scholarly journals Design and Implementation of Full Adder using Different XOR Gates

2020 ◽  
Vol 9 (4) ◽  
pp. 1422-1426
Keyword(s):  
Integrated Circuits ◽  
Power Consumption ◽  
Great Part ◽  
Reducing Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Full Adder ◽  
Oxide Semiconductor ◽  
Performance Criteria ◽  
Xor Gate ◽  
Pass Transistor

A Full Adder is a logical circuit that servers a great part in the design of application particular integrated circuits. It is the basic component found in VLSI and DSP applications. The applications of Full adder in VLSI include ALU design, Address generation in processors, Multipliers and so on. Power consumption is one of the most significant parameters of full adder. Therefore, reducing power consumption in full adder is very important. In this paper, Design XOR gate using Transmission gate logic (TGL), Pass transistor logic (PTL) and Static Complementary metal oxide semiconductor logic (CMOS). Also design Full Adder circuit using different XOR gate designs. These circuits are designed and implemented, simulated using Mentor Graphics Tool. After getting simulation results, compare the different XOR gate designs based full adders in terms of power consumption and delay. Using the comparative analysis for the designed Full Adders, an effective adder design can be chosen based on the performance criteria as required by the designer.

scholarly journals High-speed programmable photonic circuits in a cryogenically compatible, visible–near-infrared 200 mm CMOS architecture

2021 ◽  
Author(s):  
Mark Dong ◽  
Genevieve Clark ◽  
Andrew J. Leenheer ◽  
Matthew Zimmermann ◽  
Daniel Dominguez ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Power Consumption ◽  
High Speed ◽  
Large Scale ◽  
Near Infrared ◽  
Response Times ◽  
Photonic Integrated Circuits ◽  
Complementary Metal Oxide Semiconductor ◽  
Phase Shifters ◽  
Oxide Semiconductor

AbstractRecent advances in photonic integrated circuits have enabled a new generation of programmable Mach–Zehnder meshes (MZMs) realized by using cascaded Mach–Zehnder interferometers capable of universal linear-optical transformations on N input/output optical modes. MZMs serve critical functions in photonic quantum information processing, quantum-enhanced sensor networks, machine learning and other applications. However, MZM implementations reported to date rely on thermo-optic phase shifters, which limit applications due to slow response times and high power consumption. Here we introduce a large-scale MZM platform made in a 200 mm complementary metal–oxide–semiconductor foundry, which uses aluminium nitride piezo-optomechanical actuators coupled to silicon nitride waveguides, enabling low-loss propagation with phase modulation at greater than 100 MHz in the visible–near-infrared wavelengths. Moreover, the vanishingly low hold-power consumption of the piezo-actuators enables these photonic integrated circuits to operate at cryogenic temperatures, paving the way for a fully integrated device architecture for a range of quantum applications.

scholarly journals Design of High-Speed Low Power Computational Blocks for DSP Processors

2021 ◽  
Vol 11 (2) ◽  
pp. 1419-1429
Author(s):  
Alivelu Manga N.
Keyword(s):  
Signal Processing ◽  
Integrated Circuits ◽  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Large Scale ◽  
Power Optimization ◽  
Digital Signal ◽  
Oxide Semiconductor ◽  
Performance Criteria

In today’s deep submicron VLSI (Very Large-Scale Integration) Integrated Circuits, power optimization and speed play a very important role. This importance for low power has initiated the designs where power dissipation is equally important as performance and area. Power reduction and power management are the key challenges in the design of circuits down to 100nm. For power optimization, there are several techniques and extension designs are applied in the literature. In real time Digital Signal Processing applications, multiplication and accumulation are significant operations. The primary performance criteria for these signal processing operations are speed and power consumption. To lower the power consumption, there are techniques like Multi threshold (Multi-Vth), Dula-Vth etc. Among those, a technique known as GDI (Gate diffusion Input) is used which allows reduction in power, delay and area of digital circuits, while maintaining low complexity of logic design. In this paper, various signal processing blocks like parallel-prefix adder, Braun multiplier and a Barrel shifter are designed using GDI (Gate diffusion Input) technique and compared with conventional CMOS (Complementary Metal Oxide Semiconductor) based designs in terms of delay and speed. The designs are simulated using Cadence Virtuoso 45nm technology. The Simulation results shows that GDI based designs consume less power and delay also reduced compared to CMOS based designs.

scholarly journals Implementation of Low Power High Speed Adder’s using GDI Logic

2019 ◽  
Vol 8 (11) ◽  
pp. 1291-1298
Keyword(s):  
High Speed ◽  
Digital Circuits ◽  
Arithmetic Operation ◽  
Complementary Metal Oxide Semiconductor ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Basic Block ◽  
Look Ahead ◽  
Pass Transistor

Addition is a vital arithmetic operation and is the base of other arithmetic operations such as multiplication, subtraction and division. Adder is a digital circuit that does addition of binary numbers. The 1-bit full adder is the basic block of an arithmetic unit. In VLSI, there are many efficient techniques to design digital circuits. Some of the techniques are Pass Transistor logic (PTL), Complementary metal oxide semiconductor (CMOS) and Transmitter gate (TG). There are several adder designs implemented to reduce the power. However, each design undergoes from precise disadvantage. The adder design with good driving capability requires more power and the design with more delay which consumes less power. In this paper 8-bit Carry Increment Adder (CIA), Carry Bypass Adder (CBA), Carry Skip Adder (CSKA), Carry Look Ahead Adder (CLA), Kogge Stone Adder (KSA), Han Carlson Adder (HCA), and Brent Kung Adder (BKA) are implemented using Gate Diffusion Input (GDI) logic. These designs are simulated and implemented using Tanner tool. The result shows that CBA, CLA, and KSA designs using GDI logic are more efficient compared to CMOS logic in view of power consumption, delay, and area (transistors count) respectively

scholarly journals The Mixed Logic Style based Low Power and High Speed One-bit Binary adder for SOI Designs AT 32NM Technology

2019 ◽  
Vol 8 (4) ◽  
pp. 361-366
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Full Adder ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Binary adders are the fundamental building blocks to construct Data Processing arithmetic units. A novel one-bit full adder is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the one-bit full adder like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual Voltage Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity and by improving the driving capability. This Mixed logic style provides 83.53% average power consumption and Propagation Delay of 14.02% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of the Full adder logic at different voltages. The 32nm model file is used for MOS transistors

scholarly journals An E-Band 21-dB Variable-Gain Amplifier with 0.5-V Supply in 40-nm CMOS

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 804
Author(s):  
Gibeom Shin ◽  
Kyunghwan Kim ◽  
Kangseop Lee ◽  
Hyun-Hak Jeong ◽  
Ho-Jin Song
Keyword(s):  
Power Consumption ◽  
Frequency Band ◽  
Noise Figure ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Operating Frequency ◽  
Variable Gain Amplifier ◽  
Variable Gain ◽  
Operating Frequency Band ◽  
Shunt Capacitors

This paper presents a variable-gain amplifier (VGA) in the 68–78 GHz range. To reduce DC power consumption, the drain voltage was set to 0.5 V with competitive performance in the gain and the noise figure. High-Q shunt capacitors were employed at the gate terminal of the core transistors to move input matching points for easy matching with a compact transformer. The four stages amplifier fabricated in 40-nm bulk complementary metal oxide semiconductor (CMOS) showed a peak gain of 24.5 dB at 71.3 GHz and 3‑dB bandwidth of more than 10 GHz in 68–78 GHz range with approximately 4.8-mW power consumption per stage. Gate-bias control of the second stage in which feedback capacitances were neutralized with cross-coupled capacitors allowed us to vary the gain by around 21 dB in the operating frequency band. The noise figure was estimated to be better than 5.9 dB in the operating frequency band from the full electromagnetic (EM) simulation.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (3) ◽  
pp. 3037-3045
Author(s):  
M. Naga Gowtham Et.al
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (5) ◽  
pp. 92-100
Author(s):  
M. Naga Gowtham, P.S Hari Krishna Reddy, K Jeevitha, K Hari Kishore, E Raghuveera, Shaik Razia
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

Analysis and Simulation of a Low-Leakage Analog Single Gate and FinFET Circuits

2014 ◽  
Vol 13 (02) ◽  
pp. 1450012 ◽  
Author(s):  
Manorama Chauhan ◽  
Ravindra Singh Kushwah ◽  
Pavan Shrivastava ◽  
Shyam Akashe
Keyword(s):  
Integrated Circuits ◽  
Metal Oxide ◽  
Low Power ◽  
High Performance ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Short Channel ◽  
State Dependency ◽  
Low Leakage

In the world of Integrated Circuits, complementary metal–oxide–semiconductor (CMOS) has lost its ability during scaling beyond 50 nm. Scaling causes severe short channel effects (SCEs) which are difficult to suppress. FinFET devices undertake to replace usual Metal Oxide Semiconductor Field Effect Transistor (MOSFETs) because of their better ability in controlling leakage and diminishing SCEs while delivering a strong drive current. In this paper, we present a relative examination of FinFET with the double gate MOSFET (DGMOSFET) and conventional bulk Si single gate MOSFET (SGMOSFET) by using Cadence Virtuoso simulation tool. Physics-based numerical two-dimensional simulation results for FinFET device, circuit power is presented, and classifying that FinFET technology is an ideal applicant for low power applications. Exclusive FinFET device features resulting from gate–gate coupling are conversed and efficiently exploited for optimal low leakage device design. Design trade-off for FinFET power and performance are suggested for low power and high performance applications. Whole power consumptions of static and dynamic circuits and latches for FinFET device, believing state dependency, show that leakage currents for FinFET circuits are reduced by a factor of over ~ 10X, compared to DGMOSFET and ~ 20X compared with SGMOSFET.

Sign in / Sign up

Export Citation Format

Share Document