scholarly journals Presenting a Semi-Automatic, Statistically-Based Approach to Assess the Sharpness Level of Optical Images from Natural Targets via the Edge Method. Case Study: The Landsat 8 OLI–L1T Data

2021 ◽  
Vol 13 (8) ◽  
pp. 1593
Author(s):  
Luca Cenci ◽  
Valerio Pampanoni ◽  
Giovanni Laneve ◽  
Carla Santella ◽  
Valentina Boccia
Keyword(s):  
Landsat 8 ◽  
Image Sharpness ◽  
Optical Images ◽  
Data Quality Assessment ◽  
Relevant Role ◽  
Edge Method ◽  
Selection Of ◽  
Statistical Criteria

Developing reliable methodologies of data quality assessment is of paramount importance for maximizing the exploitation of Earth observation (EO) products. Among the different factors influencing EO optical image quality, sharpness has a relevant role. When implementing on-orbit approaches of sharpness assessment, such as the edge method, a crucial step that strongly affects the final results is the selection of suitable edges to use for the analysis. Within this context, this paper aims at proposing a semi-automatic, statistically-based edge method (SaSbEM) that exploits edges extracted from natural targets easily and largely available on Earth: agricultural fields. For each image that is analyzed, SaSbEM detects numerous suitable edges (e.g., dozens-hundreds) characterized by specific geometrical and statistical criteria. This guarantees the repeatability and reliability of the analysis. Then, it implements a standard edge method to assess the sharpness level of each edge. Finally, it performs a statistical analysis of the results to have a robust characterization of the image sharpness level and its uncertainty. The method was validated by using Landsat 8 L1T products. Results proved that: SaSbEM is capable of performing a reliable and repeatable sharpness assessment; Landsat 8 L1T data are characterized by very good sharpness performance.

Applications of Transmission Electron Microscopy in the Characterization of Metal Machinability

1968 ◽  
Vol 26 ◽  
pp. 442-443 ◽  
Author(s):  
L.E. Murr ◽  
A.B. Draper
Keyword(s):  
Electron Microscopy ◽  
State Physics ◽  
Test Material ◽  
Milling Machine ◽  
Rotary Table ◽  
Solid State Physics ◽  
Materials Properties ◽  
Transmission Electron ◽  
Selection Of

The industrial characterization of the machinability of metals and alloys has always been a very arbitrarily defined property, subject to the selection of various reference or test materials; and the adoption of rather naive and misleading interpretations and standards. However, it seems reasonable to assume that with the present state of knowledge of materials properties, and the current theories of solid state physics, more basic guidelines for machinability characterization might be established on the basis of the residual machined microstructures. This approach was originally pursued by Draper; and our presentation here will simply reflect an exposition and extension of this research.The technique consists initially in the production of machined chips of a desired test material on a horizontal milling machine with the workpiece (specimen) mounted on a rotary table vice. A single cut of a specified depth is taken from the workpiece (0.25 in. wide) each at a new tool location.

Construction of plastic contact deformation maps on ceramics: a case study on aluminum nitride

1996 ◽  
Vol 54 ◽  
pp. 636-637
Author(s):  
D. L. Callahan
Keyword(s):  
Plastic Deformation ◽  
Aluminum Nitride ◽  
Mechanical Response ◽  
Three Dimensional ◽  
Bright Field Image ◽  
Perfectly Plastic ◽  
Contrast Analysis ◽  
Deformation Patterns

Modern polishing, precision machining and microindentation techniques allow the processing and mechanical characterization of ceramics at nanometric scales and within entirely plastic deformation regimes. The mechanical response of most ceramics to such highly constrained contact is not predictable from macroscopic properties and the microstructural deformation patterns have proven difficult to characterize by the application of any individual technique. In this study, TEM techniques of contrast analysis and CBED are combined with stereographic analysis to construct a three-dimensional microstructure deformation map of the surface of a perfectly plastic microindentation on macroscopically brittle aluminum nitride.The bright field image in Figure 1 shows a lg Vickers microindentation contained within a single AlN grain far from any boundaries. High densities of dislocations are evident, particularly near facet edges but are not individually resolvable. The prominent bend contours also indicate the severity of plastic deformation. Figure 2 is a selected area diffraction pattern covering the entire indentation area.

Topik-Topik Komunikasi Dakwah Dalam Mesej Akidah Kepada Masyarakat Orang Asli di Selangor

Sains Insani ◽  
2018 ◽  
Vol 3 (2) ◽  
pp. 15-21
Author(s):  
Zulkefli Aini ◽  
Abdul Ghafar Don ◽  
Ahmad Irdha Mokhtar ◽  
Nur Uswah Ahmad Fauzi
Keyword(s):  
Qualitative Study ◽  
Study Design ◽  
Verbal Feedback ◽  
Structured Interviews ◽  
Orang Asli ◽  
Case Study Design ◽  
Beliefs And Practice ◽  
Islamic Faith ◽  
Selection Of

One of the factors that can affect a person's behavior is a communication message. In the context of the da`wah, preachers who involved actively in da`wah communication with the Orang Asli should be able to ensure that the message conveyed can be understood by the target group. In addition, the selection of the correct messages of da`wah based on the foremost priority simplify the process of sharing information between the preachers and the Orang Asli. Accordingly, this article aims to identify specific topics of Islamic faith (akidah) submitted by the Orang Asli in the process of da`wah communication and to identify verbal feedback given by the preachers to the Orang Asli of the topics. This qualitative study using case study design and data was collected through semi-structured interviews. Interviews involving nine preachers were active in da`wah activity to the Orang Asli community in Selangor. Data were analyzed thematically according to the specified objectives. The study found that the topics frequently raised by the Orang Asli is concerned about belief in Allah, belief in Malaikat, and belief in Qada' and Qadar. The topics may be found within the framework of worldview in their beliefs and practice of ancient traditions. Therefore, the preachers gave verbal feedback on these topics is based on a clear and precise sample corresponding to the level of their thinking. The emphasis on these topics is very important to strengthen and purify the faith of the community.Keywords: Communication; Message; Preacher; Indigenous community Abstrak: Elemen mesej dalam komunikasi merupakan salah satu faktor yang dapat memberi kesan terhadap perubahan tingkah laku seseorang. Dalam konteks dakwah, pendakwah yang terlibat dalam proses komunikasi dakwah dengan Orang Asli seharusnya berkebolehan memastikan kandungan mesej yang disampaikan boleh difahami oleh sasaran dakwahnya. Di samping itu, pemilihan mesej dakwah yang betul mengikut keutamaan memudahkan proses perkongsian maklumat antara pendakwah dengan Orang Asli. Sehubungan dengan itu, artikel ini bertujuan untuk mengenalpasti topik-topik tertentu dalam mesej akidah yang dikemukakan oleh masyarakat Orang Asli kepada pendakwah dan mengenalpasti maklum balas lisan yang diberikan oleh pendakwah kepada Orang Asli terhadap topik tersebut. Kajian kualitatif ini menggunakan reka bentuk kajian kes dengan pengumpulan data melalui temu bual separa struktur. Temu bual melibatkan sembilan orang pendakwah yang aktif dalam aktiviti dakwah masyarakat Orang Asli di Selangor. Data kajian dianalisis secara tematik mengikut objektif yang ditentukan. Kajian ini mendapati bahawa topik-topik yang sering dikemukan oleh Orang Asli kepada pendakwah dalam penyampaian mesej akidah ialah berkenaan tentang keimanan kepada Allah SWT, keimanan kepada malaikat, dan keimanan kepada qada’ dan qadar. Topik-topik berkenaan didapati berada dalam kerangka worldview kepercayaan dan amalan tradisi mereka. Sehubungan dengan itu, pendakwah memberikan maklum balas lisan terhadap topik-topik tersebut adalah berdasarkan keterangan yang jelas dan contoh yang tepat bersesuaian dengan tahap pemikiran mereka. Penekanan terhadap topik-topik tersebut merupakan perkara yang penting dalam rangka mengukuhkan dan memurnikan akidah masyarakat Orang Asli.Kata kunci: Komunikasi; Mesej; Pendakwah; Komuniti Orang Asli

Integrating The Geophysical Characterization Of Seismic Thin Beds With Stochastic Reservoir Modeling: A Case Study From The Kutei Basin (Offshore Kalimantan, Indonesia)

2011 ◽  
Author(s):  
Giorgio Rocco Cavanna ◽  
Ernesto Caselgrandi ◽  
Elisa Corti ◽  
Alessandro Amato del Monte ◽  
Massimo Fervari ◽  
...  
Keyword(s):  
Reservoir Modeling ◽  
Geophysical Characterization

Failure Analysis of CDM-ESD Damage in a GaAs RFIC

2000 ◽  
Author(s):  
Amy Poe ◽  
Steve Brockett ◽  
Tony Rubalcava
Keyword(s):  
Radio Frequency ◽  
Failure Analysis ◽  
Integrated Circuit ◽  
Production Test ◽  
Analysis Techniques ◽  
Device Model ◽  
Charged Device ◽  
Subsequent Failure

Abstract The intent of this work is to demonstrate the importance of charged device model (CDM) ESD testing and characterization by presenting a case study of a situation in which CDM testing proved invaluable in establishing the reliability of a GaAs radio frequency integrated circuit (RFIC). The problem originated when a sample of passing devices was retested to the final production test. Nine of the 200 sampled devices failed the retest, thus placing the reliability of all of the devices in question. The subsequent failure analysis indicated that the devices failed due to a short on one of two capacitors, bringing into question the reliability of the dielectric. Previous ESD characterization of the part had shown that a certain resistor was likely to fail at thresholds well below the level at which any capacitors were damaged. This paper will discuss the failure analysis techniques which were used and the testing performed to verify the failures were actually due to ESD, and not caused by weak capacitors.

dC/dV and CV Characterization of Gate Resistance Defects in eDRAM Circuits

2013 ◽  
Author(s):  
Sweta Pendyala ◽  
Dave Albert ◽  
Katherine Hawkins ◽  
Michael Tenney
Keyword(s):  
Deep Submicron ◽  
Work Flow ◽  
Localization Technique ◽  
Characterization Techniques ◽  
Capacitance Voltage ◽  
Gate Resistance

Abstract Resistive gate defects are unusual and difficult to detect with conventional techniques [1] especially on advanced devices manufactured with deep submicron SOI technologies. An advanced localization technique such as Scanning Capacitance Imaging is essential for localizing these defects, which can be followed by DC probing, dC/dV, CV (Capacitance-Voltage) measurements to completely characterize the defect. This paper presents a case study demonstrating this work flow of characterization techniques.

Case Study and Fault Modeling for Wrong Redundancy Evaluation on DRAM Devices

2007 ◽  
Author(s):  
Martin Versen ◽  
Dorina Diaconescu ◽  
Jerome Touzel
Keyword(s):  
Failure Mode ◽  
Failure Modes ◽  
Fault Modeling ◽  
Mode Analysis ◽  
Root Cause ◽  
Failure Mode Analysis

Abstract The characterization of failure modes of DRAM is often straight forward if array related hard failures with specific addresses for localization are concerned. The paper presents a case study of a bitline oriented failure mode connected to a redundancy evaluation in the DRAM periphery. The failure mode analysis and fault modeling focus both on the root-cause and on the test aspects of the problem.

Sign in / Sign up

Export Citation Format

Share Document