scholarly journals An Improved Algorithm for Measuring Nitrate Concentrations in Seawater Based on Deep-Ultraviolet Spectrophotometry: A Case Study of the Aoshan Bay Seawater and Western Pacific Seawater

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 965
Author(s):  
Xingyue Zhu ◽  
Kaixiong Yu ◽  
Xiaofan Zhu ◽  
Juan Su ◽  
Chi Wu
Keyword(s):  
Weighted Average ◽  
Measuring Method ◽  
Western Pacific ◽  
Nitrate Concentrations ◽  
Deep Ultraviolet ◽  
Ultraviolet Spectrometer ◽  
Seawater Samples ◽  
Reflection Probe

Nowadays, it is still a challenge for commercial nitrate sensors to meet the requirement of high accuracy in a complex water. Based on deep-ultraviolet spectral analysis and a regression algorithm, a different measuring method for obtaining the concentration of nitrate in seawater is proposed in this paper. The system consists of a deuterium lamp, an optical fiber splitter module, a reflection probe, temperature and salinity sensors, and a deep-ultraviolet spectrometer. The regression model based on weighted average kernel partial least squares (WA-KPLS) algorithm together with corrections for temperature and salinity (TSC) is established. After that, the seawater samples from Western Pacific and Aoshan Bay in Qingdao, China with the addition of various nitrate concentrations are studied to verify the reliability and accuracy of the method. The results show that the TSC-WA-KPLS algorithm shows the best results when compared against the multiple linear regression (MLR) and ISUS (in situ ultraviolet spectrophotometer) algorithms in the temperatures range of 4–25 °C, with RMSEP of 0.67 µmol/L for Aoshan Bay seawater and 1.08 µmol/L for Western Pacific seawater. The method proposed in this paper is suitable for measuring the nitrate concentration in seawater with higher accuracy, which could find application in the development of in-situ and real-time nitrate sensors.

SenCity – Evaluating Users’ Experiences of Intelligent Lighting for Well-Being in Smart Cities

2018 ◽  
pp. 60-67
Author(s):  
Henrika Pihlajaniemi ◽  
Anna Luusua ◽  
Eveliina Juntunen
Keyword(s):  
Case Studies ◽  
Smart City ◽  
Smart Cities ◽  
Well Being ◽  
Evaluation Methods ◽  
Data Analyses ◽  
Sense Of Security ◽  
System Data

This paper presents the evaluation of usersХ experiences in three intelligent lighting pilots in Finland. Two of the case studies are related to the use of intelligent lighting in different kinds of traffic areas, having emphasis on aspects of visibility, traffic and movement safety, and sense of security. The last case study presents a more complex view to the experience of intelligent lighting in smart city contexts. The evaluation methods, tailored to each pilot context, include questionnaires, an urban dashboard, in-situ interviews and observations, evaluation probes, and system data analyses. The applicability of the selected and tested methods is discussed reflecting the process and achieved results.

Site specific agricultural soil management with the use of new technologies

2013 ◽  
Vol 16 (1) ◽  
pp. 59-67
Keyword(s):  
New Technologies ◽  
Digital Interface ◽  
Appropriate Treatment ◽  
Wide Range ◽  
Soil Variation ◽  
Soil Information ◽  
Remote Sensing Techniques ◽  
Agricultural Areas

<p>The Soil Science Institute of Thessaloniki produces new digitized Soil Maps that provide a useful electronic database for the spatial representation of the soil variation within a region, based on in situ soil sampling, laboratory analyses, GIS techniques and plant nutrition mathematical models, coupled with the local land cadastre. The novelty of these studies is that local agronomists have immediate access to a wide range of soil information by clicking on a field parcel shown in this digital interface and, therefore, can suggest an appropriate treatment (e.g. liming, manure incorporation, desalination, application of proper type and quantity of fertilizer) depending on the field conditions and cultivated crops. A specific case study is presented in the current work with regards to the construction of the digitized Soil Map of the regional unit of Kastoria. The potential of this map can easily be realized by the fact that the mapping of the physicochemical properties of the soils in this region provided delineation zones for differential fertilization management. An experiment was also conducted using remote sensing techniques for the enhancement of the fertilization advisory software database, which is a component of the digitized map, and the optimization of nitrogen management in agricultural areas.</p>

scholarly journals Influence of Hydrogeochemistry on Tunnel Drainage in Evaporitic Formations: El Regajal Tunnel Case Study (Aranjuez, Spain)

2021 ◽  
Vol 13 (3) ◽  
pp. 1505
Author(s):  
Ignacio Menéndez Pidal ◽  
Jose Antonio Mancebo Piqueras ◽  
Eugenio Sanz Pérez ◽  
Clemente Sáenz Sanz
Keyword(s):  
High Speed ◽  
Civil Engineering ◽  
Saturation Index ◽  
The Subject ◽  
Under Construction ◽  
Underground Flow ◽  
Very High ◽  
Over Time

Many of the large number of underground works constructed or under construction in recent years are in unfavorable terrains facing unusual situations and construction conditions. This is the case of the subject under study in this paper: a tunnel excavated in evaporitic rocks that experienced significant karstification problems very quickly over time. As a result of this situation, the causes that may underlie this rapid karstification are investigated and a novel methodology is presented in civil engineering where the use of saturation indices for the different mineral specimens present has been crucial. The drainage of the rock massif of El Regajal (Madrid-Toledo, Spain, in the Madrid-Valencia high-speed train line) was studied and permitted the in-situ study of the hydrogeochemical evolution of water flow in the Miocene evaporitic materials of the Tajo Basin as a full-scale testing laboratory, that are conforms as a whole, a single aquifer. The work provides a novel methodology based on the calculation of activities through the hydrogeochemical study of water samples in different piezometers, estimating the saturation index of different saline materials and the dissolution capacity of the brine, which is surprisingly very high despite the high electrical conductivity. The circulating brine appears unsaturated with respect to thenardite, mirabilite, epsomite, glauberite, and halite. The alteration of the underground flow and the consequent renewal of the water of the aquifer by the infiltration water of rain and irrigation is the cause of the hydrogeochemical imbalance and the modification of the characteristics of the massif. These modifications include very important loss of material by dissolution, altering the resistance of the terrain and the increase of the porosity. Simultaneously, different expansive and recrystallization processes that decrease the porosity of the massif were identified in the present work. The hydrogeochemical study allows the evolution of these phenomena to be followed over time, and this, in turn, may facilitate the implementation of preventive works in civil engineering.

scholarly journals Effects of Infills in the Seismic Performance of an RC Factory Building in Pakistan

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 276
Author(s):  
Nisar Ali Khan ◽  
Giorgio Monti ◽  
Camillo Nuti ◽  
Marco Vailati
Keyword(s):  
Numerical Model ◽  
Construction Materials ◽  
Building Codes ◽  
Construction Technique ◽  
Infill Walls ◽  
Mortar Strength ◽  
Materials Used ◽  
Seismic Response Of Buildings

Infilled reinforced concrete (IRC) frames are a very common construction typology, not only in developing countries such as Pakistan but also in southern Europe and Western countries, due to their ease of construction and less technical skills required for the construction. Their performance during past earthquakes has been in some cases satisfactory and in other cases inadequate. Significant effort has been made among researchers to improve such performance, but few have highlighted the influence of construction materials used in the infill walls. In some building codes, infills are still considered as non-structural elements, both in the design of new buildings and, sometimes, in the assessment of existing buildings. This is mainly due to some difficulties in modeling their mechanical behavior and also the large variety of typologies, which are difficult to categorize. Some building codes, for example, Eurocode, already address the influence of infill walls in design, but there is still a lack of homogeneity among different codes. For example, the Pakistan building code (PBC) does not address infills, despite being a common construction technique in the country. Past earthquake survey records show that construction materials and infill types significantly affect the seismic response of buildings, thus highlighting the importance of investigating such parameters. This is the object of this work, where a numerical model for infill walls is introduced, which aims at predicting their failure mode, as a function of some essential parameters, such as the friction coefficient between mortar and brick surface and mortar strength, usually disregarded in previous models. A comprehensive case study is presented of a three-story IRC frame located in the city of Mirpur, Pakistan, hit by an earthquake of magnitude 5.9 on 24 September 2019. The results obtained from the numerical model show good agreement with the damage patterns observed in situ, thus highlighting the importance of correctly modeling the infill walls when seismically designing or assessing Pakistani buildings that make use of this technology.

scholarly journals Practical Functioning of a Sustainable Urban Complex with a Park—The Case Study of Stavros Niarchos Foundation Cultural Center in Athens

2021 ◽  
Vol 13 (9) ◽  
pp. 5071
Author(s):  
Beata Makowska
Keyword(s):  
Urban Space ◽  
Public Spaces ◽  
Green Spaces ◽  
Cultural Center ◽  
Urban Green ◽  
Urban Green Spaces ◽  
Urban Complex

Intensive urban development has created a shortage of urban green areas. The need to economically plan and use urban green spaces has fueled the redefinition of public spaces and parks so as to provide the residents with both recreation and relaxation facilities, as well as a forum for contact with culture. This paper discusses the case of the Stavros Niarchos Foundation Cultural Center (SNFCC) in the Kallithea district on the outskirts of Athens, near the Mediterranean Sea. It fills a gap in the research on the aspects of the practical functioning of such facilities. The methodology used in the research included an analysis of the literature, the SNFCC’s reports, and an in situ survey. The cultural center hosts a number of events aimed at promoting Greece’s natural and cultural heritage. The paper includes a detailed analysis of the events organized by the SNFCC in the period 2017–2020 and their immense impact on residents. The aim of the study is to show that the creation of the SNFCC with the park areas has functioned as a factor contributing to the improvement of the quality of urban space and the quality of life of the city’s inhabitants. The paper’s conclusions indicate that the sustainable SNFCC project, which fulfils the urban ecology criteria, has been very well received by the visitors—citizens and tourists alike. A program-centered innovation introduced by the SN Park has added great value to their lives. The project contributes to economic and cultural growth, as well as the protection and promotion of heritage.

Effects of corrosion on a steel bowstring bridge in marine environment: A case-study of assessment and retrofit

2021 ◽  
Vol 16 (4) ◽  
pp. 121-137
Author(s):  
Michele Fabio Granata
Keyword(s):  
Corrosion Protection ◽  
Marine Environment ◽  
Spray Coating ◽  
Thermal Spray Coating ◽  
In Situ Tests ◽  
Limit States ◽  
Intervention Measures ◽  
Near Future

The case-study of a steel bowstring bridge set in a marine environment and highly damaged by corrosion is presented. The bridge was built in 2004 and was repainted for corrosion protection in 2010. Despite the recent construction and the maintenance interventions, many structural elements like hangers are highly damaged by corrosion with decreasing performance in terms of serviceability and ultimate limit states. A deep investigation was carried out in order to assess the bridge and to establish the necessary retrofit actions to be carried out in the near future. In-situ tests reveal the reduced performance of the original steel in terms of strength and corrosion protection, together with the inefficiency of the successive maintenance interventions. The paper presents assessment of the bridge and retrofit measures, including replacement of the hangers and galvanization through thermal spray coating technology, in order to increase its service life. The results of the investigations and the intervention measures are outlined and discussed.

scholarly journals Challenges of Mechanochemistry: Is In Situ Real-Time Quantitative Phase Analysis Always Reliable? A Case Study of Organic Salt Formation

2017 ◽  
Vol 4 (9) ◽  
pp. 1700132 ◽  
Author(s):  
Adam A. L. Michalchuk ◽  
Ivan A. Tumanov ◽  
Sumit Konar ◽  
Simon A. J. Kimber ◽  
Colin R. Pulham ◽  
...  
Keyword(s):  
Real Time ◽  
Phase Analysis ◽  
Organic Salt ◽  
Quantitative Phase Analysis ◽  
Salt Formation ◽  
Quantitative Phase

Rheed Studies of a-Axis Oriented DyBa2Cu3O7 Films Grown by All-MBE

1997 ◽  
Vol 502 ◽  
Author(s):  
Ivan Bozovic ◽  
J. N. Eckstein ◽  
Natasha Bozovic ◽  
J. O'Donnell
Keyword(s):  
Phase Transitions ◽  
Secondary Phase ◽  
Atomic Layer ◽  
High Energy ◽  
Layer By Layer ◽  
Growth Modes ◽  
Flow Surface ◽  
Surface Phase Transitions

ABSTRACTReal-time, in-situ surface monitoring by reflection high-energy electron diffraction (RHEED) has been the key enabling component of atomic-layer-by-layer molecular beam epitaxy (ALL-MBE) of complex oxides. RHEED patterns contain information on crystallographic arrangements and long range order on the surface; this can be made quantitative with help of numerical simulations. The dynamics of RHEED patterns and intensities reveal a variety of phenomena such as nucleation and dissolution of secondary-phase precipitates, switching between growth modes (layer-by-layer, step-flow), surface phase transitions (surface reconstruction, roughening, and even phase transitions induced by the electron beam itself), etc. Some of these phenomena are illustrated here, using as a case study our recent growth of atomically smooth a-axis oriented DyBa2Cu3O7 films.

Sign in / Sign up

Export Citation Format

Share Document