scholarly journals Inset Fed Horizontal Wide U-Shaped Slotted Microstrip Antenna for Multi-band Operation

2019 ◽  
Vol 8 (3) ◽  
pp. 6155-6159
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Antenna Design ◽  
Band Width ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Multi Band

A multi-band horizontal wide U-slotted patch antenna is proposed for wireless communication. Along with the horizontal wide U-slot, the proposed antenna also consists of four truncated corners along with inset feeding for proper antenna matching. The proposed antenna design has three distinct simulated resonating frequencies i.e., 4.7 GHz, 6.8 GHz and 9.8 GHz having -10 dB return loss band width as 111.1 MHz, 245.1 MHz, 998.6 MHz respectively while measured resonating frequencies are observed as 4.75 GHz, 7.1 GHz and 10.2 GHz having -10 dB return loss band width as 539.1 MHz , 410.6 MHz , 2.0834 GHz respectively . The proposed antenna results are examined using High frequency structure simulator tool and then verified through measured results . Thus, the proposed antenna is applicable for frequency bands like S band, C band and X band .

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

scholarly journals A Square Patch with L and Inverted L shaped slotted AMC structure for Wi-Fi Applications

2020 ◽  
Vol 9 (1) ◽  
pp. 1722-1725
Keyword(s):  
Resonant Frequency ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Band Width ◽  
Magnetic Conductor ◽  
Radiation Characteristics ◽  
Artificial Magnetic Conductor ◽  
High Frequency Structure Simulator ◽  
Phase Reflection

To improve the antenna characteristics in terms of bandwidth, gain and its radiation characteristics without providing any phase reflections, Artificial Magnetic Conductor (AMC) are used in antenna designing. This paper initially designed AMC structure for 2.4GHz frequency. The proposed AMC structure consists of three L shaped and inverted L shaped slots and provides zero degrees phase reflection at 2.4GHz resonant frequency. This proposed AMC structure is incorporated on conventional micro strip square patch antenna and results are simulated in High Frequency Structure Simulator (HFSS) software. The Proposed AMC incorporated patch antenna, return loss is improved from -16.16dB to -31.75dB, VSWR is from 1.42 to 1.05, the band width is increased from 16.5 MHz to 348.1 MHz This design resonates at a frequency of 2.4GHz and applicable to Wi-Fi applications.

scholarly journals Design of CPW-Fed Antenna with Defected Substrate for Wideband Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Amar Sharma ◽  
Puneet Khanna ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Group Delay ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Good Agreement

A CPW-fed defected substrate microstrip antenna is proposed. The proposed antenna shows wideband applications by choosing suitable defected crown shaped substrate. Defected substrate also reduces the size of an antenna. The radiating patch of proposed antenna is taken in the form of extended U-shape. The space around the radiator is utilized by extending the ground plane on both sides of radiator. Simulation of proposed antenna is done on Ansoft’s High Frequency Structure Simulator (HFSS v. 14). Measured results are in good agreement with simulated results. The prototype is taken with dimensions 36 mm × 42 mm × 1.6 mm that achieves good return loss, constant group delay, and good radiation characteristics within the entire operating band from 4.5 to 13.5 GHz (9.0 GHz) with 100% impedance bandwidth at 9.0 GHz centre frequency. Thus, the proposed antenna is applicable for C and X band applications.

scholarly journals A Slotted Microstrip Antenna with Fractal Design for Surveillance Based Radar Applications in X- Band

2018 ◽  
Vol 7 (3.3) ◽  
pp. 64
Author(s):  
Shailendra Kumar Dhakad ◽  
Umesh Dwivedi ◽  
Sanyog Rawat ◽  
Yash Agarwal ◽  
Anay Joshi
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Antenna Design ◽  
Operating Characteristics ◽  
Design Elements ◽  
X Band ◽  
Final Design ◽  
Radar Applications

This paper proposes a unique micro-strip patch antenna which has a hexagonal fractal pattern which can mainly be used for ground based surveillance radar applications. To further optimize the functioning of the antenna, multiple slots have been added to the ground plane, and a stepped pattern has been implemented to increase the current density and the gain. A detailed study of the stages of development of the antenna has been made, illustrating the effect that various design elements have on the operating characteristics of the final design. There is specific emphasis on the use of slots in the ground plane. Variations in return loss, gain, VSWR, operating frequency and bandwidth with changes in the design of the ground plane have been documented. The antenna is designed to perform in the X-band, more specifically around 9 GHz, making it well suited for short range search. The final iteration of the antenna design, including various stages of slotting in the ground plane, works at 8.7 GHz, which is well within the X-band range, and has a return loss of around 30 dB.  

Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna

2013 ◽  
Vol 684 ◽  
pp. 303-306
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Impedance Matching ◽  
Feeding Method ◽  
High Frequency Structure Simulator ◽  
Feeding Methods ◽  
Coaxial Probe ◽  
Dimension Ratio

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

scholarly journals A Butterfly-Shaped Wideband Microstrip Patch Antenna for Wireless Communication

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Liling Sun ◽  
Maowei He ◽  
Jingtao Hu ◽  
Yunlong Zhu ◽  
Hanning Chen
Keyword(s):  
Wireless Communications ◽  
Wireless Communication ◽  
Radio Frequency Identification ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Rfid Systems ◽  
Microstrip Patch ◽  
Frequency Identification

A novel butterfly-shaped patch antenna for wireless communication is introduced in this paper. The antenna is designed for wideband wireless communications and radio-frequency identification (RFID) systems. Two symmetrical quasi-circular arms and two symmetrical round holes are incorporated into the patch of a microstrip antenna to expand its bandwidth. The diameter and position of the circular slots are optimized to achieve a wide bandwidth. The validity of the design concept is demonstrated by means of a prototype having a bandwidth of about 40.1%. The return loss of the butterfly-shaped antenna is greater than 10 dB between 4.15 and 6.36 GHz. The antenna can serve simultaneously most of the modern wireless communication standards.

scholarly journals A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Puneet Khanna ◽  
Amar Sharma ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Coplanar Waveguide ◽  
Network Analyzer ◽  
Large Space ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
Good Agreement

A coplanar waveguide- (CPW-) fed compact wideband defected structure shaped microstrip antenna is proposed for wireless applications. Defected structure is produced by cutting theUshape antenna in the form of two-sided T shape. The proposed antenna consists of two-sidedTshape strip as compared to usual monopole patch antenna for minimizing the height of the antenna. The large space around the radiator is fully utilized as the ground is on the same plane as of radiator. Microstrip line feed is used to excite the proposed antenna placed on an FR4 substrate (dielectric constantεr=4.4). The antenna is practically fabricated and simulated. Simulated results of the proposed antenna have been obtained by using Ansoft High-Frequency Structure Simulator (HFSS) software. These results are compared with measured results by using network analyzer. Measured result shows good agreement with the simulated results. It is observed that the proposed antenna shows a wideband from 2.96 GHz to 7.95 GHz with three bands atf1=3.23 GHz,f2=4.93 GHz, andf3=7.04 GHz.

scholarly journals Design of Wideband Antenna Array for WiMax Application

2021 ◽  
Vol 9 (8) ◽  
pp. 958-962
Author(s):  
Rakesh N
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
High Frequency ◽  
Return Loss ◽  
Flow Solver ◽  
Wideband Antenna ◽  
Circular Patch ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Circular Patch Antenna

Abstract: The evolution of wireless communication system has led path for innovative antenna design specifically in wideband antenna for WiMax application. In this paper design and simulation of microstrip wideband circular patch antenna array operating between 2GHz to 4Ghz is presented. The circular patch antenna is designed to operate at 3GHz line feed and the ground is itched to achieve required wideband characteristics. The simulation is carried out in EM Flow solver, High Frequency Structure Simulator software. For a single patch antenna, the return loss, lesser than -10dB throughout the bandwidth. Later an antenna array is operating between 2GHz to 4GHz frequency is designed and simulated. The return loss is lesser than -12dBi throughout the band and a peak gain is 14.7dBi. Keywords: Microstrip Patch Antenna (MPA), High Frequency Structure Simulator (HFSS).

Design and Analysis of Alphabetical Slots of Patch Antenna for Mobile Optical Communication at 60 GHz

2019 ◽  
Vol 0 (0) ◽  
Author(s):  
Ghanendra Kumar ◽  
Chakresh Kumar
Keyword(s):  
Wireless Communication ◽  
Optical Communication ◽  
Patch Antenna ◽  
High Frequency ◽  
High Speed ◽  
Slot Antenna ◽  
60 Ghz ◽  
High Frequency Structure Simulator ◽  
High Speed Data ◽  
Insulating Properties

AbstractIn the last decade, huge development has been seen in the field of wireless communication. The performance depends on the shape and size of the antenna. The future aim of wireless communication is to provide data with high speed data range even in harsh geographical areas. Here aim is to design and compare the E and H slot, T-slot, O-slot and U-slot antenna. The designed patch antenna operates at a frequency of 60 GHz with maximum antenna gain and minimum radiation loss using high frequency structure simulator (HFSS). We will use Rogers RT/duroid 5880 as substrate due to its suitable mechanical and insulating properties. Resonant frequency used will be 60 GHz and height will be 1.6 mm, 1.57 mm, 1.6 mm and 0.508 mm for E and H slot, T-slot, O-slot and U-slot, respectively.

scholarly journals E SHAPE MICROSTRIP PATCH ANTENNA WITH RECTANGULAR AND CIRCULAR SLOT

2020 ◽  
Vol 5 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Priyanka Jain ◽  
Raghavendra Sharma ◽  
Vandana Vikas Thakre
Keyword(s):  
Loss Tangent ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Antenna Design ◽  
Microstrip Patch ◽  
Rectangular Patch

In this proposed design a Rectangular E shaped micro-strip patch antenna is present with rectangular and circular slot within the Rectangular patch which operate at frequency 2.4 GHz. By proposed antenna design and coaxial feeding at suitable place  the resultant return loss, VSWR and bandwidth will be find out. For the propose microstrip antenna we have use FR-4 substrate which contain permittivity of 4.4 and thickness 1.5, loss tangent is 0.02. HFSS simulation software is used for designing and analysis.

Sign in / Sign up

Export Citation Format

Share Document