scholarly journals Performance Evaluation of Continuous Flow Aerobic Granular Sludge Configurations

2019 ◽  
Vol 70 (1) ◽  
pp. 283-285
Author(s):  
Elena Elisabeta Manea ◽  
Costel Bumbac
Keyword(s):  
Wastewater Treatment ◽  
Continuous Flow ◽  
High Efficiency ◽  
Wastewater Treatment Plants ◽  
Granular Sludge ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Batch Reactors ◽  
Nutrients Removal ◽  
Flow Configurations

Increasing the efficiency and capacity of existing wastewater treatment plants can be carried out by using intensive biological processes. One of the currently studied biological solutions consists in using aerobic granular sludge in order to achieve both organics and nutrients removal simultaneously in one tank and with high efficiency. Aerobic granular sludge is currently used at full scale in sequential batch reactors, research for identifying the optimal solutions for continuous flow systems being carried out worldwide. The paper summarizes the results obtained for two continuous flow configurations with aerobic granular sludge, in terms of organics and nutrients removal for synthetic wastewater in laboratory conditions. Both experimental setups led to wastewater treatment efficiencies, with values ranging between 80 and 99% for COD, 85 and 99% for BOD5, 52 and 98% for NH4+ and 5 to 87% for TP.

scholarly journals Effect of Salinity on Cr(VI) Bioremediation by Algal-Bacterial Aerobic Granular Sludge Treating Synthetic Wastewater

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1400
Author(s):  
Bach Van Nguyen ◽  
Xiaojing Yang ◽  
Shota Hirayama ◽  
Jixiang Wang ◽  
Ziwen Zhao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Wastewater Treatment Plants ◽  
Inorganic Nitrogen ◽  
Granular Sludge ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Batch Reactors ◽  
Sequencing Batch Reactors ◽  
Conventional Activated Sludge ◽  
Total Inorganic Nitrogen

Heavy metal-containing wastewater with high salinity challenges wastewater treatment plants (WWTPs) where the conventional activated sludge process is widely applied. Bioremediation has been proven to be an effective, economical, and eco-friendly technique to remove heavy metals from various wastewaters. The newly developed algal-bacterial aerobic granular sludge (AGS) has emerged as a promising biosorbent for treating wastewater containing heavy metals, especially Cr(VI). In this study, two identical cylindrical sequencing batch reactors (SBRs), i.e., R1 (Control) and R2 (with 1% additional salinity), were used to cultivate algal-bacterial AGS and then to evaluate the effect of salinity on the performance of the two SBRs. The results reflected that less filamentation and a rougher surface could be observed on algal-bacterial AGS when exposed to 1% salinity, which showed little influence on organics removal. However, the removals of total inorganic nitrogen (TIN) and total phosphorus (TP) were noticeably impacted at the 1% salinity condition, and were further decreased with the co-existence of 2 mg/L Cr(VI). The Cr(VI) removal efficiency, on the other hand, was 31–51% by R1 and 28–48% by R2, respectively, indicating that salinity exposure may slightly influence Cr(VI) bioremediation. In addition, salinity exposure stimulated more polysaccharides excretion from algal-bacterial AGS while Cr(VI) exposure promoted proteins excretion.

Parameter Optimisation of Aerobic Granular Sludge at High Temperature Using Response Surface Methodology

2017 ◽  
Vol 7 (3) ◽  
pp. 1522 ◽  
Author(s):  
Syahira Ibrahim ◽  
Norhaliza Abdul Wahab ◽  
Aznah Nor Anuar ◽  
Mustafa Bob
Keyword(s):  
Response Surface Methodology ◽  
Wastewater Treatment ◽  
High Temperature ◽  
Response Surface ◽  
Treatment Plant ◽  
Granular Sludge ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Batch Reactors ◽  
Sequencing Batch Reactors

This paper proposes an improved optimisation of sequencing batch reactors (SBR) for aerobic granular sludge (AGS) at high temperature-low humidity for domestic wastewater treatment using response surface methodology (RSM). The main advantages of RSM are less number of experiment required and suitable for complex process. The sludge from a conventional activated sludge wastewater treatment plant and three sequencing batch reactors (SBRs) were fed with synthetic wastewater. The experiment were carried out at different high temperatures (30, 40 and 50°C) and the formation of AGS for simultaneous organics and nutrients removal were examined in 60 days. RSM is used to model and to optimize the biological parameters for chemical oxygen demand (COD) and total phosphorus removal in SBR system. The simulation results showed that at temperature of 45.33°C give the optimum condition for the total removal of COD and phosphorus, which correspond to performance index R<sup>2</sup> of 0.955 and 0.91, respectively.

Role of ammonia-oxidizing bacteria in micropollutant removal from wastewater with aerobic granular sludge

2015 ◽  
Vol 73 (3) ◽  
pp. 564-575 ◽  
Author(s):  
Jonas Margot ◽  
Samuel Lochmatter ◽  
D. A. Barry ◽  
Christof Holliger
Keyword(s):  
Wastewater Treatment Plants ◽  
Aerobic Condition ◽  
Granular Sludge ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Batch Reactors ◽  
Ammonia Oxidizing Bacteria ◽  
Sequencing Batch Reactors ◽  
Micropollutant Removal

Nitrifying wastewater treatment plants (WWTPs) are more efficient than non-nitrifying WWTPs to remove several micropollutants such as pharmaceuticals and pesticides. This may be related to the activity of nitrifying organisms, such as ammonia-oxidizing bacteria (AOBs), which could possibly co-metabolically oxidize micropollutants with their ammonia monooxygenase (AMO). The role of AOBs in micropollutant removal was investigated with aerobic granular sludge (AGS), a promising technology for municipal WWTPs. Two identical laboratory-scale AGS sequencing batch reactors (AGS-SBRs) were operated with or without nitrification (inhibition of AMOs) to assess their potential for micropollutant removal. Of the 36 micropollutants studied at 1 μg l−1 in synthetic wastewater, nine were over 80% removed, but 17 were eliminated by less than 20%. Five substances (bisphenol A, naproxen, irgarol, terbutryn and iohexol) were removed better in the reactor with nitrification, probably due to co-oxidation catalysed by AMOs. However, for the removal of all other micropollutants, AOBs did not seem to play a significant role. Many compounds were better removed in aerobic condition, suggesting that aerobic heterotrophic organisms were involved in the degradation. As the AGS-SBRs did not favour the growth of such organisms, their potential for micropollutant removal appeared to be lower than that of conventional nitrifying WWTPs.

scholarly journals Study on aerobic granular sludge formation in sequencing batch reactors for tapioca wastewater treatment

2013 ◽  
Vol 16 (1) ◽  
pp. 40-48
Author(s):  
Phuong Thi Thanh Nguyen ◽  
Phuoc Van Nguyen ◽  
Anh Cam Thieu
Keyword(s):  
Granular Sludge ◽  
Biomass Accumulation ◽  
Synthetic Wastewater ◽  
Aerobic Granular Sludge ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Batch Reactors ◽  
Aerobic Granules ◽  
Toxic Substances ◽  
Sequencing Batch Reactors

Aerobic granular sludge has attracted extensive interest of researchers since the 90s due to the advantages of aerobic granules such as good settling ability, high biomass accumulation, being resistant to high loads and being less affected by toxic substances. Studies, however, which have mainly been carried out on synthetic wastewater, cannot fully evaluate the actual ability of aerobic granules. Study on aerobic granular sludge was performed in sequencing batch reactors, using seeding sludge taken from anaerobic sludge and tapioca wastewater as a substrates. After 11 weeks of operation, the granules reached the stable diameter of 2- 3 mm at 3.7 kgCOD/m3.day organic loading rate. At high organic loads, in range of 1.6 - 5 kgCOD/m3.day, granules could treat effectively COD, N, P with performance of 93 – 97%; 65 – 79% and 80 – 95%, respectively.

scholarly journals Characterizing the structure of aerobic granular sludge using ultra-high field magnetic resonance

2020 ◽  
Vol 82 (4) ◽  
pp. 627-639
Author(s):  
Catherine M. Kirkland ◽  
Julia R. Krug ◽  
Frank J. Vergeldt ◽  
Lenno van den Berg ◽  
Aldrik H. Velders ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Magnetic Resonance ◽  
Wastewater Treatment Plants ◽  
Granular Sludge ◽  
Structural Features ◽  
Aerobic Granular Sludge ◽  
Aerobic Granules ◽  
Bulk Fluid ◽  
Characterization Methods ◽  
Non Invasive

Abstract Despite aerobic granular sludge wastewater treatment plants operating around the world, our understanding of internal granule structure and its relation to treatment efficiency remains limited. This can be attributed in part to the drawbacks of time-consuming, labor-intensive, and invasive microscopy protocols which effectively restrict samples sizes and may introduce artefacts. Time-domain nuclear magnetic resonance (NMR) allows non-invasive measurements which describe internal structural features of opaque, complex materials like biofilms. NMR was used to image aerobic granules collected from five full-scale wastewater treatment plants in the Netherlands and United States, as well as laboratory granules and control beads. T1 and T2 relaxation-weighted images reveal heterogeneous structures that include high- and low-density biofilm regions, water-like voids, and solid-like inclusions. Channels larger than approximately 50 μm and connected to the bulk fluid were not visible. Both cluster and ring-like structures were observed with each granule source having a characteristic structural type. These structures, and their NMR relaxation behavior, were stable over several months of storage. These observations reveal the complex structures within aerobic granules from a range of sources and highlight the need for non-invasive characterization methods like NMR to be applied in the ongoing effort to correlate structure and function.

Simulation of Aerobic Granular Sludge Process Efficiency

2017 ◽  
Vol 68 (8) ◽  
pp. 1723-1725
Author(s):  
Elena Elisabeta Manea ◽  
Costel Bumbac ◽  
Olga Tiron ◽  
Razvan Laurentiu Dinu ◽  
Valeriu Robert Badescu
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Batch Reactor ◽  
Granular Sludge ◽  
Process Efficiency ◽  
Aerobic Granular Sludge ◽  
Organic Load ◽  
Batch Reactors ◽  
Conventional Activated Sludge ◽  
Pollutants Removal

Using aerobic granular sludge for wastewater treatment has multiple advantages compared to conventional activated sludge systems, most important being the ability of simultaneous removal of the pollutants responsible for eutrophication: organic load, compounds of nitrogen (NH4+; NO3-) and phosphorus (PO43-). The advantages are currently exploited for developing the next generation of wastewater treatment systems while the identified limitations are approached by experimental and theoretical researches worldwide. The aim of the study consists in evaluating the possibility of predicting the system�s response to different changes in the influent wastewater loadings. The paper presents simulations results backed up by experimental data for pollutants removal efficiencies evaluation for a sequential batch reactor (SBR) with aerobic granular sludge. The mathematical model is based on the activated sludge model no. 3, which was updated by considering the simultaneous biological nitrification (NH4+NO3) and denitrification (NO3-N2) processes, thus complying with the biochemical reactions occurring in aerobic granular sludge sequential batch reactors. The model developed was validated by the experimental results obtained on a laboratory scale SBR monitored for over a month.

scholarly journals Enrichment of phosphate-accumulating organisms (PAOs) in a microfluidic model biofilm system by mimicking a typical aerobic granular sludge feast/famine regime

2022 ◽  
Author(s):  
Edina Klein ◽  
Janek Weiler ◽  
Michael Wagner ◽  
Minja Čelikić ◽  
Christof M. Niemeyer ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Granular Sludge ◽  
Amplicon Sequencing ◽  
Model System ◽  
Aerobic Granular Sludge ◽  
Small Scale ◽  
Batch Reactors ◽  
Nitrogen And Phosphorus ◽  
Sampling Device ◽  
Polyphosphate Accumulating Organisms

Abstract Wastewater treatment using aerobic granular sludge has gained increasing interest due to its advantages compared to conventional activated sludge. The technology allows simultaneous removal of organic carbon, nitrogen, and phosphorus in a single reactor system and is independent of space-intensive settling tanks. However, due to the microscale, an analysis of processes and microbial population along the radius of granules is challenging. Here, we introduce a model system for aerobic granular sludge on a small scale by using a machine-assisted microfluidic cultivation platform. With an implemented logic module that controls solenoid valves, we realized alternating oxic hunger and anoxic feeding phases for the biofilms growing within. Sampling during ongoing anoxic cultivation directly from the cultivation channel was achieved with a robotic sampling device. Analysis of the biofilms was conducted using optical coherence tomography, fluorescence in situ hybridization, and amplicon sequencing. Using this setup, it was possible to significantly enrich the percentage of polyphosphate-accumulating organisms (PAO) belonging to the family Rhodocyclaceae in the community compared to the starting inoculum. With the aid of this miniature model system, it is now possible to investigate the influence of a multitude of process parameters in a highly parallel way to understand and efficiently optimize aerobic granular sludge-based wastewater treatment systems.Key points• Development of a microfluidic model to study EBPR.• Feast-famine regime enriches polyphosphate-accumulating organisms (PAOs).• Microfluidics replace sequencing batch reactors for aerobic granular sludge research.

scholarly journals Formation and characteristics of filamentous granular sludge

2020 ◽  
Author(s):  
Wenjing Cheng ◽  
Liguo Zhang ◽  
Wenjie Xu ◽  
Yichen Sun ◽  
Junfeng Wan ◽  
...  
Keyword(s):  
Organic Matter ◽  
Wastewater Treatment ◽  
Microbial Diversity ◽  
Removal Efficiency ◽  
Granular Sludge ◽  
Aerobic Granular Sludge ◽  
Nutrients Removal ◽  
Toc Removal ◽  
Removal Efficiencies ◽  
Research Hotspots

Abstract Aerobic granular sludge process as a promising biotechnology has been one of the research hotspots in the area of wastewater treatment during the last two decades. In our study, after around 60 days' operation, filamentous granular sludge (FGS) was formed under low aeration (SAV = 0.085 cm/s) and multi-feeding conditions. The characteristics of FGS and the performance of the FGS system for organic matter and nutrients removal were investigated. The results showed that COD and TOC removal efficiencies were relatively stable, while COD removal efficiency increased from 82% to 94% in the presence of sulfamethoxazole (SMZ) at low concentration (1 mg/L). At the same time, the TP removal efficiency could be improved and maintained at around 75%, while TN removal efficiency was flocculated at around 50%. The analysis of microbial diversity showed that Thiothrix and Trichococcus as typical filamentous species were detected and dominant in the FGS system. The abundance of Thiothrix increased from 15% to 34%, while Trichococcus decreased from 23% to 3% in the presence of SMZ.

Sign in / Sign up

Export Citation Format

Share Document