scholarly journals Mineralogical Mapping with Accurately Corrected Shortwave Infrared Hyperspectral Data Acquired Obliquely from UAVs

2021 ◽  
Vol 14 (1) ◽  
pp. 5
Author(s):  
Samuel T. Thiele ◽  
Zakaria Bnoulkacem ◽  
Sandra Lorenz ◽  
Aurélien Bordenave ◽  
Niccolò Menegoni ◽  
...  
Keyword(s):  
Hyperspectral Data ◽  
Accurate Information ◽  
Spectral Features ◽  
Facies Architecture ◽  
Rugged Terrain ◽  
Hyperspectral Sensors ◽  
Aerial Vehicles ◽  
Shortwave Infrared ◽  
Seismic Scale ◽  
Infrared Data

While uncrewed aerial vehicles are routinely used as platforms for hyperspectral sensors, their application is mostly confined to nadir imaging orientations. Oblique hyperspectral imaging has been impeded by the absence of robust registration and correction protocols, which are essential to extract accurate information. These corrections are especially important for detecting the typically small spectral features produced by minerals, and for infrared data acquired using pushbroom sensors. The complex movements of unstable platforms (such as UAVs) require rigorous geometric and radiometric corrections, especially in the rugged terrain often encountered for geological applications. In this contribution we propose a novel correction methodology, and associated toolbox, dedicated to the accurate production of hyperspectral data acquired by UAVs, without any restriction concerning view angles or target geometry. We make these codes freely available to the community, and thus hope to trigger an increasing usage of hyperspectral data in Earth sciences, and demonstrate them with the production of, to our knowledge, the first fully corrected oblique SWIR drone-survey. This covers a vertical cliff in the Dolomites (Italy), and allowed us to distinguish distinct calcitic and dolomitic carbonate units, map the qualitative abundance of clay/mica minerals, and thus characterise seismic scale facies architecture.

scholarly journals Early Detection of Plant Viral Disease Using Hyperspectral Imaging and Deep Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 742
Author(s):  
Canh Nguyen ◽  
Vasit Sagan ◽  
Matthew Maimaitiyiming ◽  
Maitiniyazi Maimaitijiang ◽  
Sourav Bhadra ◽  
...  
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Early Detection ◽  
Convolutional Neural Network ◽  
Near Infrared ◽  
Hyperspectral Data ◽  
Viral Diseases ◽  
Support Vector ◽  
Spectral Features ◽  
Feature Spaces

Early detection of grapevine viral diseases is critical for early interventions in order to prevent the disease from spreading to the entire vineyard. Hyperspectral remote sensing can potentially detect and quantify viral diseases in a nondestructive manner. This study utilized hyperspectral imagery at the plant level to identify and classify grapevines inoculated with the newly discovered DNA virus grapevine vein-clearing virus (GVCV) at the early asymptomatic stages. An experiment was set up at a test site at South Farm Research Center, Columbia, MO, USA (38.92 N, −92.28 W), with two grapevine groups, namely healthy and GVCV-infected, while other conditions were controlled. Images of each vine were captured by a SPECIM IQ 400–1000 nm hyperspectral sensor (Oulu, Finland). Hyperspectral images were calibrated and preprocessed to retain only grapevine pixels. A statistical approach was employed to discriminate two reflectance spectra patterns between healthy and GVCV vines. Disease-centric vegetation indices (VIs) were established and explored in terms of their importance to the classification power. Pixel-wise (spectral features) classification was performed in parallel with image-wise (joint spatial–spectral features) classification within a framework involving deep learning architectures and traditional machine learning. The results showed that: (1) the discriminative wavelength regions included the 900–940 nm range in the near-infrared (NIR) region in vines 30 days after sowing (DAS) and the entire visual (VIS) region of 400–700 nm in vines 90 DAS; (2) the normalized pheophytization index (NPQI), fluorescence ratio index 1 (FRI1), plant senescence reflectance index (PSRI), anthocyanin index (AntGitelson), and water stress and canopy temperature (WSCT) measures were the most discriminative indices; (3) the support vector machine (SVM) was effective in VI-wise classification with smaller feature spaces, while the RF classifier performed better in pixel-wise and image-wise classification with larger feature spaces; and (4) the automated 3D convolutional neural network (3D-CNN) feature extractor provided promising results over the 2D convolutional neural network (2D-CNN) in learning features from hyperspectral data cubes with a limited number of samples.

scholarly journals Mapping Canopy Chlorophyll Content in a Temperate Forest Using Airborne Hyperspectral Data

2020 ◽  
Vol 12 (21) ◽  
pp. 3573
Author(s):  
J. Malin Hoeppner ◽  
Andrew K. Skidmore ◽  
Roshanak Darvishzadeh ◽  
Marco Heurich ◽  
Hsing-Chung Chang ◽  
...  
Keyword(s):  
Chlorophyll Content ◽  
Spectral Resolution ◽  
Near Infrared ◽  
Deciduous Forest ◽  
Mixed Forest ◽  
Hyperspectral Data ◽  
Least Squares Regression ◽  
Area Index ◽  
Management Interventions ◽  
Shortwave Infrared

Chlorophyll content, as the primary pigment driving photosynthesis, is directly affected by many natural and anthropogenic disturbances and stressors. Accurate and timely estimation of canopy chlorophyll content (CCC) is essential for effective ecosystem monitoring to allow for successful management interventions to occur. Hyperspectral remote sensing offers the possibility to accurately estimate and map canopy chlorophyll content. In the past, research has predominantly focused on the use of hyperspectral data on canopy chlorophyll content retrieval of crops and grassland ecosystems. Therefore, in this study, a temperate mixed forest, the Bavarian Forest National Park in Germany, was chosen as the study site. We compared different statistical models (narrowband vegetation indices (VIs), partial least squares regression (PLSR) and random forest (RF)) in their accuracy to predict CCC using airborne hyperspectral data. The airborne hyperspectral imagery was acquired by the AisaFenix sensor (623 bands; 3.5 nm spectral resolution in the visible near-infrared (VNIR) region, and 12 nm spectral resolution in the shortwave infrared (SWIR) region; 3 m spatial resolution) on July 6, 2017. In situ leaf chlorophyll content and leaf area index measurements were sampled from the upper canopy of coniferous, mixed, and deciduous forest stands in July and August 2017. The study yielded the highest retrieval accuracies with PLSR (root mean square error (RMSE) = 0.25 g/m2, R2 = 0.66). It further indicated specific spectral regions within the visible (390–400 nm and 470–540 nm), red edge (680–780 nm), near-infrared (1050–1100 nm) and shortwave infrared regions (2000–2270 nm) that were important for CCC retrieval. The results showed that forest CCC can be mapped with relatively high accuracies using image spectroscopy.

Hyperspectral Remote Sensing and Radiative Transfer Simulation as a Tool for Monitoring Coral Reef Health

2002 ◽  
Vol 36 (1) ◽  
pp. 4-13 ◽  
Author(s):  
Hiroya Yamano ◽  
Masayuki Tamura ◽  
Yoshimitsu Kunii ◽  
Michio Hidaka
Keyword(s):  
Remote Sensing ◽  
Coral Reef ◽  
Radiative Transfer ◽  
Feasibility Studies ◽  
Hyperspectral Remote Sensing ◽  
Hyperspectral Data ◽  
Dead Coral ◽  
Hyperspectral Sensors ◽  
Reef Health ◽  
Radiative Transfer Modeling

Recent advances in the remote sensing of coral reefs include hyperspectral remote sensing and radiative transfer modeling. Hyperspectral data can be regarded as continuous and the derivative spectroscopy is effective for extracting coral reef components, including sand, macroalgae, and healthy, bleached, recently dead, and old dead coral. Radiative transfer models are effective for feasibility studies of satellite or airborne remote sensing. Using these techniques, we simulate and analyze the apparent reflectance of coral reef benthic features associated with bleaching events, obtained by hyperspectral sensors on various platforms (ROV, boat, airplane, and satellite), and suggest that the coral reef health on reef flats can be discriminated precisely. Remote sensing using hyperspectral sensors should significantly contribute to mapping and monitoring coral reef health.

scholarly journals Estimating growth and photosynthetic properties of wheat grown in simulated saline field conditions using hyperspectral reflectance sensing and multivariate analysis

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Salah El-Hendawy ◽  
Nasser Al-Suhaibani ◽  
Majed Alotaibi ◽  
Wael Hassan ◽  
Salah Elsayed ◽  
...  
Keyword(s):  
Near Infrared ◽  
Agricultural Sector ◽  
Hyperspectral Data ◽  
Field Conditions ◽  
Least Squares Regression ◽  
Hyperspectral Reflectance ◽  
Full Spectrum ◽  
Salinity Levels ◽  
Shortwave Infrared ◽  
Related Trait

Abstract The timely estimation of growth and photosynthetic-related traits in an easy and nondestructive manner using hyperspectral data will become imperative for addressing the challenges of environmental stresses inherent to the agricultural sector in arid conditions. However, the handling and analysis of these data by exploiting the full spectrum remains the determining factor for refining the estimation of crop variables. The main objective of this study was to estimate growth and traits underpinning photosynthetic efficiency of two wheat cultivars grown under simulated saline field conditions and exposed to three salinity levels using hyperspectral reflectance information from 350–2500 nm obtained at two years. Partial least squares regression (PLSR) based on the full spectrum was applied to develop predictive models for estimating the measured parameters in different conditions (salinity levels, cultivars, and years). Variable importance in projection (VIP) of PLSR in combination with multiple linear regression (MLR) was implemented to identify important waveband regions and influential wavelengths related to the measured parameters. The results showed that the PLSR models exhibited moderate to high coefficients of determination (R2) in both the calibration and validation datasets (0.30–0.95), but that this range of R2 values depended on parameters and conditions. The PLSR models based on the full spectrum accurately and robustly predicted three of four parameters across all conditions. Based on the combination of PLSR-VIP and MLR analysis, the wavelengths selected within the visible (VIS), red-edge, and middle near-infrared (NIR) wavebands were the most sensitive to all parameters in all conditions, whereas those selected within the shortwave infrared (SWIR) waveband were effective for some parameters in particular conditions. Overall, these results indicated that the PLSR analysis and band selection techniques can offer a rapid and nondestructive alternative approach to accurately estimate growth- and photosynthetic-related trait responses to salinity stress.

scholarly journals Influence of the Sun Position and Platform Orientation on the Quality of Imagery Obtained from Unmanned Aerial Vehicles

2020 ◽  
Vol 12 (6) ◽  
pp. 1040 ◽  
Author(s):  
Aleksandra Sekrecka ◽  
Damian Wierzbicki ◽  
Michal Kedzierski
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Correction Method ◽  
Accurate Information ◽  
The Sun ◽  
Aerial Vehicles ◽  
The Difference ◽  
Third Dimension

Images acquired at a low altitude can be the source of accurate information about various environmental phenomena. Often, however, this information is distorted by various factors, so a correction of the images needs to be performed to recreate the actual reflective properties of the imaged area. Due to the low flight altitude, the correction of images from UAVs (unmanned aerial vehicles) is usually limited to noise reduction and detector errors. The article shows the influence of the Sun position and platform deviation angles on the quality of images obtained by UAVs. Tilting the camera placed on an unmanned platform leads to incorrect exposures of imagery, and the order of this distortion depends on the position of the Sun during imaging. An image can be considered in three-dimensional space, where the x and y coordinates determine the position of the pixel and the third dimension determines its exposure. This assumption is the basis for the proposed method of image exposure compensation. A three-dimensional transformation by rotation is used to determine the adjustment matrix to correct the image quality. The adjustments depend on the angles of the platform and the difference between the direction of flight and the position of the Sun. An additional factor regulates the value of the adjustment depending on the ratio of the pitch and roll angles. The experiments were carried out for two sets of data obtained with different unmanned systems. The correction method used can improve the block exposure by up to 60%. The method gives the best results for simple systems, not equipped with lighting compensation systems.

Sign in / Sign up

Export Citation Format

Share Document