STRATEGI PENERAPAN MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA OLEH PLN (PERSERO) UNIT INDUK P3B SUMATERA DI KOTA PEKANBARU

2021 ◽  
Vol 4 (4) ◽  
Author(s):  
Noni Valen Kristiani ◽  
Abdul Sadad
Keyword(s):  
Government Regulation ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Secondary Data ◽  
Occupational Safety And Health ◽  
Primary Data ◽  
Safety And Health ◽  
Descriptive Approach

The purpose of this study was to determine the Strategy for the Implementation of Occupational Health and Safety Management (K3) implemented by the company to minimize or reduce the number of accidents and occupational diseases. This type of research is a qualitative research using a descriptive approach and the data needed are primary data and secondary data derived from observations, interviews and documentation analyzed by researchers so as to obtain accurate and clear data regarding the strategy for implementing K3 Management by PLN (Persero) UIP3B Sumatra in Pekanbaru City. The results of this study indicate that the Strategy for Implementation of Occupational Safety and Health (K3) Management by PLN (Persero) UIP3B Sumatra in Pekanbaru City However, the implementation of occupational safety and health management carried out by PLN (Persero) UIP3B Sumatra has not achieved the expected goals, this happens because there are still inhibiting factors, namely low employee competence, lack of awareness from employees of the importance of K3 and lack of K3 supervision with reference to Government Regulation Number 50 of 2012.

scholarly journals Tinjauan Penerapan SMK3 Berdasarkan Peraturan Pemerintah Nomor 50

2021 ◽  
Vol 1 (01) ◽  
pp. 1-6
Author(s):  
Severinus Ama Kolot
Keyword(s):  
Management System ◽  
Government Regulation ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Monitoring And Evaluation ◽  
Occupational Safety And Health ◽  
Safety And Health ◽  
Five Elements

Introduction: Based on Government Regulation No. 50 of 2012, companies with more than 100 workers and have a high potential for hazards are required to implement an Occupational Safety and Health Management System (SMK3). The purpose of this study is to review the implementation of the occupational safety and health management system based on Government Regulation Number 50 of 2012 at PT Totalindo Eka Persada, the Kingland Avenue Serpong Project in 2020. Methods: This research is descriptive using a qualitative approach. The informants of this study used 2 key informants, namely the HSE Manager and construction K3 experts.Research data information is obtained from interviews, documents, and observations. Results: Based on Government Regulation Number 50 of 2012 obtained a suitability of 86.5%. The level of achievement in detail is, monitoring and evaluation of K3 performance at 75%, implementation of the K3 plan 78%, determining K3 policy 100%, and planning K3 100%. Discussion: Total value of the five elements of Government Regulation Number 50 of 2012 in the kingland avenue project of PT. Totalindo Eka Persada in 2020 is 86.5% so that the implementation of the Occupational Health and Safety Management System (SMK3) is classified as satisfactory based on the provisions required by Government Regulation Number 50 of 2012.

scholarly journals PENERAPAN SISTEM MANAJEMEN KESEHATAN DAN KESELAMATAN KERJA PADA PABRIK PAKAN TERNAK DI KOTA MEDAN

2018 ◽  
Vol 19 (2) ◽  
pp. 58-64
Author(s):  
Yuana Delvika
Keyword(s):  
Management System ◽  
Government Regulation ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Animal Feed ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Safety Management System ◽  
Safety And Health

The increasingly globalized changes in the modern economy have grown rapidly in all areas of life such as industry, services, property, mining, transportation and others. But behind the progress there is a price to be paid by the people of Indonesia is the negative impact caused one of them is a disaster such as accidents, pollution and occupational diseases that resulted in thousands of people injured every year. This condition is caused by the lack of concern about safety and health (K3) in the community. Health and Safety Management System (SMK3) is regulated in Government Regulation No. 50 of 2012 on Guidelines for Implementation of Occupational Safety and Health Management System. HSE Management System is part of the overall corporate management system required for the development, implementation, achievement, assessment and maintenance of OSH obligations, in the context of risk control related to work activities for the creation of safe, efficient and productive workplaces.This research was conducted at a company that produce animal feed in Medan City. The company is building a health and safety management system in the company.The result of research on the implementation of Occupational Safety and Health Management in animal feed companies that the implementation of SMK3 in the company has followed the clauses required in PP No.50 of 2012. This is shown by the small gap between Government Regulation No.50 of 2012 with the application in company.

scholarly journals Evaluation of the Application of Health and Safety Management System (SMK3) in the Mining Company of PTX. Based on Government Regulation Number 50 of 2012

2020 ◽  
Vol 8 (T2) ◽  
pp. 183-187
Author(s):  
Suhartina Suhartina ◽  
Lalu M. Saleh ◽  
Syaifuddin Sirajuddin ◽  
Sumbangan Baja ◽  
Anwar Mallongi
Keyword(s):  
Management System ◽  
Government Regulation ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Management Systems ◽  
Input Stage ◽  
Safety And Health

BACKGROUND: Occupational safety and health management systems, hereinafter, in SMK3 are part of the overall company management system in the context of risk control related to work activities to create a safe, efficient, and productive workplace through efforts to prevent accidents and occupational diseases. AIM: This study aimed to evaluating the application of occupational safety and health management systems to contractors in the management area of PT Sims Jaya Kaltim based on government regulation number 50 of 2012. METHODS: The application of SMK3 is mandatory for companies with 100 employees or high risk. The evaluation research using the culinary method adopted a countenance stake evaluation model with three stages, starting with the antecedents, Transaction, and outcomes stages, in three mining companies. Data collection uses source pole, interviews, document review, and observation. RESULTS: The results of this study indicate the results of evaluating the implementation of an occupational safety and health management system at the Attendance (Input) stage in PT X based on government regulation number 50 of 2012, included in the less category where the value obtained is 55%. The results of the evaluation of the application of an occupational health and safety management system at the stage of transaction in X based on government regulation number 50 of 2012 are included in the satisfying category where the value obtained is 86%, while the outcomes obtained a value of 70.5% in the less category. PT Mandiri Herindo Adiperkasa and PT Iwaco Jaya Abadi are expected to further enhance the application of occupational safety and health management systems. CONCLUSION: The results of the evaluation of the implementation of the occupational safety and health management system (SMK3) at the Attendance (Input) stage at PT X based on government regulation number 50 of 2012 are included in the category of lacking where the value obtained is 55%. Transaction phase (Process) is included in the satisfactory category where the value gained 86%. The outcomes phase is obtained 70.5%.

scholarly journals Analysis of Knowledge, Implementation and Monitoring of K3 on Occupational Health and Safety Management System (SMK3) at Pt. Mujur Lestari Labuhan Batu Selatan

2021 ◽  
Vol 8 (12) ◽  
pp. 404-410
Author(s):  
Hotbona Novandi Tambunan ◽  
Nazaruddin . ◽  
Isfenti Sadalia
Keyword(s):  
Occupational Health ◽  
Management System ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Occupational Safety And Health ◽  
Safety Management System ◽  
Safety And Health

Occupational Health and Safety (K3) is aimed as an effort to create a workplace that is safe, healthy, free from environmental pollution, so that it can reduce and or be free from work accidents and occupational diseases and can have an impact on increasing work efficiency and productivity. The need for implementation and Monitoring of the Occupational Health and Safety Management System at PT. Mujur Lestari must have a good corporate culture and be able to contribute to SMK3. For that PT. Mujur Lestari makes implementation and Monitoring to minimize the risk of work accidents for employees. The sample used in this study were employees of PT. Mujur Lestari, totaling 81 people. The data collection method used a questionnaire while the analytical method used was multivariate analysis. The results showed that there was an influence between knowledge on the Occupational Health and Safety Management System (SMK3) at PT. Mujur Lestari with a tcount greater than ttable, the effect of applying the Occupational Health and Safety Management System (SMK3) with a tcount greater than ttable, the effect of Monitoring on the Occupational Health and Safety Management System (SMK3) with a greater tcount from ttable and there is no relationship between the implementation and Monitoring of the Occupational Safety and Health Management System (SMK3). The conclusion shows that the knowledge variable has a positive and significant effect on the Occupational Safety and Health Management System (SMK3), the application variable has a positive and significant impact on the Occupational Safety and Health Management System (SMK3) and the Monitoring variable has a positive and significant effect on the Occupational Safety and Health Management System. (SMK3). Keywords: Occupational Health and Safety (K3), Occupational Health and Safety Management System (SMK3).

scholarly journals Penerapan Keselamatan dan Kesehatan Kerja pada Aktivitas Wisata Berenang Bersama Ikan Hiu (Swim with Shark) di Pulau Serangan, Denpasar Selatan

2018 ◽  
Vol 5 (2) ◽  
pp. 262
Author(s):  
Julius Simon ◽  
Made Sukana
Keyword(s):  
Occupational Safety ◽  
Health And Safety ◽  
Secondary Data ◽  
Occupational Safety And Health ◽  
Primary Data ◽  
Library Research ◽  
Safety And Health ◽  
Tourism Activity ◽  
Great Possibility ◽  
The Impact

Selection of research is motivated by the increased interest of tourists will kind of attraction travel in Bali. In this kind of travel these attraction are extreme types of tourist activity in Pulau Serangan is, Swim with Sharks. Of course, by choosing the type of extreme travel to swim with the sharks, the great possibility of the risk of accidents caused. Hence the importance of this research study releated to health and safetyof employees and tourist who do this activity in Pulau Serangan. The data used in this research is qualitative data, while the data source in the form of primary data and secondary data. Data was collected through observation, interviews, and library research. And assisted with the descriptive data analysis techniques. In applying the safety and health at tourism activities swim with sharks, this report uses occupational safety and health procedures that apply to employees and tourist who do that tourism activity. Besides, the factors triggering the accident, or the result of the impact and the prevention and mitigation to be part of the discussion of this report. The results showed that the application of occupational safety and health on travel activity swim with sharks being the foremost, so most have applied, only need the addition of some other procedure for the safety of travelers.   Keywords: Attraction Tourism, Swim With Shark, Occupational health and safety

scholarly journals Occupational Safety and Health Management Systems and Their Compliance among Petrol Stations in Kenya: A Case Study in Nakuru County

2019 ◽  
pp. 1-8
Author(s):  
J. K. Mutungi ◽  
W. Moturi ◽  
S. Makindi
Keyword(s):  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Management Systems ◽  
Special Focus ◽  
Purposive Sampling ◽  
Section Data ◽  
Safety And Health

Companies have a legal and social responsibility to ensure the safety of its workers, all persons lawfully present at the workplace and the surrounding community. This requires laid down procedures and routing process which aims at identifying, eliminating, minimizing and control the work-related hazards and decrease the risks. To be effective, the Occupational Safety and Health Management Systems (OSHMS) need to be integrated within the organization’s safety policy and objectives. Therefore, this explains why OSHMS has continued to play a pivotal role in the decision making process in most companies. This study aimed at assessing occupational health and safety management systems in place and their compliance. The sampling unit was petrol stations and the study employed use descriptive study design. The purposive sampling was employed to select thirty two (32) petrol stations in Njoro Molo and Nakuru Municipalities of Nakuru County with a special focus on petrol stations which have dispenser pumps, car servicing bay and Front Office section. Data was collected using purposive sampling, stratified and simple random where interviews, observations and questionnaire survey. Descriptive statistics which involved frequency tables and percentages was used to analyze the data. The findings of this study shows that more than half of the petrol stations lacked defined Occupational Safety and Management systems. There is need of Occupational Safety and Health Management System to be integrated within petrol stations policy in order to reduce the operations mistakes, costs of reducing problems and level of risks while ensuring that they comply with laws and regulations.

scholarly journals Analysis of OHS Costs in the Road Construction Project of Singaraja City – Mengwi (Short Cut Bedugul Point 5 - 6)

2021 ◽  
Vol 21 (2) ◽  
pp. 97-100
Author(s):  
I Ketut Sutapa ◽  
◽  
I Nyoman Sutapa ◽  
I Wayan Darya Suparta ◽  
I Nyoman Ramia ◽  
...  
Keyword(s):  
Management System ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Construction Project ◽  
Work Productivity ◽  
Health And Safety ◽  
Road Construction ◽  
Occupational Safety And Health ◽  
Safety And Health

Short Cut Bedugul is a short road construction project on the Singaraja-Denpasar route. The short cut development includes the implementation of an occupational health and safety management system (SMK3). The 5-6 point short cut project includes the grade of a large project and places great importance on work safety. Field conditions with high rainfall make the area prone to landslides that can endanger workers, as well as environmental temperatures that reach 20oC which can affect work productivity. The objectives of this study are: To analyze the implementation of occupational safety and health (K3) on the Short Cut project point 5-6 Bedugul. To find out the amount of costs incurred in implementing K3 on the Short Cut point 5-6 Bedugul project. To analyze the percentage of safety and health costs (K3) to the short cut project value point 5-6 Bedugul. The type of research used in this research is descriptive research. and a quantitative descriptive of the construction of the Singaraja City Boundary Road - Mengwi (Short Cut Bedugul point 5–6) the use of K3 such as the use of safety helmets, light vests, masks, gloves, and safety belts is in accordance with the law and is very disciplined and obedient to existing regulations. set. The percentage of K3 costs to the project value refers to the CIRCULAR OF THE MINISTER NO. 66 / SE / M / 2015 Regarding the Cost of Implementing an Occupational Safety and Health Management System (SMK3) Construction in the Public Works Sector is 0.7%.

scholarly journals PENGARUH PELAKSANAAN PROGRAM PELATIHAN DAN PENERAPAN SISTEM MANAJEMEN K3 TERHADAP PRODUKTIVITAS KERJA ANGGOTA PADA DINAS PEMADAM KEBAKARAN KOTA BEKASI

2021 ◽  
Vol 16 (2) ◽  
pp. 53-60
Author(s):  
Meta Luvita Sari ◽  
Rycha Kuwara Sari
Keyword(s):  
Training Program ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Work Productivity ◽  
Health And Safety ◽  
Fire Department ◽  
Occupational Safety And Health ◽  
Management Systems ◽  
Safety And Health

This research was conducted to determine whether there is an effect of the implementation of training programs and the application of occupational safety and health management systems on the work productivity of members of the Bekasi city fire department. Based on the results of the research on the Implementation of the Training Program and the Implementation of Occupational Health and Safety Management Systems (K3) on the Work Productivity of Employees at the Bekasi City Fire Department, there is an effect either partially or simultaneously. The conclusion of this study is that the Implementation of the Training Program and Implementation of the Occupational Safety and Health Management System (K3) explains the effect on the Work Productivity of Members at the Bekasi City FireService by 53.8%, while the rest is influenced by other independent variables that are not researched.

scholarly journals An Occupational Safety And Health Management System To Minimize Work Accidents

2020 ◽  
Vol 17 (2) ◽  
pp. 162-166
Author(s):  
Indrayani Indrayani ◽  
Djoko Dwi Kusumojanto
Keyword(s):  
Qualitative Research ◽  
Occupational Safety ◽  
Safety Management ◽  
Health Management ◽  
Health And Safety ◽  
Occupational Safety And Health ◽  
Industrial Activities ◽  
Descriptive Research ◽  
Safety And Health ◽  
Work Accidents

Industrial activities are planning and controlling well through the implementation of occupational safety and Health management The purpose of this research is to know the implementation of occupational health and safety management in order to minimize work accidents. This research is done by qualitative research methods with a type of descriptive research. The results showed the planning and implementation of occupational safety and health management that has been well implemented so as to minimize work accidents.

scholarly journals Evaluation of The Implementation of Occupational Health and Safety Programs in Logistics Companies in Pekanbaru

2021 ◽  
Vol 1 (1) ◽  
pp. 531-546
Author(s):  
Endang Purnawati Rahayu ◽  
Herniwanti Herniwanti
Keyword(s):  
Occupational Health ◽  
Occupational Safety ◽  
Health And Safety ◽  
Secondary Data ◽  
Occupational Safety And Health ◽  
Health Programs ◽  
Primary Data ◽  
Hazard Control ◽  
Safety And Health ◽  
Loading And Unloading

Implementation of occupational safety and health programs to guarantee safety and health for workers spiritually and physically while doing work. In every activity or activity, accidents may occur that claim lives and property, one of which is loading and unloading activities which have risks in each activity process. This study aims to evaluate the implementation of occupational safety and health programs in loading and unloading companies. This research is a qualitative descriptive study. The design of this research is survey research. Primary data were obtained through interviews and observations, while secondary data were obtained from company documents. The results showed that the implementation of the occupational safety and health program in this loading and unloading company was still lacking and did not comply with the applicable standards, namely human resources that did not meet standards, standard operating procedures that lacked socialization and supervision to workers, there was no safety training program and occupational health is following the type of work, the use and provision of personal protective equipment are still lacking and hazard control has been carried out, but it is necessary to carry out supervision when loading and unloading work is carried out.

Sign in / Sign up

Export Citation Format

Share Document