scholarly journals DESIGN AND DEVELOPMENT OF THE SOFTWARE COMPLEX FOR AUTOMATIC SELECTION OF PUMPING STATIONS OF WATER SUPPLY AND FORMATION OF TECHNICAL AND COMMERCIAL PROPOSALS

2021 ◽  
pp. 105-114
Author(s):  
Дмитрий Викторович Титарев ◽  
Максим Владиславович Трунников ◽  
Павел Юрьевич Володин
Keyword(s):  
Water Supply ◽  
Flow Rate ◽  
Software Package ◽  
Design And Development ◽  
Automatic Calculation ◽  
Software Complex ◽  
Pumping Station ◽  
Calculation Of Parameters ◽  
Pumping Stations ◽  
Selection Of

Работа посвящена вопросам проектирования и разработки программного комплекса для автоматического расчета параметров и дальнейшего подбора станций водоснабжения. На основе проведенных расчетов программный комплекс позволяет формировать технико-коммерческое предложение на поставляемое оборудование. Особое внимание уделено подбору параметров насосной станции согласно данным о напоре и расходе в рабочей точке. Это является важной задачей в условиях отсутствия полноты данных, предоставляемых производителями оборудования. The work is devoted to the design and development of a software package for automatic calculation of parameters and further selection of water supply stations. Based on the calculations performed, the software package allows you to form a technical and commercial proposal for the equipment supplied. Particular attention is paid to the selection of the parameters of the pumping station according to the data on the head and flow rate at the operating point. This is an important task in the absence of completeness of data provided by equipment manufacturers.

MODERNIZATION OF THE PUMPING STATION OF TECHNICAL WATER SUPPLY ON THE EXAMPLE OF JSC «OMSK KAUCHUK»

2021 ◽  
pp. 111-116
Author(s):  
YU. V. КОRCHEVSKAYA ◽  
◽  
I. A. TROTSENKO ◽  
E. E. NAZARKIN
Keyword(s):  
Energy Consumption ◽  
Water Supply ◽  
High Energy ◽  
Pumping Station ◽  
Operating Modes ◽  
Pumping Stations ◽  
Effi Ciency ◽  
Pumping Equipment ◽  
Inefficient Operation ◽  
Sanitation Systems

Since reducing energy consumption is a priority for an enterprise, economic effi ciency in general is directly related to the use of pumping equipment. The demand for electricity for pumping equipment will depend on various factors: the operating modes of pumping stations and installations, the equipment used measures to reduce the cost of electricity consumed, etc. The current practice indicates extremely inefficient operation of pumping equipment. Currently, a large number of pumping stations of water supply and sanitation systems operate in an uneconomical mode. Very often, this is due to incorrect selection of pumping equipment, outdated pumping equipment, the operation of pumps in non- calculation mode. In addition, pumping equipment has been installed in many industries since the establishment of production. Such equipment is morally and technically outdated. Now,technological progress allows us to use more efficient equipment and materials that allow us to reduce energy consumption. The article presents an analysis of the energy consumption of a pumping station of technical water supply on the example of JSC «Omsk Kauchuk», a variant of modernization is proposed in order to reduce the consumption of electricity by pumping equipment. The need to modernize the pumping station of technical water supply is associated with a significant service life and high –energy consumption of pumping equipment. Two pump brands were selected and a comparative analysis was carried out. Based on calculations of energy consumption and technological characteristics, the most profitable and optimal version of the D6300-80-2b pump was chosen, since the pump performance is greater and the power consumption is less than that of the JETEX DS600-750 pump, as well as reducing the wear rate of operating elements, improving the pump’s suction capacity

Selection of Hot Water Supply Metering Devices for Residential Buildings

2015 ◽  
Vol 725-726 ◽  
pp. 1267-1272 ◽  
Author(s):  
Viktor Pukhkal ◽  
Boris Jurmanov
Keyword(s):  
Water Supply ◽  
Flow Rate ◽  
Water Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Hot Water ◽  
Water Supply Systems ◽  
Hot Water Supply ◽  
Selection Of ◽  
Water Meter

Experimental measurements of actual hot water consumption in residential building have been performed. It was established that distribution of hot water for domestic needs has random character and constitutes non-stationary process. It was proposed for hot water supply systems calculation to employ “rated mode of water consumption”. Rated mode is a simplified mathematical description of entire ordered collection of hourly consumptions anticipated during rated period of hot water supply system operation. Most precise description of water consumption rated mode may be obtained with coefficient of general hourly discontinuity at 98% coverage. Selection of hot water metering devices for residential house requires that operating flow rate of water meter should correspond by maximum to residential building water consumption parameters. Methods of calculation of daily water volumes passing through water meter at flow rates lower than transient flow rate value for the specified device were proposed.

Research on the Field Test Methods of Flow Rate and Water Level of Urban Drainage Pumping Stations

2013 ◽  
Vol 718-720 ◽  
pp. 903-907
Author(s):  
Jian Gang Feng ◽  
Li Feng Bu ◽  
You Wei Xu ◽  
Bin Mao
Keyword(s):  
Water Level ◽  
Field Test ◽  
Flow Rate ◽  
Measurement Method ◽  
Test Methods ◽  
Test Case ◽  
Urban Drainage ◽  
Measure Flow Rate ◽  
Pumping Station ◽  
Pumping Stations

The flow rate and water level measure is one key work of the pumping station field test. And the reliable, applicable, economic and effective measurement method and instruments are the key decisive factors of the field test. The urban drainage pumping stations usually pump sewage, and its inlet structure and outlet structure generally use closed arrangement. These make the flow rate and water level measurement of the field test become complicated. Based on the characteristics of urban drainage pumping station, this paper analyzed the measurement methods of flow rate and water level parameters of the field test for urban drainage pumping station. In combination with a field test case for an urban drainage pumping station, this paper demonstrated how to choose the reliable, applicable, economic and effective measurement method to measure flow rate and water level parameters.

INFLUENCE OF MSW LANDFILLS ON DEGRADATION OF BIOGEOCENOSES OF COASTAL ZONES OF WATER COURSES AND THE BLACK SEA

2021 ◽  
pp. 117-124
Author(s):  
N. K. GUDKOVA ◽  
◽  
T. L. GORBUNOVA ◽  
N. I. МАTOVA
Keyword(s):  
Energy Consumption ◽  
Water Supply ◽  
High Energy ◽  
The Black Sea ◽  
Coastal Zones ◽  
Pumping Station ◽  
Operating Modes ◽  
Pumping Stations ◽  
Pumping Equipment ◽  
Inefficient Operation

Since reducing energy consumption is a priority for an enterprise, economic effi ciency in general is directly related to the use of pumping equipment. The demand for electricity for pumping equipment will depend on various factors: the operating modes of pumping stations and installations, the equipment used measures to reduce the cost of electricity consumed, etc. The current practice indicates extremely inefficient operation of pumping equipment. Currently, a large number of pumping stations of water supply and sanitation systems operate in an uneconomical mode. Very often, this is due to incorrect selection of pumping equipment, outdated pumping equipment, the operation of pumps in non- calculation mode. In addition, pumping equipment has been installed in many industries since the establishment of production. Such equipment is morally and technically outdated. Now,technological progress allows us to use more efficient equipment and materials that allow us to reduce energy consumption. The article presents an analysis of the energy consumption of a pumping station of technical water supply on the example of JSC «Omsk Kauchuk», a variant of modernization is proposed in order to reduce the consumption of electricity by pumping equipment. The need to modernize the pumping station of technical water supply is associated with a significant service life and high –energy consumption of pumping equipment. Two pump brands were selected and a comparative analysis was carried out. Based on calculations of energy consumption and technological characteristics, the most profitable and optimal version of the D6300-80-2b pump was chosen, since the pump performance is greater and the power consumption is less than that of the JETEX DS600-750 pump, as well as reducing the wear rate of operating elements, improving the pump’s suction capacity

scholarly journals Optimization of Energy Consumption in the Pumping Station Supplying Two Zones of the Water Supply System

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 310
Author(s):  
Martyna Świętochowska ◽  
Izabela Bartkowska
Keyword(s):  
Energy Consumption ◽  
Water Supply ◽  
Energy Optimization ◽  
Field Tests ◽  
Supply System ◽  
Water Supply System ◽  
Pumping Station ◽  
Water Pumping ◽  
System Pressure ◽  
Pumping Stations

Water supply pumping stations are among the main energy-consuming elements in the water supply system. The energy optimization of a pumping station can significantly affect the energy consumption of a water utility. This article deals with the energy optimization of water pumping stations. The work assumes several variants of optimization of water supply pumping stations through changes in the water supply system, pressure changes in the pumping station, and modification of the number of pumps. After analyzing the network, conducting field tests, and creating a model of the water supply network, the network was calibrated in order to reproduce the existing water network as accurately as possible. Then, a variant analysis was performed, and the best optimization method for the pumping station was selected. In two variants, there was a decrease in electricity consumption; in three there, was an increase; in one, there was no change. By connecting the DMA zones and modifying the pressure in the pumping station, the energy consumption of the pumping stations was reduced. On this basis, it was found that it is possible to optimize the water pumping station by modifying the pumping station and work related to the network layout.

APPLICATION OF OPTIMIZATION OF SPECIFIED PARAMETERS OF THE ACCIDENT-RESISTANT FUEL SYSTEM OF THE HELICOPTER IN SIMINTECH SOFTWARE PACKAGE

2020 ◽  
pp. 7-13
Author(s):  
D. I. Smagin ◽  
K. S. Napreenko ◽  
R. S. Savel’ev ◽  
S. V. Grachev
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Life Cycle ◽  
Software Package ◽  
Operation Mode ◽  
Design Stage ◽  
Fuel System ◽  
Software Complex ◽  
High Degree ◽  
Selection Of

The process of creating an accident-resistant fuel system (AFS) of a helicopter using mathematical modeling is considered. Possibility of applying optimization algorithms in mathematical modeling of parameters of units of accident-resistant fuel system of helicopter in domestic software complex SimInTech is studied. An approach to solving the problem of optimizing given parameters, both in theory and in practice, is described. Results of the simplest optimization of AFS parameters for nominal operation mode are covered, examples of algorithms for selection of unit parameters are shown. This method of researching the system will allow, with a high degree of accuracy, to determine the necessary parameters at the design stage of the system. It is worth noting that the functionality of the developed dynamic mathematical model in the SimInTech software package is sufficient to perform tasks not only of the conceptual design stage, but also of the subsequent stages of the AFS life cycle.

Fuzzy Method Applied at Energetic and Economic Rehabilitation of Pumping Station

2021 ◽  
Author(s):  
Victorita Radulescu
Keyword(s):  
Water Supply ◽  
Industrial Development ◽  
Treatment Plant ◽  
Single Layer ◽  
Point Of View ◽  
Economic Point ◽  
Pumping Station ◽  
Water Pumping ◽  
Pumping Stations ◽  
Double Spiral

Abstract Many pumping stations require an urgent rehabilitation from hydraulic, energetic, and economic point of view, being older than 30 years. Some urban stations for the water supply are nowadays under-dimensioned compared with the necessary consumption. Such an example is the pumping station of the Buzau City, realized in 1986. Its population has grown in the last decades by about 30% due to industrial development and its water pumping station from the treatment plant is currently totally insufficient. The hydraulic losses through the control discharge valve have become too high. This pumping station ensures the water supply for the south and east part of the city. Firstly, some characteristics of the pumping station equipped with pumps 12NDS- Normal-Double spiral casing-Single-layer of 160kW and 18NDS of 400kW and 500 kW, all from domestic production, are presented. Modernization of the pumping station has started few years ago and being realized in steps, so as not interrupt the city’s water supply. To establish the optimal operating point some algorithms are presented, developed based on the experimental data and using functions with one or two independent variables. Firstly, the interpolation function is determined, followed by its numerical calculation. To establish the characteristics’ equations H = f(Q), P = f(Q), and η = f(Q) starting from experimental results obtained by direct measurements, a polynomial approximation was chosen by the method of the least squares, using the polynomials Lagrange and Bezier. For optimization, the fuzzy technique is adopted regarding the flow fusing, intervals between start and stop following some policies concerning the aggregates’ starting. For a year, the energy saved between these intervals was calculated. Finally, the obtained yields of about 90% proved that the pumps modernization adopting new functioning techniques is more advantageous in some situations than the purchase of new equipment.

scholarly journals AUTOMATION OF THE RESIDENTIAL BUILDING WATER SUPPLY SYSTEM PUMPING STATION

2016 ◽  
Vol 8 (2) ◽  
Author(s):  
A. M. Kulia
Keyword(s):  
Water Supply ◽  
Automatic Control ◽  
Residential Building ◽  
Rotation Frequency ◽  
Supply System ◽  
Water Supply System ◽  
Pumping Station ◽  
Dwelling House ◽  
Pumping Stations ◽  
Effective System

Essence of process of water-supply of apartment dwelling house is considered. The existent state over of automation of the pumping stations is brought. The task of development of the effective system of automatic control is put by them. Possibility of decision of task is shown by the use in the system of frequency transformer that feeds the electrodrives of pumps, and also due to perfection of algorithms of the pumps rotation frequency adjusting and logical management of their switching a sequence. The practical value of the use of the system is to increase dynamic.

CONTEMPORARY ASPECTS IN THE SELECTION OF TOOLS AND TECHNOLOGIES FOR DEVELOPING WEB SITES

2018 ◽  
pp. 125-131
Author(s):  
Petar Halachev ◽  
Aleksandra Todeva ◽  
Gergana Georgieva ◽  
Marina Jekova
Keyword(s):  
Programming Languages ◽  
Web Sites ◽  
Web Site ◽  
Work Process ◽  
Design And Development ◽  
Site Development ◽  
Complicated Process ◽  
The Creation ◽  
Guidelines And Recommendations ◽  
Selection Of

he report explores and analyzes the application of the most popular programming languages from different organizations: GitHub; Stackoverflow; the TIOBE's Community index. The main client technologies: HTML; CSS; JavaScript; Typescript are presented and analysed. Features are characterized and the advantages and the disadvantages of the server technologies are described: Java; PHP; Python; Ruby. The application areas for web site development technologies have been defined. The creation of a quality web site is a complex and complicated process, but by observing some guidelines and recommendations in the work process can help to select the tools and the technologies in its design and development.

Sign in / Sign up

Export Citation Format

Share Document