scholarly journals Study of Homogeneous Chipboard Manufacturing u sing Betung Bamboo (Dendrocalamus Asper) Mixed with Polyethylene Addictive

2021 ◽  
Vol 11 (2) ◽  
pp. 68-71
Author(s):  
Salman Salim ◽  
◽  
Mona Lena Abdul Aziz ◽  
Sufyan Abdullah ◽  
Mohamad Hairi Osman ◽  
...  
Keyword(s):  
Water Absorption ◽  
Peninsular Malaysia ◽  
Modulus Of Rupture ◽  
Medium Density ◽  
Bamboo Species ◽  
Thickness Swelling ◽  
European Standard ◽  
Climate Conditions ◽  
Dendrocalamus Asper ◽  
Scientific Name

Bamboo is an evergreen plant native to Asia and America that grows at every altitude, even in unideal climate conditions. Betung bamboo or its scientific name Dendrocalamus Asper is one of the bamboo species that are easily found in peninsular Malaysia. This study examined the characteristics of Betung bamboo and its potential to manufacture chipboard. Several tests were conducted, namely modulus of elastic (MOE), modulus of rupture (MOR), thickness swelling (TS), and water absorption (WA) to evaluate the potential of Betung bamboo as the primary material in the manufacture of chipboard mixed with polyethylene as additive are the parameters considered. This study found that the composition of 70% bamboo and 30% polyethylene was produced optimum chipboard which met BS EN standards (British and European Standard). It was also found that the MOE and MOR values of the resulting chipboard exceeded the medium density board standards. For WA and TS values, the chipboard achieved the standard requirements. Thus, this study concludes that chipboard made of Betung bamboo with the addition of polyethylene is suitable to be applied for internal and external doors, and internal paneling for any commercial or domestic building and furniture.

Effect of Ozone Treatment on Properties of Screw Pressed and Non-Screw Pressed Empty Fruit Bunch Medium Density Particleboard

2015 ◽  
Vol 1134 ◽  
pp. 116-122
Author(s):  
Roslan Ali ◽  
Mohamad Nurul Azman Mohammad Taib ◽  
Kamal Wok ◽  
Shawaluddin Tahiruddin ◽  
Mohd Amrin Abdullah
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Water Absorption ◽  
Modulus Of Elasticity ◽  
Modulus Of Rupture ◽  
Ozone Treatment ◽  
Medium Density ◽  
Internal Bonding ◽  
Empty Fruit Bunch ◽  
Thickness Swelling

This study was done to investigate the effects of ozone treatment as a method to improve the properties of empty fruit bunch (EFB) medium density particleboard. Two types of EFB were used in this study i.e. screw pressed and non-screw pressed empty fruit bunch. These EFB were treated in an ozone chamber for 8 hours prior to particleboard manufacturing. The mechanical properties, Modulus of Elasticity (MOE), Modulus of Rupture (MOR) and Internal Bonding (IB) and physical properties, water Absorption (WA) and Thickness Swelling (TS) of EFB particleboard were determined. The results showed that the ozone treatment could increase the MOR and IB values of EFB particleboard, but had no significant effect on MOE values. For physical properties, the values showed no improvement for TS and WA. The panels manufactured using ozone treatment was found suitable for applications for furniture products.

Medium Density Particleboard with Addition of Impregnated Paper

2014 ◽  
Vol 1025-1026 ◽  
pp. 543-546
Author(s):  
Juliana Cortez Barbosa ◽  
Anderson Luiz da Silva Michelon ◽  
Elen Aparecida Martines Morales ◽  
Cristiane Inácio de Campos ◽  
André Luis Christoforo ◽  
...  
Keyword(s):  
Moisture Content ◽  
Modulus Of Elasticity ◽  
Mechanical Tests ◽  
Modulus Of Rupture ◽  
Medium Density ◽  
Test Results ◽  
Thickness Swelling ◽  
Adhesion Test ◽  
Layer Medium ◽  
Determine Moisture Content

The aim of this research was to produce three-layer Medium Density Particleboard (MDP), with the addition of impregnated paper, in the inner layer, in proportions of 1; 5 and 20%. In this study, MDP was composed with particles of small size in outer layers, and larger particles in internal layer. After panel manufacturing, physical and mechanical tests based on Brazilian Code ABNT NBR 14.810 were carried out to determine moisture content; density; thickness swelling; water absorption; modulus of rupture (MOR) and modulus of elasticity (MOE) in static bending and internal adhesion. Test results were compared to commercial panels, produced with 100% Eucalyptus, considering the requirements specified by Brazilian Code. Properties presented values close to normative specifications, indicating positively the possibility of production of MDP using addition of waste paper impregnated.

scholarly journals Soybean waste in particleboard production

2018 ◽  
Vol 42 (2) ◽  
pp. 186-194 ◽  
Author(s):  
Evelyn Hoffmamm Martins ◽  
Alan Pereira Vilela ◽  
Rafael Farinassi Mendes ◽  
Lourival Marin Mendes ◽  
Lívia Elisabeth Vasconcellos de Siqueira Brandão Vaz ◽  
...  
Keyword(s):  
Water Absorption ◽  
Water Immersion ◽  
Eucalyptus Grandis ◽  
Raw Material ◽  
Modulus Of Rupture ◽  
High Yield ◽  
Thickness Swelling ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
Hybrid Eucalyptus

ABSTRACT Brazil is the second largest soybean producer in the world, with a yield of around 96.2 million tons per crop. This high yield leads to a great amount of waste resulting from soybean cultivation, which can reach approximately 41 million tons of waste per year. This material has lignocellulosic properties, which may enable its use as a raw material for particleboard production. Therefore, the objective of this study was to evaluate the use of soybean pods in particleboard production. For particleboard manufacture, wood of the hybrid Eucalyptus urophylla and Eucalyptus grandis was used, added with soybean pods, at proportions of 0%, 25%, 50%, 75% and 100%. For particleboard evaluation, a completely randomized design was used, with five treatments and three replicates, using linear regression and the Scott-Knott test at 5% significance for comparison among the different treatments. The properties apparent density, compaction ratio, water absorption after 2 and 24 hours, thickness swelling after 2 and 24 hours in water immersion, internal bonding, modulus of rupture and modulus of elasticity in bending properties were evaluated. The ratio soybean pod waste and eucalyptus particles in the panels led to an increase in water absorption values and thickness swelling, in addition to a decrease in mechanical properties. The production of panels with approximately 23% soybean pods is feasible.

scholarly journals Sifat Papan Partikel Bambu Petung (Dendrocalamus asper) dan Bambu Wulung (Gigantochloa atroviolacea) dengan Perlakuan Ekstraksi

2020 ◽  
Vol 14 (1) ◽  
pp. 84
Author(s):  
Ragil Widyorini ◽  
Ikhwan Syahri ◽  
Greitta Kusuma Dewi
Keyword(s):  
Citric Acid ◽  
Bond Strength ◽  
Internal Bond ◽  
Cold Water ◽  
Internal Bond Strength ◽  
Modulus Of Rupture ◽  
Bamboo Species ◽  
Japanese Industrial Standard ◽  
Dendrocalamus Asper ◽  
Extraction Treatment

Bambu memiliki kandungan ekstraktif dengan persentase yang berbeda antar jenis bambu. Penelitian ini bertujuan untuk mengetahui pengaruh perlakuan ekstraksi pada jenis bambu yang berbeda terhadap sifat papan partikel. Dua jenis bambu digunakan yaitu Bambu Petung (Dendrocalamus asper) dan Bambu Wulung (Gigantochloa atroviolacea). Perlakuan ekstraksi digunakan pada partikel bambu sebelum proses pembuatan papan partikel yaitu tanpa ekstraksi, ekstraksi air dingin dan ekstraksi air panas. Papan partikel dibuat dalam ukuran 25 cm x 25 cm x 0,7 cm, target kerapatan 0,9 g/cm3, jumlah asam sitrat 30%, serta kondisi pengempaan suhu 180°C selama 10 menit. Hasil penelitian menunjukkan bahwa interaksi perlakuan ekstraksi dan jenis bambu hanya berpengaruh signifikan pada sifat penyerapan air dan keteguhan rekat internal, sedangkan jenis bambu berpengaruh signifikan pada nilai kadar air, modulus patah dan modulus elastisitas. Semua papan partikel yang dihasilkan memenuhi standar Japanese Industrial Standard (JIS) A 5908 tipe 13. Pada penelitian ini, papan partikel dari bambu wulung tanpa perlakuan ekstraksi mempunyai nilai yang memenuhi standar tipe 18 dan berpotensi sebagai bahan baku untuk produk furnitur eksterior. Perlakuan ekstraksi dapat meningkatkan secara signifikan nilai keteguhan rekat internal papan partikel bambu petung, walaupun secara umum dengan jumlah asam sitrat 30% perlakuan tersebut tidak diperlukan pada papan partikel bambu Properties of Particleboard made from Petung Bamboo (Dendrocalamus asper) and Wulung Bamboo (Gigantochloa atroviolacea) Particles with Extraction TreatmentAbstractBamboo has extractives, which the percentage of extractive was different based on bamboo species. This research aimed to investigate the effect of extraction treatment at different bamboo species on the particleboard properties. Two types of bamboo were used, i.e. Petung bamboo (Dendrocalamus asper) and Wulung bamboo (Gigantochloa atroviolacea). Three extraction treatments were conducted to the bamboo particles before the particleboard manufacture, i.e. unextracted, cold-water extraction, and hot-waterextraction. The particleboard was made in the size of 25 cm x 25 cm x 0.7 cm, target density of 0.9 g/cm³, citric acid content of 30%, and pressing temperature of 180°C for 10 min. The results showed that the interaction between extraction treatment and bamboo species significantly affected on the water absorption and internal bond strength, however bamboo species affected significantly on the moisture content, modulus of rupture, and modulus of elasticity. All of particleboards could met the requirement of the 13 type of Japanese Industrial Standard (JIS) A 5908. In this research, particleboards made from wulung bamboo particles without extraction treatment have properties that met the requirement of the 18 type and the products have potential to be as exterior materials for furniture. In general, an extraction treatment was not an important step on the manufacturing of bamboo particleboard using citric acid 30% as adhesive. However, the extraction treatment could increase significantly the internal bond strength of particleboard made from petung bamboo.

Properties of thermally modified medium-density fibreboards

Holzforschung ◽  
2012 ◽  
Vol 66 (1) ◽  
Author(s):  
Jürgen Bonigut ◽  
Detlef Krug ◽  
Beate Stephani
Keyword(s):  
Thermal Treatment ◽  
Moisture Content ◽  
Equilibrium Moisture Content ◽  
Phenol Formaldehyde ◽  
Creep Behaviour ◽  
Modulus Of Rupture ◽  
Medium Density ◽  
Thickness Swelling ◽  
Short Term ◽  
European Standards

Abstract Thermal treatment of solid timber and oriented strandboards (OSB) improves durability against fungal decay and dimensional stability (swelling and shrinking). It is not clear whether thermal treatment of medium-density fibreboards (MDF) has the same effects. In this work, four variants of phenol-formaldehyde (PF)-bonded MDF with varying contents of resin and hydrophobing agent were thermally post-treated according to the Mühlböck procedure at three different maxi-mum temperatures. The short-term properties internal bond, modulus of rupture, modulus of elasticity, thickness swelling and equilibrium moisture content and the long-term property creep behaviour of treated variants and of one untreated variant have been tested. The results are presented and discussed in comparison with the respective European standards. Altogether, the thermal treatment had a positive effect on most of the tested mechanical short-term properties. The moisture-related properties, i.e., thickness swelling and equilibrium moisture content, were also positively influenced. The creep behaviour of heat-treated MDF could also be improved by thermal modification.

Effect of juvenile wood on strength properties and dimensional stability of black spruce medium-density fiberboard panels

Holzforschung ◽  
2005 ◽  
Vol 59 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Jun Li Shi ◽  
Shu Yin Zhang ◽  
Bernard Riedl
Keyword(s):  
Water Absorption ◽  
Dimensional Stability ◽  
Juvenile Wood ◽  
Black Spruce ◽  
Medium Density Fiberboard ◽  
Strength Properties ◽  
Analysis Of Covariance ◽  
Modulus Of Rupture ◽  
Medium Density ◽  
Mean Values

Abstract Strength properties and dimensional stability of medium-density fiberboard (MDF) panels made from black spruce (Picea mariana [Mill.] BSP.) 0–20, 21–40, and over 40 year old fiber were studied. An analysis of covariance (ANCOVA) was performed to examine the differences in modulus of rupture (MOR), modulus of elasticity (MOE), and thickness swell (TS) of the three types of panels, while panel density was treated as a covariate in order to adjust the mean values that were partly attributed to panel density. The results indicate that MOR, internal bond (IB), and water absorption of MDF panels made from 0–20 year old fiber, which contained 100% juvenile wood, were significantly superior to those of panels made from 21–40 and over 40 year old fiber; but linear expansion (LE) of MDF panels made from 0–20 year old fiber was significantly larger than that of panels from the other two age classes. The differences in MOR, IB, water absorption, and LE between panels made from 21–40 and over 40 year old fiber were not significant. The comparisons of panel MOE and TS were relatively dependent on panel density due to existence of interactions among the three age groups.

Thermomechanical (TMP) and Chemo-Thermomechanical Pulps (CTMP) for Medium Density Fibreboards (MDF)

Holzforschung ◽  
2001 ◽  
Vol 55 (2) ◽  
pp. 214-218 ◽  
Author(s):  
Edmone Roffael ◽  
Brigitte Dix ◽  
Thomas Schneider
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Internal Bond ◽  
Urea Formaldehyde ◽  
Medium Density ◽  
Thickness Swelling ◽  
Negative Effect ◽  
Pilot Plant Scale ◽  
Drying Conditions ◽  
Internal Bonding Strength

Summary Thermomechanical (TMP) and chemo-thermomechanical pulps (CTMP) were prepared from spruce under different pulping conditions. The fibres were dried at 70 °C and medium density fibreboards (MDF) were made therefrom in pilot plant scale using urea-formaldehyde resins as a binder. The results of testing the physical-mechanical properties reveal that the pulping temperature has a significant influence on the thickness swelling and water absorption of the boards. MDF prepared from fibres produced at high pulping temperature (180 °C) generally show lower thickness swelling and water absorption than MDF made from fibres produced at low pulping temperature (140°C and 160 °C). However, high pulping temperature may have a negative effect on the internal bond strength of the boards. In general, CTMP leads to MDF with higher internal bonding strength compared to those derived from TMP. In addition, the influence of different drying conditions (150 °C and 170 °C) of TMP and CTMP on the physical-mechanical properties of MDF was assessed. MDF made from CTMP showed lower thickness swelling when dried under high temperature.

Effect of Particle Size on Some Properties of Rice Husk Particleboard

2007 ◽  
Vol 18-19 ◽  
pp. 43-48 ◽  
Author(s):  
J.O. Osarenmwinda ◽  
J.C. Nwachukwu
Keyword(s):  
Particle Size ◽  
Physical Properties ◽  
Water Absorption ◽  
Rice Husk ◽  
Modulus Of Elasticity ◽  
Internal Bond ◽  
Elasticity Modulus ◽  
Modulus Of Rupture ◽  
Thickness Swelling ◽  
Effect Of Particle Size

The purpose of this study was to determine the effect of particle size on the mechanical properties (Modulus of Elasticity, Modulus of Rupture, and Internal Bond) and physical properties (thickness swelling and water absorption) of rice husk particleboard. The particle sizes used were 1.0mm, 1.18mm, 2mm, 2.36mm and 2.80mm. Each was mixed with a constant resin (urea formaldehyde) concentration of 20% of oven dry weight of rice husk particles. The results showed that as the particle size increased, the particleboard’s mechanical and physical properties decreased. For example, the modulus of elasticity, modulus of rupture, internal bond, thickness swelling and water absorption for 1.0mm particle size particleboard were 1590N/mm2, 11.11N/mm2, 0.28N/mm2,10.90% and 38.53% respectively, while for 2.8mm particle size they were 1958N/mm2,14.2N/mm2, 0.44N/mm2, 11.51% and 47.21% respectively. Overall results showed that particleboard made from rice husk exceed the EN standard for modulus of elasticity, modulus of rupture, internal bond. However, thickness swelling values were poor. Hence, the smaller the particle size the better the properties of the particleboard.

scholarly journals INFLUENCE OF THERMAL MODIFICATION ON THE PHYSICAL AND MECHANICAL PROPERTIES OF Eucalyptus badjensis MIXED PARTICLEBOARD / OSB PANELS

FLORESTA ◽  
2021 ◽  
Vol 51 (2) ◽  
pp. 419
Author(s):  
Giuliano Ferreira Pereira ◽  
Setsuo Iwakiri ◽  
Rosilani Trianoski ◽  
Polliana D'angelo Rios ◽  
Renan Zunta Raia
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Phenol Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Dry Mass ◽  
Thermal Modification ◽  
Modulus Of Rupture ◽  
Thickness Swelling ◽  
Swelling Properties ◽  
Different Temperatures

The objective of this research was to evaluate the effects of thermal modifications, at different temperatures and exposure times, on the technological properties of mixed particleboard / OSB panels made out of Eucalyptus badjensis. Using the wood of Eucalyptus badjensis, Particleboard, OSB and mixed Particleboard/OSB panels (control and thermally modified) were manufactured. The mixed panels’ thermal modification was carried out under three temperatures (180ºC, 200ºC and 220ºC) and two exposure times (10 minutes and 12 minutes). For the panels’ manufacturing, 6% of phenol-formaldehyde adhesive and 1% of paraffin were employed, which was calculated based on the particles’ dry mass. The water absorption and thickness swelling properties were evaluated after 2 and 24 hours of immersion, in addition to the panels’ modulus of elasticity, modulus of rupture and internal bond. Based on the results, we were able to conclude that the thermal modification affected most of the physical properties positively. From the different exposure times studied, the most effective one was the period of 12 minutes, especially for water absorption after 2 hours, which caused a reduction of 11.27%. In turn, the most effective temperature was of 220ºC, highlighting the thickness swelling after 24 hours, which caused a swelling decrease of 23.76% in comparison with the control panels. Regarding the mechanical properties, the thermal modification, in terms of the studied exposure times and temperatures, did not affect the results of the mixed particleboard /OSB panels. 

scholarly journals Effects of Resin Content on the Characteristics of Bamboo Oriented Strand Board Prepared from Strands of Betung, Ampel, and Their Mixtures

2021 ◽  
Vol 9 (3) ◽  
pp. 454-465
Author(s):  
Tengku Muhammad Renzy Hariz ◽  
Indra Agus Santosa ◽  
Muhammad Iqbal Maulana ◽  
Marwanto ◽  
Denni Prasetia ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Dimensional Stability ◽  
Oriented Strand Board ◽  
Physical And Mechanical Properties ◽  
Resin Content ◽  
Thickness Swelling ◽  
Higher Dimensional ◽  
Bambusa Vulgaris ◽  
Dendrocalamus Asper

The objectives of this research were to evaluate bamboo-oriented strand board (BOSB) characteristics made from betung (Dendrocalamus asper), ampel (Bambusa vulgaris), and their mixtures at two different contents (3% and 5%) of methylene diphenyl di-isocyanate (MDI) adhesives. The strands were steam-treated at 126°C for 1 h under the pressure of 0.14 MPa. Three-layered BOSBs with a target density of 0.7 g/cm3 were made with the size of 30 cm x 30 cm x 0.9 cm and a shelling ratio of 1:2:1 (face:core:back layers). The physical and mechanical properties of BOSB were evaluated following JIS A 5908 (2003) standard, and the results were compared with the CSA 0437.0 Grade O-1 standard. The results show that BOSB from the mixtures of betung and ampel bamboo strands has higher dimensional stability as shown by the decrease in water absorption and thickness swelling and higher mechanical properties than single BOSB. All BOSBs with 5% resin content have higher dimensional stability, MOE, and MOR than BOSB with 3% resin content. The physical and mechanical properties of all BOSB manufactured met the CSA 0437.0 Grade O-1 standard. This study proved that BOSBs from the mixture of betung and ampel strands have the potential to be developed due to having better physical and mechanical qualities than a single BOSB. Keywords: ampel (Bambusa vulgaris), bamboo oriented strand board, betung (Dendrocalamus asper), resin content, strand mixtures

Sign in / Sign up

Export Citation Format

Share Document