Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna

2013 ◽  
Vol 684 ◽  
pp. 303-306
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Impedance Matching ◽  
Feeding Method ◽  
High Frequency Structure Simulator ◽  
Feeding Methods ◽  
Coaxial Probe ◽  
Dimension Ratio

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

scholarly journals A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Puneet Khanna ◽  
Amar Sharma ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Coplanar Waveguide ◽  
Network Analyzer ◽  
Large Space ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
Good Agreement

A coplanar waveguide- (CPW-) fed compact wideband defected structure shaped microstrip antenna is proposed for wireless applications. Defected structure is produced by cutting theUshape antenna in the form of two-sided T shape. The proposed antenna consists of two-sidedTshape strip as compared to usual monopole patch antenna for minimizing the height of the antenna. The large space around the radiator is fully utilized as the ground is on the same plane as of radiator. Microstrip line feed is used to excite the proposed antenna placed on an FR4 substrate (dielectric constantεr=4.4). The antenna is practically fabricated and simulated. Simulated results of the proposed antenna have been obtained by using Ansoft High-Frequency Structure Simulator (HFSS) software. These results are compared with measured results by using network analyzer. Measured result shows good agreement with the simulated results. It is observed that the proposed antenna shows a wideband from 2.96 GHz to 7.95 GHz with three bands atf1=3.23 GHz,f2=4.93 GHz, andf3=7.04 GHz.

scholarly journals Low Profile Wideband Dual-Ring Slot Antenna for Biomedical Applications

2021 ◽  
Vol 19 ◽  
pp. 38-44
Author(s):  
Shilpee Patil ◽  
Vinod Kapse ◽  
Shruti Sharma ◽  
Anil Kumar Pandey
Keyword(s):  
High Frequency ◽  
Biomedical Applications ◽  
Return Loss ◽  
Impedance Matching ◽  
Slot Antenna ◽  
Great Flexibility ◽  
High Frequency Structure Simulator ◽  
Large Bandwidth ◽  
Low Profile ◽  
Dual Ring

In this study, a low-profile, co-planar waveguide (CPW) fed, wideband, and dual-ring slot antenna design for biomedical applications is proposed. The proposed antenna has a total area of 10 mm × 10 mm and a height of 0.4 mm, and is designed by using a thin and biocompatible FR4 epoxy (εr = 4.4) substrate to accomplish human body isolation and great flexibility obtained by implantation. This wideband antenna covers a large bandwidth of industrial scientific and medical (ISM) frequency band, including 902.8 MHz to 928 MHz, 1.395 GHz to 1.4 GHz, 1.427 GHz to 1.432 GHz, 2.4 GHz to 2.485 GHz, and above. The simulation results of return loss, voltage standing wave ratio (VSWR), impedance matching, gain, and radiation pattern of the proposed antenna are obtained through High Frequency Structure Simulator (HFSS) 14 software.

scholarly journals Effects of the Feedline Position on Microstrip Patch Antenna Performance

2021 ◽  
Vol 06 (12) ◽  
Author(s):  
Ali Recai Celik ◽  
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Line Position ◽  
High Frequency Structure Simulator ◽  
Feed Line ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Performance ◽  
Basic Characteristics

Abstract In this study, it is aimed to demonstrate the effects of the feed line position on the operating frequency, return loss and bandwidth of the rectangular patch microstrip antenna. For this purpose, a compact-sized antenna that can operate at 2.4-2.45 GHz frequencies is designed in High Frequency Structure Simulator (HFSS) program. Then, the position of the feedline is changed horizontally and vertically, and its effects are observed. The results obtained after the modificaions are given and discussed. It is stated that the feed line position is a very important parameter that affects the basic characteristics of the antenna.

scholarly journals Design of CPW-Fed Antenna with Defected Substrate for Wideband Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Amar Sharma ◽  
Puneet Khanna ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Group Delay ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Good Agreement

A CPW-fed defected substrate microstrip antenna is proposed. The proposed antenna shows wideband applications by choosing suitable defected crown shaped substrate. Defected substrate also reduces the size of an antenna. The radiating patch of proposed antenna is taken in the form of extended U-shape. The space around the radiator is utilized by extending the ground plane on both sides of radiator. Simulation of proposed antenna is done on Ansoft’s High Frequency Structure Simulator (HFSS v. 14). Measured results are in good agreement with simulated results. The prototype is taken with dimensions 36 mm × 42 mm × 1.6 mm that achieves good return loss, constant group delay, and good radiation characteristics within the entire operating band from 4.5 to 13.5 GHz (9.0 GHz) with 100% impedance bandwidth at 9.0 GHz centre frequency. Thus, the proposed antenna is applicable for C and X band applications.

scholarly journals Designing a Microstrip Patch Antenna in Part of Ultra-Wideband Applications

2020 ◽  
Vol 17 (4) ◽  
pp. 1216
Author(s):  
Wa'il A. Godaymi Al-Tumah ◽  
Raed Shaaban ◽  
Zeki Ahmed
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Frequency Range ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Rectangular Microstrip Antenna

In this work, a simulated study was carried out for designing a novel spiral rectangular patch of microstrip antenna that is used in ultra-wideband applications by using a high frequency structure simulator software (HFSS). A substrate with dielectric constant of 4.4 and height 2.10 mm (commercial substrate height available is about 0.8-1.575 mm) has been used for the design of the proposed antenna. The design basis for enhancing bandwidth in the frequency range 6.63 - 10.93 GHz is based on increasing the edge areas that positively affect the antenna's efficiency. This design makes the designed antenna cost less by reducing the area of the patch. It has been noticed that the bandwidth of the antenna under this study is increasing to 4.30 GHz or 61% compared with 3.6% for the standard rectangular microstrip antenna with the same dimensions of the proposed antenna. The antenna also maintains the voltage standing wave ratio of 1.09 at resonant frequency 7.07 GHz, return loss -27.07 dB, and the amount of impedance in real and imaginary parts 51.5Ω and 3.3Ω, respectively.

scholarly journals Inset Fed Horizontal Wide U-Shaped Slotted Microstrip Antenna for Multi-band Operation

2019 ◽  
Vol 8 (3) ◽  
pp. 6155-6159
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Antenna Design ◽  
Band Width ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Multi Band

A multi-band horizontal wide U-slotted patch antenna is proposed for wireless communication. Along with the horizontal wide U-slot, the proposed antenna also consists of four truncated corners along with inset feeding for proper antenna matching. The proposed antenna design has three distinct simulated resonating frequencies i.e., 4.7 GHz, 6.8 GHz and 9.8 GHz having -10 dB return loss band width as 111.1 MHz, 245.1 MHz, 998.6 MHz respectively while measured resonating frequencies are observed as 4.75 GHz, 7.1 GHz and 10.2 GHz having -10 dB return loss band width as 539.1 MHz , 410.6 MHz , 2.0834 GHz respectively . The proposed antenna results are examined using High frequency structure simulator tool and then verified through measured results . Thus, the proposed antenna is applicable for frequency bands like S band, C band and X band .

scholarly journals Circle Microstrip Antenna Simulation for Frequency 3.5 GHz

2021 ◽  
Vol 1 (1) ◽  
pp. 1-4
Author(s):  
Wildan Wildan ◽  
Dwi Astuti Cahyasiwi ◽  
Syah Alam ◽  
Mohd Azman Zakariya ◽  
Harry Ramza
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Tangent Loss ◽  
Substrate Thickness ◽  
Total Radiation ◽  
Circular Patch Antenna ◽  
Working Frequency

This research proposed microstrip circular patch antenna simulation at a working frequency 3500 MHz. The antenna has been designed using a Duroid RT5880 substrate with dielectric constant (εr) = 2.2, substrate thickness (h) = 1.575 mm, and tangent loss = 0.0009 with microstrip line feeding. The simulation result, return loss value obtained -26.385, VSWR value 1.09, gain value 7.64 dBi, total radiation efficiency value -0.6489 dB, and bandwidth value 72 MHz (3468.8 MHz – 3541.9 MHz).

scholarly journals Metamaterial extended CSRR based monopole antenna for wideband applications

2017 ◽  
Vol 7 (1.1) ◽  
pp. 461 ◽  
Author(s):  
Pronami Bora ◽  
Mona Mudaliar ◽  
Yuvraj Baburao Dhanade ◽  
K Sreelakshm ◽  
Chayan Paul ◽  
...  
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Impedance Matching ◽  
Monopole Antenna ◽  
High Frequency Structure Simulator ◽  
Rectangular Patch ◽  
Measurement Results ◽  
Defected Ground Structures ◽  
Ground Structures ◽  
Ku Band

A metamaterial extended microstrip rectangular patch antenna with CSRR loading and defected ground structures(DGS) is proposed for wideband applications with band notching at the frequencies of KU band. The proposed antenna is designed by embedding it on Rogers RT/Duroid 5880 substrate with good impedance matching of 50 Ω at the feedline.The high frequency structure simulator (HFSS) is used to design and simulate the antennas parameters in the operating band. Measurement results confirm the antenna characteristics as predicted in the simulation with a slight shift in frequencies.

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

Sign in / Sign up

Export Citation Format

Share Document