetation Index ◽

Google Earth ◽

Carbon Stocks ◽

Landsat 8 ◽

Threshold Values ◽

Landsat 8 Oli ◽

Natural Distribution ◽

Siem Reap ◽

Google Earth Engine ◽

Sentinel 2

Although vegetation phenology thresholds have been developed for a wide range of mapping applications, their use for assessing the distribution of natural bamboo and the related carbon stocks is still limited, especially in Southeast Asia. Here, we used Google Earth Engine (GEE) to collect time-series of Landsat 8 Operational Land Imager (OLI) and Sentinel-2 images and employed a phenology-based threshold classification method (PBTC) to map the natural bamboo distribution and estimate carbon stocks in Siem Reap Province, Cambodia. We processed 337 collections of Landsat 8 OLI for phenological assessment and generated 121 phenological profiles of the average vegetation index for three vegetation land cover categories from 2015 to 2018. After determining the minimum and maximum threshold values for bamboo during the leaf-shedding phenology stage, the PBTC method was applied to produce a seasonal composite enhanced vegetation index (EVI) for Landsat collections and assess the bamboo distributions in 2015 and 2018. Bamboo distributions in 2019 were then mapped by applying the EVI phenological threshold values for 10 m resolution Sentinel-2 satellite imagery by accessing 442 tiles. The overall Landsat 8 OLI bamboo maps for 2015 and 2018 had user’s accuracies (UAs) of 86.6% and 87.9% and producer’s accuracies (PAs) of 95.7% and 97.8%, respectively, and a UA of 86.5% and PA of 91.7% were obtained from Sentinel-2 imagery for 2019. Accordingly, carbon stocks of natural bamboo by district in Siem Reap at the province level were estimated. Emission reductions from the protection of natural bamboo can be used to offset 6% of the carbon emissions from tourists who visit this tourism-destination province. It is concluded that a combination of GEE and PBTC and the increasing availability of remote sensing data make it possible to map the natural distribution of bamboo and carbon stocks.

Download Full-text

Biomass quantification of Pinus taeda L. from remote optical sensor data

Advances in Forestry Science ◽

10.34062/afs.v6i2.7086 ◽

2019 ◽

Vol 6 (2) ◽

Author(s):

Carla Talita Pertille ◽

Marcos Felipe Nicoletti ◽

Larissa Regina Topanotti ◽

Thiago Floriani Stepka

Keyword(s):

Pinus Taeda ◽

Vegetation Indices ◽

Sensor Data ◽

Landsat 8 ◽

Landsat 8 Oli ◽

Individual Tree ◽

Significant Difference ◽

Pinus Taeda L ◽

The Individual ◽

Sentinel 2

This research aimed to estimate the biomass of the trunk area of a Pinus taeda L. stand from vegetation indices from Landsat-8/OLI and Sentinel-2/MSI optical remote sensors. In order to obtain the biomass, a forest inventory was carried out with the installation of 33 circular plots of 400 m², in which all the individuals had the diameter at breast height (cm) and the total height (m) measured. Then, 30 trees were scaled by the Smalian method. The individual tree volume was estimated by the Meyer regression volumetric equation. The biomass was obtained through the product of the individual tree volume by the wood basic density. Subsequently, aerial biomass was obtained per plot. The processed orbital images were gathered from the Landsat-8/OLI and Sentinel-2/MSI sensors. We derived 19 vegetation indices for both images, which were correlated with the biomass per plot. The indexes with the best correlation with the biomass were considered as regression variables to develop models by the Stepwise technique (Backward and Forward). The correlation was significant among the variables and the best model was derived from the Landsat-8 data, which estimated the biomass per plot with an error of 8.75% and an adjusted coefficient of determination of 0.8173. Nevertheless, the statistical analysis revealed that there was no significant difference between the biomass estimated by the inventory and by the remotely located data.

Download Full-text

Harmonizing Surface Reflectance Between Landsat-7 ETM+, Landsat-8 OLI, and Sentinel-2 MSI

10.21203/rs.3.rs-1082261/v1 ◽

2021 ◽

Author(s):

Hongye Cao ◽

Ling Han ◽

Liangzhi Li

Keyword(s):

Time Series ◽

Linear Regression ◽

Google Earth ◽

Landsat 8 ◽

Surface Reflectance ◽

Landsat 8 Oli ◽

Landsat 7 ◽

Sentinel 2A ◽

Reflectance Data ◽

Sentinel 2

Abstract Remote sensing dynamic monitoring methods often benefit from a dense time series of observations. To enhance these time series, it is sometimes necessary to integrate data from multiple satellite systems. For more than 40 years, Landsat has provided the longest time record of space-based land surface observations, and the successful launch of the Landsat-8 Operational Land Imager (OLI) sensor in 2013 continues this tradition. However, the 16-day observation period of Landsat images has challenged the ability to measure subtle and transient changes like never before. The European Space Agency (ESA) launched the Sentinel-2A satellite in 2015. The satellite carries a Multispectral Instrument (MSI) sensor that provides a 10-20m spatial resolution data source providing an opportunity to complement the Landsat data record. The collection of Sentinel-2A MSI, Landsat-7 ETM+, and Landsat-8 OLI data provide multispectral global coverage from 10m to 30m with further reduced data revisit intervals. There are many differences between sensor data that need to be taken into account to use these data together reliably. The purpose of this study is to evaluate the potential of integrating surface reflectance data from Landsat-7, Landsat-8 and Sentinel-2 archived in the Google Earth Engine (GEE) cloud platform. To test and quantify the differences between these sensors, hundreds of thousands of surface reflectance data from sensor pairs were collected over China. In this study, some differences in the surface reflectance of the sensor pairs were identified, based upon which a cross-sensor conversion model was proposed, i.e., a suitable adjustment equation was fitted using an ordinary least squares (OLS) linear regression method to convert the Sentinel-2 reflectance values closer to the Landsat-7 or Landsat-8 values. The regression results show that the Sentinel MSI data are spectrally comparable to both types of Landsat image data, just as the Landsat sensors are comparable to each other. The root mean square error (RMSE) values between MSI and Landsat spectral values before coordinating the sensors ranged from 0.014 to 0.037, and the RMSE values between OLI and ETM + ranged from 0.019 to 0.039. After coordination, RMSE values between MSI and Landsat spectral values ranged from 0.011 to 0.026, and RMSD values between OLI and ETM + ranged from 0.013 to 0.034. The fitted adjustment equations were also compared to the HLS (Harmonized Landsat-8 Sentinel-2) global fitted equations (Sentinel-2 to Landsat-8) published by the National Aeronautics and Space Administration (NASA) and were found to be significantly different, increasing the likelihood that such adjustments would need to be fitted on a regional basis. This study believes that despite the differences in these datasets, it appears feasible to integrate these datasets by applying a linear regression correction between the bands.

Download Full-text

A Google Earth Engine application for mapping volcanic thermal anomalies at a global scale by means of Sentinel 2 MSI and Landsat 8 OLI data

10.5194/egusphere-egu2020-4683 ◽

2020 ◽

Author(s):

Nicola Genzano ◽

Francesco Marchese ◽

Alfredo Falconieri ◽

Giuseppe Mazzeo ◽

Nicola Pergola

Keyword(s):

Near Infrared ◽

Global Scale ◽

Google Earth ◽

Landsat 8 ◽

Landsat 8 Oli ◽

Thermal Anomalies ◽

Google Earth Engine ◽

Infrared Radiances ◽

Shortwave Infrared ◽

Sentinel 2

<p>NHI (Normalized Hotspot Indices) is an original multichannel algorithm recently developed for mapping volcanic thermal anomalies in daylight conditions by means of infrared Sentinel 2 MSI and Landsat 8 OLI data. The algorithm, which uses two normalized indices analyzing SWIR (Shortwave Infrared) and NIR (Near Infrared) radiances, was tested with success in different volcanic areas, assessing results by means of independent ground and satellite-based observations.</p><p>Here we present and describe the NHI-based tool, which exploits the high computation capabilities of Google Earth Engine to perform the rapid mapping of hot volcanic features at a global scale. The tool allows the users to retrieve information also about changes of thermal volcanic activity, giving the opportunity of performing time series analysis of hotspot pixel number and total SWIR radiance. Advantages of using the NHI tool as a complement to current satellite-based volcanoes monitoring systems are then analysed and discussed, such as its future upgrades.</p>

Download Full-text

The Utility of the Upcoming HyspIRI’s Simulated Spectral Settings in Detecting Maize Gray Leafy Spot in Relation to Sentinel-2 MSI, VENµS, and Landsat 8 OLI Sensors

Agronomy ◽

10.3390/agronomy9120846 ◽

2019 ◽

Vol 9 (12) ◽

pp. 846

Author(s):

Mbulisi Sibanda ◽

Onisimo Mutanga ◽

Timothy Dube ◽

John Odindi ◽

Paramu L. Mafongoya

Keyword(s):

Food Security ◽

Precision Agriculture ◽

Leaf Spot ◽

Gray Leaf Spot ◽

Economic Losses ◽

Leaf Spot Disease ◽

Landsat 8 ◽

Landsat 8 Oli ◽

Maize Crop ◽

Sentinel 2

Considering the high maize yield loses caused by incidences of disease, as well as incomprehensive monitoring initiatives in crop farming, there is a need for spatially explicit, cost-effective, and consistent approaches for monitoring, as well as for forecasting, food-crop diseases, such as maize Gray Leaf Spot. Such approaches are valuable in reducing the associated economic losses while fostering food security. In this study, we sought to investigate the utility of the forthcoming HyspIRI sensor in detecting disease progression of Maize Gray Leaf Spot infestation in relation to the Sentinel-2 MSI and Landsat 8 OLI spectral configurations simulated using proximally sensed data. Healthy, intermediate, and severe categories of maize crop infections by the Gray Leaf Spot disease were discriminated based on partial least squares–discriminant analysis (PLS-DA) algorithm. Comparatively, the results show that the HyspIRI’s simulated spectral settings slightly performed better than those of Sentinel-2 MSI, VENµS, and Landsat 8 OLI sensor. HyspIRI exhibited an overall accuracy of 0.98 compared to 0.95, 0.93, and 0.89, which were exhibited by Sentinel-2 MSI, VENµS, and Landsat 8 OLI sensor sensors, respectively. Furthermore, the results showed that the visible section, red-edge, and NIR covered by all the four sensors were the most influential spectral regions for discriminating different Maize Gray Leaf Spot infections. These findings underscore the potential value of the upcoming hyperspectral HyspIRI sensor in precision agriculture and forecasting of crop-disease epidemics, which are necessary to ensure food security.

Download Full-text

Comparison of Multi-Temporal PlanetScope Data with Landsat 8 and Sentinel-2 Data for Estimating Airborne LiDAR Derived Canopy Height in Temperate Forests

Remote Sensing ◽

10.3390/rs12111876 ◽

2020 ◽

Vol 12 (11) ◽

pp. 1876 ◽

Cited By ~ 1

Author(s):

Katsuto Shimizu ◽

Tetsuji Ota ◽

Nobuya Mizoue ◽

Hideki Saito

Keyword(s):

Time Series ◽

Prediction Accuracy ◽

Time Series Data ◽

Airborne Lidar ◽

Canopy Height ◽

Forest Monitoring ◽

Series Data ◽

Landsat 8 ◽

Multi Temporal ◽

Sentinel 2

Developing accurate methods for estimating forest structures is essential for efficient forest management. The high spatial and temporal resolution data acquired by CubeSat satellites have desirable characteristics for mapping large-scale forest structural attributes. However, most studies have used a median composite or single image for analyses. The multi-temporal use of CubeSat data may improve prediction accuracy. This study evaluates the capabilities of PlanetScope CubeSat data to estimate canopy height derived from airborne Light Detection and Ranging (LiDAR) by comparing estimates using Sentinel-2 and Landsat 8 data. Random forest (RF) models using a single composite, multi-seasonal composites, and time-series data were investigated at different spatial resolutions of 3, 10, 20, and 30 m. The highest prediction accuracy was obtained by the PlanetScope multi-seasonal composites at 3 m (relative root mean squared error: 51.3%) and Sentinel-2 multi-seasonal composites at the other spatial resolutions (40.5%, 35.2%, and 34.2% for 10, 20, and 30 m, respectively). The results show that RF models using multi-seasonal composites are 1.4% more accurate than those using harmonic metrics from time-series data in the median. PlanetScope is recommended for canopy height mapping at finer spatial resolutions. However, the unique characteristics of PlanetScope data in a spatial and temporal context should be further investigated for operational forest monitoring.

Download Full-text

ANALISIS TEMPORAL PERUBAHAN HUTAN MANGROVE MENGGUNAKAN CITRA SATELIT SENTINEL-2 (Studi Kasus di Pulau Tanakeke, Kabupaten Takalar)

Seminar Nasional Geomatika ◽

10.24895/sng.2020.0-0.1193 ◽

2021 ◽

pp. 777

Author(s):

Andi Tenri Waru ◽

Athar Abdurrahman Bayanuddin ◽

Ferman Setia Nugroho ◽

Nita Rukminasari

Keyword(s):

Random Forest ◽

Google Earth ◽

Multi Temporal ◽

Google Earth Engine ◽

Sentinel 2

Pulau Tanakeke merupakan salah satu pulau dengan hutan mangrove yang luas di pesisir Sulawesi Selatan. Hutan mangrove ini menjadi ekosistem penting bagi masyarakat sekitar karena nilai ekologi maupun ekonominya. Namun, dalam kurun waktu sekitar tahun 1980-2000, keberadaan mangrove tersebut terancam oleh perubahan penggunaan lahan dan juga pemanfaatan yang berlebihan. Penelitian ini bertujuan untuk menganalisis perubahan temporal luas dan tingkat kerapatan hutan mangrove di Pulau Tanakeke antara tahun 2016 dan 2019. Metode analisis perubahan luasan hutan mangrove menggunakan data citra satelit Sentinel-2 multi temporal berdasarkan hasil klasifikasi hutan mangrove dengan menggunakan random forest pada platform Google Earth Engine. Akurasi keseluruhan hasil klasifikasi hutan mangrove tahun 2016 dan 2019 sebesar 91% dan 98%. Berdasarkan hasil analisis spasial diperoleh perubahan penurunan luasan mangrove yang signifikan dari 800,21 ha menjadi 640,15 ha. Kerapatan mangrove di Pulau Tanakeke sebagian besar tergolong kategori dalam kerapatan tinggi.

Download Full-text