scholarly journals Intelligent system of airspace surveillance and security in the real time

2018 ◽  
Vol 2018 (9) ◽  
pp. 1-7
Author(s):  
Anita Linka ◽  
Agnieszka Wróblewska

New technologies are more and more often used to increase the level of securing humans work as well as many processes from various areas of industry or transport. Intelligent systems not only support work while optimizing it, but also minimize the risk of dangerous situations for human life. It is the man who is still considered the weakest link in most processes, and it is the human factor that causes many accidents and disasters. Therefore, its activities should be controlled at every stage of the task being performed. This publication describes the use of intelligent technology in the process of training pilots and performing aerobatics.

2014 ◽  
Vol 641-642 ◽  
pp. 1168-1171
Author(s):  
Ling Long ◽  
Ya Dong Shao ◽  
Hai Shang Liu

In order to accurately obtain the real-time environment information, this paper introduces a solar energy environmental monitoring intelligent system, and gives the corresponding design of hardware and software flow. The system adopts solar energy to supply power, uses ARM as the core microprocessor, and acquires environment information by multiple sensors, so that system terminal displays the real-time monitoring information. This design not only enhances Security for people's work, life and travel, but also makes full use of solar energy to achieve a modern green life.


2019 ◽  
Vol 8 (4) ◽  
pp. 1874-1878

Supervisory control and data acquisition (SCADA) is one of the existing phase measurement system provides the real-time control of power switching relays, attains information of the system status. Usually it accomplishes three-phase measurement in distributed network of smart grid through ample power quality measurement of voltage, current, and mostly the total harmonic distortion. However, the investigation of the paper suggests that SCADA delivers the updates of the grid information in times with the communication delays of 15 seconds. Of course, these timing delays can be higher, since it varies on the system complexity. Therefore, this communication delays too high in terms of synchronization, fault monitoring, and the measurement of the system variables in real-time. Therefore, this study covers the communication framework and its protocols of the smart grid application. To make the study more concise, this paper also assessed the delay of IEEE 1588 and IEEE C37.118 for the synchronization performance measurement. Moreover, this paper also includes the performance analysis of the existing the intelligent system and its protocols for smart grid application.


2014 ◽  
Vol 926-930 ◽  
pp. 2143-2146
Author(s):  
Xiu Wei Fu ◽  
Li Fu ◽  
Jing Li

Human life and work are affected by PM2.5, so it is very necessary to get the real-time detection of PM2.5 every day. Remote monitoring is achieved by the LM3S8962 with Ethernet module as control core, and then the detect signals about PM2.5 air quality are transmitted by Ethernet communications. It has been proved by our experiment that Air quality testing data can be obtained in real time by experiments. It can be conclusion that the data of experimental is right by comparing.


2021 ◽  
Vol 11 (4) ◽  
pp. 1920
Author(s):  
Jong-Gyu Shin ◽  
Ga-Young Choi ◽  
Han-Jeong Hwang ◽  
Sang-Ho Kim

With the development of artificial intelligence technology, voice-based intelligent systems (VISs), such as AI speakers and virtual assistants, are intervening in human life. VISs are emerging in a new way, called human–AI interaction, which is different from existing human–computer interaction. Using the Kansei engineering approach, we propose a method to evaluate user satisfaction during interaction between a VIS and a user-centered intelligent system. As a user satisfaction evaluation method, a VIS comprising four types of design parameters was developed. A total of 23 subjects were considered for interaction with the VIS, and user satisfaction was measured using Kansei words (KWs). The questionnaire scores collected through KWs were analyzed using exploratory factor analysis. ANOVA was used to analyze differences in emotion. On the “pleasurability” and “reliability” axes, it was confirmed that among the four design parameters, “sentence structure of the answer” and “number of trials to get the right answer for a question” affect the emotional satisfaction of users. Four satisfaction groups were derived according to the level of the design parameters. This study can be used as a reference for conducting an integrated emotional satisfaction assessment using emotional metrics such as biosignals and facial expressions.


Author(s):  
Bhargava R ◽  
Amulya H C ◽  
Jyothi K P ◽  
Keerthana R

As human life started to evolve on this earth, the craving for smart automobiles has increased, and adding a vehicle security system to secure the automobile from theft in parking and in unsecured places is important. This paper proposes the design and development of smart system to prevent theft that uses biometric authentication to access the door and to start the engine of the automobile. This system initially uses the fingerprint module that takes the real time fingerprint of a person trying to open the vehicle door and compares it with the authorized person’s fingerprint and then allows or denies the access to door, and secondly the camera takes the image of a person trying to start the engine and compares with the authorized person’s image to allow or deny the access to the engine. In case of detection of unauthorized fingerprint, the GSM module sends the message to the owner and in case unauthorized person detected by camera it sends the captured image with alert message to owner. The system is developed using raspberry pi, GSM module, fingerprint module, pi camera, dc and servo motor.


The Surveillance and the ongoing examination on Fire work mishaps are just arrangements with the manual preventions, mindfulness and how to keep away from the mishaps during the assembling procedure of wellbeing matches and fireworks. Dangerous mishaps happen frequently, resulting in overwhelming misfortunes of human lives and wounds to laborers. The fundamental driver of Fire mishaps is from Gun Powder. In this Gunpowder not just explosives at the time of higher temperature which additionally obliterated the whole things underneath the referenced temperature. The preventive measure on this surveillance bargains and suggested that the temperature, smoke caution sensor is bolstered to the laborers keep away from heavier harms. The proposed work enhances the preventive system through, advanced IoT based sensors which is deployed on the field to monitor and prevent the real time mishaps. The framework clearly identifies the Automated Chemical Manager (ACM) to balance chemical control activities and threshold limits to avoid the possibility of accidents in the firework industries. The timely alarm through this smart preventive system will avoid the loss of human life and frequent accidents in the firework industry.


1998 ◽  
Vol 16 (4) ◽  
pp. 483-504 ◽  
Author(s):  
Stephen Graham

In this paper I analyse some emerging socioeconomic applications of information and communications technologies and explore how they support technological systems which increasingly blend surveillance with simulation. In the first part of the paper I explore the technological shifts supporting blended ‘surveillant simulation’ and review how the emerging links between surveillance, simulation, and material geographies have been addressed in recent debates on society, space, and cultural change. In the second part I go on to explore four examples in detail where widespread electronic surveillance systems are providing the captured data and images to produce electronic simulations of the ‘real world’ in near ‘real time’—virtual banking, retailing and ‘reality’, crime control and electronic tagging, road transport telematics, and ‘smart’ utility systems. Attention is focused on how such simulations of the real world are then used to support new spatial practices based on the fine-grained allocation of goods and services, and intimate patterns of attempted social control, in real time, through the time–space fabric of material geographies. I conclude by analysing the implications of surveillant simulation for theories of technology, space, and place, for social polarisation in cities, and for considering opportunities for resisting the spatial practices of dominant organisations.


2012 ◽  
Vol 263-266 ◽  
pp. 2619-2622
Author(s):  
Jianpin Han ◽  
Bo Ting Geng ◽  
Tian Tan

Human body detection of intelligent system is an important and crucial issue, and this work has been studied for many years. Luciano Spinello achieved the real-time detection performance of human body based on Kinect with the help of GPU to accelerate to computation of features .But when its algorithm is realized in CPU, it can’t still achieve the real-time detection performance. This paper put forword a improvement measure to accelerate the computation of features. Features can be rapidly calculated by integral images, which was proposed by Qiang Zhu to detect object rapidly in 2001, abandoning the previous procession of using three line interpolation and Gauss filter, the improved algorithm, in CPU 3.10Ghz, RAM 2.85GB, 640*480 detection window, can achieve the average detection rate of 40 FPS. Performance gets promotion greatly.


2013 ◽  
Vol 748 ◽  
pp. 675-678 ◽  
Author(s):  
Peng Wu ◽  
Ning Jun Ruan ◽  
Kai Xie

Actually as a question of pattern recognition, the research of cash recognition mainly focuses on three aspects: data acquisition, feature extraction and classifier design. In order to finish the real time recognition of Chinese cash, a fuzzy recognition intelligent system is presented in this paper. We use this arithmetic in the processing of information of cash and the recognition of the cash. Experiments has proved that this method can auto organize and auto study, and meet the need of complex system for the networks no linearity and high collateral.


2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Aamir Shahzad ◽  
Yang Sun Lee ◽  
Malrey Lee ◽  
Young-Gab Kim ◽  
Naixue Xiong

Telemonitoring is not a new term, in information technology (IT), which has been employed to remotely monitor the health of patients that are located not in common places, such hospitals or medical centers. For that, wearable medical sensors, such as electrocardiography sensors, blood pressure sensors, and glucometer, have commonly been used to make possible to acquire the real-time information from the remotely located patients; therefore, the medical information is further carried, via the Internet, to perform medical diagnosis and the corresponding treatments. Like in other IT sectors, there has been tremendous progress accounted in medical sectors (and in telemonitoring systems) that changes the human life protection against several chronic diseases, and the patient’s medical information can be accessed wirelessly via Wi-Fi and cellular systems. Further, with the advents of cloud computing technology, medical systems are now more efficient and scalable in processing, such as storage and access, the medical information with minimal development costs. This study is also a piece of enhancement made to track and monitor the real-time medical information, bounded in authorized area, through the modeling of private cloud computing. The private cloud-based environment is designed, for patient health monitoring called bounded telemonitoring system, to acquire the real-time medical information of patients that resided in the boundary, inside medical wards and outside medical wards, of the medical center. A new wireless sensor network scenario is designed and modeled to keep or monitor the patients’ health information whole day, 24 hours. This research is a new secured sight towards medical information access and gives directions for future developments in the medical systems.


Sign in / Sign up

Export Citation Format

Share Document