scholarly journals PERANCANGAN ALAT MAKAN DAN MINUM PADA PETERNAKAN AYAM PETELUR SECARA OTOMATIS BERBASIS MIKROKONTROLER

2019 ◽  
Vol 3 (2) ◽  
pp. 24-28
Author(s):  
Mayda Waruni Kasrani ◽  
Zulkaini Septia Rini ◽  
Anwar Fattah
Keyword(s):  
Production Process ◽  
Coming Out ◽  
Automatic System ◽  
Security System ◽  
Automated System ◽  
Automation System ◽  
Scheduling System

Abstract�Developments in the field of livestock some have not used technology in the process of feeding and drinking, the process is still using human. This system realizes Aduino Nano to control the entire automation system in the form of feeding and drinking, so that the production process runs effectively and efficiently. This system consists of giving a feed schedule and the amount of feed given to chickens every day for feeding consists of two feeders who do morning and evening. System to provide input to the process using an automated system. This process works after all inputs have been given, starting from the first, second and third types of feed coming out through the door which is opened using the principle of relay movement in accordance with the specified amount, the feed already in the mixing place will be stirred and calcified, then feed already mixed will be sent to each chicken coop evenly using an automatic system. The results of the system test can be concluded that the feed scheduling system specified by Arduino Nano can work with a level of success and the security system goes well when an error occurs. Communication that occurs between Arduino Nano and other components runs well. Intisari� Perkembangan pada bidang peternakan beberapa belum menggunakan teknologi dalam proses pemberian pakan dan minum, proses yang dilakukan masih menggunakan manusia. Sistem ini merealisasikan Arduino Nano untuk mengendalikan seluruh sistem automasi berupa pemberian pakan dan minum, agar proses produksi berjalan dengan efektif dan efisien. Sistem ini terdiri dari pemberian jadwal pakan dan jumlah pakan yang diberikan pada ayam setiap hari untuk pemberian pakan terdiri dari dua kali pemberi pakan yang di lakukan pagi dan sore hari. Sistem untuk memberikan input pada prosesnya menggunakan sistem otomatis. Proses ini bekerja setelah semua input telah diberikan, mulai dari jenis pakan pertama, kedua dan ketiga keluar melalui pintu yang dibuka menggunakan prinsip pergerakan relay sesuai dengan jumlah yang ditentukan, pakan yang sudah terdapat pada tempat pencampuran akan di aduk dan tercapur, kemudian pakan yang sudah tercampur akan di kirim ke setiap kandang ayam secara merata meggunakan sistem otomatis. Hasil pengujian sitem dapatdisimpulkan bahwa pada sistem penjadwalan pakan yang ditentukan oleh Arduino Nano dapat bekerja dengan tingkat keberhasilan serta sistem keamanan berjana dengan baik ketika terjadi error. Komunikasi yang terjadi antara Arduino Nano dengan komponen lainnya berjalan dengan baik

scholarly journals Limited Visibility Aware Motion Planning for Autonomous Valet Parking Using Reachable Set Estimation

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1520
Author(s):  
Seongjin Lee ◽  
Wonteak Lim ◽  
Myoungho Sunwoo ◽  
Kichun Jo
Keyword(s):  
Coming Out ◽  
Planning Process ◽  
Autonomous Driving ◽  
Field Of View ◽  
Automated System ◽  
Automation System ◽  
Worst Case ◽  
Parking Lot ◽  
Reachable Set Estimation ◽  
Limited Visibility

Autonomous driving helps drivers avoid paying attention to keeping to a lane or keeping a distance from the vehicle ahead. However, the autonomous driving is limited by the need to park upon the completion of driving. In this sense, automated valet parking (AVP) system is one of the promising technologies for enabling drivers to free themselves from the burden of parking. Nevertheless, the driver must continuously monitor the automated system in the current automation level. The main reason for monitoring the automation system is due to the limited sensor range and occlusions. For safety reasons, the current field of view must be taken into account, as well as to ensure comfort and to avoid unexpected and harsh reactions. Unfortunately, due to parked vehicles and structures, the field of view in a parking lot is not sufficient for considering new obstacles coming out of occluded areas. To solve this problem, we propose a method that estimates the risks for unobservable obstacles by considering worst-case assumptions. With this method, we can ensure to not act overcautiously while moving safe. As a result, the proposed method can be a proactive approach to consider the limited visibility encountered in a parking lot. In the proposed method, occlusion can be efficiently reflected in the planning process. The potential of the proposed method is evaluated in a variety of simulations.

scholarly journals Creation of an automated system for measuring technological parameters in the rubber production line

2019 ◽  
Vol 81 (3) ◽  
pp. 225-230
Author(s):  
V. S. Zhirkova ◽  
N. L. Kleymenova ◽  
O. P. Dvoryaninova ◽  
L. I. Nazina ◽  
S. V. Ershov
Keyword(s):  
Production Process ◽  
Technological Process ◽  
Production Line ◽  
High Performance ◽  
Automated System ◽  
Automation System ◽  
Rubber Compound ◽  
Technological Parameters ◽  
High Quality

The introduction of an automated control system on the production line of the rubber compound will reduce the influence of the human factor on the quality of rubber products, which will lead to a significant improvement in the operational and physico-mechanical characteristics of the final product. Also, the development of this system will create a centralized data collection system for creating reports on technological operations of the production process. To obtain high-quality products, it is necessary to control and maintain all technological parameters during equipment operation at the same level, modern means of registration and parameter management. In the production of rubber compounds, it is necessary to ensure a high degree of automation of the main technological equipment, which will make it possible to more accurately dose the ingredients, including dusting ones, to conduct the process in a given temperature regime for the time required to obtain high-quality products. The implementation of automatic control during the use of high-performance equipment is not possible without the use of measuring and control equipment. The article is devoted to the problem of automation of a system for measuring technological parameters on a rubber compound production line in order to improve the quality of manufactured products. The analysis of the technological process is carried out, the controlled parameters of not only the modes of the technological process, but also of raw materials, semi-finished products and finished products are selected. The choice of instruments and local automation equipment is presented, as well as the choice of an industrial microcontroller with which control is carried out at the lower level of an integrated automation system. A functional diagram of the automation of the rubber compound production process is proposed, which will allow to obtain a product with quality indicators corresponding to the regulated level.

IRISK METHOD FOR SECURITY ESTIMATION OF THE SIMULATION POLYGON FOR THE PROTECTION OF CRITICAL INFORMATION RESOURCES

2019 ◽  
Author(s):  
Bogdan Korniyenko ◽  
Lilia Galata
Keyword(s):  
Risk Assessment ◽  
Information System ◽  
Information Security ◽  
Risk Analysis ◽  
Information Resources ◽  
Security System ◽  
Assessment System ◽  
Automated System ◽  
Information Risk ◽  
Critical Information

In this article, the research of information system protection by ana­ ly­ zing the risks for identifying threats for information security is considered. Information risk analysis is periodically conducted to identify information security threats and test the information security system. Currently, various information risk analysis techni­ ques exist and are being used, the main difference being the quantitative or qualitative risk assessment scales. On the basis of the existing methods of testing and evaluation of the vulnerabilities for the automated system, their advantages and disadvantages, for the possibility of further comparison of the spent resources and the security of the information system, the conclusion was made regarding the deter­ mi­ nation of the optimal method of testing the information security system in the context of the simulated polygon for the protection of critical information resources. A simula­ tion ground for the protection of critical information resources based on GNS3 application software has been developed and implemented. Among the considered methods of testing and risk analysis of the automated system, the optimal iRisk methodology was identified for testing the information security system on the basis of the simulated. The quantitative method Risk for security estimation is considered. Generalized iRisk risk assessment is calculated taking into account the following parameters: Vulnerabili­ ty  — vulnerability assessment, Threat — threat assessment, Control — assessment of security measures. The methodology includes a common CVSS vul­ nerability assessment system, which allows you to use constantly relevant coefficients for the calculation of vulnerabilities, as well as have a list of all major vulnerabilities that are associated with all modern software products that can be used in the automated system. The known software and hardware vulnerabilities of the ground are considered and the resistance of the built network to specific threats by the iRisk method is calculated.

scholarly journals Home Automation with Intruder Detection and Energy Control

2021 ◽  
Vol 9 (VI) ◽  
pp. 3473-3480
Author(s):  
M. Niharika
Keyword(s):  
Light Intensity ◽  
Smart Home ◽  
Security System ◽  
Automation System ◽  
Home Automation ◽  
Energy Control ◽  
Intruder Detection ◽  
Alert Message ◽  
Home Automation System

In previous project we made a home automation system, where we can control our appliances through Blynk app and Google assistant with the help of IFTTT. As an extension we will provide feedback to user whether the appliance is on or off. We will also use sensors like LDR for measuring light intensity in this project to make it smart. We will also include security system where in we have sensors to doors and windows and give buzzer along with an alert message to the user. On a whole we will provide a smart home automation system.

scholarly journals ANALISA PERBANDINGAN PENJADWALAN PRODUKSI DENGAN METODE CDS (CAMPBELL DUDEK SMITH), EDD (EARLIEST DUE DATE) DAN FCFS (FIRST COME FIRST SERVE) PADA PT. SARI WARNA ASLI UNIT V

2021 ◽  
Vol 1 (2) ◽  
pp. 46-51
Author(s):  
Dwi Ayu Lestari, Vikha Indira Asri
Keyword(s):  
Production Process ◽  
Production System ◽  
Production Scheduling ◽  
Job Shop ◽  
Allocation Of Resources ◽  
Due Date ◽  
Scheduling System ◽  
Make To Order ◽  
First Come First Serve ◽  
Scheduling Method

Scheduling is defined as the process of sequencing the manufacture of a product as a whole on several machines. All industries need proper scheduling to manage the allocation of resources so that the production system can run quickly and precisely as of it can produce optimal product. PT. Sari Warna Asli Unit V is one of the companies that implements a make to order production system with the FCFS system. Thus, scheduling the production process at this company is also known as job shop production scheduling. The methods used in this research are the CDS method, the EDD method and the FCFS method. The purpose of this research is to minimize the production time and determine the best method that can be applied to the company. The results of this research showed that the makespan obtained in the company's scheduling system with FCFS rules was 458 minutes, and the results of scheduling using the CDS method obtained a makespan value of 329 minutes, then the best production scheduling method that had the smallest makespan value was the CDS method.

scholarly journals Automated Negative Lightning Return Strokes Classification System

2021 ◽  
Vol 2107 (1) ◽  
pp. 012022
Author(s):  
F. Abdul Haris ◽  
M.Z.A. Ab Kadir ◽  
S. Sudin ◽  
D. Johari ◽  
J. Jasni ◽  
...  
Keyword(s):  
Classification System ◽  
Automatic System ◽  
Human Error ◽  
Processing Time ◽  
Visual Inspection ◽  
Automated System ◽  
Graphic User Interface ◽  
Data Comparison ◽  
Good Agreement

Abstract Over the years, many studies have been conducted to measure and classify the lightning-generated electric field waveform for a better understanding of the lightning physics phenomenon. Through measurement and classification, the features of the negative lightning return strokes can be accessed and analysed. In most studies, the classification of negative lightning return strokes was performed using a conventional approach based on manual visual inspection. Nevertheless, this traditional method could compromise the accuracy of data analysis due to human error, which also required a longer processing time. Hence, this study developed an automated negative lightning return strokes classification system using MATLAB software. In this study, a total of 115 return strokes was recorded and classified automatically by using the developed system. The data comparison with the Tenaga Nasional Berhad Research (TNBR) lightning report showed a good agreement between the lightning signal detected from this study with those signals recorded from the report. Apart from that, the developed automated system was successfully classified the negative lightning return strokes which this parameter was also illustrated on Graphic User Interface (GUI). Thus, the proposed automatic system could offer a practical and reliable approach by reducing human error and the processing time while classifying the negative lightning return strokes.

scholarly journals Automated Class Scheduling System

2012 ◽  
Vol 9 (1) ◽  
Author(s):  
Jeralyn M. Gamale ◽  
Edward C. Anuta ◽  
Zina D. Sayson
Keyword(s):  
Automated System ◽  
Data Handling ◽  
State University ◽  
Scheduling System ◽  
School Year ◽  
Class Schedule ◽  
Island State ◽  
Class Scheduling ◽  
Speed Accuracy ◽  
Accuracy Data

The study tested the functionality of Automated Class Scheduling System in terms of speed, data handling, accuracy, security, stability and adaptability in making class schedules. This study was conducted in Bohol Island State University Main Campus, Tagbilaran City during the second semester of school year 2010-2011. The respondents of this study were the 6 expert instructors in the field of computer programming. They tested and evaluated the functionality of the program in terms of its design, accuracy, data handling, security, stability and adaptability. Another 8 instructors who are in charge of making class schedules determined the functionality of the system in terms of speed, accuracy, data handling, stability and adaptability of the software. Separate set of questionnaires were given to two groups of respondents. The study concluded that the manual and the automated class scheduling systems are both functional. However, the automated system is more functional because of its extra features which solve the primary problems in creating class schedules. Keywords - class scheduling system, scheduling software, automated class schedule

Automatic system for controlling the production process at the Priazov Mining Commission

Refractories ◽  
1973 ◽  
Vol 14 (7-8) ◽  
pp. 404-408
Author(s):  
A. N. Turenko ◽  
V. L. Yazev ◽  
R. T. Berezanskii ◽  
L. I. Chernoplechii ◽  
V. S. Polishchuk
Keyword(s):  
Production Process ◽  
Automatic System ◽  
Mining Commission

scholarly journals Electric Enabler

2017 ◽  
Vol 139 (12) ◽  
pp. 39-39
Author(s):  
John Kosowatz ◽  
Thomas Romer
Keyword(s):  
Production Process ◽  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Lithium Ion ◽  
Battery Pack ◽  
Automated System ◽  
Price Point ◽  
Battery Packs ◽  
Full Capacity ◽  
Safety Systems

This article explains how Tesla batteries are making electric vehicles (EVs) affordable for customers. Tesla’s battery revolution began when CEO Elon Musk declared that it would sell a mass-market EV for just $35,000. To produce battery packs cheaply enough to reach that price point, Tesla reengineered not only the production process, but also the factory in which the batteries are made. The Reno, Nev., Gigafactory is not yet operating at full capacity, but it is expected to produce 35 GW per year of lithium-ion batteries, about double the present-day global production. Tesla partnered with Panasonic to revamp the production process, and ended up redesigning the chemistry of the battery itself. The standard “18-650” cell format used thousands of less-expensive commodity cells, similar to lithium-ion batteries used in laptop computers. Tesla replaced individual safety systems built into each cell with an inexpensive fireproof system for the entire battery pack. Now, they have begun producing the new “2170” cell, which delivers higher density through an automated system developed with Panasonic to further reduce costs.

Sign in / Sign up

Export Citation Format

Share Document