scholarly journals Sustainability and Environmental Inequality: Effects of Animal Husbandry Pollution in China

2019 ◽  
Vol 11 (17) ◽  
pp. 4576 ◽  
Author(s):  
Yujie Yang ◽  
Weixin Luan ◽  
Yunan Xue

Environmental inequality in animal husbandry is an important issue that matters in sustainable livestock production and environmental sustainability. In this context, the objective of this study is to measure and analyze the chemical oxygen demand (COD) discharge inequality from animal husbandry in the Liaoning province in China, as a case study in environmental inequality. Using the pollutant discharge coefficient method and environmental inequality indices, the study looks specifically at the impacts on unequal distribution and unequal economic efficiency in Liaoning in the period 2000 to 2016. The study explores the determinants of COD discharge inequality by constructing panel threshold regression models. The major findings are as follows. First, there is COD discharge inequality in distribution and in economic efficiency in Liaoning, and these were not reduced over time, despite a decline in the absolute quantity of COD discharge after 2013. Second, the impact of COD discharge inequality in economic efficiency lasted longer and was more serious across Liaoning compared with COD discharge inequality in distribution. Third, the quantitative upgrading of the agricultural industrial structure did not significantly reduce COD discharge inequality, and even led to a rise in inequality, especially in terms of economic efficiency. Ultimately, regional economic development turned out to be the key factor in inequality reduction. In addition, improvement in public fiscal support for science and technology also led to greater reduction in inequality.

Water ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 352
Author(s):  
Brian Brennan ◽  
Burcu Gunes ◽  
Matthew R. Jacobs ◽  
Jenny Lawler ◽  
Fiona Regan

The composition of challenging matrices must be fully understood in order to determine the impact of the matrix and to establish suitable treatment methods. Rendering condensate wastewater is a complex matrix which is understudied. It is produced when the vapour from rendering facilities (heat processing of slaughterhouse waste material) is cooled as a liquid for discharge. This study offers a full physicochemical characterisation of rendering condensate wastewater and its potential for valorisation via production of viable by-products. A study of seasonal variation of levels of dissolved oxygen, chemical oxygen demand, total nitrogen and ammonia was carried out on the wastewater. The results show that the wastewater was high strength all year-round, with a chemical oxygen demand of 10,813 ± 427 mg/L and high concentrations of total Kjeldahl nitrogen (1745 ± 90 mg/L), ammonia (887 ± 21 mg/L), crude protein (10,911 ± 563 mg/L), total phosphorous (51 ± 1 mg/L), fat and oil (11,363 ± 934 mg/L), total suspended solids (336 ± 73 mg/L) and total dissolved solids (4397 ± 405 mg/L). This characterisation demonstrates the requirement for adequate treatment of the condensate before releasing it to the environment. While there is a reasonably constant flow rate and dissolved oxygen level throughout the year, higher chemical oxygen demand, total nitrogen and ammonia levels were found in the warmer summer months. From this study, rendering condensate slaughterhouse wastewater is shown to have potential for production of marketable goods. These products may include ammonium sulphate fertilizer, protein supplements for animal feeds and recovery of acetic acid calcium hydroxyapatite, thus enhancing both the financial and environmental sustainability of slaughterhouse operations. This work demonstrates a valuable assessment of a complex wastewater, while taking advantage of on-site access to samples and process data to inform the potential for wastewater reuse.


2021 ◽  
Author(s):  
Tihomir Tomic ◽  
Irma Kremer ◽  
Daniel Rolph Schneider

Abstract Waste management systems are modelled to provide a public waste management service and need to be able to meet environmental sustainability requirements at a cost that is acceptable to system users/citizens. Overall environmental, economic, and/or socio-economic sustainability of waste management in previous publications is done through independent analyses and comparisons of obtained results or through multicriterial ranking of different alternatives where final results do not have a meaningful physical significance and cannot be interpreted independently. At the same time, those analysis either neglect time dependant changes by focusing on moment in time, or take into account changes in some timeframe changes but report only ranking focused single-score results, thus, results neglect time-dependent developments. All of these approaches are lacking some information needed for informed decision-making and/or are difficult to understand by wider groups of people. Thus, in this study, link between economic and environmental sustainability is analysed through newly defined single-score Economic Efficiency of Resource Recovery (EERR) index that shows the specific system cost for achieving identified resource recovery, while legislation based time dependent changes are taken into account through successive analyses for legislative most important years. This approach can be used for benchmarking the overall (environmental and economic) sustainability trends, while its graphical representation enables easier presentation of sustainability results and can be used for easier comparison of possible solutions and decision-making. The results show that the quality decision-making process needs to take into account the impact of expected changes on overall sustainability and evaluate how they will affect the actual perception of used technologies. In this context, it is shown that overall changes in sustainability, in comparison to the existing perception, can significantly change, depending on which technologies the system is based on.


Complexity ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Xingling Huang ◽  
Guoping Li ◽  
Jianguo Liu

This study constructs a theoretical model and empirical framework concerning how spatial structure affects economic efficiency using data on the Beijing-Tianjin-Hebei (BTH) megaregion between 2008 and 2017. The study finds the following: ① the development of the internal spatial structure of the BTH urban agglomeration is unequal. The populations of most cities in the urban agglomeration are still in a dispersed state. Although urban populations have tended to agglomerate around multiple subcenter units in the cities, the trend towards population agglomeration around city centers is not found to be significant. ② The total factor productivity (TFP) of the BTH urban agglomeration was not high in most years between 2008 and 2017, showing a fluctuating downward trend overall. The TFP of the urban agglomeration showed differential regional patterns. The decline of TFP growth in the BTH urban agglomeration is mainly due to declining technological progress, technological efficiency, and scale efficiency. Resource input remains the major driving force behind the development of the BTH megaregion. ③ Concerning how the spatial structure of the urban agglomeration affected economic efficiency, the study finds that primacy, urban Gini index, urban population size, human capital, informatization level, industrial structure, and science and technology levels have positive effects on economic efficiency, whereas dispersion, governmental role, economic openness, and land input have negative effects. This study has several policy implications. Achieving coordinated and integrated development of the BTH urban agglomeration will require constructing a scientific and regional spatial system, improving the development levels of regional central cities, divesting Beijing of noncapital functions, and reshaping the industrial layout of the BTH megaregion in an orderly manner, while continuously improving the internal hierarchical structure of urban agglomeration and strengthening intercity economic connections.


Atmosphere ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 119
Author(s):  
Chenlu Tao ◽  
Zhilin Liao ◽  
Mingxing Hu ◽  
Baodong Cheng ◽  
Gang Diao

The conflict between economic growth and environmental pollution has become a considerable bottleneck to future development throughout the world. The industrial structure may become the possible key factor in resolving the contradiction. Using the daily data of air quality from January to April in 2019 and 2020, we used the DID model to identify the effects of industrial structure on air quality by taking the COVID-19 pandemic as a quasi-experiment. The results show that, first, the impact of profit of the secondary industry on air quality is ten times higher than that of the tertiary industry. Therefore, the secondary industry is the main factor causing air pollution. Second, the effect of the reduction in the secondary industry on the improvement of air quality is better than that of the tertiary industry in Beijing. Therefore, the implementation of Beijing’s non-capital function relief policy is timely and reasonable, and the adjustment of the industrial structure is effective in the improvement of air quality. Third, PM2.5, NO2, and CO are affected by the secondary and tertiary industries, where PM2.5 is affected most seriously by the second industry. Therefore, the transformation from the secondary industry to the tertiary industry can not only solve the problem of unemployment but also relieve the haze. Fourth, the result of O3 is in opposition to other pollutants. The probable reason is that the decrease of PM2.5 would lead to an increase in the O3 concentration. Therefore, it is difficult to reduce O3 concentrationby production limitation and it is urgent to formulate scientific methods to deal with O3 pollution. Fifth, the air quality in the surrounding areas can also influence Beijing. As Hebei is a key area to undertake Beijing’s industry, the deterioration of its air quality would also bring pressure to Beijing’s atmospheric environment. Therefore, in the process of industrial adjustment, the selection of appropriate regions for undertaking industries is very essential, which is worth our further discussion.


2009 ◽  
pp. 54-69 ◽  
Author(s):  
A. Shastitko ◽  
S. Avdasheva ◽  
S. Golovanova

The analysis of competition policy under economic crisis is motivated by the fact that competition is a key factor for the level of productivity. The latter, in its turn, influences the scope and length of economic recession. In many Russian markets buyers' gains decline because of the weakness of competition, since suppliers are reluctant to cut prices in spite of the decreasing demand. Data on prices in Russia and abroad in the second half of 2008 show asymmetric price rigidity. At least two questions are important under economic crisis: the 'division of labor' between pro-active and protective tools of competition policy and the impact of anti-crisis policy on competition. Protective competition policy is insufficient in transition economy, especially in the days of crisis it should be supplemented with the well-designed industrial policy measures which do not contradict the goals of competition. The preferable tools of anti-crisis policy are also those that do not restrain competition.


2020 ◽  
Vol 25 (1) ◽  
pp. 25
Author(s):  
Enik Maslahah

<p>Purun is a typical plant that grow in peatland area that has important functions for people living in peatland area. The availability of purun is now decreasing due to changes in land management and environmental destruction. Almost all of the plantation commodities in the peatlands area, management of peatlands in the forestry, agriculture, plantation and fisheries sectors apply exploitative and pragmatic methods, while ignoring environmental sustainability. Furthermore, environmental damage also occurs due to disasters such as forest and land fires that often occur in peatland areas in Indonesia. One of the damages happen to peatland area is the damage and scarcity of purun. As users and beneficiaries of purun, women become the affected group that face  the impact of peatland destruction. This paper describes the experiences and efforts of women in peatland areas to restore land and restore the existence of purun in their villages.</p><p> </p>


On the grey forest medium-loamy soil of Vladimir Opolye region we have studied the impact of various methods of basic cultivation and fertilizer systems on the activity of redox and hydrolytic enzymes: ure-ase (nitrogen cycle), invertase (carbon cycle), phosphatase (phosphorus cycle), and catalase, involved in the cycle of carbon in the soil. The second humus horizon with capacity of 19-24cm was found at the depth of 20 - 21 cm on the experimental field. We have studied three modes of basic soil cultivation: an-nual shallow flat plowing (6-8 cm), annual deep flat plowing (20-22 cm), and annual moldboard plowing (20-22 cm) with normal and intensive application of fertilizers. The most enzymatically active layer is 0-20 cm. No relevant difference has been found in the level of enzymes activity between variants of basic soil treatment. Activity of enzymes increases with application of fertilizers on the intensive background. In agrogenic soils, soil enzymatic activity is lower on average by 16-22% compared to the soil of the res-ervoir. The biggest negative transformation of activity has been observed at the urease enzyme (up to 50%). With annual moldboard plowing on the intensive backgroung, enzyme activity has been close to the natural level – 98.4%. Catalise and invertase activity in this case were found to be higher (105 and 116% respectively) than that of natural analogues. Activity of enzymes increases with intensive application of fertilizers as compared with normal background. This is particularly evident with 6-8cm deep beardless plowing and 20-22cm deep moldboard plowing. In general, the obtained biochemical indicators charac-terize the highest environmental sustainability of this variation within our research.


Author(s):  
Rodrigo Cueva ◽  
Guillem Rufian ◽  
Maria Gabriela Valdes

The use of Customer Relationship Managers to foster customers loyalty has become one of the most common business strategies in the past years.  However, CRM solutions do not fill the abundance of happily ever-after relationships that business needs, and each client’s perception is different in the buying process.  Therefore, the experience must be precise, in order to extend the loyalty period of a customer as much as possible. One of the economic sectors in which CRM’s have improved this experience is retailing, where the personalized attention to the customer is a key factor.  However, brick and mortar experiences are not enough to be aware in how environmental changes could affect the industry trends in the long term.  A base unified theoretical framework must be taken into consideration, in order to develop an adaptable model for constructing or implementing CRMs into companies. Thanks to this approximation, the information is complemented, and the outcome will increment the quality in any Marketing/Sales initiative. The goal of this article is to explore the different factors grouped by three main domains within the impact of service quality, from a consumer’s perspective, in both on-line and off-line retailing sector.  Secondly, we plan to go a step further and extract base guidelines about previous analysis for designing CRM’s solutions focused on the loyalty of the customers for a specific retailing sector and its product: Sports Running Shoes.


Sign in / Sign up

Export Citation Format

Share Document