RECOMMENDATIONS FOR THE CHOICE OF MILKING INSTALLATIONS IN LOOSE HOUSING SYSTEMS OF COWS

2020 ◽  
Author(s):  
В.В. ГОРДЕЕВ ◽  
В.Е. ХАЗАНОВ
Keyword(s):  
Dairy Cows ◽  
High Performance ◽  
Large Scale ◽  
Dairy Farms ◽  
Economic Indicators ◽  
Technical Level ◽  
Housing Systems ◽  
Working Shift ◽  
Technical And Economic Indicators

При выборе типа доильной установки и ее размера необходимо учитывать максимальное планируемое поголовье дойных коров и размер технологической группы, кратность и время одного доения, продолжительность рабочей смены дояров. Анализ технико-экономических показателей наиболее распространенных на сегодняшний день типов доильных установок одинакового технического уровня свидетельствует, что наилучшие удельные показатели имеет установка типа «Карусель» (1), а установка типа «Елочка» (2) требует более высоких затрат труда и средств. Установка «Параллель» (3) занимает промежуточное положение. Из анализа пропускной способности и количества необходимых операторов: установка 2 рекомендована для ферм с поголовьем дойного стада до 600 голов, 3 — не более 1200 дойных коров, 1 — более 1200 дойных коров. «Карусель» — наиболее рациональный, высокопроизводительный, легко автоматизируемый и, следовательно, перспективный способ доения в залах, особенно для крупных молочных ферм. The choice of the proper type and size of milking installations needs to take into account the maximum planned number of dairy cows, the size of a technological group, the number of milkings per day, and the duration of one milking and the operator's working shift. The analysis of technical and economic indicators of currently most common types of milking machines of the same technical level revealed that the Carousel installation had the best specific indicators while the Herringbone installation featured higher labour inputs and cash costs. The Parallel installation was found somewhere in between. In terms of the throughput and the required number of operators Herringbone is recommended for farms with up to 600 dairy cows, Parallel — below 1200 dairy cows, Carousel — above 1200 dairy cows. Carousel was found the most practical, high-performance, easily automated and, therefore, promising milking system for milking parlours, especially on the large-scale dairy farms.

scholarly journals Smelting options for carbon ferrochrome based on ore raw materials, middlings and their technological evaluation

2022 ◽  
Vol 320 (1) ◽  
pp. 51-59
Author(s):  
S. Baisanov ◽  
◽  
Ye.Zh. Shabanov ◽  
K.V. Grigorovich ◽  
R.T. Toleukadyr ◽  
...  
Keyword(s):  
Large Scale ◽  
Raw Materials ◽  
Main Idea ◽  
Economic Indicators ◽  
Processing Plant ◽  
Technological Parameters ◽  
Gas Cleaning ◽  
Carbon Ferrochrome ◽  
Technological Evaluation ◽  
Technical And Economic Indicators

The article presents the results of large-scale laboratory tests carried out in the conditions of the Chemical and Metallurgical Institute named after V.I. Zh. Abishev on the use of briquetted mono-charge in the smelting of carbon ferrochrome on a 250 kVA furnace. The purpose of these studies was to determine the technological parameters of the use of briquetted mono-charge containing in its composition chrome ore, wastes from the production of high-carbon ferrochrome, middlings and various carbonaceous reducing agents. The main idea of using these briquettes was to multiply the contact surface of the reductant and ore, which should speed up the technological process. The principal possibility of smelting a standard alloy using briquetted mono-charge is shown. The alloy for individual charge options meets the requirements of the standards. In comparison with the technology without the use of briquettes, the mono-charge technology has shown advantages in all main parameters. The technology with the use of briquettes from the dust of the AktZF gas cleaning system is distinguished by a low yield of non-standard metal and slag, the bulk of the material goes into the gas collection system. Technologies from briquettes from fines pellet production area of Donskoy ore mining and processing plant and flash have very low specific technical and economic indicators and cannot be recommended for industrial use. Improvement of briquetting modes and technology of their smelting is required. The technical and economic indicators were higher than the current one, showed briquettes from ore and coke of the People's Republic of China, briquettes of ore from borlin and shubarkol coals of Kazakhstan.

Incidence of subclinical toxicity in goats and dairy cows consuming leucaena (Leucaena leucocephala) in Thailand

2012 ◽  
Vol 52 (4) ◽  
pp. 283 ◽  
Author(s):  
C. Phaikaew ◽  
W. Suksaran ◽  
J. Ted-arsen ◽  
G. Nakamanee ◽  
A. Saichuer ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Dairy Cows ◽  
Leucaena Leucocephala ◽  
High Performance ◽  
Dairy Farms ◽  
Dietary Component ◽  
The University ◽  
The Impact ◽  
Subclinical Toxicity ◽  
Leucaena Toxicity

A survey of the leucaena toxicity status in four major goat-producing provinces of Thailand where leucaena is fed as the principal dietary component was conducted. Three adjacent dairy farms in one province where leucaena silage was being fed were also sampled. Urine samples were collected from 63 animals on six goat farms and from 32 cows on three dairy farms. Samples were acidified, cleaned and analysed by high performance liquid chromatography for 3,4-DHP and 2,3-DHP concentrations, using a modified procedure developed at the University of Queensland. Total DHP concentrations varied from 375 to 3357 μg/mL on goat farms, and from 142 to 182 μg/mL on dairy farms. These concentrations are indicative of subclinical toxicity that might cause reduced feed intake and productivity. The impact of high DHP on productivity needs to be further studied because leucaena is a readily available source of high-protein forage for ruminant industries in Thailand.

scholarly journals Screening of Selected Indicators of Dairy Cattle Welfare in Macedonia

2015 ◽  
Vol 38 (1) ◽  
pp. 43-51 ◽  
Author(s):  
Miroslav Radeski ◽  
Aleksandar Janevski ◽  
Vlatko Ilieski
Keyword(s):  
Dairy Cows ◽  
Large Scale ◽  
Dairy Farms ◽  
Small Scale ◽  
Practical Implementation ◽  
Assessment Protocol ◽  
Key Points ◽  
Full Protocol ◽  
Alarm Threshold ◽  
Welfare Quality

Abstract The welfare state of cattle in dairy farms in Macedonia has never been assessed previously. The objective of this study was to perform screening analysis of dairy cows welfare and to test the practical implementation of the Welfare Quality® Assessment protocol for cattle in dairy farms in Macedonia. In ten small scale and large scale tie stall farms 23 measures were recorded related to 9 welfare criteria of 4 welfare principles (WP) described in the Welfare Quality® Assessment protocol for dairy cows. The mean percentage of very lean cows was 40.5±9.1%. All assessed farms were not providing access to pasture and an outdoor loafing area. Regarding cleanliness, the presence of dirty udder, upper leg/flank and lower leg was 65.2±9.0%, 85.5±8.0% and 86.5±5.8%, respectively. The overall prevalence of lameness was 5.6±5.0%, and for mild and severe alterations it was 30.8±5.8% and 54.1±4.6%, respectively. The ocular and vulvar discharge, diarrhea, dystocia, percentage of downer cows and mortality rate exceeded the warning and alarm threshold. The avoidance - distance test classified 70.4±6.8% as animals that can be touched or approached closer than 50cm, with overall score of 42.9±3.5. This screening reveals that the most welfare concerns are found in the WP Good Feeding and Good Housing. The on-farm welfare assessment using the full protocol on a representative sample of farms in the country is highly recommended for emphasizing the key points for improving the animal welfare in Macedonian dairy farms.

scholarly journals Influence of the Housing System and the Season on Some Parameters Indicative of the Welfare of Dairy Cows in Eastern Algeria

2021 ◽  
Vol 78 (1) ◽  
pp. 80
Author(s):  
Imene DJAALAB ◽  
Hadria MANSOUR-DJAALAB ◽  
Foulla RIACHI ◽  
Abdel Fattah BEGHRICHE ◽  
Samia HAFFAF ◽  
...  
Keyword(s):  
Dairy Cows ◽  
Milk Production ◽  
Body Condition ◽  
Dairy Farms ◽  
Well Being ◽  
The Other ◽  
Housing System ◽  
Housing Systems ◽  
Eastern Algeria

The purpose of this study is to evaluate the effect of housing systems (free vs. tie-stall) and season (winter vs. spring) on the welfare of dairy cows through indices of cleanliness, leg health (straightness, hocks and knees), lameness score, body condition and milk production. This is to test the hypothesis that dairy cows in spring and free-stalls have a better quality of well-being than those kept in tie stalls in winter. For that, 299 dairy cows of the Holstein and Montbeliard breeds were selected from dairy farms in 6 communes of the Constantine governorate in eastern Algeria. The results showed that tie-stalled farms in winter were characterized by a lack of hygiene (P <0.001), with a stall cleanliness score of 7.62 and a frequency of 32.60% of dirty to very dirty cows. In the spring, the incidence of severe lameness does not exceed 9% in farms with tie stalls and more than 41% in mild lameness in housing with free stalls (P <0.001). Cows in tie stalls show a deviation of legs of 17° to 24° (57.97%). On the other hand, more than half of cows in free stalls show integumentary lesions (alopecia and swelling) of the carpal (60.25%) and tarsal joints (54.22%) (P <0.001). The percentage of fairly lean cows (score 2-2.5), housed in tie stalls, was significantly higher (18 to 44%) with a significantly low milk production (P <0.001). These results reflect a lack of comfort in tie-stall farms during winter which has an impact on dairy performance.

The Structure and Properties of MoSi2 Thin Film in Mos Process

1980 ◽  
Vol 38 ◽  
pp. 326-327
Author(s):  
C.K. Wu ◽  
P. Chang ◽  
N. Godinho
Keyword(s):  
Thin Film ◽  
Integrated Circuits ◽  
High Performance ◽  
Large Scale ◽  
Process Development ◽  
Structure And Properties ◽  
Metal Silicides ◽  
High Oxidation ◽  
Important Approach ◽  
High Oxidation Resistance

Recently, the use of refractory metal silicides as low resistivity, high temperature and high oxidation resistance gate materials in large scale integrated circuits (LSI) has become an important approach in advanced MOS process development (1). This research is a systematic study on the structure and properties of molybdenum silicide thin film and its applicability to high performance LSI fabrication.

Intensification of the process of obtaining basic bases as the basic components of low-curing lubricants

2020 ◽  
Vol 06 ◽  
pp. 48-50
Author(s):  
S.f. Antonov ◽  
◽  
E.F. Kutsevich ◽  
A.I. Matveeva ◽  
R.V. Bartko ◽  
...  
Keyword(s):  
Filtration Rate ◽  
Oil Content ◽  
Economic Indicators ◽  
High Melting ◽  
Polymer Additive ◽  
Modifying Additives ◽  
Base Oils ◽  
Technical And Economic Indicators ◽  
Dewaxing Process

Variants of the intensification of the solvent dewaxing process, which increase the yield of base oils, are described. One of the promising ways to improve the technical and economic indicators of the dewaxing process is the use of modifying additives. The work shows that the introduction of a polymer additive requires a decrease in the filtration rate and, accordingly, an increase in the performance of the dewaxing unit. This results in a petrolatum with a reduced oil content, which is a qualifying factor for the production of high-melting ceresins, protective-wax components, and lubricants for various purposes.

Sign in / Sign up

Export Citation Format

Share Document