scholarly journals YerA41, a Yersinia ruckeri Bacteriophage: Determination of a Non-Sequencable DNA Bacteriophage Genome via RNA-Sequencing

Viruses ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 620
Author(s):  
Katarzyna Leskinen ◽  
Maria I. Pajunen ◽  
Miguel Vincente Gomez-Raya Vilanova ◽  
Saija Kiljunen ◽  
Andrew Nelson ◽  
...  
Keyword(s):  
Rna Sequencing ◽  
Transcriptional Control ◽  
De Novo ◽  
Genomic Sequence ◽  
Pcr Amplification ◽  
Yersinia Ruckeri ◽  
Sequencing Data ◽  
Bacterial Gene ◽  
Sequencing Technologies ◽  
Bacterial Gene Expression

YerA41 is a Myoviridae bacteriophage that was originally isolated due its ability to infect Yersinia ruckeri bacteria, the causative agent of enteric redmouth disease of salmonid fish. Several attempts to determine its genomic DNA sequence using traditional and next generation sequencing technologies failed, indicating that the phage genome is modified in such a way that it is an unsuitable template for PCR amplification and for conventional sequencing. To determine the YerA41 genome sequence, we performed RNA-sequencing from phage-infected Y. ruckeri cells at different time points post-infection. The host-genome specific reads were subtracted and de novo assembly was performed on the remaining unaligned reads. This resulted in nine phage-specific scaffolds with a total length of 143 kb that shared only low level and scattered identity to known sequences deposited in DNA databases. Annotation of the sequences revealed 201 predicted genes, most of which found no homologs in the databases. Proteome studies identified altogether 63 phage particle-associated proteins. The RNA-sequencing data were used to characterize the transcriptional control of YerA41 and to investigate its impact on the bacterial gene expression. Overall, our results indicate that RNA-sequencing can be successfully used to obtain the genomic sequence of non-sequencable phages, providing simultaneous information about the phage–host interactions during the process of infection.

scholarly journals CAMISIM: Simulating metagenomes and microbial communities

2018 ◽  
Author(s):  
Adrian Fritz ◽  
Peter Hofmann ◽  
Stephan Majda ◽  
Eik Dahms ◽  
Johannes Dröge ◽  
...  
Keyword(s):  
Microbial Communities ◽  
De Novo ◽  
Real Data ◽  
Small Data ◽  
Data Sets ◽  
Sequencing Data ◽  
Taxonomic Profiling ◽  
Benchmark Data ◽  
Sequencing Technologies ◽  
Wide Range

Shotgun metagenome data sets of microbial communities are highly diverse, not only due to the natural variation of the underlying biological systems, but also due to differences in laboratory protocols, replicate numbers, and sequencing technologies. Accordingly, to effectively assess the performance of metagenomic analysis software, a wide range of benchmark data sets are required. Here, we describe the CAMISIM microbial community and metagenome simulator. The software can model different microbial abundance profiles, multi-sample time series and differential abundance studies, includes real and simulated strain-level diversity, and generates second and third generation sequencing data from taxonomic profiles or de novo. Gold standards are created for sequence assembly, genome binning, taxonomic binning, and taxonomic profiling. CAMSIM generated the benchmark data sets of the first CAMI challenge. For two simulated multi-sample data sets of the human and mouse gut microbiomes we observed high functional congruence to the real data. As further applications, we investigated the effect of varying evolutionary genome divergence, sequencing depth, and read error profiles on two popular metagenome assemblers, MEGAHIT and metaSPAdes, on several thousand small data sets generated with CAMISIM. CAMISIM can simulate a wide variety of microbial communities and metagenome data sets together with truth standards for method evaluation. All data sets and the software are freely available at: https://github.com/CAMI-challenge/CAMISIM

scholarly journals De Novo Sequencing and Hybrid Assembly of the Biofuel Crop Jatropha curcas L.: Identification of Quantitative Trait Loci for Geminivirus Resistance

Genes ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 69 ◽  
Author(s):  
Nagesh Kancharla ◽  
Saakshi Jalali ◽  
J. Narasimham ◽  
Vinod Nair ◽  
Vijay Yepuri ◽  
...  
Keyword(s):  
Ssr Markers ◽  
Genome Assembly ◽  
Jatropha Curcas ◽  
Quantitative Trait ◽  
De Novo ◽  
Mapping Population ◽  
Single Copy ◽  
Sequencing Data ◽  
De Novo Genome Assembly ◽  
Sequencing Technologies

Jatropha curcas is an important perennial, drought tolerant plant that has been identified as a potential biodiesel crop. We report here the hybrid de novo genome assembly of J. curcas generated using Illumina and PacBio sequencing technologies, and identification of quantitative loci for Jatropha Mosaic Virus (JMV) resistance. In this study, we generated scaffolds of 265.7 Mbp in length, which correspond to 84.8% of the gene space, using Benchmarking Universal Single-Copy Orthologs (BUSCO) analysis. Additionally, 96.4% of predicted protein-coding genes were captured in RNA sequencing data, which reconfirms the accuracy of the assembled genome. The genome was utilized to identify 12,103 dinucleotide simple sequence repeat (SSR) markers, which were exploited in genetic diversity analysis to identify genetically distinct lines. A total of 207 polymorphic SSR markers were employed to construct a genetic linkage map for JMV resistance, using an interspecific F2 mapping population involving susceptible J. curcas and resistant Jatropha integerrima as parents. Quantitative trait locus (QTL) analysis led to the identification of three minor QTLs for JMV resistance, and the same has been validated in an alternate F2 mapping population. These validated QTLs were utilized in marker-assisted breeding for JMV resistance. Comparative genomics of oil-producing genes across selected oil producing species revealed 27 conserved genes and 2986 orthologous protein clusters in Jatropha. This reference genome assembly gives an insight into the understanding of the complex genetic structure of Jatropha, and serves as source for the development of agronomically improved virus-resistant and oil-producing lines.

Computational Approaches for Transcriptome Assembly Based on Sequencing Technologies

2020 ◽  
Vol 15 (1) ◽  
pp. 2-16
Author(s):  
Yuwen Luo ◽  
Xingyu Liao ◽  
Fang-Xiang Wu ◽  
Jianxin Wang
Keyword(s):  
De Novo ◽  
Transcriptome Assembly ◽  
Critical Role ◽  
High Sensitivity ◽  
Biological Properties ◽  
Sequencing Data ◽  
Sequencing Technologies ◽  
Long Reads ◽  
Massive Sequencing ◽  
Generation Sequencing

Transcriptome assembly plays a critical role in studying biological properties and examining the expression levels of genomes in specific cells. It is also the basis of many downstream analyses. With the increase of speed and the decrease in cost, massive sequencing data continues to accumulate. A large number of assembly strategies based on different computational methods and experiments have been developed. How to efficiently perform transcriptome assembly with high sensitivity and accuracy becomes a key issue. In this work, the issues with transcriptome assembly are explored based on different sequencing technologies. Specifically, transcriptome assemblies with next-generation sequencing reads are divided into reference-based assemblies and de novo assemblies. The examples of different species are used to illustrate that long reads produced by the third-generation sequencing technologies can cover fulllength transcripts without assemblies. In addition, different transcriptome assemblies using the Hybrid-seq methods and other tools are also summarized. Finally, we discuss the future directions of transcriptome assemblies.

Next generation sequencing allows deeper analysis and understanding of genomes and transcriptomes including aspects to fertility

2011 ◽  
Vol 23 (1) ◽  
pp. 75 ◽  
Author(s):  
Thomas Werner
Keyword(s):  
Next Generation Sequencing ◽  
Transcriptional Control ◽  
Target Genes ◽  
De Novo ◽  
Alternative Promoters ◽  
Next Generation ◽  
Sequencing Data ◽  
Genome Wide ◽  
A Genome ◽  
Generation Sequencing

Reproduction and fertility are controlled by specific events naturally linked to oocytes, testes and early embryonal tissues. A significant part of these events involves gene expression, especially transcriptional control and alternative transcription (alternative promoters and alternative splicing). While methods to analyse such events for carefully predetermined target genes are well established, until recently no methodology existed to extend such analyses into a genome-wide de novo discovery process. With the arrival of next generation sequencing (NGS) it becomes possible to attempt genome-wide discovery in genomic sequences as well as whole transcriptomes at a single nucleotide level. This does not only allow identification of the primary changes (e.g. alternative transcripts) but also helps to elucidate the regulatory context that leads to the induction of transcriptional changes. This review discusses the basics of the new technological and scientific concepts arising from NGS, prominent differences from microarray-based approaches and several aspects of its application to reproduction and fertility research. These concepts will then be illustrated in an application example of NGS sequencing data analysis involving postimplantation endometrium tissue from cows.

scholarly journals The rate and spectrum of mosaic mutations during embryogenesis revealed by RNA sequencing of 49 tissues

2019 ◽  
Author(s):  
Francesc Muyas ◽  
Luis Zapata ◽  
Roderic Guigó ◽  
Stephan Ossowski
Keyword(s):  
Rna Sequencing ◽  
De Novo ◽  
Genetic Disorders ◽  
Adult Life ◽  
Diagnostic Procedures ◽  
Cancer Predisposition ◽  
Sequencing Data ◽  
Individual Study ◽  
Similar Frequency ◽  
Mutational Spectrum

AbstractBackgroundMosaic mutations acquired during early embryogenesis can lead to severe early-onset genetic disorders and cancer predisposition, but are often undetectable in blood samples. The rate and mutational spectrum of embryonic mosaic mutations (EMMs) have only been studied in few tissues and their contribution to genetic disorders is unknown. Therefore, we investigated how frequent mosaic mutations occur during embryogenesis across all germ layers and tissues.ResultsUsing RNA sequencing data from the Genotype-Tissue Expression (GTEx) cohort comprising 49 normal tissues and 570 individuals, we found that new-borns on average harbour 0.5 - 1 EMMs in the exome affecting multiple organs (1.3230 × 10−8 per nucleotide per individual), a similar frequency as reported for germline de novo mutations. Our multi-tissue, multi-individual study design allowed us to distinguish mosaic mutations acquired during different stages of embryogenesis and adult life, as well as to provide insights into the rate and spectrum of mosaic mutations. We observed that EMMs are dominated by a mutational signature associated with spontaneous deamination of methylated cytosines and the number of cell divisions. After birth, cells continue to accumulate somatic mutations, which can lead to the development of cancer. Investigation of the mutational spectrum of the gastrointestinal tract revealed a mutational pattern associated with the food-borne carcinogen aflatoxin, a signature that has so far only been reported in liver cancer.ConclusionIn summary, our multi-tissue, multi-individual study reveals a surprisingly high number of embryonic mosaic mutations in coding regions, implying novel hypotheses and diagnostic procedures for investigating genetic causes of disease and cancer predisposition.

scholarly journals Splatter: simulation of single-cell RNA sequencing data

2017 ◽  
Author(s):  
Luke Zappia ◽  
Belinda Phipson ◽  
Alicia Oshlack
Keyword(s):  
Single Cell ◽  
Rna Sequencing ◽  
Real Data ◽  
Cell Types ◽  
Rna Seq ◽  
Sequencing Data ◽  
Sequencing Technologies ◽  
Simulation Based ◽  
Single Cell Rna Sequencing ◽  
Multiple Cell

AbstractAs single-cell RNA sequencing technologies have rapidly developed, so have analysis methods. Many methods have been tested, developed and validated using simulated datasets. Unfortunately, current simulations are often poorly documented, their similarity to real data is not demonstrated, or reproducible code is not available.Here we present the Splatter Bioconductor package for simple, reproducible and well-documented simulation of single-cell RNA-seq data. Splatter provides an interface to multiple simulation methods including Splat, our own simulation, based on a gamma-Poisson distribution. Splat can simulate single populations of cells, populations with multiple cell types or differentiation paths.

scholarly journals Extensive sequencing of seven human genomes to characterize benchmark reference materials

2015 ◽  
Author(s):  
Justin M Zook ◽  
David Catoe ◽  
Jennifer McDaniel ◽  
Lindsay Vang ◽  
Noah Spies ◽  
...  
Keyword(s):  
Human Genome ◽  
Reference Materials ◽  
De Novo ◽  
Variant Calling ◽  
Genome Project ◽  
Genome Comparison ◽  
Personal Genome ◽  
Sequencing Data ◽  
Sequencing Technologies ◽  
Human Genomes

The Genome in a Bottle Consortium, hosted by the National Institute of Standards and Technology (NIST) is creating reference materials and data for human genome sequencing, as well as methods for genome comparison and benchmarking. Here, we describe a large, diverse set of sequencing data for seven human genomes; five are current or candidate NIST Reference Materials. The pilot genome, NA12878, has been released as NIST RM 8398. We also describe data from two Personal Genome Project trios, one of Ashkenazim Jewish ancestry and one of Chinese ancestry. The data come from 12 technologies: BioNano Genomics, Complete Genomics paired-end and LFR, Ion Proton exome, Oxford Nanopore, Pacific Biosciences, SOLiD, 10X Genomics GemCodeTM WGS, and Illumina exome and WGS paired-end, mate-pair, and synthetic long reads. Cell lines, DNA, and data from these individuals are publicly available. Therefore, we expect these data to be useful for revealing novel information about the human genome and improving sequencing technologies, SNP, indel, and structural variant calling, and de novo assembly.

scholarly journals Detection of pathogenic splicing events from RNA-sequencing data using dasper

2021 ◽  
Author(s):  
David Zhang ◽  
Regina H. Reynolds ◽  
Sonia Garcia-Ruiz ◽  
Emil K Gustavsson ◽  
Sid Sethi ◽  
...  
Keyword(s):  
Rna Sequencing ◽  
Diagnostic Yield ◽  
Genetic Diagnosis ◽  
Fibroblast Cell ◽  
Sequencing Data ◽  
Sequencing Technologies ◽  
Pathogenic Variants ◽  
Splicing Variants ◽  
Gene Filter ◽  
Disease Associations

AbstractAlthough next-generation sequencing technologies have accelerated the discovery of novel gene-to-disease associations, many patients with suspected Mendelian diseases still leave the clinic without a genetic diagnosis. An estimated one third of these patients will have disorders caused by mutations impacting splicing. RNA-sequencing has been shown to be a promising diagnostic tool, however few methods have been developed to integrate RNA-sequencing data into the diagnostic pipeline. Here, we introduce dasper, an R/Bioconductor package that improves upon existing tools for detecting aberrant splicing by using machine learning to incorporate disruptions in exon-exon junction counts as well as coverage. dasper is designed for diagnostics, providing a rank-based report of how aberrant each splicing event looks, as well as including visualization functionality to facilitate interpretation. We validate dasper using 16 patient-derived fibroblast cell lines harbouring pathogenic variants known to impact splicing. We find that dasper is able to detect pathogenic splicing events with greater accuracy than existing LeafCutterMD or z-score approaches. Furthermore, by only applying a broad OMIM gene filter (without any variant-level filters), dasper is able to detect pathogenic splicing events within the top 10 most aberrant identified for each patient. Since using publicly available control data minimises costs associated with incorporating RNA-sequencing into diagnostic pipelines, we also investigate the use of 504 GTEx fibroblast samples as controls. We find that dasper leverages publicly available data effectively, ranking pathogenic splicing events in the top 25. Thus, we believe dasper can increase diagnostic yield for a pathogenic splicing variants and enable the efficient implementation of RNA-sequencing for diagnostics in clinical laboratories.

scholarly journals Comparative assessment of long-read error-correction software applied to RNA-sequencing data

2018 ◽  
Author(s):  
Leandro Lima ◽  
Camille Marchet ◽  
Ségolène Caboche ◽  
Corinne Da Silva ◽  
Benjamin Istace ◽  
...  
Keyword(s):  
Error Correction ◽  
Rna Sequencing ◽  
Gene Families ◽  
Error Rates ◽  
Open Reading Frames ◽  
Sequencing Data ◽  
Sequencing Technologies ◽  
Isoform Diversity ◽  
Long Read ◽  
Read Error Correction

AbstractMotivationLong-read sequencing technologies offer promising alternatives to high-throughput short read sequencing, especially in the context of RNA-sequencing. However these technologies are currently hindered by high error rates in the output data that affect analyses such as the identification of isoforms, exon boundaries, open reading frames, and the creation of gene catalogues. Due to the novelty of such data, computational methods are still actively being developed and options for the error-correction of RNA-sequencing long reads remain limited.ResultsIn this article, we evaluate the extent to which existing long-read DNA error correction methods are capable of correcting cDNA Nanopore reads. We provide an automatic and extensive benchmark tool that not only reports classical error-correction metrics but also the effect of correction on gene families, isoform diversity, bias towards the major isoform, and splice site detection. We find that long read error-correction tools that were originally developed for DNA are also suitable for the correction of RNA-sequencing data, especially in terms of increasing base-pair accuracy. Yet investigators should be warned that the correction process perturbs gene family sizes and isoform diversity. This work provides guidelines on which (or whether) error-correction tools should be used, depending on the application type.Benchmarking softwarehttps://gitlab.com/leoisl/LR_EC_analyser

Sign in / Sign up

Export Citation Format

Share Document