Innovations in the field of blackout of military automotive vehicles

2021 ◽  
pp. 28-38
Author(s):  
Keyword(s):  
System Development ◽  
Light Signal ◽  
Fundamental Difference ◽  
Incandescent Lamp ◽  
Practical Implementation ◽  
Light Sources ◽  
Centralized Control ◽  
Regulatory Requirements ◽  
Led Light ◽  
Incandescent Lamps

The article presents the stages and results of the combined blackout system development for military automotive vehicles. The relevance of generation changing of devices based on the blackout attachments for lighting and light alarm devicesis due to the entry into force of new regulatory requirements. The problem is solved by integrating the well-known principles of blackout into the design of light-signal devices based on LED light sources. The article shows the fundamental difference in the approaches to substantiate the requirements for devices based on incandescent lamps and LEDs. The examples of practical implementation of the developed system are given. Keywords: lighting and light alarm devices, internal lighting, blackout system, blackout modes, centralized control, incandescent lamp, LED

Application of LED in Marine Fishery

2013 ◽  
Vol 765-767 ◽  
pp. 213-216
Author(s):  
Wen Qing Shi ◽  
Zheng Ye Xiong ◽  
Yong Qiang Li ◽  
Cun You Huang
Keyword(s):  
High Energy ◽  
Economic Benefits ◽  
Metal Halide ◽  
Light Sources ◽  
Market Demand ◽  
Led Light ◽  
Marine Fishery ◽  
Incandescent Lamps ◽  
Metal Halide Lamps ◽  
Chinese Marine

Aiming at the high energy-consuming characteristics of Chinese marine fishery, the application of LED in Chinese marine fishery is analyzed. It has remarkable energy-saving effect if the fishing style of trawling is replaced by light-seine fishing, and the gathering-fish lamps of metal halide lamps or incandescent lamps are replaced by LED light sources. The conversion of the trawlers to light-seine vessel and widespread use of LED light sources will lead to cut down energy consumption and increase the economic benefits. Based on rough calculation, it can make Chinese fisherfolk increase income about hundreds of millions of dollars and reduce more than millions of tons CO2 emission if the conversion of the trawlers to light-seine vessel and the replacement of metal halide lamps or incandescent lamps to LED light sources can reach 20% of all. Moreover, LED light source can use for general lighting purpose in marine fishery. All of these will cause the development of the correlative industries. For instance, the market demand of LED is very vast.

scholarly journals The light color quality of LED operating at winter temperatures

2019 ◽  
Vol 11 (4) ◽  
pp. 112 ◽  
Author(s):  
Przemysław Tabaka ◽  
Pawel Rozga
Keyword(s):  
Solid State ◽  
Operating Temperature ◽  
Solid State Lighting ◽  
Light Sources ◽  
Led Light ◽  
Fluorescent Lamps ◽  
Color Rendering ◽  
Incandescent Lamps ◽  
Colour Rendering

The paper presents the results of calculations of colorimetric parameters of LED sources operating at a temperature range from -25oC to 25oC. The chromaticity coordinates and color rendition quality parameters were calculated on the basis of registered spectral distributions of radiation. For individual LED chromaticity shift is illustrated at CIE 1931 x,y diagram with 3 step and 7 step MacAdam ellipses. Full Text: PDF ReferencesJ. P. Freyssinier, D. Frering, J. Taylor, N. Narendran, and P. Rizzo, Reducing lighting energy use in retail display windows. Sixth International Conference on Solid State Lighting, Proceedings of SPIE 6337, 63371L (2006). CrossRef Aman, M. M., et al., 2013. Analysis of the performance of domestic lighting lamps, Energy Policy, CrossRef E. Elijošiute, J. Balciukevičiute, G. Denafas, Life cycle assessment of; compact fluorescent and incandescent lamps: Comparative analysis. Environ Res. Eng. Manag. 61 (3), pp. 65-72, (2012), CrossRef D. Czyzewski, LED substitutes of conventional incandescent lamps Przeglad Elektrotechniczny R. 88, No. 11 (2012), CrossRef P. Tabaka, P. Rozga, Assessment of methods of marking LED sources with the power of equivalent light bulb, ulletin of the Polish Academy of Sciences. Technical Sciences, Vol. 65, No. 6, (2017) CrossRef I. Fryc, P. Jakubowski, K. Kołacz, Analysis of optical radiation parameters of compact discharge HID lamps and LED COB modules used for illuminating shop windows, Przeglad Elektrotechniczny,R. 93, No 11, (2017); pp. 186-189, CrossRef T. Kawabata, Y. Ohno; Optical measurements of OLED panels for lighting applications, pp 1176-1186 Jun 2013, Journal of Modern Optics, Vol. 60, 2013 Issue 14 CrossRef W. Żagan, Conditions necessary to replacing the conventional lamps by energy-saving lamps, Przeglad Elektrotechniczny R. 85, No. 5, pp. 100-104, (2009). DirectLink P. Tabaka; Influence of Ambient Temperature on Colour Properties of Low-Pressure Fluorescent Lamps, Light & Engineering, Vol. 23; No. 2; (2015). DirectLink W. R. Ryckaert, et al., Linear LED tubes versus fluorescent lamps: An evaluation. Energy Build. 49, pp. 429-436. CrossRef M. Zalesinska, J. Zablocka, K. Wandachowicz, Evaluation of Selected Parameters of Non-Directional Household Lamps, Conference: 2018 VII. Lighting Conference of the Visegrad Countries (Lumen V4), CrossRef I. Fryc; Measurement techniques of optical LEDs properties performed with compliance conformity with CIE 127:2007 standard, Przeglad Elektrotechniczny R. 85, No. 11, pp. 317-319, (2009) DirectLink IESNA, IES Approved Method: Measuring Lumen Maintenance of LED Light Sources. IES LM-80-08', IES Subcommittee on Solid-State Lighting of the IES Testing Procedures Committee (2018). DirectLink D. B. Judd, Estimation of chromaticity differences and nearest color temperature on the standard 1931 ICI colorimetric coordinate system. J. Opt. Soc. America 26 (11), 421, (1936) CrossRef CIE 177:2007 Colour Rendering of White LED Light Sources DirectLink CIE 13.3-1995 Method of Measuring and Specifying Colour. DirectLink CIE 224:2017 Colour Fidelity Index for accurate scientific use DirectLink CIE 15:2004 Colorimetry. DirectLink D. Mozysrska, M. Wyrwas, I. Fryc, The determination of the LEDs colorimetric parameters, in the range of their operating temperature, Przeglad Elektrotechniczny, R. 93, No. 4a, pp. 232-234, (2012). DirectLink J. Kowalska, Analysis of parameters describing the quality of the color rendering of light sources according to the IES TM-30-15 and the CIE 013.3-1995, Przeglad Elektrotechniczny, R. 93, No. 6; pp. 50-54, (2017) CrossRef J. Kowalska, I. Fryc, Colour rendition quality of typical fluorescent lamps determined by CIE Colour Fidelity Index and Colour Rendering Index, Przeglad Elektrotechniczny, R. 95, No. 7; (2019), pp. 94-97 CrossRef J. Kowalska, Ambiguity and limitations in determining the quality of the color rendering of light sources by index Ra (CIE CRI), Przeglad Elektrotechniczny, R. 93 No. 5, pp. 74-78, (2017) CrossRef I. Fryc, J. Fryc, A. Wasowski, Considerations about determining color rendering of light sources, Przeglad Elektrotechniczny, R. 92 No. 2, pp. 218-223, (2016) CrossRef I. Fryc, LED's spectral power distribution under different condition of operating temperature and driving current, Przeglad Elektrotechniczny, R. 86, No. 10, pp. 187-189, (2010). DirectLink A. David, P. Fini, K. Houser et al., Development of the IES method for evaluating the color rendition of light sources, Optics Express; Vol. 23; Issue 12, pp. 15888-15906, (2015). CrossRef K. Houser, M. Mossman, K. Smet et al, Tutorial, Color Rendering and Its Applications in Lighting, LEUKOS; Vol. 12, Issue 1-2; pp. 7-26; (2016). CrossRef

Design of Solar-Powered LED Road Lighting System

2019 ◽  
pp. 75-85
Author(s):  
Canan Perdahci ◽  
Hamdi Ozkan
Keyword(s):  
High Pressure ◽  
Renewable Energy Sources ◽  
Junction Temperature ◽  
Mercury Vapour ◽  
Light Sources ◽  
Street Lighting ◽  
Led Light ◽  
Road Lighting ◽  
Lighting Systems ◽  
High Pressure Sodium Lamp

Turkey is rich in terms of renewable energy sources and, therefore, is now encouraging the use of sustainable clean lighting systems in road applications. High pressure sodium lamp is the most widely used type in main roads, but other types of lamps such as mercury vapour lamps or metal halide lamps can be utilized for street lighting. Since it enables energy and money saving, LED light technology has replaced high pressure sodium lamps nowadays. Once solar power system (PV) is integrated with LED lamp for street lighting, the amount of saving and local impact might be enriched. LEDs used as light sources in road lighting luminaires with rising lumen values, decreasing junction temperature, higher colour rendering efficiency, longer lifetime have become more efficient than many light sources with the latest developments. Since the structure of the luminaires in which the LED light sources are used differs from that of the conventional light sources, the optical, thermal and electrical design of the LED luminaires must be considered differently. Thus, this study concentrates upon design considerations and the operating principle of solarpowered LED road lighting luminaire in details. Also, a simple solar panel system was designed and the economical values obtained at the end of 20 years were compared when using the ongrid system and the off-grid system.

scholarly journals Analysis on High-Power Seaport LED Luminaire with Uniform Light Distribution Based on Optimized Lens and Heatsink

2021 ◽  
Vol 11 (9) ◽  
pp. 4035
Author(s):  
Jinsheon Kim ◽  
Jeungmo Kang ◽  
Woojin Jang
Keyword(s):  
Light Source ◽  
High Power ◽  
Heat Dissipation ◽  
Light Emitting Diode ◽  
Light Distribution ◽  
Light Sources ◽  
Led Light ◽  
High Power Led ◽  
Distribution Requirement ◽  
Lighting Application

In the case of light-emitting diode (LED) seaport luminaires, they should be designed in consideration of glare, average illuminance, and overall uniformity. Although it is possible to implement light distribution through auxiliary devices such as reflectors, it means increasing the weight and size of the luminaire, which reduces the feasibility. Considering the special environment of seaport luminaires, which are installed at a height of 30 m or more, it is necessary to reduce the weight of the device, facilitate replacement, and secure a light source with a long life. In this paper, an optimized lens design was investigated to provide uniform light distribution to meet the requirement in the seaport lighting application. Four types of lens were designed and fabricated to verify the uniform light distribution requirement for the seaport lighting application. Using numerical analysis, we optimized the lens that provides the required minimum overall uniformity for the seaport lighting application. A theoretical analysis for the heatsink structure and shape were conducted to reduce the heat from the high-power LED light sources up to 250 W. As a result of these analyses on the heat dissipation characteristics of the high-power LED light source used in the LED seaport luminaire, the heatsink with hexagonal-shape fins shows the best heat dissipation effect. Finally, a prototype LED seaport luminaire with an optimized lens and heat sink was fabricated and tested in a real seaport environment. The light distribution characteristics of this prototype LED seaport luminaire were compared with a commercial high-pressure sodium luminaire and metal halide luminaire.

scholarly journals An Efficient Method for LED Light Sources Characterization

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1089 ◽  
Author(s):  
Sara Raggiunto ◽  
Alberto Belli ◽  
Lorenzo Palma ◽  
Piergiovanni Ceregioli ◽  
Massimo Gattari ◽  
...  
Keyword(s):  
Efficient Method ◽  
Least Squares Method ◽  
Color Temperature ◽  
Experimental Setup ◽  
Light Sources ◽  
Careful Study ◽  
Source Characterization ◽  
Led Light ◽  
Lighting Systems ◽  
Led Drivers

Digital LED drivers capable of blending the spectrum of two LED fixtures with different Correlated Color Temperatures through the LEDs’ power supply control are widespread. However, the digital control of lighting systems is possible only after a careful study of the LED’s response, in terms of illuminance and Correlated Color Temperature. The proposed work takes advantage of the Tunable White technology for the realization of an efficient method for LED light source characterization. In order to evaluate how the light changes as a function of the electric power supplied by the LED drivers, an experimental setup to characterize LED light sources has been designed. Starting from the data acquired from the experimental setup, a model for dimming the LED driver and obtaining the desired values of quality of light has been developed. The proposed model is based on the least squares method and its accuracy is evaluated by comparing the obtained values of illuminance and Correlated Color Temperature with those measured by an illuminance spectrophotometer. Results achieved an error of 0.3% for Correlated Color Temperature and 1.5% for illuminance using the proposed approximation functions.

A freeform optics design with limited data for extended LED light sources

2016 ◽  
Vol 63 (21) ◽  
pp. 2151-2158 ◽  
Author(s):  
Zhenfeng Zhuang ◽  
Phil Surman ◽  
Feihong Yu
Keyword(s):  
Light Sources ◽  
Limited Data ◽  
Led Light ◽  
Freeform Optics ◽  
Optics Design
Sign in / Sign up

Export Citation Format

Share Document