scholarly journals Inconsistency among Landsat Sensors in Land Surface Mapping: A Comprehensive Investigation Based on Simulation

2021 ◽  
Vol 13 (7) ◽  
pp. 1383
Author(s):  
Feng Chen ◽  
Chenxing Wang ◽  
Yuansheng Zhang ◽  
Zhenshi Yi ◽  
Qiancong Fan ◽  
...  
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Near Infrared ◽  
Specific Class ◽  
Spectral Indices ◽  
Surface Mapping ◽  
Multispectral Data ◽  
Multi Temporal ◽  
Time Series Analyses ◽  
Shortwave Infrared

Comprehensive investigations on the between-sensor comparability among Landsat sensors have been relatively limited compared with the increasing use of multi-temporal Landsat records in time series analyses. More seriously, the sensor-related difference has not always been considered in applications. Accordingly, comparisons were conducted among all Landsat sensors available currently, including Multispectral Scanner (MSS), Thematic Mappers (TM), Enhanced Thematic Mappers (ETM+), and Operational Land Imager (OLI)) in land cover mapping, based on a collection of synthesized, multispectral data. Compared to TM, OLI showed obvious between-sensor differences in channel reflectance, especially over the near infrared (NIR) and shortwave infrared (SWIR) channels, and presented positive bias in vegetation spectral indices. OLI did not always outperform TM and ETM+ in classification, which related to the methods used. Furthermore, the channels over SWIR of TM and its successors contributed largely to enhancement of inter-class separability and to improvement of classification. Currently, the inclusion of MSS data is confronted with significant challenges regarding the consistency of surface mapping. Considering the inconsistency among the Landsat sensors, it is applicable to generate a consistent time series of spectral indices through proper transformation models. Meanwhile, it suggests the generation of specific class(es) based on interest instead of including all classes simultaneously.

scholarly journals Identifying drought events in sugarcane using drought indices derived from Modis sensor

2017 ◽  
Vol 52 (11) ◽  
pp. 1063-1071 ◽  
Author(s):  
Michelle Cristina Araujo Picoli ◽  
Daniel Garbellini Duft ◽  
Pedro Gerber Machado
Keyword(s):  
Near Infrared ◽  
Sensor Data ◽  
Drought Indices ◽  
Spectral Indices ◽  
Seasonal Fluctuations ◽  
Moderate Resolution ◽  
Resolution Imaging ◽  
Aqua Satellite ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
Shortwave Infrared

Abstract: The objective of this work was to evaluate the potential of several spectral indices, used on moderate resolution imaging spectroradiometer (Modis) images, in identifying drought events in sugarcane. Images of Terra and Aqua satellites were used to calculate the spectral indices, using visible (red), near infrared, and shortwave infrared bands, and eight indices were selected: NDVI, EVI2, GVMI, NDI6, NDI7, NDWI, SRWI, and MSI. The indices were calculated using images between October and April of the crop years 2007/08, 2008/09, 2009/10, and 2013/14. These indices were then correlated with the standardized precipitation-evapotranspiration index (SPEI), calculated for 1, 3, and 6 months. Four of them had significant correlations with SPEI: GVMI, MSI, NDI7, and NDWI. Spectral indices from Modis sensor on board the Aqua satellite (MYD) were more suited for drought detection, and March provided the most relevant indices for that purpose. Drought indices calculated from Modis sensor data are effective for detecting sugarcane drought events, besides being able to indicate seasonal fluctuations.

scholarly journals Surface Roughness Estimation in the Orog Nuur Basin (Southern Mongolia) Using Sentinel-1 SAR Time Series and Ground-Based Photogrammetry

2020 ◽  
Vol 12 (19) ◽  
pp. 3200
Author(s):  
Tobias Ullmann ◽  
Georg Stauch
Keyword(s):  
Time Series ◽  
Surface Roughness ◽  
Root Mean Square ◽  
Land Surface ◽  
Arid Environment ◽  
Mean Square ◽  
Geomorphological Mapping ◽  
Multi Temporal ◽  
Dry Conditions ◽  
Single Field

This study demonstrates an application-oriented approach to estimate area-wide surface roughness from Sentinel-1 time series in the semi-arid environment of the Orog Nuur Basin (southern Mongolia) to support recent geomorphological mapping efforts. The relation of selected mono- and multi-temporal SAR features and roughness is investigated by using an empirical multi-model approach and selected 1D and 2D surface roughness indices. These indices were obtained from 48 high-resolution ground-based photogrammetric digital elevation models, which were acquired during a single field campaign. The analysis is backed by a time series analysis, comparing Sentinel-1 features to temporal-corresponding observations and reanalysis datasets on soil moisture conditions, land surface temperature, occurrence of precipitation events, and presence and development of vegetation. Results show that Sentinel-1 features are hardly sensitive to the changing surface conditions over none to sparsely vegetated land, indicating very dry conditions throughout the year. Consequently, surface roughness is the dominating factor altering SAR intensity. The best correlation is found for the combined surface roughness index Z-Value (ratio between the root mean square height and the correlation length) and the mean summer VH intensity with an r2 coefficient of 0.83 and an Root-Mean-Square Error of 0.032.

scholarly journals A Framework for Multivariate Analysis of Land Surface Dynamics and Driving Variables—A Case Study for Indo-Gangetic River Basins

2022 ◽  
Vol 14 (1) ◽  
pp. 197
Author(s):  
Soner Uereyen ◽  
Felix Bachofer ◽  
Claudia Kuenzer
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Multivariate Time Series ◽  
Water Area ◽  
Methodological Framework ◽  
Surface Dynamics ◽  
Snow Cover Area ◽  
Time Series Analyses ◽  
Statistical Time

The analysis of the Earth system and interactions among its spheres is increasingly important to improve the understanding of global environmental change. In this regard, Earth observation (EO) is a valuable tool for monitoring of long term changes over the land surface and its features. Although investigations commonly study environmental change by means of a single EO-based land surface variable, a joint exploitation of multivariate land surface variables covering several spheres is still rarely performed. In this regard, we present a novel methodological framework for both, the automated processing of multisource time series to generate a unified multivariate feature space, as well as the application of statistical time series analysis techniques to quantify land surface change and driving variables. In particular, we unify multivariate time series over the last two decades including vegetation greenness, surface water area, snow cover area, and climatic, as well as hydrological variables. Furthermore, the statistical time series analyses include quantification of trends, changes in seasonality, and evaluation of drivers using the recently proposed causal discovery algorithm Peter and Clark Momentary Conditional Independence (PCMCI). We demonstrate the functionality of our methodological framework using Indo-Gangetic river basins in South Asia as a case study. The time series analyses reveal increasing trends in vegetation greenness being largely dependent on water availability, decreasing trends in snow cover area being mostly negatively coupled to temperature, and trends of surface water area to be spatially heterogeneous and linked to various driving variables. Overall, the obtained results highlight the value and suitability of this methodological framework with respect to global climate change research, enabling multivariate time series preparation, derivation of detailed information on significant trends and seasonality, as well as detection of causal links with minimal user intervention. This study is the first to use multivariate time series including several EO-based variables to analyze land surface dynamics over the last two decades using the causal discovery algorithm PCMCI.

scholarly journals Sharpening the Sentinel-2 10 and 20 m Bands to Planetscope-0 3 m Resolution

2020 ◽  
Vol 12 (15) ◽  
pp. 2406 ◽  
Author(s):  
Zhongbin Li ◽  
Hankui K. Zhang ◽  
David P. Roy ◽  
Lin Yan ◽  
Haiyan Huang
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Near Infrared ◽  
Detailed Examination ◽  
Modulation Transfer ◽  
Computationally Efficient ◽  
Red Edge ◽  
Shortwave Infrared ◽  
Sentinel 2 ◽  
Surface Changes

Combination of near daily 3 m red, green, blue, and near infrared (NIR) Planetscope reflectance with lower temporal resolution 10 m and 20 m red, green, blue, NIR, red-edge, and shortwave infrared (SWIR) Sentinel-2 reflectance provides potential for improved global monitoring. Sharpening the Sentinel-2 reflectance with the Planetscope reflectance may enable near-daily 3 m monitoring in the visible, red-edge, NIR, and SWIR. However, there are two major issues, namely the different and spectrally nonoverlapping bands between the two sensors and surface changes that may occur in the period between the different sensor acquisitions. They are examined in this study that considers Sentinel-2 and Planetscope imagery acquired one day apart over three sites where land surface changes due to biomass burning occurred. Two well-established sharpening methods, high pass modulation (HPM) and Model 3 (M3), were used as they are multiresolution analysis methods that preserve the spectral properties of the low spatial resolution Sentinel-2 imagery (that are better radiometrically calibrated than Planetscope) and are relatively computationally efficient so that they can be applied at large scale. The Sentinel-2 point spread function (PSF) needed for the sharpening was derived analytically from published modulation transfer function (MTF) values. Synthetic Planetscope red-edge and SWIR bands were derived by linear regression of the Planetscope visible and NIR bands with the Sentinel-2 red-edge and SWIR bands. The HPM and M3 sharpening results were evaluated visually and quantitatively using the Q2n metric that quantifies spectral and spatial distortion. The HPM and M3 sharpening methods provided visually coherent and spatially detailed visible and NIR wavelength sharpened results with low distortion (Q2n values > 0.91). The sharpened red-edge and SWIR results were also coherent but had greater distortion (Q2n values > 0.76). Detailed examination at locations where surface changes between the Sentinel-2 and the Planetscope acquisitions occurred revealed that the HPM method, unlike the M3 method, could reliably sharpen the bands affected by the change. This is because HPM sharpening uses a per-pixel reflectance ratio in the spatial detail modulation which is relatively stable to reflectance changes. The paper concludes with a discussion of the implications of this research and the recommendation that the HPM sharpening be used considering its better performance when there are surface changes.

scholarly journals Evaluation of BRDF Information Retrieved from Time-Series Multiangle Data of the Himawari-8 AHI

2021 ◽  
Vol 14 (1) ◽  
pp. 139
Author(s):  
Xiaoning Zhang ◽  
Ziti Jiao ◽  
Changsen Zhao ◽  
Jing Guo ◽  
Zidong Zhu ◽  
...  
Keyword(s):  
Time Series ◽  
Land Surface ◽  
Near Infrared ◽  
Quantitative Estimation ◽  
Angle Distribution ◽  
Geo Satellite ◽  
Aerosol Property ◽  
Land Surface Parameters ◽  
Mean Square Errors

Recently, much attention has been given to using geostationary Earth orbit (GEO) meteorological satellite data for retrieving land surface parameters due to their high observation frequencies. However, their bidirectional reflectance distribution function (BRDF) information content with a single viewing angle has not been sufficiently investigated, which lays a foundation for subsequent quantitative estimation. In this study, we aim to comprehensively evaluate BRDF information from time-series observations from the Advanced Himawari Imager (AHI) onboard the GEO satellite Himawari-8. First, ~6.2 km monthly multiangle surface reflectances from POLDER onboard a low-Earth-orbiting (LEO) satellite with good angle distributions over various land types during 2008 were used as reference data, and corresponding 0.05° high-quality MODIS (i.e., onboard LEO satellites) and AHI datasets during four months in 2020 were obtained using cloud and aerosol property products. Then, indicators of angle distribution, BRDF change, and albedos were retrieved by the kernel-driven Ross-Li BRDF model from the three datasets, which were used for comparisons over different time spans. Generally, the quality of sun-viewing geometries varies dramatically for accumulated AHI observations according to the weight-of-determination, and wide-ranging anisotropic flat indices are obtained. The root-mean-square-errors of white sky albedos between AHI and MODIS half-month data are 0.018 and 0.033 in the red and near-infrared bands, respectively, achieving smaller values of 0.004 and 0.007 between the half-month and daily AHI data, respectively, due to small variances in sun-viewing geometries. The generally wide AHI BRDF variances and good consistency in albedo with MODIS show their potential for retrieving anisotropy information and albedo, while angle accumulation quality of AHI time-series observations must be considered.

scholarly journals Forest species mapping using airborne hyperspectral APEX data

2016 ◽  
Vol 20 (1) ◽  
pp. 28-33 ◽  
Author(s):  
Giulia Tagliabue ◽  
Cinzia Panigada ◽  
Roberto Colombo ◽  
Francesco Fava ◽  
Chiara Cilia ◽  
...  
Keyword(s):  
Near Infrared ◽  
Hyperspectral Data ◽  
Forest Species ◽  
Blue Band ◽  
Vegetation Development ◽  
Infrared Spectral ◽  
Multi Temporal ◽  
High Resolution Images ◽  
Shortwave Infrared ◽  
Species Mapping

Abstract The accurate mapping of forest species is a very important task in relation to the increasing need to better understand the role of the forest ecosystem within environmental dynamics. The objective of this paper is the investigation of the potential of a multi-temporal hyperspectral dataset for the production of a thematic map of the dominant species in the Forêt de Hardt (France). Hyperspectral data were collected in June and September 2013 using the Airborne Prism EXperiment (APEX) sensor, covering the visible, near-infrared and shortwave infrared spectral regions with a spatial resolution of 3 m by 3 m. The map was realized by means of a maximum likelihood supervised classification. The classification was first performed separately on images from June and September and then on the two images together. Class discrimination was performed using as input 3 spectral indices computed as ratios between red edge bands and a blue band for each image. The map was validated using a testing set selected on the basis of a random stratified sampling scheme. Results showed that the algorithm performances improved from an overall accuracy of 59.5% and 48% (for the June and September images, respectively) to an overall accuracy of 74.4%, with the producer’s accuracy ranging from 60% to 86% and user’s accuracy ranging from 61% to 90%, when both images (June and September) were combined. This study demonstrates that the use of multi-temporal high-resolution images acquired in two different vegetation development stages (i.e., 17 June 2013 and 4 September 2013) allows accurate (overall accuracy 74.4%) local-scale thematic products to be obtained in an operational way.

scholarly journals Mapping the Lithological Features and Ore-Controlling Structures Related to Ni–Cu Mineralization in the Eastern Tian Shan, NW China from ASTER Data

2021 ◽  
Vol 13 (2) ◽  
pp. 206
Author(s):  
Shuo Zheng ◽  
Yanfei An ◽  
Pilong Shi ◽  
Tian Zhao
Keyword(s):  
Near Infrared ◽  
Thermal Emission ◽  
Strike Slip ◽  
Fault System ◽  
Multispectral Data ◽  
Aster Data ◽  
Ore Bodies ◽  
Dextral Strike Slip Fault ◽  
Shortwave Infrared ◽  
Tian Shan

The study of lithological features and tectonic evolution related to mineralization in the eastern Tian Shan is crucial for understanding the ore-controlling mechanism. In this paper, the lithological features and ore-controlling structure of the Huangshan Ni–Cu ore belt in the eastern Tian Shan are documented using advanced spaceborne thermal emission and reflection radiometer (ASTER) multispectral data based on spectral image processing algorithms, mineral indices and directional filter technology. Our results show that the algorithms of b2/b1, b6/b7 and b4/b8 from ASTER visible and near-infrared (VNIR)- shortwave infrared (SWIR) bands and of mafic index (MI), carbonate index (CI) and silica index (SI) from thermal infrared (TIR) bands are helpful to extract regional pyroxenite, external foliated gabbro bearing Ni–Cu ore bodies as well as the country rocks in the study area. The detailed interpretations and analyses of the geometrical feature of fault system and intrusive facies suggest that the Ni–Cu metallogenic belts are related to Carboniferous arc intrusive rocks and Permian wrench tectonics locating at the intersection of EW- and NEE-striking dextral strike-slip fault system, and the emplacement at the releasing bends in the southern margin of Kanggur Fault obviously controlled by secondary faults orthogonal or oblique to the Kanggur Fault in the post-collision extensional environment. Therefore, the ASTER data-based approach to map lithological features and ore-controlling structures related to the Ni–Cu mineralization are well performed. Moreover, a 3D geodynamic sketch map proposes that the strike-slip movement of Kanggur Fault in Huangshan-Kanggur Shear Zone (HKSZ) during early Permian controlled the migration and emplacement of three mafic/ultramafic intrusions bearing Ni–Cu derived from partial mantle melting and also favored CO2-rich fluids leaking to the participation of metallogenic processes.

scholarly journals A MULTI-TEMPORAL APPROACH FOR DETECTING SNOW COVER AREA USING GEOSTATIONARY IMAGERY DATA

2016 ◽  
Vol XLI-B8 ◽  
pp. 511-512
Author(s):  
Hwa-Seon Lee ◽  
Kyu-Sung Lee
Keyword(s):  
Snow Cover ◽  
Near Infrared ◽  
Detection Method ◽  
Temporal Variations ◽  
High Temporal Resolution ◽  
Snow Cover Area ◽  
Swir Band ◽  
Multi Temporal ◽  
The Difference ◽  
Shortwave Infrared

In this study, we attempt to detect snow cover area using multi-temporal geostationary satellite imagery based on the difference of spectral and temporal characteristics between snow and clouds. The snow detection method is based on sequential processing of simple thresholds on multi-temporal GOCI data. We initially applied a simple threshold of blue reflectance and then root mean square deviation (RMSD) threshold of near infrared (NIR) reflectance that were calculated from time-series GOCI data. Snow cover detected by the proposed method was compared with the MODIS snow products. The proposed snow detection method provided very similar results with the MODIS cloud products. Although the GOCI data do not have shortwave infrared (SWIR) band, which can spectrally separate snow cover from clouds, the high temporal resolution of the GOCI was effective for analysing the temporal variations between snow and clouds.

scholarly journals A New Pseudoinvariant Near-Infrared Threshold Method for Relative Radiometric Correction of Aerial Imagery

2019 ◽  
Vol 11 (16) ◽  
pp. 1931 ◽  
Author(s):  
Hua Zhang ◽  
Paul V. Zimba ◽  
Emmanuel U. Nzewi
Keyword(s):  
Time Series ◽  
High Resolution ◽  
Land Surface ◽  
Vegetation Index ◽  
Near Infrared ◽  
Aerial Imagery ◽  
Surface Reflectance ◽  
Radiometric Correction ◽  
Surface Patterns ◽  
Relative Radiometric Correction

The utilization of high-resolution aerial imagery such as the National Agriculture Imagery Program (NAIP) data is often hampered by a lack of methods for retrieving surface reflectance from digital numbers. This study developed a new relative radiometric correction method to retrieve 1 m surface reflectance from NAIP imagery. The advantage of this method lies in the adaptive identification of pseudoinvariant (PIV) pixels from a time series of Landsat images that can fully characterize the temporally spectral variations of land surface. The identified PIV pixels allow for an effective conversion of digital numbers to surface reflectance, as demonstrated through the validation at 150 sites across the contiguous United States. The results show substantial improvement in the agreement of NAIP-derived normalized difference vegetation index (NDVI) values with Landsat-derived NDVI reference. Across the sites, root mean square error and mean absolute error were reduced from 0.37 ± 0.14 to 0.08 ± 0.07 and from 0.91 ± 0.64 to 0.18 ± 0.52, respectively. Over 70% PIV pixels on average were derived from vegetated areas, while water and developed areas together contributed 27% of the PIV pixels. As the NAIP program is continuing to generate new images across the country, the advantages of its high spatial resolution, national coverage, long time series, and regular revisits will make it an increasingly crucial data source for a variety of research and management applications. The proposed method could benefit many agricultural, hydrological, and urban studies that rely on NAIP imagery to quantify land surface patterns and dynamics. It could also be applied to improve the preprocessing of high-resolution aerial imagery in other countries.

Sign in / Sign up

Export Citation Format

Share Document