scholarly journals Effect of Potassium Carbonate (K2CO3) on the Viscosity and Related Physico – Chemical Properties of Genger (Bombax costatum) Powder during Storage

2013 ◽  
Vol 1 (1) ◽  
pp. 77-82 ◽  
Author(s):  
D Gernah ◽  
P Gbakaan
Keyword(s):  
Water Absorption ◽  
Potassium Carbonate ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Gel Strength ◽  
Water Absorption Capacity ◽  
Fresh Sample ◽  
Plastic Container ◽  
Physico Chemical ◽  
Gelation Concentration

Effect of storage and concentration of potassium carbonate (K2CO3) on the viscosity and related physico – chemical properties of genger (Bombax costatum) powder was determined. Genger powder was stored for a period of four (4) months (May-August) at 30oc ± 5oc under varying concentrations of K2CO3: 0%, 5%, 10% and 15% in two containers (plastic, giving samples A – D and metal tins, giving samples A1 – D1). Thereafter, the moisture and crude fat contents, water absorption capacity, least gelation concentration, effect of K2CO3 concentration on gel strength and viscosity of the stored powders were determined, using standard methods of analysis, with fresh powder (analyzed before storage) as control. Moisture content decreased significantly (p < 0.05) from 8.37% to 3.04% and 2.00% in samples D and D1 respectively, while crude fat content increased significantly (p < 0.05) from 2.50% to 7.50% and 10.05% in the same samples. Water absorption capacity also increased significantly (p < 0.05) from 6.4g/g to 6.40g/g in the fresh sample to 7.30g/g and 8.30g/g in samples D and D1 respectively. Gelation capacity increased considerably, with 15% K2CO3 giving very strong gels at 1.50% concentration. The overall viscosity increased significantly (p < 0.05) with increase in concentration of (K2CO3) from 64.00FN to 110.00FN after storage. Generally, samples stored in metal tin gave better results than those in the plastic container.

scholarly journals Physico-Chemical Properties of Biscuits Enriched with Dried Microwave-Blanched Fruit Peelings

2021 ◽  
pp. 1-11
Author(s):  
Feumba Dibanda Romelle ◽  
Panyoo Akdowa Emmanuel ◽  
Tiencheu Bernard ◽  
Aswhini Rani ◽  
Mbofung Carl Moses
Keyword(s):  
Water Absorption ◽  
Wheat Flour ◽  
Antioxidant Activities ◽  
Antioxidant Properties ◽  
Chemical Properties ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Physico Chemical ◽  
Apple Peels

Aims: To investigate the dough rheological properties as well as physical, nutritional, antioxidant and sensory properties of biscuits supplemented   with dried microwave-blanched orange, apple and pomegranate peels at various levels (0-10%, wheat flour substitution). Methodology: Water absorption capacity and pasting properties of wheat flour blended with   fruit   peels   were   assessed   using   farinograph   and   micro   viscoamylograph. Physico-chemical properties as well as antioxidant activities were measured using standard methods. The sensory analysis was performed by trained panelists. Results: Water absorption capacity of the dough increased significantly with increasing levels of orange and apple peels while it decreased with pomegranate peels. However, peak,  hot  paste,  cold  paste  and  breakdown  viscosities  of  the  dough  significantly decreased with increasing proportions of apple and orange peels while they increased with pomegranate peels. The breaking force and weight of the biscuits supplemented with pomegranate peels were the lowest.  Supplementation of biscuits with fruit peelings enhanced the ash and fibre content of the biscuits but had no significant effect on their antioxidant activities except for biscuits containing 10% apple peels which had higher antioxidant activity compared to biscuit controls. Biscuits supplemented with 5% of fruit peels were the most appreciated in terms of surface character, crumb colour and texture. Conclusion:  This study showed that dried microwave-blanched apple peels can be incorporated into biscuits to enhance both their nutritional and antioxidant properties.

The effect of sugar beet fiber addition on the chemical properties of tortilla chips

2012 ◽  
pp. 385-388 ◽  
Author(s):  
Azadeh Saadatmandi ◽  
Mohammad Elahi ◽  
Reza Farhoosh ◽  
Mahdi Karimi
Keyword(s):  
Sugar Beet ◽  
Water Absorption ◽  
Protein Content ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Ash Content ◽  
Oil Absorption ◽  
Water Absorption Capacity ◽  
Overall Acceptability ◽  
Tortilla Chips

The incorporation of sugar beet fiber (0–5%) to tortilla chips and the effects on the chemical and sensory properties were studied. Addition of sugar beet fiber (SBF) led to an increasing of water absorption capacity, ash content and darkness while lowering the protein content and oil absorption. Sensory evaluation showed that the overall acceptability of tortilla chips reduces if adding more than 2% SBF.

scholarly journals Pasting Properties of Composite Flour Made from Sorghum, Millet and African Yam Bean

2021 ◽  
pp. 23-35
Author(s):  
J. N. Okafor ◽  
J. N. Ishiwu ◽  
J. E. Obiegbuna
Keyword(s):  
Water Absorption ◽  
Bulk Density ◽  
Pasting Properties ◽  
Absorption Capacity ◽  
Composite Flour ◽  
Water Absorption Capacity ◽  
African Yam Bean ◽  
Composite Flours ◽  
Gelation Concentration ◽  
Flour Blends

The aim of this research was to produce acceptable ‘fufu’ from a mixture of sorghum, millet, and African yam bean flours that will have a moderate carbohydrate and protein content with most optimized texture. The functional and sensory properties of flour blends produced from Sorghum, Millet and African yam bean was studied. Sorghum, Millet and African yam bean were processed into flour and mixed at different ratios to obtain composite flours. The flour formulations obtained were analyzed for water absorption capacity, bulk density, least gelation concentration , and viscosity .The  water absorption capacity ranged from 1.00 to 3.00,  the bulk density ranged from 0.56 to 0.82;the least gelation concentration ranged from 5.77 to 6.87,while the viscosity ranged from 0.956 to 9.30.Also proximate composition of the individual flours before formulation  was analyzed, it ranged from 6.13 to 8.46 moisture, 2.00 to 4.67 ash, 0.17 to 8.00 fiber,5.47 to 8.61 fat, 7.57 to 21.84 protein, 58.34 to 69.27 carbohydrate.The sensory values ranged from 5.60 to 6.45 for taste; 4.25 to 6.85  for colour; 5.15 to 6.80 for texture; 3.85 to 5.70 for aroma; 5.45 to 6.45 acceptability. Sample 10 (with the ratio of 40:70:20) had the highest rating for general acceptability. It was observed that sample 1(with the ratio of 60:50:60) had the lowest rating in taste and aroma. The mixture components that could produce optimum texture was determined through optimization plot. This work has demonstrated that acceptable ‘fufu’ with moderate protein and carbohydrate could be successfully produced using composite flours of sorghum, millet and African yam bean.

scholarly journals Functional and Rheological Profile of LAB-fermented Bambara Groundnut (Vigna subterranean (L)) Flour

2021 ◽  
pp. 1-9
Author(s):  
C. O. Chude ◽  
C. C. Nwagbo ◽  
E. F. Okpalanma ◽  
B. O. Uba
Keyword(s):  
Particle Size ◽  
Water Absorption ◽  
Rheological Properties ◽  
Absorption Capacity ◽  
Bambara Groundnut ◽  
Water Absorption Capacity ◽  
Swelling Capacity ◽  
Flour Sample ◽  
Gelation Concentration

Lactic fermentation is commonly employed to improve protein digestibility and overall nutritional quality of grains foods. This study evaluated the functional and rheological properties of flour samples from Bambara groundnut fermented with Lactobacillus plantarum [NRRL B-4306] and Lactobacillus fermentum [NRRL B-1932] obtained from the United States Department of Agriculture. Functional profile such as particle size index, water absorption capacity, swelling capacity, and least gelation concentration of the flour were determined; as well, amylograph and maturograph evaluations were used to determine the rheological properties and the results presented as average, minimum, and maxi­mum values. Particle size determination observed that 150, 125, 105 µ orifice did not readily accommodate particles from the non-inoculated samples while the inoculated samples passed through 150 and 125 µ but did not readily pass through 105 µ orifice. Bioprocess with lactic acid bacteria increased the water absorption capacity of the flour samples from 346.5 to 386.4%, the least gelation concentration decreased from 5.3 to 4.1%, while swelling capacity increased from 14.9 to 23.2 mg/100 g for non-inoculated and inoculated flours, respectively. Rheological investigations show evaluations for amylograph and maturogram determinations. Values obtained for amylograph indicate that temperature at start of gelatinization was peak at 63.8 and 63.00C for non-fermented and LAB-fermented flour with no significant (p ˂ 0.05) difference, while temperature at maximum viscosity and maximum viscosity had significant (p ˂ 0.05) values of 92.1 and 76.00C, as well as 730 and 265 brabender units (BU), respectively. Thus, amylograph quality of the fermented flour sample was indicated by the maximum viscosity which is significantly higher in the case of non-inoculated flour sample. The maturograph evaluation also recorded the maturation behavior of the dough prepared from the test flours after the proofing time (fermentation rest) by means of a sensing probe which records the elasticity of the mature dough every 2 min and produces the typical zigzag form of the maturogram. This action was recorded in maturograph units (MU) on the strip-chart with values of 44 and 28 min for final proof time, 750 and 610 MU for dough level, 210 and 220 MU for dough elasticity, as well as 10 and 12 min for proofing stability, determined respectively for non-fermented and LAB-fermented flour samples. LAB-fermentation demonstrated to improve the functionality and rheology of Bambara groundnut flour and the production process could be further controlled to achieve products of optimal quality.

scholarly journals Studies of the Functional Properties of the Cortex and Pulp of Ripe and Unripe Berries of Solanum Aethiopicum Variety Striped Toga

2021 ◽  
pp. 62-73
Author(s):  
Fagbohoun Jean Bedel ◽  
Dan Chepo Ghislaine ◽  
Kone Fankroma Martial Thiery ◽  
Djedji Wilfried Frejus ◽  
Kouame Lucien Patrice
Keyword(s):  
Water Absorption ◽  
Functional Properties ◽  
Rainy Season ◽  
Chemical Properties ◽  
Absorption Capacity ◽  
Oil Absorption ◽  
Refined Oil ◽  
Solanum Aethiopicum ◽  
Physico Chemical ◽  
Biochemical Level

The African eggplant Solanum aethiopicum var. striped toga is a widely consumed vegetable-fruit in Côte d'Ivoire. Although produced in abundance in the rainy season, they are subject to post-harvest losses and these commodities are expensive in the dry season. Also during culinary preparations, the cortex is often removed for various reasons (difficulty to be crushed, aesthetics, presence in the stool...). This study was carried out by determining the functional properties of powders obtained from the cortex and pulp of blackberry and non blackberry berries. The apparent density was between 0.25 and 0.35g/mL with higher values in the cortex than in the pulp. The cortex powders had higher water absorption capacities than the pulp in both ripening levels (Cortex unripe (Cnm): 657.51% versus Pulp unripe (Pnm): 622.12% and Cortex ripe (Cm): 600.33% versus Pm: 486.26%). The oil absorption capacity of pulp was lower than that of cortex in unrefined and refined oil. After analysis, it appears that the powders obtained from the cortex have the same physico-chemical properties as those obtained from the pulp but at different proportions. Indeed, at the biochemical level, the eggplant (S. aethiopicum striped toga) cortexes contain the same compounds as the pulp but in small quantities.

scholarly journals Water Absorption Capacity Determines the Functionality of Vital Gluten Related to Specific Bread Volume

Foods ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 228
Author(s):  
Marina Schopf ◽  
Katharina Anne Scherf
Keyword(s):  
Water Absorption ◽  
Water Content ◽  
Wheat Flour ◽  
Specific Volume ◽  
Disulfide Bonds ◽  
Protein Composition ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Water Addition ◽  
Wheat Flours

Vital gluten is often used in baking to supplement weak wheat flours and improve their baking quality. Even with the same recipe, variable final bread volumes are common, because the functionality differs between vital gluten samples also from the same manufacturer. To understand why, the protein composition of ten vital gluten samples was investigated as well as their performance in a microbaking test depending on the water content in the dough. The gluten content and composition as well the content of free thiols and disulfide bonds of the samples were similar and not related to the specific bread volumes obtained using two dough systems, one based on a baking mixture and one based on a weak wheat flour. Variations of water addition showed that an optimal specific volume of 1.74–2.38 mL/g (baking mixture) and 4.25–5.49 mL/g (weak wheat flour) was reached for each vital gluten sample depending on its specific water absorption capacity.

Comparison of Bio and Eco-technologies with Chemical Methods for Pre-treatment of Flax Fibers: Impact on Fiber Properties

2014 ◽  
Vol 9 (4) ◽  
pp. 155892501400900 ◽  
Author(s):  
Sabela Camano ◽  
Nemeshwaree Behary ◽  
Philippe Vroman ◽  
Christine Campagne
Keyword(s):  
Water Absorption ◽  
Fiber Bundle ◽  
Glass Fibers ◽  
Fiber Surface ◽  
Pectate Lyase ◽  
High Water ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Flax Fibers ◽  
The Impact

Flax fibers, available as fiber bundles, are commonly used as fiber reinforcement in composite materials as a substitute for glass fibers. Pre-treatments are often necessary for improving fiber-resin adhesion, and also to facilitate fiber elementarization, and to improve fiber ability to be implemented in mechanical processes limiting fiber damages. This paper focuses on the impact of biotechnologies (effect of 2 different enzymes: a pectate lyase and a laccase) and of an ecotechnology (ultrasound with ethanol), compared to classical chemical pre-treatments (using aqueous NaOH and ammonia) on the final flax fiber bundle properties, before and after a carding process. Fiber surface properties (wettability and/or zeta potential values), fiber elementarization and mechanical properties vary with the type of treatment (chemical nature of product and conditions used). Fibers elementarised using pectate lyase and ultrasound/ethanol have a hydrophilic surface and a high water absorption capacity, and are also of highest quality in terms of increased fineness. Treatment with NaOH yields the poorest fiber bundle tenacity. Laccase enzyme yields long thick hydrophobic fibers having very low water absorption capacity, and the most neutral surface charge. Properties of flax fibers can be easily monitored using different pre-treatments resulting in fibers which would be suited for various final applications.

scholarly journals Experimental study on water level and absorption capacity in a radial well flow in a loess area

2018 ◽  
Vol 19 (5) ◽  
pp. 1313-1321
Author(s):  
Xuezhen Zhang ◽  
Aidi Huo ◽  
Jucui Wang
Keyword(s):  
Unsteady Flow ◽  
Water Absorption ◽  
Water Level ◽  
Steady Flow ◽  
Flow Injection ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Analysis Method ◽  
Semi Empirical ◽  
Radial Well

Abstract In this paper, the theoretical basis for flow calculation in an injection well was discussed. It proposed that the flow rate of an injection well could be calculated referring to pumping theory and method. A mathematical model of the rising curve of water level around a radial well was established and the equation for calculating the rising curve was given. The calculation equations selected for the water absorption capacity of injection wells were explained and examples were verified and compared. The results indicated that, under the same injection conditions, the water level value calculated by the analysis method was slightly larger, but the error between the analysis method and the semi-theoretical and semi-empirical methods was small. In the processes of steady flow injection and unsteady flow injection, there was a small difference of water absorption capacity, and the former was slightly larger. The measured values of water absorption capacity were only about one-third of the calculated values based on pumping theory. Overall, the analytical solution method for predicting the rising curve of water level has priority in well injection. The semi-theoretical and semi-empirical equation for calculating water absorption capacity sifted first has priority in steady flow injection, the equation sifted second has priority in unsteady flow injection.

scholarly journals Formation of porous ceramics using cullet and biological waste of water purification

2011 ◽  
Vol 43 (1) ◽  
pp. 81-94 ◽  
Author(s):  
M. Vlasova ◽  
I. Rosales ◽  
M. Kakazey ◽  
Parra Parra ◽  
R. Guardian
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Water Purification ◽  
Sintering Temperature ◽  
Porous Ceramics ◽  
Absorption Capacity ◽  
Water Absorption Capacity ◽  
Red Clay ◽  
Temperature Range

Porous ceramics (bricks) was obtained using red clay, milled fusible cullet, and biowaste in the temperature range 950-1000?C. The high content of water in biowaste eliminates the necessity of introducing water in soft mud forming of bricks. The porosity, water absorption capacity, and mechanical properties of the prepared ceramics depend on content of milled cullet and sintering temperature.

Sign in / Sign up

Export Citation Format

Share Document