scholarly journals Soil Stabilization using Brick Kiln Dust and waste Coir Fibre

2019 ◽  
Vol 8 (2) ◽  
pp. 2574-2578

Stabilization of clay soil has been carried out for improving its engineering properties of soil. To stabilize the clayey soil use Brick Kiln Dust of and waste Coir Fibre, an experiment is conducted to evaluate the properties of soil mixing with 10%, 20% &30% percentage of Brick Kiln Dust and Coir Fibre contents of 0.5%, 0.75% and 1.0% by weight of soil sample and then the tests are performed. Tests conducted for clayey soil mixed with Brick Kiln Dust and Coir Fibre are Liquid Limit, Plastic Limit, Compaction (OMC & MDD), and California Bearing Ratio (CBR). Flexible pavements sections were degined for non-stabilized and stabilized subgrades to be standard axles traffic intensities. The preamble of brick kiln dust and coir fiber is analyzed to improve the features of expansion subgrade materials and other sub-base materials. Also design the thickness of pavement when it is stabilized with optimized brick kiln dust and coir fiber. The results reveal that CBR value increased with increase of Brick Kiln Dust and Coir fibre. The soil stabilization treatment significantly improved the engineering properties of the soil, and reduced the pavement thickness and also cost of the project.

The focus of this report is to study the feasibility of stabilizing the soil by using rice husk ash and coconut coir fibre, thus re-using the waste materials and providing an economical and eco-friendly method of soil stabilization. Soil stabilisation is a system to treat the soil to improve the performance of the soil. The capacity, rice husk ash as stabilizing additive to expansive soil is evaluated for the enhancing engineering properties of expansive soil. The Assessment includes the dedication of the swelling capacity, plastic limit, liquid limit, plasticity index, cohesion & compaction characteristics of the expansive soil. For the soil which lacks enough stability, various stabilization techniques can be adopted. Various percentage of rice husk ash and coconut coir Fibre (5% to 25%). the practices were executed on 5 proportions 5% ,10%,15%, 20% and 25% with the sample. The optimum value of the assessment is found at the proportion of 15% in table 3i.e.the value of unconfined compressive strength is 142kN/m2. Expansive clays are very problematic soils and not suitable for construction. Because of the change in volume when it exposes to water. Usually in rainy season, they absorb water and swells and in summer it shrinks.


2020 ◽  
Vol 9 (11) ◽  
pp. 129-132
Author(s):  
Necmi Yarba ◽  
Ekrem Kalkan

Soil stabilization known as the process of improving the engineering properties of soils is a method applied when the engineering properties of soil are not suitable for purpose. There are several methods of soil stabilization that could be implemented to improve the physical characteristics of the soil. In this study, the pine tree sawdust as an organic material wase used as additive material for stabilization of clayey soils and the influence of pine tree sawdust on the geotechnical properties of clayey soil was investigated in terms of strength behaviors. The pine tree sawdust is an organic waste resulting from the mechanical milling or processing of timber (wood) into various standard shapes and useable sizes. The strength properties of the clayey soil when blended with pine tree sawdust indicates that the pine tree sawdust is a good stabilization material for this problematic soil. As a result, it is concluded that the pine tree sawdust material as an organic material can be successfully used for the reinforce of clayey soils in the geotechnical applications.


2018 ◽  
Vol 162 ◽  
pp. 01020 ◽  
Author(s):  
Nahla Salim ◽  
Kawther Al-Soudany ◽  
Nora Jajjawi

All structures built on soft soil may experience uncontrollable settlement and critical bearing capacity. This may not meet the design requirements for the geotechnical engineer. Soil stabilization is the change of these undesirable properties in order to meet the requirements. Traditional methods of stabilizing or through in-situ ground improvement such as compaction or replacement technique is usually costly. Now a safe and economic disposal of industrial wastes and development of economically feasible ground improvement techniques are the important challenges being faced by the engineering community. This work focuses on improving the soft soil brought from Baghdad by utilizing the local waste material for stabilization of soil, such as by using “Nylon carry bag’s by product” with the different percentage and corresponding to 1 %, 3% and 5% (the portion of stabilizer matters to soil net weight) of dried soil. The results indicated that as Nylon’s fiber content increases, the liquid limit decreases while the plastic limit increases, so the plasticity index decreases. Furthermore, the maximum dry density decreases while, the optimum moisture content increases as the Nylon’s fiber percentage increases. The compression index (decreases as the Nylon’s fiber increases and provides a maximum of 43% reduction by adding 5% nylon waste material. In addition, the results indicated that, the undrained shear strength increases as the nylon fiber increases.


Author(s):  
K.U. Arathi ◽  
K.M. Arhulya ◽  
V. Vinaya ◽  
P.V. Pooja ◽  
V.V. Athira

Black cotton soil is a soil with low bearing capacity, swelling and shrinkage characteristics. Due to its peculiar characteristics, it forms a very poor foundation material. As black cotton soil is an expansive soil; it creates problem for lightly loaded structure than moderately loaded structure. Through this project, we are trying to study the improvements in the properties of soil by adding coconut fiber of varying percentages. Tests will be conducted to determine liquid limit and unconfined compression strength. Stabilization of soil is an effective method for improving the properties of soil. It has great significance in the future projects. Keywords: Soil stabilization, CBR, Atterberg limits


2018 ◽  
Vol 7 (1) ◽  
pp. 28-32
Author(s):  
R. Iswarya . ◽  
V. Satheeskumar .

The soil must be able to withstand the load and transfer it to ground within the range of allowable deformations, for which it must possess good physical and geotechnical properties. The conventional method of stabilization such as removal and replacement of ill – suited soils incur higher cost and is time consuming. A new method of stabilization, designated as chemical stabilization can be adopted. This method initiate chemical reactions such as cation exchange, pozzolanic activity etc., which consequently enhance the geotechnical properties of soil. In this study, the mechanical behavior of soil is improved by addition of nanoparticles i.e., nano silica along with cementitious material, lime. Considering economic issues of nano silica usage and results of this research in soil stabilization projects, in this study 0, 1, 3 and 5 % weight of nano silica is used as well as 0, 2 and 4 % weight of lime is used. The effect of these replacements is studied by Atterberg limits test, compaction test and unconfined compressive strength (UCS) test. The effect of curing time on samples at 3, 7 and 28 days of age has also been investigated. The optimum percentage replacement of nano silica in lime stabilized soil is determined. The microstructure of the stabilized soil is studied by Scanning electron microscopy (SEM) test. Thus the results proved that there is a significant improvement in the plasticity, compaction and strength properties with slight addition of nano silica in clayey soil mixed with lime.


2021 ◽  
Vol 6 (2) ◽  
pp. 044-050
Author(s):  
Tsion Mindaye ◽  
Emer Tucay Quezon ◽  
Temesgen Ayna

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.


2018 ◽  
Vol 162 ◽  
pp. 01017
Author(s):  
Kawther Al-Soudany

This paper evaluates the use of silica fumes as modification of fine-grained soil in order to alter undesirable properties of the native soil and create new useful soils. Silica fume as well as clay material, are used in changing the engineering properties to be compatible and satisfying this is due to their pozzolanic reactivity. The study aims to investigate the uses of these materials in geotechnical engineering and to improve the properties of soils. Four percentages of silica fumes were used in the present study, which is 0, 3, 5 and 7%. Classification, specific gravity, compaction characteristics, swell and swell pressure, CBR and compressive strength tests had been conducted on the prepared and modified soils. Results clarified that the silica fume increasing leads to decrease the plasticity index and liquid limit. Increasing in silica fume causes an increasing in plastic limit and optimum water contents while the maximum dry unit weight values decrease. The compressive shear strength, California Bearing Ratio (CBR), swell and swell pressure is improved by using silica fume so that silica fume can be considered as a successful material in improving the soil properties.


2012 ◽  
Vol 248 ◽  
pp. 292-297 ◽  
Author(s):  
Ahmad Rifa’i ◽  
Noriyuki Yasufuku ◽  
Kiyoshi Omine

Volcanic ash becomes environmental important issues as waste material if it is not effectively reduced or reused. In engineering practice, utilization of volcanic ash as substitution material is limited. Indonesia has a large road on soft soil and volcanic ash. The objectives of this paper are focused to study the characterization, classification and utilization of volcanic ash as soil stabilization material which give benefit in engineering practice and also be environmental friendly material. Engineering properties, mineral composition and soil mixture characteristics involve physical and mechanical properties are discussed. Result shows that the effect of addition of volcanic ash after curing time 14 days can improve the engineering properties of soft soil, decrease liquid limit, change curve of grain size distribution, increase bearing capacity, and decrease swelling potential. The soil-volcanic ash mixture with 35% of volcanic ash and 5% of lime is obtained as optimum mixture design. This result is still early stage and need further study.


Author(s):  
Shreya Ambagade

Soil Stabilization is the alteration of soils to enhance their physical properties. Stabilization can increase the shear strength of a soil and/or control the shrink-swell properties of a soil, thus improving the load bearing capacity of a sub-grade to support pavements and foundations. The Engineering Properties of soil are depended on the many points like minerals, water table, soil water behaviour etc. which vary as per area to area. Due to which we can’t get desire properties suitable to our needs of construction. To resolve this problem, we have technique called stabilization which means to stable or to modify or to improve the soil properties in positive manner. So, we can have a construction works which fulfil our needs and objective.


Sign in / Sign up

Export Citation Format

Share Document