scholarly journals The Optical Signal-to-Crosstalk Ratio for the MBA(N, e, g) Switching Fabric †

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1534
Author(s):  
Remigiusz Rajewski
Keyword(s):  
Optical Switching ◽  
Essential Feature ◽  
Optical Signal ◽  
Point Of View ◽  
Signal Quality ◽  
Switching Networks ◽  
Optical Elements ◽  
Optical Signals ◽  
Switching Fabric

The banyan-type switching networks, well known in switching theory and called the logdN switching fabrics, are composed of symmetrical switching elements of size d×d. In turn, the modified baseline architecture, called the MBA(N,e,g), is only partially built from symmetrical optical switching elements, and it is constructed mostly from asymmetrical optical switching elements. Recently, it was shown that the MBA(N,e,g) structure requires a lower number of passive as well as active optical elements than the banyan-type switching fabric of the same capacity and functionality, which makes it an attractive solution. However, the optical signal-to-crosstalk ratio for the MBA(N,e,g) was not investigated before. Therefore, in this paper, the optical signal-to-crosstalk ratio in the MBA(N,e,g) was determined. Such crosstalk influences the output signal’s quality. Thus, if such crosstalk is lower, the signal quality is better. The switching fabric proposed in the author’s previous work has lower optical signal losses than a typical Beneš and banyan-type switching networks of this same capacity and functionality, which gives better quality of transmitted optical signals at the switching node’s output. The investigated MBA(N,e,g) architecture also contains one stage fewer than banyan-type network of the same capacity, which is an essential feature from the optical switching point of view.

Optical Transport Network

2015 ◽  
pp. 28-58
Keyword(s):  
Refractive Index ◽  
Nonlinear Refractive Index ◽  
Power Level ◽  
Nonlinear Effects ◽  
Optical Signal ◽  
Stimulated Scattering ◽  
Optical Signals ◽  
Optical Transport Network ◽  
Scattering Effects

The purpose of this chapter is to discuss two major categories of nonlinear effects related either to nonlinear refractive index or to nonlinear stimulated scattering effects. The effects related to nonlinear refractive index occur due to the dependence of the refractive index on the optical signal intensity. On the other hand, stimulated scattering effects are caused by interaction between light and material. As many wavelength signal channels travel through the optical fiber, they encounter many of those nonlinear effects impairments that affect the signal power level and hence degrade sharply the quality of the signal resulting in interference among signals carried by different wavelength channels. Therefore, before delving into the optical transmission performance issues, a physical picture of how optical signals behave in the presence of the most important nonlinear effect impairments is drawn.

Infra-Red Photo-Detectors Monolithically Integrated with Silicon-Based Photonic Circuits

2005 ◽  
Vol 869 ◽  
Author(s):  
Jonathan D B Bradley ◽  
Paul E Jessop ◽  
Andrew P Knights
Keyword(s):  
Optical Switching ◽  
Cost Effective ◽  
Optical Signal ◽  
Photonic Circuits ◽  
Optical Signals ◽  
Rib Waveguide ◽  
Silicon Waveguide ◽  
Infra Red ◽  
Photo Detectors ◽  
Silicon Based

AbstractThe development of monolithic silicon photonic systems has been the subject of intense research over the last decade. In addition to passive waveguiding structures suitable for DWDM applications, integration of electrical and optical functionality has yielded devices with the ability to dynamically attenuate, switch and modulate optical signals. Despite this significant progress, much higher levels of integration and increased functionality are required if silicon is to dominate as a substrate for photonic circuit fabrication as it does in the microelectronic industry. In particular, there exists a requirement for efficient silicon-based optical sources and detectors which are compatible with wavelengths of 1.3 and 1.5μm. While a great deal of work has focussed on the development of silicon-based optical sources, there has been less concentrated effort on the development of a simple, easily integrated detector technology. We describe here the design, fabrication and characterization of a wholly monolithic silicon waveguide optical detector, utilizing an integrated p+-u-n+ diode, which has significant response to optical signals at the communication wavelength of 1.54μm. Measurable infra-red response is induced via the controlled introduction of mid-gap electronic levels within the rib waveguide. This approach is completely compatible with ULSI fabrication. The requirement for the detectors to be integrated with a rib waveguide and hence the guarantee of a long optical signal-device interaction, results in electrical signals of several μAs, even for deep-levels with a small optical absorption cross-section. Further, the rise and fall time of the detectors is compatible with current monolithic, silicon device based, optical switching and modulation operating in the MHz regime. These results suggest that these detectors offer a cost-effective route to signal monitoring in integrated photonic circuits.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Physical capital stock, technological upgrading and modernisation in Hungary

2005 ◽  
Vol 55 (2) ◽  
pp. 201-221 ◽  
Author(s):  
Andrea Szalavetz
Keyword(s):  
Capital Accumulation ◽  
Physical Capital ◽  
Developed Countries ◽  
Point Of View ◽  
Technology Generation ◽  
Development Policies ◽  
Specific Factors ◽  
Physical Capital Accumulation

This paper discusses the relation between the quality and quantity indicators of physical capital and modernisation. While international academic literature emphasises the role of intangible factors enabling technology generation and absorption rather than that of physical capital accumulation, this paper argues that the quantity and quality of physical capital are important modernisation factors, particularly in the case of small, undercapitalised countries that recently integrated into the world economy. The paper shows that in Hungary, as opposed to developed countries, the technological upgrading of capital assets was not necessarily accompanied by the upgrading of human capital i.e. the thesis of capital skill complementarity did not apply to the first decade of transformation and capital accumulation in Hungary. Finally, the paper shows that there are large differences between the average technological levels of individual industries. The dualism of the Hungarian economy, which is also manifest in terms of differences in the size of individual industries' technological gaps, is a disadvantage from the point of view of competitiveness. The increasing differences in the size of the technological gaps can be explained not only with industry-specific factors, but also with the weakness of technology and regional development policies, as well as with institutional deficiencies.

Flouride and Nitrate Status of Some Ground Waters in Chittor District of Rajasthan State (India)

2018 ◽  
Vol 6 (9) ◽  
pp. 119
Author(s):  
Trapti Sharma ◽  
R. P. Nagar ◽  
R. C. Gaur ◽  
Pooja Gupta ◽  
Charanjit Kaur
Keyword(s):  
Point Of View ◽  
World Health ◽  
Indian Council ◽  
Standard Methods ◽  
Ground Waters ◽  
Drinking Waters ◽  
Health Organization ◽  
Research World ◽  
Drinking Purpose

In Rajasthan state the ground waters of some areas like Ramganj-mandi, Morak, Barmer, Jaisalmer, Chittor and Udaipur etc. are susceptible from drinking point of view.To test the quality of groundwater in Chittor district 14, ground water samples were collected from various places and analyzed for pH, E.C., Fluoride and Nitrate parameters by standard methods (A.P.H. A., Washington, USA, 1995). The study revealed that none of the ground waters was found suitable completely from drinking point of view. Some are having electrical conductivity > 1.4 dS/m, some are having pH >8.5, some area having fluoride >1.5 ppm and some are having nitrate>45 ppm. These are the limits of various parameters permitted by various International authorities like Bureau of Indian Standard, Indian Council of Medical Research,world health Organization etc. for drinking waters. So, it is recommended to the residents of above areas to use water for drinking purpose only after reverse osmosis or adopting suitable method of removing excess of Fluoride and Nitrate for drinking water to avoid unwanted pathogenic diseases harmful for human health.

A Futures Study on the Quality Of Life from the Point Of View of Iranian Youth

2017 ◽  
Vol 14 (2) ◽  
pp. 1
Author(s):  
Sina Saeedy ◽  
Mojtaba Amiri ◽  
Mohammad Mahdi Zolfagharzadeh ◽  
Mohammad Rahim Eyvazi
Keyword(s):  
Quality Of Life ◽  
Life Satisfaction ◽  
Mixed Model ◽  
Satisfaction With Life ◽  
Point Of View ◽  
Human Society ◽  
Futures Studies ◽  
The Social ◽  
The University

Quality of life and satisfaction with life as tightly interconnected concepts have become of much importance in the urbanism era. No doubt, it is one of the most important goals of every human society to enhance a citizen’s quality of life and to increase their satisfaction with life. However, there are many signs which demonstrate the low level of life satisfaction of Iranian citizens especially among the youth. Thus, considering the temporal concept of life satisfaction, this research aims to make a futures study in this field. Therefore, using a mixed model and employing research methods from futures studies, life satisfaction among the students of the University of Tehran were measured and their views on this subject investigated. Both quantitative and qualitative data were analysed together in order to test the hypotheses and to address the research questions on the youth discontentment with quality of life. Findings showed that the level of life satisfaction among students is relatively low and their image of the future is not positive and not optimistic. These views were elicited and discussed in the social, economic, political, environmental and technological perspectives. Keywords:  futures studies, quality of life, satisfaction with life, youth

FUNDAMENTAL AND APPLIED SCIENTIFIC RESEARCH: сб.науч.тр./ OEAPS Inc.; редкол.: Флора Бертран (отв.ред.) [и др.]. - Берлин, Германия : OEAPS Inc., 2018. - 58 С.

2018 ◽  
Author(s):  
Мария Григорьевна Алпатова ◽  
Мария Игоревна Щеглова ◽  
Elmira Kalybaevna Adil’bekova ◽  
Nuradin Alibaev ◽  
Arunas Svitojus
Keyword(s):  
Service Sector ◽  
Applied Research ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Main Criterion ◽  
The Public ◽  
Peer Reviewers ◽  
Verification Process

The conference is a major international forum for analyzing and discussing trends and approaches in research in the field of basic science and applied research. We provide a platform for discussions on innovative, theoretical and empirical research. The form of the conference: in absentia, without specifying the form in the collection of articles. Working languages: Russian, English Doctors and candidates of science, scientists, specialists of various profiles and directions, applicants for academic degrees, teachers, graduate students, undergraduates, students are invited to participate in the conference. There is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final. The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important. Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

FUNDAMENTAL AND APPLIED SCIENTIFIC RESEARCH April 2019: сб.науч.тр./ OEAPS Inc.; редкол.: Флора Бертран (отв.ред.) [и др.]. - Берлин, Германия : OEAPS Inc., 2019. - 98 C.

2019 ◽  
Author(s):  
Изабелла Станиславовна Чибисова ◽  
Диана Ильгизаровна Шарипова ◽  
Альфия Галиевна Зулькарнаева ◽  
Ксения Александровна Дулова ◽  
Садег Амирзадеган ◽  
...  
Keyword(s):  
Service Sector ◽  
Applied Research ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Main Criterion ◽  
The Public ◽  
Peer Reviewers ◽  
Verification Process

The conference is a major international forum for analyzing and discussing trends and approaches in research in the field of basic science and applied research. We provide a platform for discussions on innovative, theoretical and empirical research. The form of the conference: in absentia, without specifying the form in the collection of articles. Working languages: Russian, English Doctors and candidates of science, scientists, specialists of various profiles and directions, applicants for academic degrees, teachers, graduate students, undergraduates, students are invited to participate in the conference. There is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final. The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important. Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

Research on the Network Fault in Multistage Multi-plane Optical Switching Fabric

2014 ◽  
Vol 35 (12) ◽  
pp. 2978-2984
Author(s):  
Xi-lian Chen ◽  
Bo Xu ◽  
Yu-meng Zhou ◽  
Zhan-qi Cui ◽  
Kun Qiu
Keyword(s):  
Optical Switching ◽  
Switching Fabric ◽  
Network Fault
Sign in / Sign up

Export Citation Format

Share Document