scholarly journals Simulation of Dye Synthesized Solar Cell using Artificial Neural Network

2019 ◽  
Vol 9 (2) ◽  
pp. 1316-1322
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Solar Cell ◽  
Transfer Function ◽  
Short Circuit ◽  
Ann Model ◽  
Minimum Mean Squared Error ◽  
Marquardt Algorithm ◽  
Artificial Neural ◽  
The Impact

The primary goal of present examination is to foresee every day worldwide solar cell efficiency in view of meteorological factors, utilizing distinctive counterfeit neural system (ANN) procedures. In the present examination we report the impact of Dye Synthesized solar cell. A three-layer artificial neural network (ANN) model was developed to predict the efficiency of Dye Synthesized solar cell based on 100 experimental sets. In the present examination we report the impact of Dye Synthesized solar cell. The effect of operational parameters such as short circuit current (Jsc),Open circuit voltage(Voc),Fill factor(FF) were studied to optimize the conditions to check the efficiency of Dye Synthesized solar cell. Experimental results showed that the ANN model was able to predict adsorption efficiency with a tangent sigmoid transfer function (tansig) at hidden layer with 20 neurons and a linear transfer function (purelin) at output layer. The Levenberg–Marquardt algorithm (LMA) was used with a minimum mean squared error (MSE) of 0.00350141. The linear regression between the network outputs and the corresponding targets were proven to be satisfactory with a correlation coefficient of about 0.9993 for six model variables used in this study

scholarly journals Artificial neural network, predictor variables and sensitivity threshold for DNA methylation-based age prediction using blood samples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhonghui Thong ◽  
Jolena Ying Ying Tan ◽  
Eileen Shuzhen Loo ◽  
Yu Wei Phua ◽  
Xavier Liang Shun Chan ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Regression Model ◽  
Sensitivity Threshold ◽  
Ann Model ◽  
Blood Samples ◽  
Ann Models ◽  
Artificial Neural ◽  
The Impact ◽  
Age Prediction

AbstractRegression models are often used to predict age of an individual based on methylation patterns. Artificial neural network (ANN) however was recently shown to be more accurate for age prediction. Additionally, the impact of ethnicity and sex on our previous regression model have not been studied. Furthermore, there is currently no age prediction study investigating the lower limit of input DNA at the bisulfite treatment stage prior to pyrosequencing. Herein, we evaluated both regression and ANN models, and the impact of ethnicity and sex on age prediction for 333 local blood samples using three loci on the pyrosequencing platform. Subsequently, we trained a one locus-based ANN model to reduce the amount of DNA used. We demonstrated that the ANN model has a higher accuracy of age prediction than the regression model. Additionally, we showed that ethnicity did not affect age prediction among local Chinese, Malays and Indians. Although the predicted age of males were marginally overestimated, sex did not impact the accuracy of age prediction. Lastly, we present a one locus, dual CpG model using 25 ng of input DNA that is sufficient for forensic age prediction. In conclusion, the two ANN models validated would be useful for age prediction to provide forensic intelligence leads.

Simultaneous Quantitative Analysis of Clorsulon and Ivermectin in a Veterinary Formulation by Artificial Neural Network

2008 ◽  
Vol 59 (10) ◽  
Author(s):  
Gozde Pektas ◽  
Erdal Dinc ◽  
Dumitru Baleanu
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Transfer Function ◽  
Back Propagation ◽  
Ann Model ◽  
Back Propagation Algorithm ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Hidden Layer

Simultaneaous spectrophotometric determination of clorsulon (CLO) and invermectin (IVE) in commercial veterinary formulation was performed by using the artificial neural network (ANN) based on the back propagation algorithm. In order to find the optimal ANN model various topogical networks were tested by using different hidden layers. A logsig input layer, a hidden layer of neurons using the logsig transfer function and an output layer of two neurons with purelin transfer function was found suitable for basic configuration for ANN model. A calibration set consisting of CLO and IVE in calibration set was prepared in the concentration range of 1-23 �g/mL and 1-14 �g/mL, repectively. This calibration set contains 36 different synthetic mixtures. A prediction set was prepared in order to evaluate the recovery of the investigated approach ANN chemometric calibration was applied to the simultaneous analysis of CLO and IVE in compounds in a commercial veterinary formulation. The experimental results indicate that the proposed method is appropriate for the routine quality control of the above mentioned active compounds.

Estimation of Moisture Ratio of a Mushroom Undergoing Microwave-vacuum Drying Using Artificial Neural Network and Regression Models

2007 ◽  
Vol 2 (3) ◽  
Author(s):  
Poonpat Poonnoy ◽  
Ampawan Tansakul ◽  
Manjeet Chinnan
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Moisture Ratio ◽  
Vacuum Pressure ◽  
Ann Model ◽  
Drying Time ◽  
Feed Forward ◽  
Marquardt Algorithm ◽  
Ann Models ◽  
Artificial Neural

The drying rate of a mushroom undergoing microwave-vacuum (MV) drying (MVD) was controlled by moisture dissipation and was dependent on vacuum pressure levels. The main objective of this work was to develop artificial neural network (ANN) model to predict moisture ratio of MV-dried mushrooms. One-hidden-layer feed-forward ANN models were trained and validated with experimental data. The Levenberg-Marquardt algorithm was utilized in regulating the ANN model weights and biases. Inputs for ANN models were vacuum pressure and drying time. Output from ANN models was moisture ratio at a given drying time. Reduced chi-square (X 2) and root mean square error (RMSE), and residual sum of squares (RSS) of the results from ANN models were calculated and compared with those of a modified Page's model (an experimental-based mathematical model), which is commonly used in the literature. The X 2, RMSE, and RSS of the ANN model (2.272 x 10 -5, 4.023 x 10 -3, and 3.204 x 10 -3, respectively) were found to be lower than those of the modified Page's model (6.692 x 10 -4, 2.561 x 10 -2, and 12.98 x 10 -2, respectively). These results indicate that the feed-forward ANN model represented the drying characteristics of mushrooms better than the modified Page's model. Therefore, the ANN model could be considered as a better tool for estimation of the moisture content of mushrooms than by the modified Page's model.

scholarly journals An Artificial Neural Network Model for Highway Accident Prediction: A Case Study of Erzurum, Turkey

2015 ◽  
Vol 27 (3) ◽  
pp. 217-225 ◽  
Author(s):  
Muhammed Yasin Çodur ◽  
Ahmet Tortum
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Mean Square Error ◽  
Traffic Accidents ◽  
Model Parameters ◽  
Mean Square ◽  
Ann Model ◽  
Accident Prediction ◽  
Marquardt Algorithm ◽  
Artificial Neural

This study presents an accident prediction model of Erzurum’s Highways in Turkey using artificial neural network (ANN) approaches. There are many ANN models for predicting the number of accidents on highways that were developed using 8 years with 7,780 complete accident reports of historical data (2005-2012). The best ANN model was chosen for this task and the model parameters included years, highway sections, section length (km), annual average daily traffic (AADT), the degree of horizontal curvature, the degree of vertical curvature, traffic accidents with heavy vehicles (percentage), and traffic accidents that occurred in summer (percentage). In the ANN model development, the sigmoid activation function was employed with Levenberg-Marquardt algorithm. The performance of the developed ANN model was evaluated by mean square error (MSE), the root mean square error (RMSE), and the coefficient of determination (R2). The model results indicate that the degree of vertical curvature is the most important parameter that affects the number of accidents on highways.

Artificial Neural Network Prediction of Diesel Engine Performance and Emission Fueled With Diesel–Kerosene–Ethanol Blends: A Fuzzy-Based Optimization

2017 ◽  
Vol 139 (4) ◽  
Author(s):  
Subrata Bhowmik ◽  
Rajsekhar Panua ◽  
Durbadal Debroy ◽  
Abhishek Paul
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Diesel Engine ◽  
Specific Energy Consumption ◽  
Ann Model ◽  
Volume Percentage ◽  
Acceptable Error ◽  
Performance And Emission ◽  
Artificial Neural ◽  
The Impact

The present study explores the impact of ethanol on the performance and emission characteristics of a single cylinder indirect injection (IDI) Diesel engine fueled with Diesel–kerosene blends. Five percent ethanol is added to Diesel–kerosene blends in volumetric proportion. Ethanol addition to Diesel–kerosene blends significantly improved the brake thermal efficiency (BTE), brake specific energy consumption (BSEC), oxides of nitrogen (NOx), total hydrocarbon (THC), and carbon monoxide (CO) emission of the engine. Based on engine experimental data, an artificial neural network (ANN) model is formulated to accurately map the input (load, kerosene volume percentage, ethanol volume percentage) and output (BTE, BSEC, NOx, THC, CO) relationships. A (3-6-5) topology with Levenberg–Marquardt feed-forward back propagation (trainlm) is found to be optimal network than other training algorithms for predicting input and output relationship with acceptable error. The mean square error (MSE) of 0.000225, mean absolute percentage error (MAPE) of 2.88%, and regression coefficient (R) of 0.99893 are obtained from the developed model. The study also attempts to make clear the application of fuzzy-based analysis to optimize the network topology of ANN model.

scholarly journals Modelling the Effect of Cu Content on the Microstructure and Vickers Microhardness of Sn-9Zn Binary Eutectic Alloy Using an Artificial Neural Network

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 481
Author(s):  
Heba Y. Zahran ◽  
Hany Nazmy Soliman ◽  
Alaa F. Abd El-Rehim ◽  
Doaa M. Habashy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Eutectic Alloy ◽  
Aging Temperature ◽  
Vickers Microhardness ◽  
Ann Model ◽  
Cu Content ◽  
Binary Eutectic ◽  
Artificial Neural ◽  
The Impact

The present study aims to clarify the impact of Cu addition and aging conditions on the microstructure development and mechanical properties of Sn-9Zn binary eutectic alloy. The Sn-9Zn alloys with varying Cu content (0, 1, 2, 3, and 4 wt.%) were fabricated by permanent mold casting. X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques were utilized to investigate the influence of Cu concentration on the microstructure of pre-aged Sn-9Zn-Cu alloys. The main phases are the primary β-Sn phase, eutectic α-Zn/β-Sn phases, and γ-Cu5Zn8/η-Cu6Sn5/ε-Cu3Sn intermetallic compounds. Vickers microhardness values of Sn-9Zn alloys increased with additions of 1 and 2 wt.% Cu. When the concentration of Cu exceeds 2 wt.%, the values of microhardness declined. Besides, the increase in the aging temperature caused a decrease in the microhardness values for all the investigated alloys. The variations in the microhardness values with Cu content and/or aging temperature were interpreted on the basis of development, growth, and dissolution of formed phases. The alterations of the lattice strain, dislocation density, average crystallite size, and stacking fault probability were evaluated from the XRD profiles of the investigated alloys. Their changes with Cu content and/or aging temperature agree well with the Vickers hardness results. An artificial neural network (ANN) model was employed to simulate and predict the Vickers microhardness of the present alloys. To check the adequacy of the ANN model, the calculated results were compared with experimental data. The results confirm the high ability of the ANN model for simulating and predicting the Vickers microhardness profile for the investigated alloys. Moreover, an equation describing the experimental results was obtained mathematically depending on the ANN model.

scholarly journals Liquid Density Prediction of Ethanol/Water, Using Artificial Neural Network

2021 ◽  
Vol 12 (4) ◽  
pp. 5625-5637
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Transfer Functions ◽  
Liquid Density ◽  
Ann Model ◽  
Average Absolute Deviation ◽  
Absolute Deviation ◽  
Marquardt Algorithm ◽  
Reliable Model ◽  
Artificial Neural

In this work, our objective was to get a reliable model for predicting liquid density ethanol-water and use it again later in modeling the ethanol production process from biomass. Hence, the unreliability of the Peng-Robinson equation of state to predict this property was shown. The average absolute deviation of this prediction is equal to 14.72 %. To have a reliable model, an artificial neural network (ANN) method was followed. Levenberg–Marquardt algorithm is used to choose the optimized ANN structure that has ten neurons in the hidden layer, three neurons in the input layer, and one neuron in the output layer, with a tangent-sigmoid and linear transfer functions, in the hidden and the output layers, respectively. The model training was done using 348 experimental data points from published experiments, realized at different liquid mole fraction range, pressure (0.10 to 10.00MP), and temperature (298.15 K to 476.2 K). The correlation coefficient between the experimental and liquid phase density was 0.9999 for training, validation, and testing the model. Statistical analysis is employed to evaluate the accuracy of the ANN, showing that the average absolute deviation, root mean square, and the Bias are 0.047 %, 0.003 %, and -0.004 %, respectively. So the ANN model gives a good estimation of liquid density, for mixture ethanol/water, with a relative importance of pressure, composition, and temperature equal to 41%, 34 %, and 25 %, respectively.

scholarly journals Hysteresis modeling of impact dynamics using artificial neural network

2021 ◽  
Vol 37 ◽  
pp. 333-338
Author(s):  
T A Tabaza ◽  
O Tabaza ◽  
J Barrett ◽  
A Alsakarneh
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Impact Dynamics ◽  
Hysteresis Phenomenon ◽  
Data Sets ◽  
Ann Model ◽  
Hysteresis Modeling ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
The Impact

Abstract In this paper, the process of training an artificial neural network (ANN) on predicting the hysteresis of a viscoelastic ball and ash wood bat colliding system is discussed. To study how the material properties and the impact speed affect the hysteresis phenomenon, many experiments were conducted for colliding three types of viscoelastic balls known as sliotars at two different speeds. The aim of the study is to innovate a neural network model to predict the hysteresis phenomenon of the collision of viscoelastic materials. The model accurately captured the input data and was able to produce data sets out of the input ranges. The results show that the ANN model predicted the impact hysteresis accurately with <1% error.

Temperature Rise Prediction of Oil-Air Lubricated Angular Contact Ball Bearings Using Artificial Neural Network

2019 ◽  
Vol 12 (3) ◽  
pp. 248-261
Author(s):  
Baomin Wang ◽  
Xiao Chang
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Temperature Rise ◽  
High Speed ◽  
Ball Bearing ◽  
Influence Factors ◽  
Ball Bearings ◽  
Ann Model ◽  
Angular Contact Ball Bearing ◽  
Artificial Neural

Background: Angular contact ball bearing is an important component of many high-speed rotating mechanical systems. Oil-air lubrication makes it possible for angular contact ball bearing to operate at high speed. So the lubrication state of angular contact ball bearing directly affects the performance of the mechanical systems. However, as bearing rotation speed increases, the temperature rise is still the dominant limiting factor for improving the performance and service life of angular contact ball bearings. Therefore, it is very necessary to predict the temperature rise of angular contact ball bearings lubricated with oil-air. Objective: The purpose of this study is to provide an overview of temperature calculation of bearing from many studies and patents, and propose a new prediction method for temperature rise of angular contact ball bearing. Methods: Based on the artificial neural network and genetic algorithm, a new prediction methodology for bearings temperature rise was proposed which capitalizes on the notion that the temperature rise of oil-air lubricated angular contact ball bearing is generally coupling. The influence factors of temperature rise in high-speed angular contact ball bearings were analyzed through grey relational analysis, and the key influence factors are determined. Combined with Genetic Algorithm (GA), the Artificial Neural Network (ANN) model based on these key influence factors was built up, two groups of experimental data were used to train and validate the ANN model. Results: Compared with the ANN model, the ANN-GA model has shorter training time, higher accuracy and better stability, the output of ANN-GA model shows a good agreement with the experimental data, above 92% of bearing temperature rise under varying conditions can be predicted using the ANNGA model. Conclusion: A new method was proposed to predict the temperature rise of oil-air lubricated angular contact ball bearings based on the artificial neural network and genetic algorithm. The results show that the prediction model has good accuracy, stability and robustness.

scholarly journals Estimation of the Hot Swap Circulation Current of a Multiple Parallel Lithium Battery System with an Artificial Neural Network Model

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Nam-Gyu Lim ◽  
Jae-Yeol Kim ◽  
Seongjun Lee
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Lithium Battery ◽  
Battery Pack ◽  
Battery Management ◽  
Ann Model ◽  
Battery System ◽  
Load Current ◽  
Circulating Current ◽  
Artificial Neural

Battery applications, such as electric vehicles, electric propulsion ships, and energy storage systems, are developing rapidly, and battery management issues are gaining attention. In this application field, a battery system with a high capacity and high power in which numerous battery cells are connected in series and parallel is used. Therefore, research on a battery management system (BMS) to which various algorithms are applied for efficient use and safe operation of batteries is being conducted. In general, maintenance/replacement of multi-series/multiple parallel battery systems is only possible when there is no load current, or the entire system is shut down. However, if the circulating current generated by the voltage difference between the newly added battery and the existing battery pack is less than the allowable current of the system, the new battery can be connected while the system is running, which is called hot swapping. The circulating current generated during the hot-swap operation is determined by the battery’s state of charge (SOC), the parallel configuration of the battery system, temperature, aging, operating point, and differences in the load current. Therefore, since there is a limit to formulating a circulating current that changes in size according to these various conditions, this paper presents a circulating current estimation method, using an artificial neural network (ANN). The ANN model for estimating the hot-swap circulating current is designed for a 1S4P lithium battery pack system, consisting of one series and four parallel cells. The circulating current of the ANN model proposed in this paper is experimentally verified to be able to estimate the actual value within a 6% error range.

Sign in / Sign up

Export Citation Format

Share Document