PENGARUH JENIS MULSA DAN PUPUK GANDASIL-B TERHADAP PERTUMBUHAN DAN HASIL TANAMAN CABAI RAWIT (Capsium frustescens L.) PADA TANAH GAMBUT PEDALAMAN (The Effect of Mulch Type and Gandasil-B Fertilizer on The Growth and Yield of Chili Pepper (Capsicum fr

AgriPeat ◽  
2019 ◽  
Vol 18 (01) ◽  
pp. 1-9
Author(s):  
Admin Journal
Keyword(s):  
Block Design ◽  
Peat Soil ◽  
Chili Pepper ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Randomized Block Design ◽  
Different Types ◽  
Split Plot ◽  
Main Plot ◽  
Black Plastic

                                                                                                                                       ABSTRACTThis research was aimed to investigate the effect of mulch type and gandasil-B fertilizer on the growth and yield of chili pepper (Capsicum frutescens L.) on inland peat soil. The method used in this research was two-factor Randomized Block Design with split plot arrangement and three replications. The main plot was the mulch type which consists of three treatments, namely: control, cogon grass and silver-black plastic mulch, and as sub plot was the dose of gandasil-B which consists of four 4 levels, namely: 0, 1, 2, and 3 g L-1 water. Results showed that the interaction between different types of mulch and gandasil-B fertilizer only had significant effect on the diameter of the stem, the number of productive branch, the number of fruit per plant, and the weight of fruit per plant. The utilization of silver-black plastic mulch and gandasil- B fertilizer at the concentration of 3 g L-1 water showed more number of productive branch (14.00 branches) and number of fruit (151.17 fruits) per plant and the weight of fruit (166.52 g) per plant was significantly higher.Keywords : Mulch, cogon grass, silver-black plastic, Gandasil-B, inland peat soil                                                                                                                                       ABSTRAKPenelitian ini bertujuan untuk mengetahui pengaruh jenis mulsa dan pupuk gandasil-B terhadap pertumbuhan dan hasil tanaman cabai rawit (Capsicum fruestescens L.) pada tanah gambut pedalaman. Percobaan ini menggunaakan Rancangan Acak Kelompok (RAK) disusun secara split plot dengan dua faktor perlakuan dan tiga ulangan. Sebagai petak utama, yaitu jenis mulsa terdiri dari tiga jenis, yaitu : kontrol, mulsa alang-alang dan mulsa plastik hitam perak. Sebagai anak petak adalah dosis pupuk Gandasil-B terdiri dari 4 taraf perlakuan, yaitu : 0, 1, 2 dan 3 g L-1 air. Hasil penelitian menunjukkan bahwa interaksi penggunaan jenis mulsa dengan pupuk gandasil-B hanya berpengaruh nyata terhadap diameter batang, jumlah cabang produktif, jumlah buah per tanaman dan berat buah per tanaman. Penggunaan mulsa plastik hitam perak dan pupuk gandasil-B 3 g L-1 air diperoleh jumlah cabang produktif (14.00 cabang) dan jumlah buah (151.17 buah) per tanaman) nyata lebih banyak dan berat buah (166.52 g) per tanaman nyata lebih tinggi.Kata kunci : Mulsa, alang-alang, plastik hitam perak, pupuk gandasil-B, gambut pedalaman

scholarly journals Incidence of the shading, bioregulators and biostimulant on the growth and yield of Mombaza grass (Panicum maximum Jacq.)

2021 ◽  
Vol 38 (2) ◽  
pp. 382-403
Author(s):  
Leonardo Jácome-Gómez ◽  
Maribel Ramírez-Villalobos
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Growth And Yield ◽  
Panicum Maximum ◽  
Dry Matter Yield ◽  
Minimum Dose ◽  
Solar Exposure ◽  
Randomized Block Design ◽  
Split Plot ◽  
Main Plot

Shading (S), bioregulators (BR) and biostimulants (BS) techniques are alternatives that promote sprouting and production of grass. The objective was to evaluate the effect of S, BR and BSt on the growth and yield of Mombaza grass in Ecuador. A complete randomized block design, with split plot arrangement and three replications, was used, the main plot represented by condition S (S1: full solar exposure, S2: shade of trees) and secondary one by BR and BS application (A0: control; A1: minimum doses of BR, 250 mL.ha-1 Cytokin + 10 g.ha-1 New Gibb 10 %; A2: maximum doses of BR, 500 mL.ha-1 Cytokin + 20 g.ha-1 New Gibb 10 %; A3: commercial dose of BS Algamar, seaweed, 750 g.ha-1). Three cuts of grass were made, 35 days after staring experiment; in each one, tiller height (TH), number of tillersm-2 (NTM) and stemstiller-1 (NST), and dry matter yield (DMY) were evaluated. It is found effects (P<0.05) of S on the four variables in each cut; and application of BR and BS on TH in cuts 1, period of least precipitation. It is concluded that the grass cultivated in S1 increased the growth and DMY in cuts 1, 2 and 3 (0.180, 0.300 y 0.398 kg.m-2). NTM was stimulated with S2 and TH with the minimum dose of BR.

scholarly journals DAMPAK APLIKASI MULSA DAN GENERASI UMBI BIBIT (G2, G3, LOKAL) PADA TANAMAN KENTANG (Solanum tuberosum LINN)

BUANA SAINS ◽  
2018 ◽  
Vol 17 (2) ◽  
pp. 153
Author(s):  
Ester Ruchama Jella ◽  
Agus Suryanto ◽  
Lilik Setyobudi
Keyword(s):  
Seed Tuber ◽  
Block Design ◽  
Growth And Yield ◽  
Potato Tubers ◽  
Plastic Mulch ◽  
Local Data ◽  
Seed Tubers ◽  
Randomized Block Design ◽  
Black Plastic ◽  
The Impact

Sub-optimal environment condition and the use of low-quality seed tubers is a constraint to increase the yield of potato tubers. The purpose of this study was to determine the impact of the various applications of mulch and seed tuber G2, G3, local on growth and yield of potato tubers, as well as to temperature and soil moisture. The research was conducted in June-December, 2013 in the highlands (2232.66 m asl) in Village Ranupani, District Senduro, Lumajang, East Java Province. A randomized block design was used with a combination of treatments: without mulch (tm), black plastic mulch silver (mphp), blue plastic mulch (mpb), Chromolaena odorata mulch (mCo) and the mother bulb G2, G3, local. There are 12 combinations of treatment was repeated 3 times. The combination of these treatments consist of: tm+G2, mphp+G2, mpb+G2, mCo+G2, tm+G3, mphp+G3, mpb+G3, mCo+G3, tm+local, mphp+local, mpb+local, mCo+local. Data were analyzed using the F test with a level of 5%. If a significantly different among treatment followed by LSD test 5%. The results showed the use mphp on local seed tubers are able to provide growth and potato tubers yield optimum is 641.76 g plant-1 ( 21.39 t ha-1) compared to other treatments, but the tuber yield did not differ significantly with the use mpb in seed tubers G2.

scholarly journals Weed Control in Tomato through Mulching Approaches

2021 ◽  
pp. 1-6
Author(s):  
Zabihullah Rahmani ◽  
Shah Mahmoud Faqiri ◽  
Ahmad Jawid Muradi
Keyword(s):  
Weed Control ◽  
Block Design ◽  
Barley Straw ◽  
Control Treatment ◽  
Plastic Mulch ◽  
Transparent Plastic ◽  
Randomized Block Design ◽  
Different Types ◽  
Black Plastic ◽  
And Control

The objective of this study is to evaluate effect of different types of mulches on weed control and yield of tomato in the farm of Agriculture, Livestock and Irrigation Department were conducted in the year 2019. The method for study is completely randomized block design with three replications and four treatments such as transparent plastic, black plastic, barley straw and control (without mulch). According to the study, the control treatment, black plastic mulches were a significant effect on the number of weeds and yield of tomatoes. The maximum yields were 48.05 (ton/ha) in black plastic and the minimum yields were 19 (ton/ha) in control mulch. The present work suggests that the application of different types of mulches can be an effective method to reduce the number of weeds in a tomato farm. The black plastic mulch is recommended due to increase in the yield of tomato and also an effective practice on controlling the weeds.

scholarly journals Efficacy of Herbicides for Weed Control in Cauliflower (Brassica oleracea var. botrytis L.)

2021 ◽  
pp. 199-204
Author(s):  
K. Choube ◽  
D. K. Raidas ◽  
M. L. Jadav ◽  
N. S. Kirar
Keyword(s):  
Weed Control ◽  
Weed Management ◽  
Management Practices ◽  
Block Design ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Net Return ◽  
Randomized Block Design ◽  
Black Plastic ◽  
Hand Weeding

A field experiment was conducted during Rabi, 2018-19 at Horticulture farm, RAK College of Agriculture, Sehore (M.P.) to study the effect of different weed management practices on growth and yield of cauliflower. The treatments namely - T1- Weedy check (control), T2- Weed free (through hand weeding) at 30 & 60 DAT, T3 -Pendimethalin 30% EC (PE) + one hand weeding at 30 DAT, T4 Oxyfluorfen 23.5% EC (PE) + one hand weeding at 30 DAT, T5 - Propaquizafop 10% EC (POE) + one hand weeding at 60 DAT, T6 -Wheat straw mulch 5kg/plot, T7- Black plastic mulch (150 mm) were evaluated in randomized block design with three replications. Results indicated that the there was no weed under T7 -black plastic mulch (150 mm) at all the stages. The maximum weed control efficiency (98%) was found with the treatment T7 - black plastic mulch (150 mm) at all the stages i.e. at 30, 60 and 90 DAT. The minimum weed index (0.00, 0.00 and 0.00%) was found with the treatment T7 (Black plastic mulch (150 mm) at all the stages. The maximum curd length, curd width, total curd weight (g) and curd yield (q ha-1) was recorded T7- black plastic mulch (150 mm) with the maximum net return (Rs. 75772.58 per ha).While the lowest net return was found under T1 (Weedy check) (Rs. 21405.34 per ha) treatment. The maximum B: C ratio (1:4.0) was recorded in case of treatment T3 [Pendimethalin 30% EC (PE) + 1HW at 30 DAT].

Effect of Irrigation Methods and Mulching on Growth and Seed Yield of Semialata

2020 ◽  
Vol 7 (01) ◽  
Author(s):  
SK SRIVASTAVA ◽  
PAWAN JEET
Keyword(s):  
Seed Yield ◽  
Drip Irrigation ◽  
Growth Parameters ◽  
Block Design ◽  
Water Requirement ◽  
Furrow Irrigation ◽  
Plastic Mulch ◽  
Randomized Block Design ◽  
Daily Water ◽  
Black Plastic

A study was conducted to assess the effect of drip irrigation and plastic mulch on growth and seed yield of Semialata. Two types of plastic mulch (green and silver/black) were tested at three levels of irrigation (120%, 100% and 80%) by drip irrigation and one level (100%) by furrow irrigation. The daily water requirement of Semialata was estimated by the equation ETcrop= ETox crop factor. ETcrop is crop water requirement mm/day. ETo (reference evapotranspiration, mm/day) was calculated by FAO calculator which uses temperature and humidity data. In this experiments there were twelve treatments were considered. The treatments were replicated thrice. The experiment was laid in randomized block design. It was observed that drip irrigation with or without plastic mulch is yielding better results in terms of growth parameters and seed yield as compared to furrow irrigation without plastic mulch. It was also observed that maximum suppression (67.58%) of weeds resulted with drip irrigation and silver/black plastic mulch at 80% level of irrigation.

scholarly journals Pertumbuhan dan Produksi Dioscorea sansibarensis Pax pada Perlakuan Panjang lanjaran dan Waktu Batang Membelit*

2018 ◽  
Vol 45 (3) ◽  
pp. 249
Author(s):  
Solikin ,
Keyword(s):  
Block Design ◽  
Soil Surface ◽  
Dry Weight ◽  
Growth And Yield ◽  
Botanic Garden ◽  
Randomized Block Design ◽  
Two Factors ◽  
Main Plot ◽  
Total Plant ◽  
Total Dry Weight

Dioscorea is potentially used as staple food to support food security. The research was aimed to determine the effect of stake length and time of  stem twining  on  the growth of Dioscorea sansibarensis Pax. The experiment was conducted  in  Purwodadi Botanic Garden from December 2014 until May 2015 using split plot randomized block design consisted of two factors, i.e. the stake length and time of stem twining. The stake length was the main plot consisted of 150 cm, 100 cm and 50 cm above soil surface and without stake (control). The time of stem twining as subplots, i.e. stem twined early, twined at the time of 4 leaves stage, and twined at 8 leaves stage. Each combination of the treatments was replicated three times. The results showed that there was significant effect on the stake length  and the time of stem twining treatments on the plant growth and yield. The stake  length of 150 cm treatment produced the highest fresh tuber and total plant dry weight, i.e., 257.24 g and 132.77 g per plant, respectively. On the contrary, the plant without stake produced the lowest fresh tuber and  total dry weight of plant, i.e., 112.10 g and 48.65 g per plant, respectively.<br /><br />Keywords: biomass,leaf area, photosyntesis, tuber weight

scholarly journals Effects of Cover Methods and Nitrogen Levels on the Growth and Yield of Tomato

2021 ◽  
Vol 4 (2) ◽  
pp. 1021-1033
Author(s):  
Nguyen Thi Loan ◽  
Tran Thi My Can
Keyword(s):  
Yield Components ◽  
Field Experiments ◽  
Block Design ◽  
Tomato Fruit ◽  
Dry Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Yield Attributes ◽  
Black Plastic

To study the effects of cover methods and nitrogen (N) levels on the growth and yield components of tomato Cv. Pear F1, field experiments with a 4x3 factorial design were conducted in the 2019 spring and winter seasons using a randomized complete block design with three replications. The cover methods included four treatments: bare soil (BS), black plastic mulch (BPM), transparent polypropylene row cover (RC), and a combination of BPM and RC (BPMRC) with the RC removed approximately 30 days after transplanting. Nitrogen (N) was applied at three levels (150, 180, and 210 kg N ha-1). Using BPM and RC generally led to an increased air temperature, air humidity, soil moisture, and soil temperature compared to the BS treatment. Higher N rates (180 and 210 kg N ha-1) did not result  in different tomato fruit sizes and fruit weights but positively increased fruit yield and quality (Brix values and fruit dry weight) as compared to the 150 kg N ha-1 addition. The cover methods positively affected the yield components and fruit yield of tomato as well as the fruit characteristics compared to the BS treatment. Using cover materials (BPM and RC) combined with a higher N application significantly increased the yield attributes and fruit yield. The highest fruit yield was achieved under the mulching treatment by black plastic (BPM treatment) combined with a 210 kg N ha-1 application, resulting in 50.90 tons ha-1 in the spring and 58.27 tons ha-1 in the winter.

scholarly journals PENGARUH JARAK TANAM DAN MULSA TERHADAP PERTUMBUHAN DAN HASIL TANAMAN TOMAT (Lycopersicon esculentum Mill) PADA MUSIM PENGHUJAN

2018 ◽  
Vol 11 (2) ◽  
pp. 1-9
Author(s):  
Amelia Nur Suprianto ◽  
Tri Kurniastuti
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Plastic Mulch ◽  
Tomato Plants ◽  
Straw Mulch ◽  
Randomized Block Design ◽  
Number Of Branches

This research aims 1) To determine the effect of interaction of different plant spacing and the provision of mulch to growth and yield of tomato plants. 2) To know the different spacing affect the growth and yield of tomato plants. 3) To know the use of mulch type effect on growth and yield of tomato plants. This research was conducted by using Randomized Block Design in Factorial (RAK) with 2 factors, first factor is plant spacing (J) consisting of 3 levels ie 40x30 cm (J1), 40x50 cm (J2), 40x70 cm (J3) . The second factor is mulch (M) consisting of 3 levels ie: without mulch (M0 / control), straw mulch (M1), plastic mulch (M2). The variables observed were plant height, number of branches, number of bunches, number of fruit, and fruit weight. Data were analyzed by using variance analysis (Anova), 5% level. The results showed that: There was no interaction between plant spacing and mulch on growth and yield of tomato plants. Treatment spacing 40x50 (J2) effect on the number of bunches of 35 HST, the weight of the first harvest fruit and total fruit weight. The use of straw mulch type (M1) has an effect on plant height, number of branches, number of 35 HST bunches, and total fruit weight.

scholarly journals Effect of organic inputs and mulching on growth and yield of roselle (Hibiscus sabdariffavar. sabdariffa)

2021 ◽  
Vol 23 (2) ◽  
pp. 219-222
Author(s):  
S BHARADHI ◽  
Keyword(s):  
Block Design ◽  
Poultry Manure ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Organic Manures ◽  
Combined Application ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Four Levels ◽  
Number Of Branches

A field experiment was carried out on a farmer’s field at Kannitamilnadu village in Cuddalore district, Tamilnadu during 2018 to find out the suitable organic inputs and pattern of mulching for better growth and yield of roselle (Hibiscus sabdariffavar. sabdariffa). The experiment was laid out in a factorial randomized block design with five levels of organic manures and four levels of mulching with three replication.. Best of the interaction effect was due to the combined application of 25 t FYM + 3 t poultry manure ha-1+ plastic mulch (M3S2) which recorded the highest values for all growth and yield parameters viz., plant height (228.3 cm), number of branches (14.5), leaf area (308.9 cm2), number of calcyes/plant (33.5), calyx yield/plant (233.9 g) and calyx yield/ha (6568.75 kg). The lowest values of these parameters were recorded under control (no organics and no mulching) treatment

scholarly journals Manually Feed NPK Fertigation Improves Growth and Yield of Chili Pepper Hybrids in Ultisol

Akta Agrosia ◽  
2020 ◽  
Vol 23 (1) ◽  
pp. 19-26
Author(s):  
Catur Herison ◽  
Rustikawati Rustikawati ◽  
Hasanudin Hasanudin ◽  
Usman K.J. Suharjo ◽  
Merakati Handajaningsih ◽  
...  
Keyword(s):  
Block Design ◽  
Fertilizer Application ◽  
Chili Pepper ◽  
Growth And Yield ◽  
Plastic Mulch ◽  
Dry Land ◽  
Randomized Complete Block Design ◽  
Npk Fertilizer ◽  
Hybrid Cultivar ◽  
Planting Season

Extending the planting area to a less-fertile soil, such as Ultisols, become inevitable choice to increase the national chili pepper production in Indonesia as this types of soil is the largest part of dry land of Indonesia, about 29.7% or around 51 million ha.  However, efforts to increase its productivity by providing sufficient fertilizers application is most frequently inefficient because in the conventional fertilizer applications, broadcasted fertilizer on the soil bed, are not readily available for the plant as their solubility is limited under the plastic mulch and still in the form of granular until the end of planting season.  Fertigation, therefore, maybe the answer for this problem.  The objective of this study was to determine the best NPK fertigation method on four chili pepper hybrids.  The experiment was conducted in a randomized complete block design with three replication, and the treatments were arranged in a split plot design.  As the main plots were NPK fertigation intensity, i.e. 100%, 75%, 50%, 25% and 0% fertigation with the remnant fertilizers were circularly broadcasted surrounding the plant.  As the subplots were chili pepper hybrids, i.e. ‘Maxima’, H39, H14, and ‘UNIB CHR17’.  The results showed that there was no interaction effect of fertigation intensity indicated that all hybrid genotypes showed similar pattern of responses.  The H39 hybrid had better vegetative growth compared to other hybrids in term of plant height, dichotomous height, stem diameter, number of branches, plant fresh-weight.  Whereas the hybrid cultivar ‘Maxima’ showed the highest yield followed by H14 and cultivar ‘UNIB CHR17’.  The 100% fertigation was the best method of NPK fertilizer application for chili pepper in Ultisols.keywowrd: fertigation, chili pepper, fertilizer application, acidic soil

Sign in / Sign up

Export Citation Format

Share Document