scholarly journals Effect of Emitter Modifications on Spray Performance of a Solid Set Canopy Delivery System in a High-Density Apple Orchard

2021 ◽  
Vol 13 (23) ◽  
pp. 13248
Author(s):  
Rakesh Ranjan ◽  
Rajeev Sinha ◽  
Lav R. Khot ◽  
Gwen-Alyn Hoheisel ◽  
Matthew J. Grieshop ◽  
...  

Optimally configured solid set canopy delivery systems (SSCDS) can provide adequate spray performance in high-density apple orchards with a minimized risk of off-target pesticide drift. SSCDS configured in a shower-down emitter arrangement have been reported to be the simplest and most economical system. However, existing off-the-shelf emitters used in shower-down configurations have resulted in minimal deposition in lower canopy zones. Therefore, this study was focused on the modifications of off-the-shelf emitters to obtain a desirable spray pattern for adequate spray deposition in all the canopy zones. The modifications include redesigning the impact plate of two existing micro-emitters. Field tests were conducted to evaluate the spray performance of SSCDS with the non-modified emitters (treatment: SD1 and SD3) and contrast the results with modified emitters (treatment: SD2 and SD4). While the treatments SD1 and SD3 had off-the-shelf emitters with swivel plate and static spreader, respectively, the treatment SD2 and SD4 had similar emitters with modified impactor plates. In each treatment block, the apple canopy was divided into six zones and sprayed with a 500 ppm fluorescent tracer solution. Mylar cards and water-sensitive paper samplers were placed on the adaxial and abaxial leaf surfaces in each canopy zone to quantify spray deposition and coverage, respectively. The SSCDS treatments retrofitted with modified emitters, i.e., SD2 and SD4, were observed to have uniform and numerically higher deposition and coverage compared to SD1 and SD3. The SSCDS treatment with modified static spreader (i.e., SD4) resulted in the highest overall spray deposition (1405.7 ± 156.4 ng cm−2 [mean ± standard error]) with improved mid (1121.6 ± 186.9 ng cm−2) and bottom (895.6 ± 149.3 ng cm−2) canopy deposition. Overall, the proposed emitter modification assisted in improved SSCDS spray performances and may be a way forward toward large-scale emplacements of such systems.

2021 ◽  
Vol 11 (2) ◽  
pp. 709
Author(s):  
Rakesh Ranjan ◽  
Rajeev Sinha ◽  
Lav R. Khot ◽  
Gwen-Alyn Hoheisel ◽  
Matthew Grieshop ◽  
...  

Solid Set Canopy Delivery Systems (SSCDS) are fixed agrochemical delivery systems composed of a network of micro-sprayers/nozzles distributed in perennial crop canopies. A previous SSCDS design composed of a 3-tier configuration using hollow cone sprayer nozzles has been shown to provide excellent coverage and deposition in high-density apple orchards. However, the hollow cone nozzles substantially increases the initial system installation costs. This study evaluated the effect of irrigation micro-emitters replacement on spray deposition, coverage and off-target drift. A micro-emitter used in greenhouse irrigation systems was duly modified to enhance its applicability with SSCDS. After laboratory assessment and optimization of the micro-emitters, a replicated field study was conducted to compare 3-tier SSCDS configured with either of modified irrigation micro-emitters or traditional hollow cone nozzles. Canopy deposition and off target drift were evaluated using a 500 ppm fluorescent tracer solution sprayed by the field installed systems and captured on mylar collectors. Spray coverage was evaluated using water sensitive papers. The overall canopy deposition and coverage for treatment configured with modified irrigation micro-emitters (955.5 ± 153.9 [mean ± standard error of mean] ng cm−2 and 22.7 ± 2.6%, respectively) were numerically higher than the hollow cone nozzles (746.2 ± 104.7 ng cm−2 and 19.0 ± 2.8%, respectively). Moreover, modified irrigation micro-emitter SSCDS had improved spray uniformity in the canopy foliage and on either side of leaf surfaces compared to a hollow cone nozzle. Ground and aerial spray losses, quantified as deposition, were numerically lower for the modified irrigation micro-emitter (121.8 ± 43.4 ng cm−2 and 0.7 ± 0.1 ng cm−2, respectively) compared to the traditional hollow cone nozzle (447.4 ± 190.9 ng cm−2 and 3.2 ± 0.4 ng cm−2, respectively). Overall, the modified irrigation micro-emitter provided similar or superior performance to the traditional hollow cone nozzle with an estimated 12 times reduction in system installation cost.


2020 ◽  
Vol 63 (1) ◽  
pp. 37-48 ◽  
Author(s):  
Rajeev Sinha ◽  
Rakesh Ranjan ◽  
Haitham Y. Bahlol ◽  
Lav R. Khot ◽  
Gwen-Alyn Hoheisel ◽  
...  

Abstract. Solid set canopy delivery systems (SSCDS) are fixed spray systems that consist of a network of permanently plumbed emitters in high-density tree-fruit orchard canopies. Most of the previously configured SSCDS worked on the principle of hydraulic spray delivery (HSD), which may not be suitable for large-scale installation due to the drop in operating pressure caused by frictional losses in the spray lines. Therefore, a pneumatic spray delivery (PSD) based SSCDS was developed in this study for potentially achieving uniform spray application at all locations along the spray lines. A reservoir subsystem was developed to contain a precisely metered amount of spray liquid. Once filled, compressed air pushed through the spray lines can pressurize the reservoir to help deliver uniform spray into the canopy through emitters. In this study, HSD and PSD systems of 91 m set length were installed in a high-density apple orchard. Both systems were evaluated for variations in operating pressure, spray output, and spray performance. Spray performance was quantified during the middle (BBCH 75) and late (BBCH 85) apple (cv. WA-38 on tall spindle architecture) crop growth stages. Deposition and coverage in three canopy zones and on both sides of leaves were evaluated using Mylar cards and water-sensitive papers (WSP) as samplers, respectively. The Mylar cards and WSP were respectively analyzed using fluorometry and image processing. Statistically similar operating pressure (p > 0.05) was observed for the HSD and PSD systems at 3 m (286.1 and 284.1 kPa, respectively), 33 m (268.4 and 270.5 kPa), 60 m (260.6 and 268.9 kPa), and 87 m (255.3 and 257.9 kPa) from the row inlet. Despite the operating pressure drop, the PSD system had uniform spray output along the 91 m spray line. Compared to the HSD system, about 4%, 3%, 5%, and 20% higher spray output was delivered with the PSD system at 3, 33, 60, and 87 m, respectively, along the spray line. Overall, the PSD system had significantly higher mean spray deposition (p < 0.01) compared to the HSD system during the middle (521 and 382 ng cm-2, respectively) and late (631 and 409 ng cm-2, respectively) growth stages. The PSD system also had numerically higher spray deposition compared to the HSD system for all the canopy zones and on either side of leaf surfaces. Spray coverage trends were similar to deposition; however, the differences were not significant. Overall, the PSD-based SSCDS shows potential for large-scale installation, with additional refinements, for uniform spray applications in high-density apple orchards. Keywords: Hydraulic spray delivery, Pneumatic spray delivery, Solid set canopy delivery system, Spray coverage, Spray deposition.


2021 ◽  
Vol 64 (6) ◽  
pp. 1735-1745
Author(s):  
Rajeev Sinha ◽  
Lav Khot ◽  
Gwen Hoheisel ◽  
Matthew Grieshop

HighlightsVariants of a solid set canopy delivery system were evaluated in a high-density apple orchard.A pair of hollow-cone nozzles installed in three tiers had optimum spray performance for studied crop growth stages.A shower-down arrangement of emitters was the simplest design but had lesser deposition on abaxial leaf surfaces.Abstract. Optimally configured solid set canopy delivery system (SSCDS) based spraying has potential to improve tree-fruit crop pest and disease management by reducing application time and eliminating dependence on ground conditions. In such an effort, this study attempted to optimize SSCDS variants. Four different emitter types (E1 to E4) installed in different mounting configurations (C1 to C4) were evaluated for spray deposition and coverage in a high-density apple orchard trained in tall spindle architecture. Emitters E1, E2, and E4 had full circle spray patterns, and E3 had a hollow-cone pattern. Configuration C1 had a pair of E1 emitters spraying in a vertical plane and installed between two trees at 1.5 m above ground level (AGL). Another E1 emitter spraying in a horizontal plane was mounted atop each tree at 3.3 m AGL. Configurations C2 and C4 had emitters (E2 and E4, respectively) mounted atop each tree at 3.3 m AGL, and C3 had a pair of E3 emitters installed in a three-tier arrangement between two trees in the crop row. During field trials, a tree canopy about 3.0 m tall was divided into three zones (0 to 1.4 m, >1.4 to 2.2 m, and >2.2 to 3.0 m AGL) as bottom, middle, and top canopy zones, respectively. Mylar cards were used to quantify spray deposition using fluorometry, and water-sensitive papers (WSPs) were used to quantify coverage using image processing. Configuration C3 with 80° hollow-cone nozzles in a twin-emitter, three-tier arrangement had the highest overall spray deposition (581.1 ±77.8 ng cm-2, mean ± standard error) and coverage (18.4% ±4.1%). Moreover, C3 also had a significantly higher coverage on the abaxial surfaces of leaves compared to the other configurations. Configurations C1 was non-optimal because it lacked abaxial surface coverage as the canopy grew in the middle and late growth stages. Moreover, significant spray runoff from leaf surfaces was observed visually in the middle zone for C1 during the middle and late stages. This may be attributed to canopy growth around the emitters. Configurations C2 and C4, with emitters in a shower-down arrangement, had the highest deposition and coverage in the top canopy zone compared to the middle and bottom zones. Configurations C2 and C4 also had significantly higher spray coverage on the adaxial surfaces of leaves compared to the abaxial surfaces. Overall, despite the complex design of configuration C3 with six emitters per tree, it may be the most ideal arrangement for agrochemical application in an apple orchard trained in tall spindle architecture. For commercial feasibility, we recommend exploring this three-tier SSCDS configuration with low-cost emitter alternatives. Pertinent continuing efforts have been published by our group in which we successfully modified low-cost irrigation emitters, and the resulting three-tier SSCDS configurations had improved spray performance over expensive hollow-cone nozzles. Keywords: Fixed spray system, High-density apple orchard, Solid set canopy delivery system, Spray coverage, Spray deposition, SSCDS.


2020 ◽  
Vol 59 (04) ◽  
pp. 294-299 ◽  
Author(s):  
Lutz S. Freudenberg ◽  
Ulf Dittmer ◽  
Ken Herrmann

Abstract Introduction Preparations of health systems to accommodate large number of severely ill COVID-19 patients in March/April 2020 has a significant impact on nuclear medicine departments. Materials and Methods A web-based questionnaire was designed to differentiate the impact of the pandemic on inpatient and outpatient nuclear medicine operations and on public versus private health systems, respectively. Questions were addressing the following issues: impact on nuclear medicine diagnostics and therapy, use of recommendations, personal protective equipment, and organizational adaptations. The survey was available for 6 days and closed on April 20, 2020. Results 113 complete responses were recorded. Nearly all participants (97 %) report a decline of nuclear medicine diagnostic procedures. The mean reduction in the last three weeks for PET/CT, scintigraphies of bone, myocardium, lung thyroid, sentinel lymph-node are –14.4 %, –47.2 %, –47.5 %, –40.7 %, –58.4 %, and –25.2 % respectively. Furthermore, 76 % of the participants report a reduction in therapies especially for benign thyroid disease (-41.8 %) and radiosynoviorthesis (–53.8 %) while tumor therapies remained mainly stable. 48 % of the participants report a shortage of personal protective equipment. Conclusions Nuclear medicine services are notably reduced 3 weeks after the SARS-CoV-2 pandemic reached Germany, Austria and Switzerland on a large scale. We must be aware that the current crisis will also have a significant economic impact on the healthcare system. As the survey cannot adapt to daily dynamic changes in priorities, it serves as a first snapshot requiring follow-up studies and comparisons with other countries and regions.


2020 ◽  
Vol 6 (5) ◽  
pp. 1183-1189
Author(s):  
Dr. Tridibesh Tripathy ◽  
Dr. Umakant Prusty ◽  
Dr. Chintamani Nayak ◽  
Dr. Rakesh Dwivedi ◽  
Dr. Mohini Gautam

The current article of Uttar Pradesh (UP) is about the ASHAs who are the daughters-in-law of a family that resides in the same community that they serve as the grassroots health worker since 2005 when the NRHM was introduced in the Empowered Action Group (EAG) states. UP is one such Empowered Action Group (EAG) state. The current study explores the actual responses of Recently Delivered Women (RDW) on their visits during the first month of their recent delivery. From the catchment area of each of the 250 ASHAs, two RDWs were selected who had a child in the age group of 3 to 6 months during the survey. The response profiles of the RDWs on the post- delivery first month visits are dwelled upon to evolve a picture representing the entire state of UP. The relevance of the study assumes significance as detailed data on the modalities of postnatal visits are available but not exclusively for the first month period of their recent delivery. The details of the post-delivery first month period related visits are not available even in large scale surveys like National Family Health Survey 4 done in 2015-16. The current study gives an insight in to these visits with a five-point approach i.e. type of personnel doing the visit, frequency of the visits, visits done in a particular week from among those four weeks separately for the three visits separately. The current study is basically regarding the summary of this Penta approach for the post- delivery one-month period.     The first month period after each delivery deals with 70% of the time of the postnatal period & the entire neonatal period. Therefore, it does impact the Maternal Mortality Rate & Ratio (MMR) & the Neonatal Mortality Rates (NMR) in India and especially in UP through the unsafe Maternal & Neonatal practices in the first month period after delivery. The current MM Rate of UP is 20.1 & MM Ratio is 216 whereas the MM ratio is 122 in India (SRS, 2019). The Sample Registration System (SRS) report also mentions that the Life Time Risk (LTR) of a woman in pregnancy is 0.7% which is the highest in the nation (SRS, 2019). This means it is very risky to give birth in UP in comparison to other regions in the country (SRS, 2019). This risk is at the peak in the first month period after each delivery. Similarly, the current NMR in India is 23 per 1000 livebirths (UNIGME,2018). As NMR data is not available separately for states, the national level data also hold good for the states and that’s how for the state of UP as well. These mortalities are the impact indicators and such indicators can be reduced through long drawn processes that includes effective and timely visits to RDWs especially in the first month period after delivery. This would help in making their post-natal & neonatal stage safe. This is the area of post-delivery first month visit profile detailing that the current article helps in popping out in relation to the recent delivery of the respondents.   A total of four districts of Uttar Pradesh were selected purposively for the study and the data collection was conducted in the villages of the respective districts with the help of a pre-tested structured interview schedule with both close-ended and open-ended questions.  The current article deals with five close ended questions with options, two for the type of personnel & frequency while the other three are for each of the three visits in the first month after the recent delivery of respondents. In addition, in-depth interviews were also conducted amongst the RDWs and a total 500 respondents had participated in the study.   Among the districts related to this article, the results showed that ASHA was the type of personnel who did the majority of visits in all the four districts. On the other hand, 25-40% of RDWs in all the 4 districts replied that they did not receive any visit within the first month of their recent delivery. Regarding frequency, most of the RDWs in all the 4 districts received 1-2 times visits by ASHAs.   Regarding the first visit, it was found that the ASHAs of Barabanki and Gonda visited less percentage of RDWs in the first week after delivery. Similarly, the second visit revealed that about 1.2% RDWs in Banda district could not recall about the visit. Further on the second visit, the RDWs responded that most of them in 3 districts except Gonda district did receive the second postnatal visit in 7-15 days after their recent delivery. Less than half of RDWs in Barabanki district & just more than half of RDWs in Gonda district received the third visit in 15-21 days period after delivery. For the same period, the majority of RDWs in the rest two districts responded that they had been entertained through a home visit.


e-Finanse ◽  
2018 ◽  
Vol 14 (4) ◽  
pp. 67-76
Author(s):  
Piotr Bartkiewicz

AbstractThe article presents the results of the review of the empirical literature regarding the impact of quantitative easing (QE) on emerging markets (EMs). The subject is of interest to policymakers and researchers due to the increasingly larger role of EMs in the world economy and the large-scale capital flows occurring after 2009. The review is conducted in a systematic manner and takes into consideration different methodological choices, samples and measurement issues. The paper puts the summarized results in the context of transmission channels identified in the literature. There are few distinct methodological approaches present in the literature. While there is a consensus regarding the direction of the impact of QE on EMs, its size and durability have not yet been assessed with sufficient precision. In addition, there are clear gaps in the empirical findings, not least related to relative underrepresentation of the CEE region (in particular, Poland).


2020 ◽  
Vol 68 (4) ◽  
pp. 303-314
Author(s):  
Yuna Park ◽  
Hyo-In Koh ◽  
University of Science and Technology, Transpo ◽  
University of Science and Technology, Transpo ◽  
University of Science and Technology, Transpo ◽  
...  

Railway noise is calculated to predict the impact of new or reconstructed railway tracks on nearby residential areas. The results are used to prepare adequate counter- measures, and the calculation results are directly related to the cost of the action plans. The calculated values were used to produce noise maps for each area of inter- est. The Schall 03 2012 is one of the most frequently used methods for the production of noise maps. The latest version was released in 2012 and uses various input para- meters associated with the latest rail vehicles and track systems in Germany. This version has not been sufficiently used in South Korea, and there is a lack of standard guidelines and a precise manual for Korean railway systems. Thus, it is not clear what input parameters will match specific local cases. This study investigates the modeling procedure for Korean railway systems and the differences between calcu- lated railway sound levels and measured values obtained using the Schall 03 2012 model. Depending on the location of sound receivers, the difference between the cal- culated and measured values was within approximately 4 dB for various train types. In the case of high-speed trains, the value was approximately 7 dB. A noise-reducing measure was also modeled. The noise reduction effect of a low-height noise barrier system was predicted and evaluated for operating railway sites within the frame- work of a national research project in Korea. The comparison of calculated and measured values showed differences within 2.5 dB.


2019 ◽  
Vol 20 (2) ◽  
pp. 123-129 ◽  
Author(s):  
Mariana Jesus ◽  
Tânia Silva ◽  
César Cagigal ◽  
Vera Martins ◽  
Carla Silva

Introduction: The field of nutritional psychiatry is a fast-growing one. Although initially, it focused on the effects of vitamins and micronutrients in mental health, in the last decade, its focus also extended to the dietary patterns. The possibility of a dietary cost-effective intervention in the most common mental disorder, depression, cannot be overlooked due to its potential large-scale impact. Method: A classic review of the literature was conducted, and studies published between 2010 and 2018 focusing on the impact of dietary patterns in depression and depressive symptoms were included. Results: We found 10 studies that matched our criteria. Most studies showed an inverse association between healthy dietary patterns, rich in fruits, vegetables, lean meats, nuts and whole grains, and with low intake of processed and sugary foods, and depression and depressive symptoms throughout an array of age groups, although some authors reported statistical significance only in women. While most studies were of cross-sectional design, making it difficult to infer causality, a randomized controlled trial presented similar results. Discussion: he association between dietary patterns and depression is now well-established, although the exact etiological pathways are still unknown. Dietary intervention, with the implementation of healthier dietary patterns, closer to the traditional ones, can play an important role in the prevention and adjunctive therapy of depression and depressive symptoms. Conclusion: More large-scale randomized clinical trials need to be conducted, in order to confirm the association between high-quality dietary patterns and lower risk of depression and depressive symptoms.


Sign in / Sign up

Export Citation Format

Share Document