scholarly journals Regionalized Linear Models for River Depth Retrieval Using 3-Band Multispectral Imagery and Green LIDAR Data

2021 ◽  
Vol 13 (19) ◽  
pp. 3897
Author(s):  
Håkon Sundt ◽  
Knut Alfredsen ◽  
Atle Harby
Keyword(s):  
Linear Models ◽  
Model Performance ◽  
Green Light ◽  
Aerial Images ◽  
Lidar Data ◽  
Regional Models ◽  
Depth Maps ◽  
Verification Of Models ◽  
Sentinel 2

Bathymetry is of vital importance in river studies but obtaining full-scale riverbed maps often requires considerable resources. Remote sensing imagery can be used for efficient depth mapping in both space and time. Multispectral image depth retrieval requires imagery with a certain level of quality and local in-situ depth observations for the calculation and verification of models. To assess the potential of providing extensive depth maps in rivers lacking local bathymetry, we tested the application of three platform-specific, regionalized linear models for depth retrieval across four Norwegian rivers. We used imagery from satellite platforms Worldview-2 and Sentinel-2, along with local aerial images to calculate the intercept and slope vectors. Bathymetric input was provided using green Light Detection and Ranging (LIDAR) data augmented by sonar measurements. By averaging platform-specific intercept and slope values, we calculated regionalized linear models and tested model performance in each of the four rivers. While the performance of the basic regional models was comparable to local river-specific models, regional models were improved by including the estimated average depth and a brightness variable. Our results show that regionalized linear models for depth retrieval can potentially be applied for extensive spatial and temporal mapping of bathymetry in water bodies where local in-situ depth measurements are lacking.

scholarly journals Modeling Diameter Distributions with Six Probability Density Functions in Pinus halepensis Mill. Plantations Using Low-Density Airborne Laser Scanning Data in Aragón (Northeast Spain)

2021 ◽  
Vol 13 (12) ◽  
pp. 2307
Author(s):  
J. Javier Gorgoso-Varela ◽  
Rafael Alonso Ponce ◽  
Francisco Rodríguez-Puerta
Keyword(s):  
Probability Density ◽  
Linear Models ◽  
Pinus Halepensis ◽  
Beta Function ◽  
Probability Density Functions ◽  
Lidar Data ◽  
Density Functions ◽  
Minimum Diameter ◽  
Location Parameters ◽  
Diameter Distributions

The diameter distributions of trees in 50 temporary sample plots (TSPs) established in Pinus halepensis Mill. stands were recovered from LiDAR metrics by using six probability density functions (PDFs): the Weibull (2P and 3P), Johnson’s SB, beta, generalized beta and gamma-2P functions. The parameters were recovered from the first and the second moments of the distributions (mean and variance, respectively) by using parameter recovery models (PRM). Linear models were used to predict both moments from LiDAR data. In recovering the functions, the location parameters of the distributions were predetermined as the minimum diameter inventoried, and scale parameters were established as the maximum diameters predicted from LiDAR metrics. The Kolmogorov–Smirnov (KS) statistic (Dn), number of acceptances by the KS test, the Cramér von Misses (W2) statistic, bias and mean square error (MSE) were used to evaluate the goodness of fits. The fits for the six recovered functions were compared with the fits to all measured data from 58 TSPs (LiDAR metrics could only be extracted from 50 of the plots). In the fitting phase, the location parameters were fixed at a suitable value determined according to the forestry literature (0.75·dmin). The linear models used to recover the two moments of the distributions and the maximum diameters determined from LiDAR data were accurate, with R2 values of 0.750, 0.724 and 0.873 for dg, dmed and dmax. Reasonable results were obtained with all six recovered functions. The goodness-of-fit statistics indicated that the beta function was the most accurate, followed by the generalized beta function. The Weibull-3P function provided the poorest fits and the Weibull-2P and Johnson’s SB also yielded poor fits to the data.

scholarly journals Using Sentinel-2 Images to Estimate Topography, Tidal-Stage Lags and Exposure Periods over Large Intertidal Areas

2021 ◽  
Vol 13 (2) ◽  
pp. 320
Author(s):  
José P. Granadeiro ◽  
João Belo ◽  
Mohamed Henriques ◽  
João Catalão ◽  
Teresa Catry
Keyword(s):  
Large Scale ◽  
Exposure Period ◽  
Intertidal Area ◽  
Digital Elevation ◽  
Geographical Bias ◽  
Novel Method ◽  
Tidal Stage ◽  
Sentinel 2

Intertidal areas provide key ecosystem services but are declining worldwide. Digital elevation models (DEMs) are important tools to monitor the evolution of such areas. In this study, we aim at (i) estimating the intertidal topography based on an established pixel-wise algorithm, from Sentinel-2 MultiSpectral Instrument scenes, (ii) implementing a set of procedures to improve the quality of such estimation, and (iii) estimating the exposure period of the intertidal area of the Bijagós Archipelago, Guinea-Bissau. We first propose a four-parameter logistic regression to estimate intertidal topography. Afterwards, we develop a novel method to estimate tide-stage lags in the area covered by a Sentinel-2 scene to correct for geographical bias in topographic estimation resulting from differences in water height within each image. Our method searches for the minimum differences in height estimates obtained from rising and ebbing tides separately, enabling the estimation of cotidal lines. Tidal-stage differences estimated closely matched those published by official authorities. We re-estimated pixel heights from which we produced a model of intertidal exposure period. We obtained a high correlation between predicted and in-situ measurements of exposure period. We highlight the importance of remote sensing to deliver large-scale intertidal DEM and tide-stage data, with relevance for coastal safety, ecology and biodiversity conservation.

scholarly journals Industrial Plume Properties Retrieved by Optimal Estimation Using Combined Hyperspectral and Sentinel-2 Data

2021 ◽  
Vol 13 (10) ◽  
pp. 1865
Author(s):  
Gabriel Calassou ◽  
Pierre-Yves Foucher ◽  
Jean-François Léon
Keyword(s):  
Matched Filter ◽  
Estimation Method ◽  
Optimal Estimation ◽  
Model Parameters ◽  
Surface Reflectance ◽  
Sequential Method ◽  
Modal Radius ◽  
Sentinel 2

Stack emissions from the industrial sector are a subject of concern for air quality. However, the characterization of the stack emission plume properties from in situ observations remains a challenging task. This paper focuses on the characterization of the aerosol properties of a steel plant stack plume through the use of hyperspectral (HS) airborne remote sensing imagery. We propose a new method, based on the combination of HS airborne acquisition and surface reflectance imagery derived from the Sentinel-2 Multi-Spectral Instrument (MSI). The proposed method detects the plume footprint and estimates the surface reflectance under the plume, the aerosol optical thickness (AOT), and the modal radius of the plume. Hyperspectral surface reflectances are estimated using the coupled non-negative matrix factorization (CNMF) method combining HS and MSI data. The CNMF reduces the error associated with estimating the surface reflectance below the plume, particularly for heterogeneous classes. The AOT and modal radius are retrieved using an optimal estimation method (OEM), based on the forward model and allowing for uncertainties in the observations and in the model parameters. The a priori state vector is provided by a sequential method using the root mean square error (RMSE) metric, which outperforms the previously used cluster tuned matched filter (CTMF). The OEM degrees of freedom are then analysed, in order to refine the mask plume and to enhance the quality of the retrieval. The retrieved mean radii of aerosol particles in the plume is 0.125 μμm, with an uncertainty of 0.05 μμm. These results are close to the ultra-fine mode (modal radius around 0.1 μμm) observed from in situ measurements within metallurgical plant plumes from previous studies. The retrieved AOT values vary between 0.07 (near the source point) and 0.01, with uncertainties of 0.005 for the darkest surfaces and above 0.010 for the brightest surfaces.

scholarly journals Deep Learning for Monitoring Agricultural Drought in South Asia Using Remote Sensing Data

2021 ◽  
Vol 13 (9) ◽  
pp. 1715
Author(s):  
Foyez Ahmed Prodhan ◽  
Jiahua Zhang ◽  
Fengmei Yao ◽  
Lamei Shi ◽  
Til Prasad Pangali Sharma ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Deep Learning ◽  
South Asia ◽  
Model Performance ◽  
Remote Sensing Data ◽  
Agricultural Drought ◽  
Gradient Boosting ◽  
Complex Nature ◽  
Sensing Data

Drought, a climate-related disaster impacting a variety of sectors, poses challenges for millions of people in South Asia. Accurate and complete drought information with a proper monitoring system is very important in revealing the complex nature of drought and its associated factors. In this regard, deep learning is a very promising approach for delineating the non-linear characteristics of drought factors. Therefore, this study aims to monitor drought by employing a deep learning approach with remote sensing data over South Asia from 2001–2016. We considered the precipitation, vegetation, and soil factors for the deep forwarded neural network (DFNN) as model input parameters. The study evaluated agricultural drought using the soil moisture deficit index (SMDI) as a response variable during three crop phenology stages. For a better comparison of deep learning model performance, we adopted two machine learning models, distributed random forest (DRF) and gradient boosting machine (GBM). Results show that the DFNN model outperformed the other two models for SMDI prediction. Furthermore, the results indicated that DFNN captured the drought pattern with high spatial variability across three penology stages. Additionally, the DFNN model showed good stability with its cross-validated data in the training phase, and the estimated SMDI had high correlation coefficient R2 ranges from 0.57~0.90, 0.52~0.94, and 0.49~0.82 during the start of the season (SOS), length of the season (LOS), and end of the season (EOS) respectively. The comparison between inter-annual variability of estimated SMDI and in-situ SPEI (standardized precipitation evapotranspiration index) showed that the estimated SMDI was almost similar to in-situ SPEI. The DFNN model provides comprehensive drought information by producing a consistent spatial distribution of SMDI which establishes the applicability of the DFNN model for drought monitoring.

scholarly journals Building Change Detection Using Old Aerial Images and New LiDAR Data

2016 ◽  
Vol 8 (12) ◽  
pp. 1030 ◽  
Author(s):  
Shouji Du ◽  
Yunsheng Zhang ◽  
Rongjun Qin ◽  
Zhihua Yang ◽  
Zhengrong Zou ◽  
...  
Keyword(s):  
Change Detection ◽  
Aerial Images ◽  
Lidar Data

scholarly journals Identification of Health Expenditures Determinants: A Model to Manage the Economic Burden of Cardiovascular Disease

2021 ◽  
Vol 18 (9) ◽  
pp. 4652
Author(s):  
Fiorella Pia Salvatore ◽  
Alessia Spada ◽  
Francesca Fortunato ◽  
Demetris Vrontis ◽  
Mariantonietta Fiore
Keyword(s):  
Cardiovascular Disease ◽  
Hospital Discharge ◽  
Random Effects ◽  
Economic Burden ◽  
Linear Models ◽  
Health Management ◽  
Model Performance ◽  
Real Data ◽  
Large Set ◽  
Regional Health

The purpose of this paper is to investigate the determinants influencing the costs of cardiovascular disease in the regional health service in Italy’s Apulia region from 2014 to 2016. Data for patients with acute myocardial infarction (AMI), heart failure (HF), and atrial fibrillation (AF) were collected from the hospital discharge registry. Generalized linear models (GLM), and generalized linear mixed models (GLMM) were used to identify the role of random effects in improving the model performance. The study was based on socio-demographic variables and disease-specific variables (diagnosis-related group, hospitalization type, hospital stay, surgery, and economic burden of the hospital discharge form). Firstly, both models indicated an increase in health costs in 2016, and lower spending values for women (p < 0.001) were shown. GLMM indicates a significant increase in health expenditure with increasing age (p < 0.001). Day-hospital has the lowest cost, surgery increases the cost, and AMI is the most expensive pathology, contrary to AF (p < 0.001). Secondly, AIC and BIC assume the lowest values for the GLMM model, indicating the random effects’ relevance in improving the model performance. This study is the first that considers real data to estimate the economic burden of CVD from the regional health service’s perspective. It appears significant for its ability to provide a large set of estimates of the economic burden of CVD, providing information to managers for health management and planning.

scholarly journals Multiscale Semantic Feature Optimization and Fusion Network for Building Extraction Using High-Resolution Aerial Images and LiDAR Data

2021 ◽  
Vol 13 (13) ◽  
pp. 2473
Author(s):  
Qinglie Yuan ◽  
Helmi Zulhaidi Mohd Shafri ◽  
Aidi Hizami Alias ◽  
Shaiful Jahari Hashim
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Spatial Information ◽  
Feature Fusion ◽  
Aerial Images ◽  
Semantic Gap ◽  
Superior Performance ◽  
Lidar Data ◽  
Building Extraction ◽  
Hierarchical Features

Automatic building extraction has been applied in many domains. It is also a challenging problem because of the complex scenes and multiscale. Deep learning algorithms, especially fully convolutional neural networks (FCNs), have shown robust feature extraction ability than traditional remote sensing data processing methods. However, hierarchical features from encoders with a fixed receptive field perform weak ability to obtain global semantic information. Local features in multiscale subregions cannot construct contextual interdependence and correlation, especially for large-scale building areas, which probably causes fragmentary extraction results due to intra-class feature variability. In addition, low-level features have accurate and fine-grained spatial information for tiny building structures but lack refinement and selection, and the semantic gap of across-level features is not conducive to feature fusion. To address the above problems, this paper proposes an FCN framework based on the residual network and provides the training pattern for multi-modal data combining the advantage of high-resolution aerial images and LiDAR data for building extraction. Two novel modules have been proposed for the optimization and integration of multiscale and across-level features. In particular, a multiscale context optimization module is designed to adaptively generate the feature representations for different subregions and effectively aggregate global context. A semantic guided spatial attention mechanism is introduced to refine shallow features and alleviate the semantic gap. Finally, hierarchical features are fused via the feature pyramid network. Compared with other state-of-the-art methods, experimental results demonstrate superior performance with 93.19 IoU, 97.56 OA on WHU datasets and 94.72 IoU, 97.84 OA on the Boston dataset, which shows that the proposed network can improve accuracy and achieve better performance for building extraction.

scholarly journals Aerosol optical and microphysical retrievals from a hybrid multiwavelength lidar data set – DISCOVER-AQ 2011

2014 ◽  
Vol 7 (9) ◽  
pp. 3095-3112 ◽  
Author(s):  
P. Sawamura ◽  
D. Müller ◽  
R. M. Hoff ◽  
C. A. Hostetler ◽  
R. A. Ferrare ◽  
...  
Keyword(s):  
Remote Sensing ◽  
In Situ Measurements ◽  
Index Of Refraction ◽  
High Spectral Resolution ◽  
Lidar Data ◽  
Data Set ◽  
Microphysical Properties ◽  
Lidar Measurements ◽  
Multiwavelength Lidar

Abstract. Retrievals of aerosol microphysical properties (effective radius, volume and surface-area concentrations) and aerosol optical properties (complex index of refraction and single-scattering albedo) were obtained from a hybrid multiwavelength lidar data set for the first time. In July 2011, in the Baltimore–Washington DC region, synergistic profiling of optical and microphysical properties of aerosols with both airborne (in situ and remote sensing) and ground-based remote sensing systems was performed during the first deployment of DISCOVER-AQ. The hybrid multiwavelength lidar data set combines ground-based elastic backscatter lidar measurements at 355 nm with airborne High-Spectral-Resolution Lidar (HSRL) measurements at 532 nm and elastic backscatter lidar measurements at 1064 nm that were obtained less than 5 km apart from each other. This was the first study in which optical and microphysical retrievals from lidar were obtained during the day and directly compared to AERONET and in situ measurements for 11 cases. Good agreement was observed between lidar and AERONET retrievals. Larger discrepancies were observed between lidar retrievals and in situ measurements obtained by the aircraft and aerosol hygroscopic effects are believed to be the main factor in such discrepancies.

Sign in / Sign up

Export Citation Format

Share Document